- 23 9月, 2006 10 次提交
-
-
由 Tobin Davis 提交于
This patch adds missing device ids for Intel 915 and D102GGC motherboards. Signed-off-by: NTobin Davis <tobinx.b.davis@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added missing TLV callbacks for HD-audio codec supports. Also cleaned up the tlv callback for ad1986a (no mutex is needed there). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added a new model 'uniwill-m31' for Uniwill laptops with ALC861 codec chip. The patch is taken from ALSA bug#2035, and modifeid. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Danny Tholen 提交于
This patch adds support in ALSA snd-hda-intel driver for Asus W6A motherboard as reported in MDV Bugzilla #19962 (see http://qa.mandriva.com/show_bug.cgi?id=19962) Signed-off-by: NDanny Tholen <danny@mailmij.org> Signed-off-by: NThomas Backlund <tmb@mandriva.org> Signed-off-by: NThierry Vignaud <tvignaud@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the preselected model for a HP machine with SSID 103c:3010 to use hp-3013 (ALSA bug#2157). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
- Fix the wrong initialization of num_dacs when changing the channel mode between 2 and multi-channel modes. It must be evaluated after calling snd_hda_ch_mode_put() - Added the similar check of num_dacs fix in Realtek code. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
- Added model=arima for Arima W820Di1 with ALC882 codec chip - Added EAPD-control verbs to TCL S700 init verbs - Added missing model strings for Realtek codecs (to be specified via module option explicitly for testing/debugging) Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the support of Benq laptop with ALC262 codec. A model string 'benq' is added, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added 'hp-bpc' model type for HP xw4400-compatible laptops. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the proper model entry for Clevo m665n laptop with ALC880 codec. Also, added a model string 'clevo' to enable the clevo-type model option. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 29 6月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Patch from Realtek: - Fix ALC883 support code - Add support of ALC888 codec - Add ALC660 support (ALC861-compatible) - Add HP xw4400/6400/8400/9400 support (model=hp-bpc) - Code clean-up: fix spaces and indentation Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 6月, 2006 6 次提交
-
-
由 Takashi Iwai 提交于
Changed the assigned model for HP dc7600 with ALC260 codec to match better with the actual I/O assignment. Patch taken from ALSA bug#2157. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use the basic init verbs for ALC260 instead of hp init verbs since hp init verbs seem incomplete and not working on some machines. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the handling of capture controls on ALC882 3/6-stack models. Now the driver checks the availability of NID 07h. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing support for Sony Vaio VGN-S3HP with ALC260 codec. The patch taken from ALSA bug#2101. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the model entry for LG S1 laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kenneth Crudup 提交于
Added the model entry for Sony Vaio VGN-A790 laptop with ALC260 codec. From: Kenneth Crudup <kenny@panix.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 4月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Added the SSID entry for Epox EP-5LDA+ GLi with ALC880 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2006 2 次提交
-
-
由 Jonathan Woithe 提交于
The following patch relative to CVS from 20060324 adds the following features to the Realtek HDA codec. 1) Define two new pin modes: ALC_PIN_DIR_IN_NOMICBIAS and ALC_PIN_DIR_INOUT_NOMICBIAS. These can be used with jack mode switch definitions in mixers to prevent the user being offered the mic bias options if the hardware doesn't support it. 2) Add the ability to have different input mux definitions for different ADCs. This is needed because the ALC260 chip uses different mux layouts for the two onboard ADCs. A new field (num_mux_defs) was added to the alc_spec and alc_config_preset structures to support this. 3) Adjust numerous comments to make them consistent with the above changes. 4) Utilise the new multi-mux definition functionality for the ALC260 fujitsu model to allow recording of the mixer output. 5) Utilise the new multi-mux definition functionality for the ALC260 test model to make the mux selections a little less confusing. 6) Allow the headphone jack of the ALC260 acer model to be retasked in the mixer. 6) Utilise the new multi-mux definition functionality for the ALC260 acer model to give access to the mixer output and the retasked headphone jack. At this stage the *_NOMICBIAS modes are not used. We have reports that the "Line" jack of at least some Acer models doesn't pass the bias out, and we also know that NIDs 0x0f and 0x10 don't seem to accept the mic bias requests at all. However, I feel we need to collect more evidence on both counts before committing to the use of *_NOMICBIAS. In the case of the Acers, it's not clear whether this issue (probably caused by the inclusion of DC blocking capacitors) affects all Acer models or just a small number. With the issue with NIDs 0x0f and 0x10 it's unclear whether this is a hardware bug which will be addressed in later chip revisions or if it's an intentional restriction. The datasheet makes no mention of the restriction so at this stage I'm inclined to consider it a hardware bug. Comments in the source reflect this reasoning. On a similar theme, the headphone jack of the Fujitsu S7020 also doesn't appear to pass mic bias voltage. I'm still investigating this however. With the ability to retask the headphone jack, owners of ALC260-based Acer laptops should now be able to record 4 channels of audio if they desire. The multiple mux definitions allow this jack to be presented from both ADCs (since this mux input is one of those which differs between the muxes). This patch has been tested on a Fujitsu S7020 laptop and appears to behave itself both for the "test" and "fujitsu" models. Definitions using only a single mux specification also work. Other ALC chips should be fine but I cannot test these myself. The "auto" modes should also continue to function but again I have not verified this. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add support of LG LW20 laptop with ALC880 codec (ALSA bug#1572). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2006 17 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Added the support ASUS P4GPL-X with ALC880 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver - Fix autoconfig speaker/hp detection Now it allows multiple speaker pins (e.g. Dell laptops have such config) - Use speaker or hp pins if no line-outs are available This fixes the silence output on recent Dell laptops with STAC9200 (ALSA bug#1843) - Fix analog/realtek/sigmatel autoconfig parser Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Add model entry for FIC P4M-915GD1 with ALC880 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Add a model entry for Aopen i915GMm-HFS mobo with ALC880 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Added the default entry of ALC880 configuration table for CTL Travel Master U553W. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,HDA Codec driver Added a new model 'lg' for LG laptop (m1 express dual) with ALC880 codec. Also clean up the initialization/unsol_event hooks in patch_realtek.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver Add 'fujitsu' model for ALC262 patch to support a FSC laptop. The internal speaker is turned on/off with jack sensing. Also fixed alc262 'basic' model. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch adds mixer controls to the 'test' ALC260 model which allow the user to selectively enable or disable the SPDIF output pins. This should assist people identify digital outputs on machines which bring them to the outside world. Note that while the patch *should* work, I cannot personally verify it since my laptop doesn't bring the SPDIF lines out. As for the GPIO switches added in patch 4, these controls are currently only compiled in if debug mode is selected. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch is janitorial - it cleans up a number of cosmetic issues with the 'fujitsu' and 'test' models. Issues addressed: * spaces instead of tabs used for some indents, * clarified/corrected selected comments. Unlike a patch from earlier this week, this keeps both ADCs connected to the mic1 pin widget by default. I believe this is the better default, since some laptops don't bring the line1 widget to the outside world. Most (if not all) do bring mic1 out though, so it seems to me that this default should remain in place. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch adds a new 'acer' model. It is based on work by Rimas and many other dedicated Acer owners over the past few weeks (see bug number 1618) - kudos to them. This adds support for a variety of Acer laptops, although we are still in the process of collecting pci/subsystem IDs to add. There are still some potentially outstanding issues: there are reports that the CD control might not yet be functional for example. However, the time is probably right to get a 'first cut' into the kernel which can be refined as more test reports come in. From the reports by various Acer owners, this code allows them to record from internal mics and external jacks. Playback also seems to work to all external jacks and the internal speaker. The 'beep' control doesn't appear functional at the moment. This patch depends on the changes made in patch 3/7. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch adds 'test' model mixer switches for the GPIO controls found on the ALC260. It has been found that some laptops (eg: Acer) can use these to enable particular controls, so it would be useful to have access to these via the 'test' model. It will make testing new models easy, especially if certain outputs cannot be made to work any other way. This patch *should* work, but because the GPIO pins don't do anything in my laptop I cannot personally verify that all this works as expected. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch generalises a structure added for the 'fujitsu' model but which is potentially useful for other models as well. It turns the 'alc260_fujitsu_adc_nids' array into 'alc260_dual_adc_nids'; for other models which decide to utilise the dual ADC functionality there's really no reason why they need to define their own list of ADC nids. The 'fujitsu' model preset is adjusted accordingly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch adds functionality which switches the input/output buffer enables of retasking pins when the user changes their mode with the mode control. This probably reduces noise *slightly* for recording compared to the case where both input and output buffers were enabled simultaneously. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver This patch fixes input mux labels used for the ALC260 'test' model. This is needed to avoid confusion which comes about because the two ADCs in the ALC260 have slightly different mappings for their input selectors. Since this is just the test model it's sufficient to simply report both options where they exist. If a model comes along for which this becomes an issue, the ALC260 input mux code will have to be extended to allow different mux layouts for different ADCs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver The following patch adds a 'test' ALC260 model specification to the patch_realtek.c driver if CONFIG_SND_DEBUG is set. This is similar to the 'test' ALC880 model in that it sets up mixer controls for almost everything to make it easier for people to test their laptop/soundcard when working out what pin widgets are connected to which real-world devices. This patch assumes my previous patch (adding the second PCM to the ALC260) has previously been applied since it uses infrastructure added by that patch. In developing this patch it was found that not all retasking pins accept all the modes - in particular, some ignore the VREFxx variants. The pin mode control has therefore been tweaked to prevent this becoming a problem in mixer applications. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Jonathan Woithe <jwoithe@physics.adelaide.edu.au> The following patch changes the initverbs associated with the output sum widgets 0x08, 0x09 and 0x0a used with the fujitsu model in patch_realtek.c. It is against alsa 1.0.11rc3. Currently these widgets have their output muted, but a close reading of the datasheet suggests that they don't actually have an output mute. They have an *input* mute for each of their two inputs and a single output gain. This patch therefore activates the input mutes and zeros the output gain. It has not yet been tested but the above interpretation of the ALC260 datasheet seems correct. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver The following patch against alsa 1.0.11rc3 creates a PCM device (pcm1c) for the second ADC present on the ALC260 codec used by the hda driver. It also defines a new mixer control allowing the mode of retasking pins to be set; this means a user can (for example) designate the headphone jack to be a second input. With this patch in place it is possible to do 4 channel recording on laptops equipped with an ALC260 codec assuming both a stereo line-in jack is provided in addition to a headphone jack. Mixer controls are provided to allow the headphone jack to be switched as an input. In addition, an (input only) mode control is configured for the line-in jack to allow a bias voltage to be requested (VREF80 or VREF50) so headsets based on condensor microphones have a chance of working. This patch has been tested on a Fujitsu S7020 laptop and as such these features are currently only configured for the 'fujitsu' model. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2006 3 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fixed typos in alc882 model table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Arnaud Patard 提交于
Modules: HDA Codec driver This little patch add the model for the motherboard K8N51 from Gigabyte to the known models of ALC boards. Signed-off-by: NArnaud Patard <apatard@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
Modules: HDA Codec driver Fixed the wrong widget id for line-2 selector in the init verb of ALC260. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-