- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 12月, 2012 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Commit f0ed2ce8 ("[media] uvcvideo: Set error_idx properly for extended controls API failures") causes user space to behave incorrectly on one of my test machines (there is no sound under KDE 4.9.4 using pulseaudio and there is a knotify4 process occupying one of the CPU cores 100% of the time). Reverting that commit entirely fixes the problem for me. However, commit f0ed2ce8 appears to do more than it follows from its changelog, because the changelog only says about the changes related to ctrls->error_idx, while the commit additionally changes error codes returned by various functions in uvc_ctrl.c and uvc_v4l2.c. It turns out that the changes of the returned error codes confuse the user spce, so it is sufficient to revert the part of commit f0ed2ce8 not mentioned in its changelog to fix the problem. [ 'ENOENT' is not a valid error return from an ioctl to begin with, and I don't understand how anybody ever even thought it would be. - Linus ] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 12月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
The cpu_is_omap macros are now local to arch/arm/mach-omap2 in soc.h and plat/cpu.h can finally be dropped for omap2+. Thanks everybody for help with fixing the drivers. Note that we can now also remove the unused plat/cpu.h from smartreflex.c and isp.c as they will cause compile errors with ARCH_MULTIPLATFORM enabled. Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: NJean Pihet <jean.pihet@newoldbits.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 07 12月, 2012 1 次提交
-
-
由 Tomi Valkeinen 提交于
omapdss_compat_init() and omapdss_compat_uninit() is called internally by omapdss. This patch moves the calls to omapfb, omap_vout and omapdrm drivers. omapdrm driver can later remove the call after non-compat support has been implemented in omapdrm. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 03 12月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Fix typos in printk within various drivers. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 12月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 30 11月, 2012 2 次提交
-
-
由 Tomi Valkeinen 提交于
Remove including plat/dma.h which is not needed. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomi Valkeinen 提交于
cpu_is_* class functions create a dependency to OMAP platform code. omapdss driver, which omap_vout uses, exposes a function to get the version of the DSS hardware. To remove the dependency to OMAP platform code this patch changes omap_vout to use the omapdss version. For most of the checks, the ones dealing with DSS differences, this is actually more correct than using cpu_is_* functions. For the check whether VRFB is available or not this is not really correct, but still works fine. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 28 11月, 2012 21 次提交
-
-
由 Laurent Pinchart 提交于
Drivers must not rely on cpu_is_omap* macros (they will soon become private). Use the ISP revision instead to identify the hardware. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Clock enable (disable) is split in two operations, prepare and enable (disable and unprepare). Perform both when enabling/disabling the ISP clocks. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Support both grayscale (Y8) and Bayer (SBGGR8, SGBRG8, SGRBG8 and SRGGB8) formats. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Use the dev_* message logging API instead of raw printk. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
No longer assume pad number 0 is the source pad of the external entity. Find the source pad from the external entity and use it instead. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Configure CSI-2 phy based on platform data in the ISP driver. For that, the new V4L2_CID_IMAGE_SOURCE_PIXEL_RATE control is used. Previously the same was configured from the board code. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Add PHY routing configuration for both 3430 and 3630. Also add register bit definitions of CSIRXFE and CAMERA_PHY_CTRL registers on OMAP 3430 and 3630, respectively. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Add the registers used to configure the CSI-2 receiver PHY on OMAP3430 and 3630 and map them in the ISP driver. The register is part of the control block but it only is needed by the ISP driver. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The OMAP3ISP_*_REG_OFFSET, OMAP3ISP_*_REG_BASE and OMAP3ISP_*_REG macros are not needed. Remove them. The only exception is the OMAP3ISP_HIST_REG_BASE address. Replace it with the memory address received through platform resources. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
V4L2 buffers use the monotonic clock, while statistics buffers use wall time. This makes it difficult to correlate video frames and statistics. Switch statistics buffers to the monotonic clock to fix this. Reported-by: NAntoine Reversat <a.reversat@gmail.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
V4L2 integer controls are stored in signed 32-bit values. However, UVC controls can be either signed or unsigned. Take the UVC control signedness into account when clamping the control value to the min-max range. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The MEDIA_ENT_FL_DEFAULT identifies entities that are considered as default for their group and type. For video nodes, it identifies the node that application should use by default. UVC devices don't report which output terminal should be considered as the default, use the first one. Most devices have a single output terminal anyway. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The proper error code is -ENOTTY instead of -EINVAL. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Set the capabilities field to global capabilities, and the device_caps field to the video node capabilities. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Return the default format in that case. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The proper return code according to the V4L2 specification is -EACCES, not -EINVAL. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
When one of the requested controls doesn't exist the error_idx field must reflect that situation. For G_EXT_CTRLS and S_EXT_CTRLS, error_idx must be set to the control count. For TRY_EXT_CTRLS, it must be set to the index of the unexisting control. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Juergen Lock 提交于
This just adds the usbid to the rtl28xxu driver, that's all that's needed to make the stick work for DVB. Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
It was a bad idea, as comment also says, to write some "don't care" registers as 0xff value. Fix it. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This patch adds V4L2 driver for Samsung S3C24XX/S3C64XX SoC series camera interface. The driver exposes a subdev device node for CAMIF pixel resolution and crop control and two video capture nodes - for the "codec" and "preview" data paths. It has been tested on Mini2440 (s3c2440) and Mini6410 (s3c6410) board with gstreamer and mplayer. Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Signed-off-by: NAndrey Gusakov <dron0gus@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 11月, 2012 9 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The right solution is to remove the architecture dependency on dma_common_get_sgtable(). Revert this patch to apply the right one. This reverts commit 93049b93.
-
由 Arun Kumar K 提交于
When one input buffer has multiple frames, it should be fed again to the hardware with the remaining bytes. Removed the check for P frame in this scenario as this condition can come with all frame types. Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Signed-off-by: NARUN MANKUZHI <arun.m@samsung.com> Acked-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Arun Kumar K 提交于
Modified the function s5p_mfc_get_dec_y_adr_v6 to access the decode Y address register instead of display Y address. Signed-off-by: NSunil Mazhavanchery <sunilm@samsung.com> Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Acked-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
vfl_dir should be set to VFL_DIR_M2M so valid ioctls for this mem-to-mem device can be properly determined in the v4l2 core. Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Shaik Ameer Basha 提交于
Macros used to set input and output RGB type aren't correct. Updating the macros as per register manual. Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. This patch is required for stable kernels v3.5+. Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this caused driver resources not to be released. Not releasing the buffer queue also prevented other drivers to free memory, e.g. in MMAP -> USERPTR scenario. This patch is required for stable kernels v3.6+. Reported-by: NKamil Debski <k.debski@samsung.com> Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Make sure when fimc and fimc-lite capture video node is registered it has valid pipeline_ops assigned to it. Otherwise when a video node is opened right after is was registered there, might be an attempt to use ops that are just being assigned, after function v4l2_device_register_subdev() returns. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 11月, 2012 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
As reported by Stephen: > After merging the v4l-dvb tree, today's linux-next build (x86_64 > allmodconfig) failed like this: > > ERROR: "dma_common_get_sgtable" [drivers/media/v4l2-core/videobuf2-dma-contig.ko] undefined! > > Caused by commit 9ef2cbeb ("[media] v4l: vb2-dma-contig: add support > for DMABUF exporting"). dma_common_get_sgtable() is called from the > inline dma_get_sgtable_attrs() and dma_get_sgtable_attrs() is "called > from" dma_get_sgtable(). dma_common_get_sgtable() is only defined if > ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY is set which depends on > CONFIG_HAVE_GENERIC_DMA_COHERENT being set which it isn't for this build. The simplest fix is to just not support DMABUF with vb2-contig, on archs where this symbol doesn't exist. Some latter patch can rewrite it to support this outside -arm. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomasz Stanislawski 提交于
This patch enhances s5p-mfc with support for DMABUF exporting via VIDIOC_EXPBUF ioctl. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-