- 19 3月, 2013 14 次提交
-
-
由 Chen Gang 提交于
need using ccflags-y instead of EXTRA_CFLAGS can reference scripts/checkpatch.pl (1755..1766) when make EXTRA_CFLAGS=-W, the compiling issue will be occured. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
Add maintainer entry for the files composing si4713 FM transmitter driver. Signed-off-by: NEduardo Valentin <edubezval@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Syam Sidhardhan 提交于
kfree on NULL pointer is a no-op. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Syam Sidhardhan 提交于
kfree on NULL pointer is a no-op. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Syam Sidhardhan 提交于
kfree on NULL pointer is a no-op. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Syam Sidhardhan 提交于
kfree on NULL pointer is a no-op. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitry Torokhov 提交于
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Similarly probe() methods should not be marked __init unless platform_driver_probe() is used. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NTimo Kokkonen <timo.t.kokkonen@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
I did what I liked to do. Also corrected two long log writings as checkpatch.pl was complaining about those. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
WARNING: at lib/dma-debug.c:947 check_for_stack+0xa7/0xf0() ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack Reported-by: Npoma <pomidorabelisima@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Implement: dvb_usbv2_generic_rw_locked() dvb_usbv2_generic_write_locked() Caller must hold device lock when locked versions are called. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Syam Sidhardhan 提交于
This patch fixes the print_buf leaking. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Syam Sidhardhan 提交于
Check for (adap == NULL) has to done before accessing adap. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 3月, 2013 7 次提交
-
-
由 Ismael Luceno 提交于
Signed-off-by: NIsmael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Thiago Farina 提交于
Signed-off-by: NThiago Farina <tfarina@chromium.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
Terratec Cinergy S2 USB HD Rev.2 support. This commit is a corrected cherry-pick of 03228792 which got reverted in b7e38636 because it was rebased incorrectly and introduced compilation errors. Signed-off-by: NStephan Hilb <stephan@ecshi.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Alexey Khoroshilov 提交于
goto err and goto err_gateoff before mutex_lock(&state->internal->demod_lock) lead to unlock of unheld mutex in stv090x_sleep(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sachin Kamat 提交于
Fixes the below warning: drivers/media/platform/timblogiw.c:81:31: warning: symbol 'timblogiw_tvnorms' was not declared. Should it be static? Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Fabrizio Gazzato 提交于
This patch adds USB ID for alternative "Terratec Cinergy T Stick". Tested by a friend: works similarly to 0ccd:0093 version (af9035+tua9001) Signed-off-by: NFabrizio Gazzato <fabrizio.gazzato@gmail.com> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Gianluca Gennari 提交于
This patch: http://git.linuxtv.org/media_tree.git/commit/b86d15440b683f8634c0cb26fc0861a5bc4913ac is missing a chunk when compared to an older version: https://patchwork.kernel.org/patch/2063281/ probably because of an unresolved merging conflict. This causes the following error: WARNING: "cx231xx_g_chip_ident" [/home/jena/media_build/v4l/cx231xx.ko] undefined! Signed-off-by: NGianluca Gennari <gennarone@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 3月, 2013 19 次提交
-
-
由 Frank Schaefer 提交于
Like init_bttv_i2c(), fini_bttv_i2c() belongs to bttv-i2c.c. Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
Request module ir-kbd-i2c if an i2c ir decoder is detected. Tested with device "Hauppauge WinTV Theatre" (model 37284 rev B421). Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Fabrizio Gazzato 提交于
Add USB ID for MaxMedia HU394-T USB DVB-T Multi (FM, DAB, DAB+) dongle (RTL2832U+FC0012) In Italy, is branded as "DIKOM USB-DVBT HD" lsusb: ID 1b80:d394 Afatech Signed-off-by: NFabrizio Gazzato <fabrizio.gazzato@gmail.com> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The planar YUV422P is quite unusual and few if any applications support it. Instead choose the common YUYV format as the default. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
All fields after 'type' are already zeroed by the core framework. Clearing the full struct also clears 'type', which causes a wrong type value to be returned. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Just set the field value based on the chosen format. It's either INTERLACED or TOP. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Set priv field of struct v4l2_pix_format to 0 and fill in colorspace. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Instead of comparing against STD_NTSC and STD_PAL compare against 60 and 50 Hz formats. That's what you really want. When the standard is changed, make sure the width and height of the format are also updated to reflect the current standard. Also replace the deprecated current_norm by the g_std ioctl. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The use of the V4L2_CID_JPEG_COMPRESSION_QUALITY control is recommended over the G/S_JPEGCOMP ioctls. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Setting the frequency would unmute the card. Fixed the mute handling in the s_frequency code. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The device_caps and capabilities fields were swapped. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Theodore Kilgore 提交于
Instead use v4l2_dbg and v4l2_err. Note that the PDEBUG macro is kept to make this patch-set less invasive, but it is simply a wrapper around v4l2_dbg now. Most of the other changes are there to make the dev parameter for the v4l2_xxx macros available everywhere we do logging. Signed-off-by: NTheodore Kilgore <kilgota@auburn.edu> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Now that sonixj.c has been converted to the control framework it is no longer used. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-