Keep a reference count for uses of the parent information for an rbd
device.

An initial reference is set in rbd_img_request_create() if the
target image has a parent (with non-zero overlap).  Each image
request for an image with a non-zero parent overlap gets another
reference when it's created, and that reference is dropped when the
request is destroyed.

The initial reference is dropped when the image gets torn down.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define rbd_parent_request_create() and rbd_parent_request_destroy()
to handle the creation of parent image requests submitted for
layered image objects.  For simplicity, let rbd_img_request_put()
handle dropping the reference to any image request (parent or not),
and call whichever destructor is appropriate on the last put.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define rbd_dev_unparent() to encapsulate cleaning up parent data
structures from a layered rbd image.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Previously when a layered write was going to involve a copyup
request, the original osd request was released before submitting the
parent full-object read.  The osd request for the copyup would then
be allocated in rbd_img_obj_parent_read_full_callback().

Shortly we will be handling the event of mapped layered images
getting flattened, and when that occurs we need to resubmit the
original request.  We therefore don't want to release the osd
request until we really konw we're going to replace it--in the
callback function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Get parent info for format 2 images on every refresh (rather than
just during the initial probe).  This will be needed to detect the
disappearance of the parent image in the event a mapped image
becomes unlayered (i.e., flattened).  Avoid leaking the previous
parent spec on the second and subsequent times this information is
requested by dropping the previous one (if any) before updating it.
(Also, extract the pool id into a local variable before assigning
it into the parent spec.)

Switch to using a non-zero parent overlap value rather than the
existence of a parent (a non-null parent_spec pointer) to determine
whether to mark a request layered.  It will soon be possible for
a layered image to become unlayered while a request is in flight.

This means that the layered flag for an image request indicates that
there was a non-zero parent overlap at the time the image request
was created.  The parent overlap can change thereafter, which may
lead to special handling at request submission or completion time.

This and the next several patches are related to:
    http://tracker.ceph.com/issues/3763

NOTE:
If an error occurs while refreshing the parent info (i.e.,
requesting it after initial probe), the old parent info will
persist.  This is not really correct, and is a scenario that needs
to be addressed.  For now we'll assert that the failure mode is
unlikely, but the issue has been documented in tracker issue 5040.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An rbd clone image that has an overlap with its parent of 0 is
effectively not a layered image at all.  Detect this case and treat
such an image as non-layered.  Issue a warning to be sure the user
knows what's going on.

This resolves:
    http://tracker.ceph.com/issues/5028Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently, rbd_img_obj_parent_read_full() assumes the incoming
object request contains bio data.  But if a layered image is part of
a multi-layer stack of images it will result in read requests of
page data to parent images.

This is handling the same kind of issue as was resolved by this
commit:
    5b2ab72d  rbd: support reading parent page data

This resolves:
    http://tracker.ceph.com/issues/5027Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The code that reads object data from the parent for a copyup on
write request currently assumes that the size of that request is the
size of a "full" object from the original target image.

That is not necessarily the case.  The parent overlap could reduce
the request size below that.  To fix that assumption we need to
record the number of pages in the copyup_pages array, for both an
image request and an object request.  Rename a local variable in
rbd_img_obj_parent_read_full_callback() to reflect we're recording
the length of the parent read request, not the size of the target
object.

This resolves:
    http://tracker.ceph.com/issues/5038Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The rbd code has a need to be able to restart an osd request that
has already been started and completed once before.  This currently
wouldn't work right because the osd client code assumes an osd
request will be started exactly once  Certain fields in a request
are never cleared and this leads to trouble if you try to reuse it.

Specifically, the r_sent, r_got_reply, and r_completed fields are
never cleared.  The r_sent field records the osd incarnation at the
time the request was sent to that osd.  If that's non-zero, the
message won't get re-mapped to a target osd properly, and won't be
put on the unsafe requests list the first time it's sent as it
should.  The r_got_reply field is used in handle_reply() to ensure
the reply to a request is processed only once.  And the r_completed
field is used for lingering requests to avoid calling the callback
function every time the osd client re-sends the request on behalf of
its initiator.

Each osd request passes through ceph_osdc_start_request() when
responsibility for the request is handed over to the osd client for
completion.  We can safely zero these three fields there each time a
request gets started.

One last related change--clear the r_linger flag when a request
is no longer registered as a linger request.

This resolves:
    http://tracker.ceph.com/issues/5026Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Get rid of rbd_img_request_get(), because it isn't used, and maybe
won't ever be needed.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Any changes to parent images are immaterial to any mapped clone.
So there is no need to have a watch event registered on header
objects except for the header object of an image that is mapped.
In fact, a watch request is a write operation, and we may only
have read access to a parent image.

We can't set up the watch request until we know the name of the
header object though.  So pass a flag to rbd_dev_image_probe() to
indicate whether this probe is for a mapping or for a parent image.

Change the second parameter to rbd_dev_header_watch_sync() be
Boolean while we're at it.

This resolves:
    http://tracker.ceph.com/issues/4941Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The rbd_dev->mapping field for a parent image is not meaningful.
Since rbd_image_probe() is used both for images being mapped and
their parents, it doesn't make sense to set that flag in that
function.

So move the setting of the mapping.read_only flag out of
rbd_dev_image_probe() and into rbd_add() instead.

This resolves:
    http://tracker.ceph.com/issues/4940Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently, rbd_img_parent_read() assumes the incoming object request
contains bio data.  But if a layered image is part of a multi-layer
stack of images it will result in read requests of page data to parent
images.

Fortunately, it's not hard to add support for page data.

This resolves:
    http://tracker.ceph.com/issues/4939Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In rbd_img_obj_parent_read_full_callback() there is an assertion
intended to verify the size of the image request for a full parent
read was the size of the original request's target object.  But
assertion was looking at the parent image order rather than the
original one, and these values can differ.

Fix that.

This resolves:
    http://tracker.ceph.com/issues/4938Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This rearranges rbd_dev_v2_refresh() so it works more like
rbd_dev_v1_header_info().  While format 1 images need to read the
whole header object to get any information, format 2 can collect
almost all information selectively.  So the one-time initialization
will remain in a separate function--based on rbd_dev_v2_probe().

Rename rbd_dev_v2_refresh() to be rbd_dev_v2_header_info(), and have
it call rbd_dev_v2_header_onetime() if it's being called for the
first time for the given rbd device.

Rename rbd_dev_v2_probe() to be rbd_dev_v2_header_onetime() and
remove the image size and snapshot context calls it held in
common with the refresh function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Get rid of the trivial wrapper functions rbd_dev_v1_refresh() and
rbd_dev_v1_probe(), substituting rbd_dev_v1_header_read() calls
in their place.

Rename rbd_dev_v1_header_read() to be rbd_dev_v1_header_info(), to
be more generic (it will better reflect what happens with format 2
images).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An rbd_dev structure's fields are all zero-filled for an initial
probe, so there's no need to explicitly zero the parent_spec
and parent_overlap fields in rbd_dev_v1_probe().  Removing these
assignments makes rbd_dev_v1_probe() *almost* trivial.

Move the dout() message that announces discovery of an image into
rbd_dev_image_probe(), generalize to support images in either format
and only show it if an image is fully discovered.

This highlights that are some unnecessary cleanups in the error
path for rbd_dev_v1_probe(), so they can be removed.

Now rbd_dev_v1_probe() *is* a trivial wrapper function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Now that rbd_header_from_disk() only fills in one-time fields once,
we can extend it slightly so it releases the other fields before
replacing their values.  This way there's no need to pass a
temporary buffer and then copy all the results in.  Just use the rbd
device header structure in rbd_header_from_disk() so its values get
updated directly.

Note that this means we need to take the header semaphore at the
point we update things.  So pass the rbd_dev rather than the address
of its header as its first argument to rbd_header_from_disk(), and
have it return an error code.

As a result, rbd_dev_v1_header_read() does all the work,
rbd_read_header() becomes unnecessary, and rbd_dev_v1_refresh()
becomes a very simple wrapper.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This rearranges rbd_header_from_disk so that it:
    - allocates the snapshot context right away
    - keeps results in local variables, not changing the passed-in
      header until it's known we'll succeed
    - does initialization of set-once fields in a header only if
      they have not already been set

The last point is moot at the moment, because rbd_read_header()
(the only caller) always supplies a zero-filled header buffer.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The passed-in header structure is zeroed in rbd_header_from_disk().
Instead, have the caller do it.  Note that there are two callers,
rbd_dev_v1_refresh() and rbd_dev_v1_probe().  The latter already has
a zeroed header structure so zeroing it isn't necessary there.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Defer setting the size and features fields of a mapped image until
after the Linux disk structure is set up.  Set the capacity of the
disk after that.

Rearrange the definition of rbd_image_header, separating the fields
that are set only once from those that can be updated.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Hold off setting the read-only flag in rbd_add() for an image being
mapped until we have successfully probed the image.  At that point
we know whether it's a snapshot mapping or not, so we can set the
read-only flag in that one place rather than doing so (for
snapshots) in rbd_dev_mapping_set().  To do this, pass a flag to the
image probe routine indicating whether we want a read-only mapping.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This function is a duplicate of rbd_dev_mapping_clear(), and was
added by mistake.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently rbd_dev_mapping_set() looks up the snapshot id for the
snapshot whose name is found in the rbd device's spec structure.

That function gets called by rbd_dev_device_setup(), which is
called by rbd_add() *after* rbd_dev_image_probe().  If the
image probe succeeds, the rbd device's spec will already have
been updated to include names and ids for all fields.

Therefore there's no need to look up the snapshot id in
rbd_dev_mapping_set().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The presence of the LAYERING bit in an rbd image's feature mask does
not guarantee the image actually has a parent image.  Currently that
bit is set only when a clone (i.e., image with a parent) is created,
but it is (currently) not cleared if that clone gets flattened back
into a "normal" image.  A "parent_id" query will leave the
parent_spec for the image being mapped a null pointer, but will not
return an error.

Currently, whenever an image with the LAYERED feature gets mapped, a
warning about the use of layered images gets printed.  But we don't
want to do this for a flattened image, so print the warning only
if we find there is a parent spec after the probe.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Since rbd_update_mapping_size() is now a trivial wrapper, just open
code it in its two callers.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When a mapped image changes size, we change the capacity recorded
for the Linux disk associated with it, in rbd_update_mapping_size().
That function is called in two places--the format 1 and format 2
refresh routines.

There is no need to set the capacity while holding the header
semaphore.  Instead, do it in the common rbd_dev_refresh(), using
the logic that's already there to initiate disk revalidation.

Add handling in the request function, just in case a request
that exceeds the capacity of the device comes in (perhaps one
that was started before a refresh shrunk the device).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This commit:
    d98df63e rbd: revalidate_disk upon rbd resize
instituted a call to revalidate_disk() to notify interested parties
that a mapped image has changed size.  This works well, as long as
the the rbd device doesn't map a snapshot.

A snapshot will never change size.  However, the base image the
snapshot is associated with can, and it can do so while the snapshot
is mapped.

The problem is that the test for the size is looking at the size of
the base image, not the size of the mapped snapshot.  This patch
corrects that.

Update the warning message shown in the event of error, and move
it into the callers.

This resolves:
    http://tracker.ceph.com/issues/4911Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When rbd_dev_v2_refresh() is called, the rbd device already has a
snapshot context associated with it.  But that never gets freed,
the pointer just gets overwritten.

Fix this by dropping the rbd device's reference to the snapshot
context before overwriting the pointer.

Because ceph_put_snap_context() already handles for a null pointer
we don't need to check for that (for the probe case, where no
context has yet been assigned).

This resolves:
    http://tracker.ceph.com/issues/4912Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When a read for a layered image object finds the target object
doesn't exist, a read image request for the parent image is created
and submitted.  When that completes, the callback routine was
not releasing that parent image request.  Fix that.

The slab allocation stuff just added has greatly simplified the
search for the source of this memory leak.

This resolves:
    http://tracker.ceph.com/issues/4803Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage allocation of ceph_osdc_request
structures.

This resolves:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage ceph_msg_data structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage ceph_msg structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The names of objects used for image object requests are always fixed
size.  So create a slab cache to manage them.  Define a new function
rbd_segment_name_free() to match rbd_segment_name() (which is what
supplies the dynamically-allocated name buffer).

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage rbd_obj_request allocation.  We aren't
using a constructor, and we'll zero-fill object request structures
when they're allocated.

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The next patch will define a slab allocator for a object requests.
To use that we'll need to allocate the name of an object separate
from the request structure itself.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage rbd_img_request allocation.  Nothing
too fancy at this point--we'll still initialize everything at
allocation time (no constructor)

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use bsearch(3) to make snapshot lookup by id more efficient.  (There
could be thousands of snapshots, and conceivably many more.)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This functionality inadvertently disappeared in the last patch.

Image snapshots can get removed at just about any time.  In
particular it can disappear even if it is in use by an rbd
client as a mapped image.

The rbd client deals with such a disappearance by responding to new
requests with ENXIO.  This is implemented by each rbd device
maintaining an EXISTS flag, which is normally set but cleared if a
snapshot disappears.

This patch (re-)implements the clearing of that flag.

Whenever mapped image header information is refreshed, if the
mapping is for a snapshot, verify the mapped snapshot is still
present in the updated snapshot context.  If it is not, clear the
flag.

It is not necessary to check this in the initial probe, because the
probe will not succeed if the snapshot doesn't exist.

This resolves:
    http://tracker.ceph.com/issues/4880Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

We no longer use the snapshot list for anything.  When we need to
look up a snapshot name, id, size, or feature mask, we just do it
directly rather than relying on this list being updated with every
refresh.  The main reason it existed was for the benefit of the
device/sysfs entries that previously were associated with snapshots.

So get rid of the snapshot list, and struct rbd_snap, and the
hundreds of lines of code that supported them.

This resolves:
    http://tracker.ceph.com/issues/4868Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>