- 10 1月, 2006 40 次提交
-
-
由 Patrick McHardy 提交于
Set skb->priority = sk->sk_priority as in raw.c and IPv4. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
This patch fixes a warning from my IPsec patches: CC net/ipv4/ip_output.o net/ipv4/ip_output.c: In function 'ip_finish_output': net/ipv4/ip_output.c:208: warning: implicit declaration of function 'xfrm4_output_finish' Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The mapping between TC_ACTION_SHOT and the qdisc return codes is better suited to NET_XMIT_BYPASS so as not to confuse TCP Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
A new device to do intermidiate functional block in a system shared manner. To use the new functionality, you need to turn on qos/classifier actions. The new functionality can be grouped as: 1) qdiscs/policies that are per device as opposed to system wide. ifb allows for a device which can be redirected to thus providing an impression of sharing. 2) Allows for queueing incoming traffic for shaping instead of dropping. Packets are redirected to this device using tc/action mirred redirect construct. If they are sent to it by plain routing instead then they will merely be dropped and the stats would indicate that. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
With the previous missing-unlock fix the spinlock is dropped only after the tty->driver->write() call which might sleep. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kris Katterjohn 提交于
This changes some simple "if (x) BUG();" statements to "BUG_ON(x);" Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Clean up the net/sched directory a bit by prefix all actions with act_. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Also make sure the legacy code is only built when CONFIG_NET_CLS_ACT is not set. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
tcf_action_exec only gets a single skb pointer and doesn't own the skb, but passes double skb pointers (to a local variable) to the action functions. Change to use single skb pointers everywhere. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Many cipher implementations use 4-byte/8-byte loads/stores which require alignment on some architectures. This patch explicitly sets the alignment requirements for them. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
The cipher code path may allocate up to two blocks of data on the stack. Therefore we need to place limits on the maximum block size. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
After a partial update, the done pointer is off to the right by 64 bytes. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Daniel Marjamäki 提交于
It is assigned but never read. Signed-off-by: NDaniel Marjamki <daniel.marjamaki@comhem.se> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Denis Vlasenko 提交于
Reduce the number of comparisons by one through the use of jb/je. This patch also corrects the comments regarding the different key lengths. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
Since the temporary buffer is used as an argument to cia_decrypt, it must be aligned by cra_alignmask. This bug was found by linux@horizon.com. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Pitre 提交于
This patch avoids shifting the count left and right needlessly for each call to sha1_update(). It instead can be done only once at the end in sha1_final(). Keeping the previous test example (sha1_update() successively called with len=64), a 1.3% performance increase can be observed on i386, or 0.2% on ARM. The generated code is also smaller on ARM. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Pitre 提交于
This patch gives more descriptive names to the variables i and j. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Pitre 提交于
The current code unconditionally copy the first block for every call to sha1_update(). This can be avoided if there is no pending partial block. This is always the case on the first call to sha1_update() (if the length is >= 64 of course. Furthermore, temp does need to be called if sha_transform is never invoked. Also consolidate the sha_transform calls into one to reduce code size. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
As the Crypto API now allows multiple implementations to be registered for the same algorithm, we no longer have to play tricks with Kconfig to select the right AES implementation. This patch sets the driver name and priority for all the AES implementations and removes the Kconfig conditions on the C implementation for AES. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This is the first step on the road towards asynchronous support in the Crypto API. It adds support for having multiple crypto_alg objects for the same algorithm registered in the system. For example, each device driver would register a crypto_alg object for each algorithm that it supports. While at the same time the user may load software implementations of those same algorithms. Users of the Crypto API may then select a specific implementation by name, or choose any implementation for a given algorithm with the highest priority. The priority field is a 32-bit signed integer. In future it will be possible to modify it from user-space. This also provides a solution to the problem of selecting amongst various AES implementations, that is, aes vs. aes-i586 vs. aes-padlock. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
A lot of crypto code needs to read/write a 32-bit/64-bit words in a specific gender. Many of them open code them by reading/writing one byte at a time. This patch converts all the applicable usages over to use the standard byte order macros. This is based on a previous patch by Denis Vlasenko. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
Change the bit-field in struct cword to unsigned to shut sparse up. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Linus Torvalds 提交于
-
由 Alexey Dobriyan 提交于
Another reason to use: ret = foo(); if (ret < 0) goto out; Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
sg_page_malloc should clear the data buffer, not that extent of mem_map. This fixes Jesper's sg_page_free "Bad page states" Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
- Get_dvb_firmware script updated accordingly: - my $url = "http://www.linuxtv.org/~mkrufky/dvb-usb-bluebird-01.fw"; + my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-blue$Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Chris Pascoe 提交于
- Clean up a recently introduced spaces vs tabs whitespace problem. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- replace omitted 'TODO:' Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Patrick Boettcher 提交于
- Move the code that patches bluebird firmware before upload from the generic code into the cxusb driver itself. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Add VIDIOC_LOG_STATUS to the radio device ioctl list. - Reduce the confusion between modes and standards - Fix stereo reporting for radio. - Don't set i2c configuration if the chip doesn't support it. - Fix reporting of current standard for radio. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- Implemented v4l2 api for sliced vbi data output to pass WSS data from userspace to the av7110 Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Check capabilities for audio settings (volume, balance, bass, treble, loudness, mute) - added loudness support - added missing VIDEO_AUDIO_BALANCE flags for v4l1 compatibility - do not call msp_any_detect_stereo for non-autoselect chips to retrieve the current stereo setting: that will temporarily mute the sound. It is only needed when the stereo mode might be changed, and for autoselect msp processors that do not periodically need to update their stereo setting. - do not wake up the thread if the standard did not change. Prevents temporary audio drop-out if the standard is set to the same value. - fix confused stereo detect code where V4L2_TUNER_SUB_STEREO and V4L2_TUNER_MODE_STEREO values were used incorrectly. - stereo mode reporting was broken (v4l2 value used to index a string array expecting v4l1 mode values). - do not set dsp register 0x30 in the 3410d thread: that register does not exist for pre-'G' revision msp chips. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Marc Koschewski 提交于
- A new Kconfig option makes the user able to select if the dibusb-mb driver shall claim faulty programmed USB devices which are coming with default Cypress USB IDs. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Marc Koschewski 提交于
- Some whitespaces cleaned up - unused code removed Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Marc Koschewski 提交于
- Indention cleaned for tabsize=8 Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Patrick Boettcher 提交于
- Check if in the dvb-usb-device-structure the dvb_pll_desc is set before use. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Marc Koschewski 提交于
- Indention for values of several request defines were not TabSized=8. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-