Storing internal frames in macroblock tiled order improves memory
access patterns by allowing increased burst sizes when transferring
the uncompressed macroblocks to or from main memory.
The translation logic only supports a single chroma base address,
so this is only supported for the chroma interleaved NV12 format.

Since the rotator used to copy the decoder output into the v4l2
capture buffers does not seem to support the tiled format correctly,
only enable it in the encoder for now.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The frame cache should be set up correctly to encode NV12 source frames.
This was not done before, so move the cache setup out of start_decoding
into its own function and call it from both start_encoding and
start_decoding.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The encoder needs to know the nominal framerate for the constant bitrate
control mechanism to work. Currently the only way to set the framerate is
by using VIDIOC_S_PARM on the output queue.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The encoder allows to specify the VBV model reference decoder's initial
delay and buffer size. Export the corresponding V4L2 controls.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On i.MX6, sometimes after decoding a stream, encoding will produce macroblock
errors caused by missing 8-byte sequences in the output stream. Until the cause
for this is found, reset the hardware after sequence end, which seems to help.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Keep count of number of buffer meta structures in the list and use
a separate spinlock for operations on this counted list instead
of reusing the bitstream mutex in some places and none at all in
others.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The v4l2_m2m_num_src_bufs_ready() function is called in multiple places
in coda_cob_ready, and there already is a variable src_bufs that is
assigned to its result. Move it to the beginning and use it everywhere.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Trace events with exactly the same parameters and trace output, such as
coda_enc_pic_run and coda_enc_pic_done, are supposed to use the
DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated
TRACE_EVENT macro calls.
This patch changes the order of parameters to coda_dec_rot_done and adds
a timestamp so it can share an event class with coda_bit_queue.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since commit ba300204 ("[media] v4l2-ioctl: fill in the description
for VIDIOC_ENUM_FMT"), all pixel formats are assigned their description
in a central place. We can now drop the custom list.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Otherwise a restarted stream won't queue buffers.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Allow coda_seq_end_work to be called multiple times, move the setting
of ctx->initialized from coda_start/stop_streaming() into
coda_start_encoding/decoding and coda_seq_end_work, respectively,
and skip the SEQ_END command in coda_seq_end_work if the context is
already deinitialized before.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In stream end mode the hardware will read the bitstream to its end,
overshooting the write pointer. Do not write additional data into
the bitstream in this mode.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

All decoder instances using the BIT processor should preload buffers
into the bitstream ring buffer, including MPEG4 decoding. Fix this
by explicitly stating the above condition instead of listing all
relevant input formats.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The mvcol buffer is allocated at the end of the first internal buffer.
This patch fixes an out of bounds array access.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This is already done for one side of the comparison with the expectation
that the HW counter rolls over at the 16 bit boundary. This is true when
decoding a h.264 stream, but doesn't hold for at least MJPEG. As we don't
know the exact wrap-around point for this format just clamp the HW counter
to the same 16 bits. This should be enough to detect most of the errors
and saves us from doing different comparisons based on the decoded format.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vsp1_entity_is_streaming() function is called in atomic context when
queuing buffers, and sleeps due to a mutex. As the mutex just protects
access to one structure field, fix this by replace the mutex with a
spinlock.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The checks need to be performed on up to two planes, as the third plane,
if present, must have the same stride and size as the second plane.

The code incorrectly performs the checks on at least two planes instead
of at most two planes, fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We should set "ret" on this error path instead of returning success.

Fixes: df330515 ('[media] v4l: xilinx: Add Xilinx Video IP core')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NHyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The driver is tested on our hardware and all the implemented features
works as expected.

Missing features:
- CEC support
- HDCP repeater support
- IR support
Signed-off-by: NMats Randgaard <matrandg@cisco.com>
[hans.verkuil@cisco.com: updated copyright year to 2015]
[hans.verkuil@cisco.com: update confusing confctl_mutex comment]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

bdisp_dev->dbg.copy_node shall be a copy of (and not point to)
bdisp_ctx->node, since this resource is freed upon driver release.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add this missing debug information
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Support the composing (at VIDEO_CAPTURE) with the _selection API.
v4l2-compliance successfully run ("test Composing: OK")
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This commit implements frame decimation for stk1160, which allows
to support format changes instead of a static frame size.

The stk1160 supports independent row and column decimation, in two
different modes:
 * set a number of rows/columns units to skip for each unit sent.
 * set a number of rows/columns units to send for each unit skipped.

This effectively allows to achieve different frame scaling ratios.

The unit number can be set to either two row/columns sent/skipped,
or four row/columns sent/skipped. Since the video format (UYVY)
has 4-bytes, using a unit number of two row/columns results
in frame color 'shifting', so set to four row/columns sent/skipped.
Signed-off-by: NMichael Stegemann <michael@stegemann.it>
Signed-off-by: NDale Hamel <dale.hamel@srvthe.net>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

These messages are not really informational, and just makes the driver's
output too verbose. This commit changes some messages to a debug level,
removes a really useless "driver loaded" message and finally undefines
the DEBUG macro.
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Upon a S_FMT the input/requested frame size and pixel format is
overwritten by the current sub-device settings.
Fix this so application can actually set the frame size and format.

Fixes: 417d2e50 ("[media] media: platform: add VPFE capture driver support for AM437X")

Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency of VIDEO_ADV7604 and VIDEO_COBALT (the latter
selects the former) on GPIOLIB if COMPILE_TEST is enabled.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix small typo (missing 'it') in the documentation for
V4L2_CTRL_FLAG_EXECUTE_ON_WRITE.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The documentation had two media_version entries. The second one was a typo and
it should be driver_version instead. Correct this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the new v4l2_subdev_notify_event() helper function to deliver the
resolution change event to userspace via the v4l2 subdev event queue as
well as to the bridge driver using the callback notify mechanism.

This allows userspace applications to react to changes in resolution. This
is useful and often necessary for video pipelines where there is no direct
1-to-1 relationship between the subdevice converter and the video capture
device and hence it does not make sense to directly forward the event to
the video capture device node.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
[hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the new v4l2_subdev_notify_event() helper function to deliver the
resolution change event to userspace via the v4l2 subdev event queue as
well as to the bridge driver using the callback notify mechanism.

This allows userspace applications to react to changes in resolution. This
is useful and often necessary for video pipelines where there is no direct
1-to-1 relationship between the subdevice converter and the video capture
device and hence it does not make sense to directly forward the event to
the video capture device node.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
[hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a new helper function called v4l2_subdev_notify_event() which will
deliver the specified event to both the v4l2 subdev event queue as well as
to the notify callback. The former is typically used by userspace
applications to listen to notification events while the later is used by
bridge drivers. Combining both into the same function avoids boilerplate
code in subdev drivers.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Allow userspace applications to subscribe to control change events. This
can e.g. be used to monitor the 5V detect control to be notified when a
source is connected or disconnected.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Allow userspace applications to subscribe to control change events. This
can e.g. be used to monitor the 5V detect control to be notified when a
source is connected or disconnected.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If the vdev pointer == NULL, then just return.

This makes it easier for subdev drivers to use this function without having to
check if the sd->devnode pointer is NULL or not.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Linux 4.2-rc2

We need to backport changeset 31f02455, with fixes a bug at
include/linux/compiler.h that breaks sparse.

* tag 'v4.2-rc2': (221 commits)
  Linux 4.2-rc2
  Revert "drm/i915: Use crtc_state->active in primary check_plane func"
  freeing unlinked file indefinitely delayed
  fix a braino in ovl_d_select_inode()
  9p: don't leave a half-initialized inode sitting around
  tick/broadcast: Prevent NULL pointer dereference
  selinux: fix mprotect PROT_EXEC regression caused by mm change
  parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results
  stifb: Implement hardware accelerated copyarea
  nfit: add support for NVDIMM "latch" flag
  nfit: update block I/O path to use PMEM API
  tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test
  tools/testing/nvdimm: fix return code for unimplemented commands
  tools/testing/nvdimm: mock ioremap_wt
  pmem: add maintainer for include/linux/pmem.h
  Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors"
  arm64: entry32: remove pointless register assignment
  MIPS: O32: Use compat_sys_getsockopt.
  MIPS: c-r4k: Extend way_string array
  MIPS: Pistachio: Support CDMM & Fast Debug Channel
  ...

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This reverts commit dec4f799.

Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:

        crtc_state = state->base.state ?
                intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;

So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.

There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull VFS fixes from Al Viro:
 "Fixes for this cycle regression in overlayfs and a couple of
  long-standing (== all the way back to 2.6.12, at least) bugs"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  freeing unlinked file indefinitely delayed
  fix a braino in ovl_d_select_inode()
  9p: don't leave a half-initialized inode sitting around

Pull MIPS fixes from Ralf Baechle:
 "A fair number of 4.2 fixes also because Markos opened the flood gates.

   - Patch up the math used calculate the location for the page bitmap.

   - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ
     around was causing issues on non-Malta platforms, so move the code
     to a Malta specific location.

   - A spelling fix replicated through several files.

   - Fix to the emulation of an R2 instruction for R6 cores.

   - Fix the JR emulation for R6.

   - Further patching of mindless 64 bit issues.

   - Ensure the kernel won't crash on CPUs with L2 caches with >= 8
     ways.

   - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels.

   - Fix cache flushing for multithreaded cores.

   - A build fix"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: O32: Use compat_sys_getsockopt.
  MIPS: c-r4k: Extend way_string array
  MIPS: Pistachio: Support CDMM & Fast Debug Channel
  MIPS: Malta: Make GIC FDC IRQ workaround Malta specific
  MIPS: c-r4k: Fix cache flushing for MT cores
  Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit"
  MIPS: cps-vec: Use macros for various arithmetics and memory operations
  MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0
  MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit
  MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2
  MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA
  MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting
  MIPS: Fix erroneous JR emulation for MIPS R6
  MIPS: Fix branch emulation for BLTC and BGEC instructions
  MIPS: kernel: traps: Fix broken indentation
  MIPS: bootmem: Don't use memory holes for page bitmap
  MIPS: O32: Do not handle require 32 bytes from the stack to be readable.
  MIPS, CPUFREQ: Fix spelling of Institute.
  MIPS: Lemote 2F: Fix build caused by recent mass rename.