Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 15 6月, 2019 5 次提交
    • A
      ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA · a2e661f9
      由 Andrey Smirnov 提交于 
      [ Upstream commit cc839d0f8c284fcb7591780b568f13415bbb737c ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      a2e661f9
    • A
      ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA · 461f4183
      由 Andrey Smirnov 提交于 
      [ Upstream commit 28c168018e0902c67eb9c60d0fc4c8aa166c4efe ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      461f4183
    • A
      ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA · 998860d0
      由 Andrey Smirnov 提交于 
      [ Upstream commit b7b4fda2636296471e29b78c2aa9535d7bedb7a0 ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      998860d0
    • A
      ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA · 70465bbb
      由 Andrey Smirnov 提交于 
      [ Upstream commit 918bbde8085ae147a43dcb491953e0dd8f3e9d6a ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      70465bbb
    • A
      ARM: prevent tracing IPI_CPU_BACKTRACE · e0c3fc1f
      由 Arnd Bergmann 提交于 
      [ Upstream commit be167862ae7dd85c56d385209a4890678e1b0488 ]

Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.

This patch (of 11):

When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():

  arch/arm/kernel/smp.c: In function 'raise_nmi':
  arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
    trace_ipi_raise(target, ipi_types[ipinr]);

This is a correct warning as we actually overflow the array here.

This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace.  For clarification, I'm
also adding a two new code comments describing how this one is special.

The warning appears to have shown up after commit e7273ff4 ("ARM:
8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the
number assignment from '15' to '8', but as far as I can tell has existed
since the IPI tracepoints were first introduced.  If we decide to
backport this patch to stable kernels, we probably need to backport
e7273ff4 as well.

[yamada.masahiro@socionext.com: rebase on v5.1-rc1]
Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com
Fixes: e7273ff4 ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI")
Fixes: 365ec7b1 ("ARM: add IPI tracepoints") # v3.17
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      e0c3fc1f
  3. 04 6月, 2019 1 次提交
  5. 31 5月, 2019 1 次提交
  7. 22 5月, 2019 4 次提交
  9. 17 5月, 2019 1 次提交
  11. 08 5月, 2019 4 次提交
  13. 04 5月, 2019 6 次提交
    • S
      ARM: davinci: fix build failure with allnoconfig · 6222f1c6
      由 Sekhar Nori 提交于 
      [ Upstream commit 2dbed152e2d4c3fe2442284918d14797898b1e8a ]

allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.

Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Reviewed-by: NDavid Lechner <david@lechnology.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
      6222f1c6
    • M
      ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi · abd76731
      由 Masanari Iida 提交于 
      [ Upstream commit 41b37f4c0fa67185691bcbd30201cad566f2f0d1 ]

This patch fixes a spelling typo.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Fixes: cc42603d ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support")
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
      abd76731
    • M
      ARM: dts: pfla02: increase phy reset duration · c6694e7c
      由 Marco Felsch 提交于 
      [ Upstream commit 032f85c9360fb1a08385c584c2c4ed114b33c260 ]

Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):

  Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
  small percentage of modules have 'transmission timeouts' errors like

  barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
  warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
  eth0: 1000Mbps full duplex link detected
  eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout

Cc: Stefan Christ <s.christ@phytec.de>
Cc: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Fixes: 3180f956 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
      c6694e7c
    • M
      KVM: arm/arm64: vgic-its: Take the srcu lock when writing to guest memory · 0371fa03
      由 Marc Zyngier 提交于 
      [ Upstream commit a6ecfb11bf37743c1ac49b266595582b107b61d4 ]

When halting a guest, QEMU flushes the virtual ITS caches, which
amounts to writing to the various tables that the guest has allocated.

When doing this, we fail to take the srcu lock, and the kernel
shouts loudly if running a lockdep kernel:

[   69.680416] =============================
[   69.680819] WARNING: suspicious RCU usage
[   69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted
[   69.682096] -----------------------------
[   69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[   69.683225]
[   69.683225] other info that might help us debug this:
[   69.683225]
[   69.683975]
[   69.683975] rcu_scheduler_active = 2, debug_locks = 1
[   69.684598] 6 locks held by qemu-system-aar/4097:
[   69.685059]  #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[   69.686087]  #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[   69.686919]  #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.687698]  #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.688475]  #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.689978]  #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.690729]
[   69.690729] stack backtrace:
[   69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18
[   69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[   69.692831] Call trace:
[   69.694072]  lockdep_rcu_suspicious+0xcc/0x110
[   69.694490]  gfn_to_memslot+0x174/0x190
[   69.694853]  kvm_write_guest+0x50/0xb0
[   69.695209]  vgic_its_save_tables_v0+0x248/0x330
[   69.695639]  vgic_its_set_attr+0x298/0x3a0
[   69.696024]  kvm_device_ioctl_attr+0x9c/0xd8
[   69.696424]  kvm_device_ioctl+0x8c/0xf8
[   69.696788]  do_vfs_ioctl+0xc8/0x960
[   69.697128]  ksys_ioctl+0x8c/0xa0
[   69.697445]  __arm64_sys_ioctl+0x28/0x38
[   69.697817]  el0_svc_common+0xd8/0x138
[   69.698173]  el0_svc_handler+0x38/0x78
[   69.698528]  el0_svc+0x8/0xc

The fix is to obviously take the srcu lock, just like we do on the
read side of things since bf308242. One wonders why this wasn't
fixed at the same time, but hey...

Fixes: bf308242 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
      0371fa03
    • W
      ARM: imx51: fix a leaked reference by adding missing of_node_put · 2cbb465e
      由 Wen Yang 提交于 
      [ Upstream commit 0c17e83fe423467e3ccf0a02f99bd050a73bbeb4 ]

The call to of_get_next_child returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./arch/arm/mach-imx/mach-imx51.c:64:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 57, but without a corresponding object release within this function.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
      2cbb465e
    • H
      ARM: dts: bcm283x: Fix hdmi hpd gpio pull · d52dfdf1
      由 Helen Koike 提交于 
      [ Upstream commit 544e784188f1dd7c797c70b213385e67d92005b6 ]

Raspberry pi board model B revison 2 have the hot plug detector gpio
active high (and not low as it was in the dts).
Signed-off-by: NHelen Koike <helen.koike@collabora.com>
Fixes: 49ac67e0 ("ARM: bcm2835: Add VC4 to the device tree.")
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
      d52dfdf1
  15. 02 5月, 2019 1 次提交
    • A
      ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache · 478afe34
      由 Ard Biesheuvel 提交于 
      commit e17b1af96b2afc38e684aa2f1033387e2ed10029 upstream.

The EFI stub is entered with the caches and MMU enabled by the
firmware, and once the stub is ready to hand over to the decompressor,
we clean and disable the caches.

The cache clean routines use CP15 barrier instructions, which can be
disabled via SCTLR. Normally, when using the provided cache handling
routines to enable the caches and MMU, this bit is enabled as well.
However, but since we entered the stub with the caches already enabled,
this routine is not executed before we call the cache clean routines,
resulting in undefined instruction exceptions if the firmware never
enabled this bit.

So set the bit explicitly in the EFI entry code, but do so in a way that
guarantees that the resulting code can still run on v6 cores as well
(which are guaranteed to have CP15 barriers enabled)

Cc: <stable@vger.kernel.org> # v4.9+
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      478afe34
  17. 20 4月, 2019 4 次提交
    • Y
      ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t · 91583411
      由 Yang Shi 提交于 
      [ Upstream commit 143c2a89e0e5fda6c6fd08d7bc1126438c19ae90 ]

When running kprobe on -rt kernel, the below bug is caught:

|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931
|in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0
|Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140
|CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1
|Hardware name: Freescale LS1021A
|[<8025a43c>] (___might_sleep)
|[<80b5b324>] (rt_spin_lock)
|[<80b5c31c>] (__patch_text_real)
|[<80b5c3ac>] (patch_text_stop_machine)
|[<802f2920>] (multi_cpu_stop)

Since patch_text_stop_machine() is called in stop_machine() which
disables IRQ, sleepable lock should be not used in this atomic context,
 so replace patch_lock to raw lock.
Signed-off-by: NYang Shi <yang.shi@linaro.org>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      91583411
    • A
      crypto: sha512/arm - fix crash bug in Thumb2 build · d7a90ee5
      由 Ard Biesheuvel 提交于 
      [ Upstream commit c64316502008064c158fa40cc250665e461b0f2a ]

The SHA512 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : [<bf820bca>]    lr : [<bf824ffd>]    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d7a90ee5
    • A
      crypto: sha256/arm - fix crash bug in Thumb2 build · 1f52fa12
      由 Ard Biesheuvel 提交于 
      [ Upstream commit 69216a545cf81b2b32d01948f7039315abaf75a0 ]

The SHA256 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : [<bf820bca>]    lr : [<bf824ffd>]    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      1f52fa12
    • B
      ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms · 360186d8
      由 Bartlomiej Zolnierkiewicz 提交于 
      [ Upstream commit 6862fdf2201ab67cd962dbf0643d37db909f4860 ]

"S3C2410 PM Suspend Memory CRC" feature (controlled by
SAMSUNG_PM_CHECK config option) is incompatible with highmem
(uses phys_to_virt() instead of proper mapping) which is used by
the majority of Exynos boards. The issue manifests itself in OOPS
on affected boards, i.e. on Odroid-U3 I got the following one:

Unable to handle kernel paging request at virtual address f0000000
pgd = 1c0f9bb4
[f0000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[<c0458034>] (crc32_le) from [<c0121f8c>] (s3c_pm_makecheck+0x34/0x54)
[<c0121f8c>] (s3c_pm_makecheck) from [<c0121efc>] (s3c_pm_run_res+0x74/0x8c)
[<c0121efc>] (s3c_pm_run_res) from [<c0121ecc>] (s3c_pm_run_res+0x44/0x8c)
[<c0121ecc>] (s3c_pm_run_res) from [<c01210b8>] (exynos_suspend_enter+0x64/0x148)
[<c01210b8>] (exynos_suspend_enter) from [<c018893c>] (suspend_devices_and_enter+0x9ec/0xe74)
[<c018893c>] (suspend_devices_and_enter) from [<c0189534>] (pm_suspend+0x770/0xc04)
[<c0189534>] (pm_suspend) from [<c0186ce8>] (state_store+0x6c/0xcc)
[<c0186ce8>] (state_store) from [<c09db434>] (kobj_attr_store+0x14/0x20)
[<c09db434>] (kobj_attr_store) from [<c02fa63c>] (sysfs_kf_write+0x4c/0x50)
[<c02fa63c>] (sysfs_kf_write) from [<c02f97a4>] (kernfs_fop_write+0xfc/0x1e4)
[<c02f97a4>] (kernfs_fop_write) from [<c027b198>] (__vfs_write+0x2c/0x140)
[<c027b198>] (__vfs_write) from [<c027b418>] (vfs_write+0xa4/0x160)
[<c027b418>] (vfs_write) from [<c027b5d8>] (ksys_write+0x40/0x8c)
[<c027b5d8>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Add PLAT_S3C24XX, ARCH_S3C64XX and ARCH_S5PV210 dependencies to
SAMSUNG_PM_CHECK config option to hide it on Exynos platforms.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      360186d8
  19. 17 4月, 2019 4 次提交
  21. 06 4月, 2019 6 次提交
    • R
      ARM: avoid Cortex-A9 livelock on tight dmb loops · 30d503ba
      由 Russell King 提交于 
      [ Upstream commit 5388a5b82199facacd3d7ac0d05aca6e8f902fed ]

machine_crash_nonpanic_core() does this:

	while (1)
		cpu_relax();

because the kernel has crashed, and we have no known safe way to deal
with the CPU.  So, we place the CPU into an infinite loop which we
expect it to never exit - at least not until the system as a whole is
reset by some method.

In the absence of erratum 754327, this code assembles to:

	b	.

In other words, an infinite loop.  When erratum 754327 is enabled,
this becomes:

1:	dmb
	b	1b

It has been observed that on some systems (eg, OMAP4) where, if a
crash is triggered, the system tries to kexec into the panic kernel,
but fails after taking the secondary CPU down - placing it into one
of these loops.  This causes the system to livelock, and the most
noticable effect is the system stops after issuing:

	Loading crashdump kernel...

to the system console.

The tested as working solution I came up with was to add wfe() to
these infinite loops thusly:

	while (1) {
		cpu_relax();
		wfe();
	}

which, without 754327 builds to:

1:	wfe
	b	1b

or with 754327 is enabled:

1:	dmb
	wfe
	b	1b

Adding "wfe" does two things depending on the environment we're running
under:
- where we're running on bare metal, and the processor implements
  "wfe", it stops us spinning endlessly in a loop where we're never
  going to do any useful work.
- if we're running in a VM, it allows the CPU to be given back to the
  hypervisor and rescheduled for other purposes (maybe a different VM)
  rather than wasting CPU cycles inside a crashed VM.

However, in light of erratum 794072, Will Deacon wanted to see 10 nops
as well - which is reasonable to cover the case where we have erratum
754327 enabled _and_ we have a processor that doesn't implement the
wfe hint.

So, we now end up with:

1:      wfe
        b       1b

when erratum 754327 is disabled, or:

1:      dmb
        nop
        nop
        nop
        nop
        nop
        nop
        nop
        nop
        nop
        nop
        wfe
        b       1b

when erratum 754327 is enabled.  We also get the dmb + 10 nop
sequence elsewhere in the kernel, in terminating loops.

This is reasonable - it means we get the workaround for erratum
794072 when erratum 754327 is enabled, but still relinquish the dead
processor - either by placing it in a lower power mode when wfe is
implemented as such or by returning it to the hypervisior, or in the
case where wfe is a no-op, we use the workaround specified in erratum
794072 to avoid the problem.

These as two entirely orthogonal problems - the 10 nops addresses
erratum 794072, and the wfe is an optimisation that makes the system
more efficient when crashed either in terms of power consumption or
by allowing the host/other VMs to make use of the CPU.

I don't see any reason not to use kexec() inside a VM - it has the
potential to provide automated recovery from a failure of the VMs
kernel with the opportunity for saving a crashdump of the failure.
A panic() with a reboot timeout won't do that, and reading the
libvirt documentation, setting on_reboot to "preserve" won't either
(the documentation states "The preserve action for an on_reboot event
is treated as a destroy".)  Surely it has to be a good thing to
avoiding having CPUs spinning inside a VM that is doing no useful
work.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      30d503ba
    • V
      ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of · d8945878
      由 Vladimir Murzin 提交于 
      [ Upstream commit 72cd4064fccaae15ab84d40d4be23667402df4ed ]

ARMv8M introduces support for Security extension to M class, among
other things it affects exception handling, especially, encoding of
EXC_RETURN.

The new bits have been added:

Bit [6]	Secure or Non-secure stack
Bit [5]	Default callee register stacking
Bit [0]	Exception Secure

which conflicts with hard-coded value of EXC_RETURN:

In fact, we only care of few bits:

Bit [3]	 Mode (0 - Handler, 1 - Thread)
Bit [2]	 Stack pointer selection (0 - Main, 1 - Process)

We can toggle only those bits and left other bits as they were on
exception entry.

It is basically, what patch does - saves EXC_RETURN when we do
transition form Thread to Handler mode (it is first svc), so later
saved value is used instead of EXC_RET_THREADMODE_PROCESSSTACK.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d8945878
    • M
      ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation · 240a9050
      由 Mathieu Malaterre 提交于 
      [ Upstream commit 3e3380d0675d5e20b0af067d60cb947a4348bf9b ]

Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +

For simplicity, two sed expressions were used to solve each warnings
separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: NDavid Daney <ddaney@caviumnetworks.com>
Suggested-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      240a9050
    • M
      ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins · d21a63fc
      由 Martin Blumenstingl 提交于 
      [ Upstream commit 29f0023d01f063feacfc404f0446905aee4f82ee ]

According to the Odroid-C1+ schematics the Ethernet TXD1 signal is
routed to GPIOH_5 and the TXD0 signal is routed to GPIOH_6.
The public S805 datasheet shows that TXD0 can be routed to DIF_2_P and
TXD1 can be routed to DIF_2_N instead.

The pin groups eth_txd0_0 (GPIOH_6) and eth_txd0_1 (DIF_2_P) are both
configured as Ethernet TXD0 and TXD1 data lines in meson8b.dtsi. At the
same time eth_txd1_0 (GPIOH_5) and eth_txd1_1 (DIF_2_N) are configured
as TXD0 and TXD1 data lines as well.
This results in a bad Ethernet receive performance. Presumably this is
due to the eth_txd0 and eth_txd1 signal being routed to the wrong pins.
As a result of that data can only be transmitted on eth_txd2 and
eth_txd3. However, I have no scope to fully confirm this assumption.

The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit  0: eth_rxd1 (DIF_0_P)
- register 6 bit  1: eth_rxd0 (DIF_0_N)
- register 6 bit  2: eth_rx_dv (DIF_1_P)
- register 6 bit  3: eth_rx_clk (DIF_1_N)
- register 6 bit  6: eth_tx_en (DIF_3_P)
- register 6 bit  8: eth_ref_clk (DIF_3_N)
- register 6 bit  9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)

Drop the eth_txd0_1 and eth_txd1_1 groups from eth_rgmii_pins to fix the
Ethernet transmit performance on Odroid-C1. Also add the eth_rxd2 and
eth_rxd3 groups so we don't rely on the bootloader to set them up.

iperf3 statistics before this change:
- transmitting from Odroid-C1: 741 Mbits/sec (0 retries)
- receiving on Odroid-C1: 199 Mbits/sec (1713 retries)

iperf3 statistics after this change:
- transmitting from Odroid-C1: 667 Mbits/sec (0 retries)
- receiving on Odroid-C1: 750 Mbits/sec (0 retries)

Fixes: b9644654 ("ARM: dts: meson8b: extend ethernet controller description")
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: NEmiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: NEmiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d21a63fc
    • N
      ARM: 8833/1: Ensure that NEON code always compiles with Clang · d93fe5e6
      由 Nathan Chancellor 提交于 
      [ Upstream commit de9c0d49d85dc563549972edc5589d195cd5e859 ]

While building arm32 allyesconfig, I ran into the following errors:

  arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
  '-mfloat-abi=softfp -mfpu=neon'

  In file included from lib/raid6/neon1.c:27:
  /home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
  error: "NEON support not enabled"

Building V=1 showed NEON_FLAGS getting passed along to Clang but
__ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
which is the '-march' value for allyesconfig.

>From lib/Basic/Targets/ARM.cpp in the Clang source:

  // This only gets set when Neon instructions are actually available, unlike
  // the VFP define, hence the soft float and arch check. This is subtly
  // different from gcc, we follow the intent which was that it should be set
  // when Neon instructions are actually available.
  if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
    Builder.defineMacro("__ARM_NEON", "1");
    Builder.defineMacro("__ARM_NEON__");
    // current AArch32 NEON implementations do not support double-precision
    // floating-point even when it is present in VFP.
    Builder.defineMacro("__ARM_NEON_FP",
                        "0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
  }

Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
definined by Clang. This doesn't functionally change anything because
that code will only run where NEON is supported, which is implicitly
armv7.

Link: https://github.com/ClangBuiltLinux/linux/issues/287Suggested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d93fe5e6
    • S
      ARM: 8840/1: use a raw_spinlock_t in unwind · d81bdb3c
      由 Sebastian Andrzej Siewior 提交于 
      [ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ]

Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.

I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then

->new_slab_objects()
 ->new_slab()
  ->setup_object()
   ->setup_object_debug()
    ->init_tracking()
     ->set_track()
      ->save_stack_trace()
       ->save_stack_trace_tsk()
        ->walk_stackframe()
         ->unwind_frame()
          ->unwind_find_idx()
           =>spin_lock_irqsave(&unwind_lock);
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d81bdb3c
  23. 03 4月, 2019 1 次提交
    • K
      ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time · 9397f0d9
      由 Kohji Okuno 提交于 
      commit 91740fc8242b4f260cfa4d4536d8551804777fae upstream.

In the current cpuidle implementation for i.MX6q, the CPU that sets
'WAIT_UNCLOCKED' and the CPU that returns to 'WAIT_CLOCKED' are always
the same. While the CPU that sets 'WAIT_UNCLOCKED' is in IDLE state of
"WAIT", if the other CPU wakes up and enters IDLE state of "WFI"
istead of "WAIT", this CPU can not wake up at expired time.
 Because, in the case of "WFI", the CPU must be waked up by the local
timer interrupt. But, while 'WAIT_UNCLOCKED' is set, the local timer
is stopped, when all CPUs execute "wfi" instruction. As a result, the
local timer interrupt is not fired.
 In this situation, this CPU will wake up by IRQ different from local
timer. (e.g. broacast timer)

So, this fix changes CPU to return to 'WAIT_CLOCKED'.
Signed-off-by: NKohji Okuno <okuno.kohji@jp.panasonic.com>
Fixes: e5f9dec8 ("ARM: imx6q: support WAIT mode using cpuidle")
Cc: <stable@vger.kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9397f0d9
  25. 24 3月, 2019 2 次提交