This patch adds to support inode checksum in f2fs.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix verification flow]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds to support plain project quota.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline
to indicate that on-disk structure of current inode is extended.

In order to extend, we changed the inode structure a bit:

Original one:

struct f2fs_inode {
	...
	struct f2fs_extent i_ext;
	__le32 i_addr[DEF_ADDRS_PER_INODE];
	__le32 i_nid[DEF_NIDS_PER_INODE];
}

Extended one:

struct f2fs_inode {
        ...
        struct f2fs_extent i_ext;
	union {
		struct {
			__le16 i_extra_isize;
			__le16 i_padding;
			__le32 i_extra_end[0];
		};
		__le32 i_addr[DEF_ADDRS_PER_INODE];
	};
        __le32 i_nid[DEF_NIDS_PER_INODE];
}

Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of
i_addr field for storing i_extra_isize and i_padding. with i_extra_isize,
we can calculate actual size of reserved space in i_addr, available
attribute fields included in total extra attribute fields for current
inode can be described as below:

  +--------------------+
  | .i_mode            |
  | ...                |
  | .i_ext             |
  +--------------------+
  | .i_extra_isize     |-----+
  | .i_padding         |     |
  | .i_prjid           |     |
  | .i_atime_extra     |     |
  | .i_ctime_extra     |     |
  | .i_mtime_extra     |<----+
  | .i_inode_cs        |<----- store blkaddr/inline from here
  | .i_xattr_cs        |
  | ...                |
  +--------------------+
  |                    |
  |    block address   |
  |                    |
  +--------------------+
  | .i_nid             |
  +--------------------+
  |   node_footer      |
  | (nid, ino, offset) |
  +--------------------+

Hence, with this patch, we would enhance scalability of f2fs inode for
storing more newly added attribute.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch tries to make below macros calculating max inline size,
inline dentry field size considerring reserving size-changeable
space:
- MAX_INLINE_DATA
- NR_INLINE_DENTRY
- INLINE_DENTRY_BITMAP_SIZE
- INLINE_RESERVED_SIZE

Then, when inline_{data,dentry} options is enabled, it allows us to
reserve inline space with different size flexibly for adding newly
introduced inode attribute.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds to support plain user/group quota.

Change Note by Jaegeuk Kim.

- Use f2fs page cache for quota files in order to consider garbage collection.
  so, quota files are not tolerable for sudden power-cuts, so user needs to do
  quotacheck.

- setattr() calls dquot_transfer which will transfer inode->i_blocks.
  We can't reclaim that during f2fs_evict_inode(). So, we need to count
  node blocks as well in order to match i_blocks with dquot's space.

  Note that, Chao wrote a patch to count inode->i_blocks without inode block.
  (f2fs: don't count inode block in in-memory inode.i_blocks)

- in f2fs_remount, we need to make RW in prior to dquot_resume.

- handle fault_injection case during f2fs_quota_off_umount

- TODO: Project quota
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, we count all inode consumed blocks including inode block,
xattr block, index block, data block into i_blocks, for other generic
filesystems, they won't count inode block into i_blocks, so for
userspace applications or quota system, they may detect incorrect block
count according to i_blocks value in inode.

This patch changes to count all blocks into inode.i_blocks excluding
inode block, for on-disk i_blocks, we keep counting inode block for
backward compatibility.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Both in memory or on disk, generic filesystems record i_blocks with
512bytes sized sector count, also VFS sub module such as disk quota
follows this rule, but f2fs records it with 4096bytes sized block
count, this difference leads to that once we use dquota's function
which inc/dec iblocks, it will make i_blocks of f2fs being inconsistent
between in memory and on disk.

In order to resolve this issue, this patch changes to make in-memory
i_blocks of f2fs recording sector count instead of block count,
meanwhile leaving on-disk i_blocks recording block count.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

For example,

f2fs_create
 - new_node_page is failed
 - handle_failed_inode
  - skip to add it into orphan list, since ni.blk_addr == NULL_ADDR
   : set_inode_flag(inode, FI_FREE_NID)

f2fs_evict_inode
 - EIO due to fault injection
 - f2fs_bug_on() is triggered

So, we don't need to call f2fs_bug_on in this case.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch fixes missing inode flag loaded from disk, reported by Tom.

[tom@localhost ~]$ sudo mount /dev/loop0 /mnt/
[tom@localhost ~]$ sudo chown tom:tom /mnt/
[tom@localhost ~]$ touch /mnt/testfile
[tom@localhost ~]$ sudo chattr +i /mnt/testfile
[tom@localhost ~]$ echo test > /mnt/testfile
bash: /mnt/testfile: Operation not permitted
[tom@localhost ~]$ rm /mnt/testfile
rm: cannot remove '/mnt/testfile': Operation not permitted
[tom@localhost ~]$ sudo umount /mnt/
[tom@localhost ~]$ sudo mount /dev/loop0 /mnt/
[tom@localhost ~]$ lsattr /mnt/testfile
----i-------------- /mnt/testfile
[tom@localhost ~]$ echo test > /mnt/testfile
[tom@localhost ~]$ rm /mnt/testfile
[tom@localhost ~]$ sudo umount /mnt/

Cc: stable@vger.kernel.org
Reported-by: NTom Yan <tom.ty89@outlook.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch also reverts d0db7703 ("f2fs: do SSR in higher priority").

This patch fixes out of free segments caused by many small file creation by
1) mkfs -s 1 2G
2) mount
3) untar
 - preoduce 60000 small files burstly
4) sync
 - flush node pages
 - flush imeta

Here, when we do f2fs_balance_fs, we missed # of imeta blocks, resulting in
skipping to check has_not_enough_free_secs.

Another test is done by
1) mkfs -s 12 2G
2) mount
3) untar
 - preoduce 60000 small files burstly
4) sync
 - flush node pages
 - flush imeta

In this case, this patch also fixes wrong block allocation under large section
size.
Reported-by: NWilliam Brana <wbrana@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch fixes the following scenario.

- f2fs_create/f2fs_mkdir             - write_checkpoint
 - f2fs_mark_inode_dirty_sync         - block_operations
                                       - f2fs_lock_all
                                       - f2fs_sync_inode_meta
                                        - f2fs_unlock_all
                                        - sync_inode_metadata
 - f2fs_lock_op
                                         - f2fs_write_inode
                                          - update_inode_page
                                           - get_node_page
                                             return -ENOENT
 - new_inode_page
  - fill_node_footer
 - f2fs_mark_inode_dirty_sync
 - ...
 - f2fs_unlock_op
                                          - f2fs_inode_synced
                                       - f2fs_lock_all
                                       - do_checkpoint

In this checkpoint, we can get an inode page which contains zeros having valid
node footer only.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The previous one was not a proper location to inject an error, since there
is no point to get errors. Instead, we can emulate EIO during truncation,
and the below logic should handle it correctly.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If f2fs_new_inode() is failed, the bad inode will invalidate 0'th node page
during f2fs_evict_inode(), which doesn't need to do.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously kernel message can show that in which function we do the
injection, but unfortunately, most of the caller are the same, for
tracking more information of injection path, it needs to show upper
caller's name. This patch supports that ability.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We should record updating status of inode only for living inode, for those
unlinked inode it needs to clear its ino cache, otherwise after the ino
was been reused, it will cause unneeded node page writing during ->fsync.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch tries to make more clean inodes when flushing dirty inodes in
checkpoint.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This is to avoid no free segment bug during checkpoint caused by a number of
dirty inodes.

The case was reported by Chao like this.
1. mount with lazytime option
2. fill 4k file until disk is full
3. sync filesystem
4. read all files in the image
5. umount

In this case, we actually don't need to flush dirty inode to inode page during
checkpoint.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need to keep incomplete created inode in cache, so if we fail to
add link into directory during new inode creation, it's better to set
nlink of inode to zero, then we can evict inode immediately. Otherwise
release of nid belong to inode will be delayed until inode cache is being
shrunk, it may cause a seemingly endless loop while allocating free nids
in time of testing generic/269 case of fstest suit.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: add update_inode_page to fix kernel panic]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In order to avoid racing problem, make largest extent cache being updated
under lock.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, we only support global fault injection configuration, so that
when we configure type/rate of fault injection through sysfs, mount
option, it will influence all f2fs partition which is being used.

It is not make sence, since it will be not convenient if developer want
to test separated partitions with different fault injection rate/type
simultaneously, also it's not possible to enable fault injection in one
partition and disable fault injection in other one.

>From now on, we move global configuration of fault injection in module
into per-superblock, hence injection testing can be more flexible.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch gives another chances during roll-forward recovery regarding to
-ENOMEM.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's check inode's dirtiness before calling mark_inode_dirty.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's store orphan inode pages right away.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

FI_DIRTY_INODE flag is not covered by inode page lock, so it can be unset
at any time like below.

Thread #1                        Thread #2
- lock_page(ipage)
- update i_fields
                                 - update i_size/i_blocks/and so on
				 - set FI_DIRTY_INODE
- reset FI_DIRTY_INODE
- set_page_dirty(ipage)

In this case, we can lose the latest i_field information.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need lock parameter, which is always true.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If roll-forward recovery can recover i_size, we don't need to update inode's
metadata during fsync.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch registers all the inodes which have dirty metadata to sync when
checkpoint is doing.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch calls mark_inode_dirty_sync() for the following on-disk inode
changes.

 -> largest
 -> ctime/mtime/atime
 -> i_current_depth
 -> i_xattr_nid
 -> i_pino
 -> i_advise
 -> i_flags
 -> i_mode
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch refactors to use inode pointer for set_inode_flag and
clear_inode_flag.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Given errors, this patch flushes pending bios as soon as possible.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Even if an inode failed to release its blocks, it should be kept in an orphan
inode list, so it will be released later.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch modifies to retry truncating node blocks in -ENOMEM case.
Signed-off-by: NHou Pengyang <houpengyang@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch fixes a couple of bugs regarding to orphan inodes when handling
errors.

This tries to
 - call alloc_nid_done with add_orphan_inode in handle_failed_inode
 - let truncate blocks in f2fs_evict_inode
 - not make a bad inode due to i_mode change
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds the renamed functions moved from the f2fs crypto files.

1. definitions for per-file encryption used by ext4 and f2fs.

2. crypto.c for encrypt/decrypt functions
 a. IO preparation:
  - fscrypt_get_ctx / fscrypt_release_ctx
 b. before IOs:
  - fscrypt_encrypt_page
  - fscrypt_decrypt_page
  - fscrypt_zeroout_range
 c. after IOs:
  - fscrypt_decrypt_bio_pages
  - fscrypt_pullback_bio_page
  - fscrypt_restore_control_page

3. policy.c supporting context management.
 a. For ioctls:
  - fscrypt_process_policy
  - fscrypt_get_policy
 b. For context permission
  - fscrypt_has_permitted_context
  - fscrypt_inherit_context

4. keyinfo.c to handle permissions
  - fscrypt_get_encryption_info
  - fscrypt_free_encryption_info

5. fname.c to support filename encryption
 a. general wrapper functions
  - fscrypt_fname_disk_to_usr
  - fscrypt_fname_usr_to_disk
  - fscrypt_setup_filename
  - fscrypt_free_filename

 b. specific filename handling functions
  - fscrypt_fname_alloc_buffer
  - fscrypt_fname_free_buffer

6. Makefile and Kconfig

Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
Signed-off-by: NIldar Muslukhov <ildarm@google.com>
Signed-off-by: NUday Savagaonkar <savagaon@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Split drop_inmem_pages from commit_inmem_pages for code readability,
and prepare for the following modification.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In write_begin, if storage supports stable_page, we don't need to wait for
writeback to update its contents.
This patch introduces to use wait_for_stable_page instead of
wait_on_page_writeback.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The sceanrio is:
1. create fully node blocks
2. flush node blocks
3. write inline_data for all the node blocks again
4. flush node blocks redundantly

So, this patch tries to flush inline_data when flushing node blocks.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds one parameter to clean up all the callers of f2fs_balance_fs.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Only when node page is newly dirtied, it needs to check whether we need to do
f2fs_gc.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>