Switch on the device type before revision since anything we do here will
be device as well as revision specific.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This allows boards to leave the irq_base field unitialized and
prevents them having to reserve irqs in the platform.
pdata can be optional for irq support now. Without pdata the
driver allocates some free irq range. With pdata and irq_base > 0
the driver allocates exactly the specified irq.
Without pdata the irq defaults to IRQF_TRIGGER_LOW.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

In preparation for some additional work on the wm831x AUXADC code move the
support into a separate file. This is a simple code motion patch, there
should be no functional changes.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Ensure that there's no possibility of loosing an AUXADC interrupt by reading
the conversion result in the IRQ handler when using interrupts. Otherwise
it's possible that under very heavy load a new conversion could be initiated
before the acknowledgement for a previous interrupt has happened.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Use irq_allocate_desc() to get the IRQ range, which turns into a noop on
non-sparse systems. Since all existing users are non-sparse there should
be no compatibility issues.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only
be enabled via OTP or InstantConfig, not runtime software) the RTC can't
function.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Allow platform data to flag the touchscreen as disabled so that if the
touch driver is built in we don't end up causing lots of work by spuriously
detecting touchscreen activity on systems where it isn't in use.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Systems using this functionality will be uncommon.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The WM831x IRQ set_type() operation is doing a direct register write when
called but since set_type() is called with the bus lock held this isn't
legal and could cause deadlocks in the IRQ core.

Fix this by posting the updates into an array and syncing in the
bus_sync_unlock() callback.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

* 'nfs-for-3.1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  pnfsblock: write_pagelist handle zero invalid extents
  pnfsblock: note written INVAL areas for layoutcommit
  pnfsblock: bl_write_pagelist
  pnfsblock: bl_read_pagelist
  pnfsblock: cleanup_layoutcommit
  pnfsblock: encode_layoutcommit
  pnfsblock: merge rw extents
  pnfsblock: add extent manipulation functions
  pnfsblock: bl_find_get_extent
  pnfsblock: xdr decode pnfs_block_layout4
  pnfsblock: call and parse getdevicelist
  pnfsblock: merge extents
  pnfsblock: lseg alloc and free
  pnfsblock: remove device operations
  pnfsblock: add device operations
  pnfsblock: basic extent code
  pnfsblock: use pageio_ops api
  pnfsblock: add blocklayout Kconfig option, Makefile, and stubs
  pnfs: cleanup_layoutcommit
  pnfs: ask for layout_blksize and save it in nfs_server
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: use NUMA_NO_NODE
  slab: remove one NR_CPUS dependency

* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback:
  don't busy retry the inode on failed grab_super_passive()

* git://git.infradead.org/battery-2.6:
  gpio-charger: Fix checking return value of request_any_context_irq
  power_supply: MAX17042: Support additional properties
  max8903_charger: Allow platform data to be __initdata
  power_supply: Add charger driver for MAX8998/LP3974
  power_supply: Add charger driver for MAX8997/8966
  max17042_battery: Remove obsolete cleanup for clientdata
  twl4030_charger: Fix warnings
  wm831x_power: Support multiple instances
  wm831x_backup: Support multiple instances
  apm_power: Fix style error in macros
  s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()
  bq20z75: Enable detection after registering
  bq20z75: Add support for external notification

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower: Do detect IDA (opportunistic processor performance) via cpuid
  cpupower: Show Intel turbo ratio support via ./cpupower frequency-info
  cpupowerutils: increase MAX_LINE_LEN
  cpupower: Rename package from cpupowerutils to cpupower
  cpupowerutils: Rename: libcpufreq->libcpupower
  cpupowerutils: use kernel version-derived version string
  cpupowerutils: utils - ConfigStyle bugfixes
  cpupowerutils: helpers - ConfigStyle bugfixes
  cpupowerutils: idle_monitor - ConfigStyle bugfixes
  cpupowerutils: lib - ConfigStyle bugfixes
  cpupowerutils: bench - ConfigStyle bugfixes
  cpupowerutils: do not update po files on each and every compile
  cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism
  cpupowerutils: use COPYING, CREDITS from top-level directory
  cpupowerutils - cpufrequtils extended with quite some features

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  smc91c92_cs.c: fix bogus compiler warning
  orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002
  hostap_cs: support cards with "Version 01.02" as third product ID
  pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3
  pxa2xx pcmcia - stargate 2 use gpio array.
  pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.
  drivers:pcmcia:soc_common: make socket_init and socket_suspend optional

For invalid extents, find other pages in the same fsblock and write them out.

[pnfsblock: write_begin]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and  leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.

When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.

[pnfsblock: bl_write_pagelist support functions]
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: NZhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>

[SQUASHME: pnfsblock: mds_offset is set in the generic layer]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>

[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fixup blksize alignment in bl_setup_layoutcommit]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: NZhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and  leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.

When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.

[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[pnfsblock: read path error handling]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: NZhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new read_pagelist api]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
   extents list, for reads.

In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:

1. On setup_layoutcommit, the range is adjusted as before
   and a structure is allocated for communication with
   bl_encode_layoutcommit && bl_cleanup_layoutcommit
   (Generic layer provides a void-star to hang it on)

2. bl_encode_layoutcommit is called to do the actual
   encoding directly into xdr. The commit-extent-list is not
   freed and is stored on above structure.
   FIXME: The code is not yet converted to the new XDR cleanup

3. On cleanup the commit-extent-list is put back by a call
   to set_to_rw() as before, but with no need for XDR decoding
   of the list as before. And the commit-extent-list is freed.
   Finally allocated structure is freed.

[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
[pnfsblock: introduce bl_committing list]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: cleanup_layoutcommit wants a status parameter]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
   extents list, for reads.

In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:

1. On setup_layoutcommit, the range is adjusted as before
   and a structure is allocated for communication with
   bl_encode_layoutcommit && bl_cleanup_layoutcommit
   (Generic layer provides a void-star to hang it on)

2. bl_encode_layoutcommit is called to do the actual
   encoding directly into xdr. The commit-extent-list is not
   freed and is stored on above structure.
   FIXME: The code is not yet converted to the new XDR cleanup

3. On cleanup the commit-extent-list is put back by a call
   to set_to_rw() as before, but with no need for XDR decoding
   of the list as before. And the commit-extent-list is freed.
   Finally allocated structure is freed.

[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: prevent commit list corruption]
[pnfsblock: fix layoutcommit with an empty opaque]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Adds working implementations of various support functions
to handle INVAL extents, needed by writes, such as
bl_mark_sectors_init and bl_is_sector_init.

[pnfsblock: fix 64-bit compiler warnings for extent manipulation]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[Implement release_inval_marks]
Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Implement bl_find_get_extent(), one of the core extent manipulation
routines.

[pnfsblock: Lookup list entry of layouts and tags in reverse order]
Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>

pnfsblock: fix print format warnings for sector_t and size_t

gcc spews warnings about these on x86_64, e.g.:
fs/nfs/blocklayout/blocklayout.c:74: warning: format ‘%Lu’ expects type ‘long long unsigned int’, but argument 2 has type ‘sector_t’
fs/nfs/blocklayout/blocklayout.c:388: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

XDR decodes the block layout payload sent in LAYOUTGET result, storing
the result in an extent list.

[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix bug getting pnfs_layout_type in translate_devid().]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO
for each device returned.

[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
[pnfsblock: fix pnfs_deviceid references]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix print format warnings for sector_t and size_t]
[pnfs-block: #include <linux/vmalloc.h>]
[pnfsblock: no PNFS_NFS_SERVER]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[pnfsblock: fix bug determining size of striped volume]
[pnfsblock: fix oops when using multiple devices]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: get rid of vmap and deviceid->area structure]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace a stub, so that extents underlying the layouts are properly
added, merged, or ignored as necessary.
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: delete the new node before put it]
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix bug getting pnfs_layout_type in translate_devid().]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NZhang Jingwang <Jingwang.Zhang@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[upcall bugfixes]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[upcall bugfixes]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Adds structures and basic create/delete code for extents.
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NZhang Jingwang <Jingwang.Zhang@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

[pnfsblock: use pnfs_generic_pg_init_read/write]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Define a configuration variable to enable/disable compilation of the
block driver code.

Add the minimal structure for a pnfs block layout driver, and empty
list-heads that will hold the extent data

[pnfsblock: make NFS_V4_1 select PNFS_BLOCK]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[pnfs-block: fix CONFIG_PNFS_BLOCK dependencies]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfs: move pnfs_layout_type inline in nfs_inode]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: layout alloc and free]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfs: move pnfs_layout_type inline in nfs_inode]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: define module alias]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: NAndy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Block layout needs it to determine IO size.
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NTao Guo <glorioustao@gmail.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.

[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The block driver uses GETDEVICELIST
Signed-off-by: NAndy Adamson <andros@netapp.com>
[pass struct nfs_server * to getdevicelist]
[get machince creds for getdevicelist]
[fix getdevicelist decode sizing]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Using NFS4_MAX_UINT64 will break current protocol.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There can be multiple lseg per file, so layoutcommit should be
able to handle it.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>