Now each hists has its own hpp lists in hierarchy.  So instead of having
a pointer to a single perf_hpp_fmt in a hist entry, make it point the
hpp_list for its level.  This will be used to support multiple sort keys
in a single hierarchy level.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-3-git-send-email-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The perf_hpp__setup_hists_formats() is to build hists-specific output
formats (and sort keys).  Currently it's only used in order to build the
output format in a hierarchy with same sort keys, but it could be used
with different sort keys in non-hierarchy mode later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-2-git-send-email-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The dynamic entries are right-aligned unlike other entries since it
usually has numeric value.  But for the hierarchy mode, left alignment
is more appropriate IMHO.  Also trim spaces on the left so that we can
easily identify the hierarchy.

Before:

  $ perf report --hierarchy -i perf.data.kmem -s gfp_flags,ptr,bytes_req --stdio -g none
  ...
  #
  #       Overhead                                        gfp_flags /                ptr /          bytes_req
  # ..............  .................................................................................................
  #
      91.67%                   GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
         37.50%        0xffff8803f7669400
            37.50%                       448
          8.33%        0xffff8803f766be00
             8.33%                        96
          4.17%        0xffff8800d156dc00
             4.17%                       704

After:

  #       Overhead  gfp_flags / ptr / bytes_req
  # ..............  ....................................
  #
      91.67%        GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
         37.50%        0xffff8803f7669400
            37.50%        448
          8.33%        0xffff8803f766be00
             8.33%        96
          4.17%        0xffff8800d156dc00
             4.17%        704
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When dynamic entries are used in the hierarchy mode with multiple
events, the output might not be aligned properly.  In the hierarchy
mode, the each sort column is indented using total number of sort keys.
So it keeps track of number of sort keys when adding them.  However
a dynamic sort key can be added more than once when multiple events have
same field names.  This results in unnecessarily long indentation in the
output.

For example perf kmem records following events:

  $ perf evlist --trace-fields -i perf.data.kmem
  kmem:kmalloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
  kmem:kmalloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
  kmem:kfree: trace_fields: call_site,ptr
  kmem:kmem_cache_alloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
  kmem:kmem_cache_alloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
  kmem:kmem_cache_free: trace_fields: call_site,ptr
  kmem:mm_page_alloc: trace_fields: page,order,gfp_flags,migratetype
  kmem:mm_page_free: trace_fields: page,order

As you can see, many field names shared between kmem events.  So adding
'ptr' dynamic sort key alone will set nr_sort_keys to 6.  And this adds
many unnecessary spaces between columns.

Before:

  $ perf report -i perf.data.kmem --hierarchy -s ptr -g none --stdio
  ...
  #                Overhead                 ptr
  # .......................  ...................................
  #
      99.89%                 0xffff8803ffb79720
       0.06%                 0xffff8803d228a000
       0.03%                 0xffff8803f7678f00
       0.00%                 0xffff880401dc5280
       0.00%                 0xffff880406172380
       0.00%                 0xffff8803ffac3a00
       0.00%                 0xffff8803ffac1600

After:

  # Overhead                 ptr
  # ........  ....................
  #
      99.89%  0xffff8803ffb79720
       0.06%  0xffff8803d228a000
       0.03%  0xffff8803f7678f00
       0.00%  0xffff880401dc5280
       0.00%  0xffff880406172380
       0.00%  0xffff8803ffac3a00
       0.00%  0xffff8803ffac1600
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Like the stdio, it should show messages about omitted hierarchy
entries.  Please refer the previous commit for more details.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Like the stdio, it should show messages about omitted hierarchy entries.
Please refer the previous commit for more details.

As it needs to check an entry is omitted or not multiple times, add the
has_no_entry field in the hist entry.
Suggested-and-Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The previous patch introduced __rb_hierarchy_next() function with
various move direction like HMD_FORCE_CHILD but missed to change using
it some place.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When the hierarchy mode is used, some entries might be omiited due to a
percent limit or filter.  In this case the output hierarchy is different
than other entries.  Add an informative message to users about this.

For example, when 4% of percent limit is applied:

Before:
  #       Overhead  Command / Shared Object / Symbol
  # ..............  ..........................................
  #
      49.09%        swapper
         48.67%        [kernel.vmlinux]
            34.42%        [k] intel_idle
      11.51%        firefox
          8.87%        libpthread-2.22.so
             6.60%        [.] __GI___libc_recvmsg
      10.49%        gnome-shell
          4.74%        libc-2.22.so
      10.08%        Xorg
          6.11%        libc-2.22.so
             5.27%        [.] __memcpy_sse2_unaligned
       6.15%        perf

Note that, gnome-shell/libc has no symbols and perf has no dso/symbols.
With that patch the output will look like below:

After:

  #       Overhead  Command / Shared Object / Symbol
  # ..............  ..........................................
  #
      49.09%        swapper
         48.67%        [kernel.vmlinux]
            34.42%        [k] intel_idle
      11.51%        firefox
          8.87%        libpthread-2.22.so
             6.60%        [.] __GI___libc_recvmsg
      10.49%        gnome-shell
          4.74%        libc-2.22.so
                          no entry >= 4.00%
      10.08%        Xorg
          6.11%        libc-2.22.so
             5.27%        [.] __memcpy_sse2_unaligned
       6.15%        perf
                       no entry >= 4.00%
Suggested-and-Tested-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The hists__overhead_width() is to calculate width occupied by the
overhead (and others) columns before the sort columns.

The hist_entry__has_hiearchy_children() is to check whether an entry has
lower entries (children) in the hierarchy to be shown in the output.
This means the children should not be filtered out and above the percent
limit.

These two functions will be used to show information when all children
of an entry is omitted by the percent limit (or filter).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-16-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Like in stdio, fit column header to hierarchy output.  Merge column
headers with "/" as a separator.

   Overhead        Command / Shared Object / Symbol
  ...
  +   0.09%        dwm
  +   0.06%        emacs
  -   0.05%        perf
     -   0.05%        [kernel.vmlinux]
        +   0.03%        [k] memcpy_orig
        +   0.01%        [k] unmap_single_vma
        +   0.01%        [k] smp_call_function_single
        +   0.00%        [k] native_irq_return_iret
        +   0.00%        [k] arch_trigger_all_cpu_backtrace_handler
        +   0.00%        [k] native_write_msr_safe
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-15-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Implement hierarchy mode in TUI.  The output is look like stdio but it
also supports to fold/unfold children dynamically.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-14-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'C' and 'E' keys are to collapse/expand all hist entries.  Update
nr_hierarchy_entries properly in this case.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-13-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add nr_hierarchy_entries field to keep current number of (unfolded) hist
entries.  And the hist_entry->nr_rows carries number of direct children.
But in the hierarchy mode, entry can have grand children and callchains.
So update the number properly using hierarchy_count_rows() when toggling
the folded state (by pressing ENTER key).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-12-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The hierarchy output mode is to group entries so the existing columns
won't fit to the new output.  Treat all sort keys as a single column and
separate headers by "/".

  #    Overhead  Command / Shared Object
  # ...........  ................................
  #
      15.11%     swapper
         14.97%     [kernel.vmlinux]
          0.09%     [libahci]
          0.05%     [iwlwifi]
  ...
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-11-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily.  It also helps to find
out which component is most costly.  The output will look like below:

      15.11%     swapper
         14.97%     [kernel.vmlinux]
          0.09%     [libahci]
          0.05%     [iwlwifi]
      10.29%     irq/33-iwlwifi
          6.45%     [kernel.vmlinux]
          1.41%     [mac80211]
          1.15%     [iwldvm]
          1.14%     [iwlwifi]
          0.14%     [cfg80211]
       4.81%     firefox
          3.92%     libxul.so
          0.34%     [kernel.vmlinux]
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-10-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It'll be used for hierarchy output mode to indent entries properly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-9-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.

This caused following assertion failure..

  $ perf record -e sched:sched_switch -a sleep 1

  $ perf report -s comm,next_pid --stdio
  perf: ui/hist.c:651: perf_hpp__reset_width:
    Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.

This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.

This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.

Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.

In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add 'L' key action to change the percent limit applied to both of hist
entries and callchains.
Suggested-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding struct perf_hpp_list argument to following helper functions:

  void perf_hpp__setup_output_field(struct perf_hpp_list *list);
  void perf_hpp__reset_output_field(struct perf_hpp_list *list);
  void perf_hpp__append_sort_keys(struct perf_hpp_list *list);

so they could be used on hists's hpp_list.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-24-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_hpp_list__for_each_sort_list_safe macro
to iterate perf_hpp_list object's sort entries safely.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-23-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_hpp_list__for_each_sort_list macro to iterate
perf_hpp_list object's sort entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-22-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_hpp_list__for_each_format_safe macro to iterate
perf_hpp_list object's output entries safely.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-21-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_hpp_list__for_each_format macro to iterate
perf_hpp_list object's output entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-20-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding 2 perf_hpp_list register helpers:

  perf_hpp_list__column_register()
  perf_hpp_list__register_sort_field()

to be called within existing helpers:

  perf_hpp__column_register()
  perf_hpp__register_sort_field()

to register format entries within global perf_hpp_list object.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-17-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Gather output and sort lists under struct perf_hpp_list, so we could
have multiple instancies of sort/output format entries.

Replacing current perf_hpp__list and perf_hpp__sort_list lists with
single perf_hpp_list instance.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-15-git-send-email-jolsa@kernel.org
[ Renamed fields to .{fields,sorts} as suggested by Namhyung and acked by Jiri ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With multiple list holding format entries, we need the support properly
releasing format output/sort fields.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently we use static output fields, because we have single global
list of all sort/output fields.

We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:

  perf_hpp__setup_output_field
  perf_hpp__append_sort_keys
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding 'hpp__equal' callback function to compare hpp output format
entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To easily compare format entries and make it available for all kinds of
format entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently there's no way of comparing hpp format entries, which is
needed in following patches.

Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When all callchains of a hist entry is percent-limited, do not add a
blank line at the end.  It makes the entry look like it doesn't have
callchains.
Reported-and-Tested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornetSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report --no-children --percent-limit 0.01 --tui
  ...
  -    0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
           - vm_mmap_pgoff
              + 0.02% sys_mmap_pgoff
              + 0.02% vm_mmap
           + 0.02% mprotect_fixup

Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.

Before:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - mmap_region
          do_mmap_pgoff
          vm_mmap_pgoff

After:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
             vm_mmap_pgoff
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pass parent node's total period to callchain print functions.  This info
is needed by later patch to determine whether it can omit percent or not
correctly.

No functional change intended.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 8c430a34 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.

To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a34 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>