- 09 2月, 2015 1 次提交
-
-
由 Hans-Christian Egtvedt 提交于
This patch runs all the default configurations through make silentoldconfig and make savedefconfig to rinse out outdated kconfig entries. for config in arch/avr32/configs/*defconfig; do make ARCH=avr32 `basename $config` make ARCH=avr32 silentoldconfig make ARCH=avr32 savedefconfig cp defconfig $config done Signed-off-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
-
- 09 7月, 2014 1 次提交
-
-
由 Alexandre Belloni 提交于
Now that all boards have switched to the generic PWM framework, update the defconfigs to use it. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 10 12月, 2013 1 次提交
-
-
由 Eunbong Song 提交于
This patch removes CONFIG_MTD_PARTITIONS in config files for avr32. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b2. Signed-off-by: NEunbong Song <eunb.song@samsung.com> Acked-by: NHans-Christian Egtvedt <hegtvedt@cisco.com>
-
- 10 4月, 2013 1 次提交
-
-
由 Viresh Kumar 提交于
This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 08 11月, 2012 1 次提交
-
-
由 Michal Nazarewicz 提交于
The File-backed Storage Gadget (g_file_storage) is being removed, since it has been replaced by Mass Storage Gadget (g_mass_storage). This commit changes defconfigs point to the new gadget. Signed-off-by: NMichal Nazarewicz <mina86@mina86.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> (AT91) Acked-by: Tony Lindgren <tony@atomide.com> (OMAP1) Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> (AVR32) Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 14 6月, 2011 1 次提交
-
-
由 Hans-Christian Egtvedt 提交于
This patch makes sure the kconfig option CC_OPTIMIZE_FOR_SIZE is set to yes for all default configuration files. This ensures the kernel is optimized for size, and avoids potential relocation truncated to fit problems. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
- 14 1月, 2011 2 次提交
-
-
由 Hans-Christian Egtvedt 提交于
This patch adjusts some values to make the default configuration for Atmel boards more similar, and adds missing values to enable required functions. Also remove defined symbols for functions not in use. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
由 Hans-Christian Egtvedt 提交于
This patch will disable kprobes for all the default AVR32 board configurations. This works around a regression in kprobes which seems to be related to AVR32 is now lacking the struct kprobe_ctlblk. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
- 15 8月, 2010 1 次提交
-
-
由 Sam Ravnborg 提交于
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 15 12月, 2009 1 次提交
-
-
由 Hans-Christian Egtvedt 提交于
This patch updates the default configuration for ATNGW100 (also for the EVKLCD10X configs), ATSTK1002 and ATSTK1006. By default all kernels will now have support for EXT2/3/4 out of the box, this is handy if the user wants to boot from SD-Card. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
- 27 1月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
-
- 06 1月, 2009 1 次提交
-
-
由 Ben Nizette 提交于
In the defconfigs for ATNGW100 and ATSTK100[236] the DMA Test driver is compiled as a module. This means systems built with *_defconfig + CONFIG_MODULES=n are unusable as the 3 dma test channels monopolise the CPU. I 'spose Haavard uses this module a lot but IMO it isn't really something needed on all eval boards by default. Signed-off-by: NBen Nizette <bn@niasdigital.com> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
- 08 8月, 2008 1 次提交
-
-
由 Haavard Skinnemoen 提交于
Enable power management, DMA and MMC on all boards except ATSTK1004, and add defconfig for the new ATSTK1006 board with NAND flash, UBI and UBIFS enabled as well. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
- 26 5月, 2008 1 次提交
-
-
由 Haavard Skinnemoen 提交于
Just provide reasonable defaults for the new stuff. Tickless and hrtimers are turned on for all boards except ATSTK1004. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
- 25 1月, 2008 2 次提交
-
-
由 Haavard Skinnemoen 提交于
Turn off a few useless options, enable a few useful ones and enable quite a few new drivers. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
These are derivatives of the AT32AP7000 chip, which means that most of the code stays the same. Rename a few files, functions, definitions and config symbols to reflect that they apply to all AP700x chips, and exclude some platform devices from chips where they aren't present. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
- 23 6月, 2007 1 次提交
-
-
由 Haavard Skinnemoen 提交于
Update defconfigs for ATNGW100 and ATSTK1002. This will enable the SLUB allocator by default on both, and will enable NFS root on ATSTK1002 (ATNGW100 had it enabled before.) Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
- 26 1月, 2007 1 次提交
-
-
由 Haavard Skinnemoen 提交于
Enable the Atmel MACB ethernet driver by default on ATSTK1000. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
- 26 10月, 2006 1 次提交
-
-
由 Haavard Skinnemoen 提交于
Sync atstk1002_defconfig with latest git, turn off non-existent drivers and enable a few more userspace-visible options like SysV IPC and inotify support. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 10月, 2006 1 次提交
-
-
由 Haavard Skinnemoen 提交于
Rename the following Kconfig symbols: * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 9月, 2006 1 次提交
-
-
由 Haavard Skinnemoen 提交于
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000 CPU and the AT32STK1000 development board. AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applications, with particular emphasis on low power consumption and high code density. The AVR32 architecture is not binary compatible with earlier 8-bit AVR architectures. The AVR32 architecture, including the instruction set, is described by the AVR32 Architecture Manual, available from http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It features a 7-stage pipeline, 16KB instruction and data caches and a full Memory Management Unit. It also comes with a large set of integrated peripherals, many of which are shared with the AT91 ARM-based controllers from Atmel. Full data sheet is available from http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf while the CPU core implementation including caches and MMU is documented by the AVR32 AP Technical Reference, available from http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf Information about the AT32STK1000 development board can be found at http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918 including a BSP CD image with an earlier version of this patch, development tools (binaries and source/patches) and a root filesystem image suitable for booting from SD card. Alternatively, there's a preliminary "getting started" guide available at http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links to the sources and patches you will need in order to set up a cross-compiling environment for avr32-linux. This patch, as well as the other patches included with the BSP and the toolchain patches, is actively supported by Atmel Corporation. [dmccr@us.ibm.com: Fix more pxx_page macro locations] [bunk@stusta.de: fix `make defconfig'] Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave McCracken <dmccr@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 2月, 2006 1 次提交
-
-
由 Grant C. Likely 提交于
Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 1月, 2006 1 次提交
-
-
由 Hirokazu Takata 提交于
This patch is for supporting a new target platform, Renesas M32104UT evaluation board. The M32104UT is an eval board based on an uT-Engine specification. This board has an MMU-less M32R family processor, M32104. http://www-wa0.personal-media.co.jp/pmc/archive/te/te_m32104_e.pdf This board is one of the most popular M32R platform, so we have ported Linux/M32R to it. Signed-off-by: NNaoto Sugai <Sugai.Naoto@ak.MitsubishiElectric.co.jp> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 1 次提交
-
-
由 Hirokazu Takata 提交于
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-