Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

 >  =============================================
 >  [ INFO: possible recursive locking detected ]
 >  2.6.31-2-generic #14~rbd3
 >  ---------------------------------------------
 >  firefox-3.5/4162 is trying to acquire lock:
 >   (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >
 >  but task is already holding lock:
 >   (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >
 >  other info that might help us debug this:
 >  3 locks held by firefox-3.5/4162:
 >   #0:  (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >   #1:  (&sb->s_type->i_mutex_key#11/1){+.+.+.}, at: [<ffffffff81139d5a>] lock_rename+0x6a/0xf0
 >   #2:  (&sb->s_type->i_mutex_key#11/2){+.+.+.}, at: [<ffffffff81139d6f>] lock_rename+0x7f/0xf0
 >
 >  stack backtrace:
 >  Pid: 4162, comm: firefox-3.5 Tainted: G         C 2.6.31-2-generic #14~rbd3
 >  Call Trace:
 >   [<ffffffff8108ae74>] print_deadlock_bug+0xf4/0x100
 >   [<ffffffff8108ce26>] validate_chain+0x4c6/0x750
 >   [<ffffffff8108d2e7>] __lock_acquire+0x237/0x430
 >   [<ffffffff8108d585>] lock_acquire+0xa5/0x150
 >   [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
 >   [<ffffffff815526ad>] __mutex_lock_common+0x4d/0x3d0
 >   [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
 >   [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
 >   [<ffffffff8120eaf9>] ? ecryptfs_rename+0x99/0x170
 >   [<ffffffff81552b36>] mutex_lock_nested+0x46/0x60
 >   [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >   [<ffffffff8120eb2a>] ecryptfs_rename+0xca/0x170
 >   [<ffffffff81139a9e>] vfs_rename_dir+0x13e/0x160
 >   [<ffffffff8113ac7e>] vfs_rename+0xee/0x290
 >   [<ffffffff8113c212>] ? __lookup_hash+0x102/0x160
 >   [<ffffffff8113d512>] sys_renameat+0x252/0x280
 >   [<ffffffff81133eb4>] ? cp_new_stat+0xe4/0x100
 >   [<ffffffff8101316a>] ? sysret_check+0x2e/0x69
 >   [<ffffffff8108c34d>] ? trace_hardirqs_on_caller+0x14d/0x190
 >   [<ffffffff8113d55b>] sys_rename+0x1b/0x20
 >   [<ffffffff81013132>] system_call_fastpath+0x16/0x1b

The trace above is totally reproducible by doing a cross-directory
rename on an ecryptfs directory.

The issue seems to be that sys_renameat() does lock_rename() then calls
into the filesystem; if the filesystem is ecryptfs, then
ecryptfs_rename() again does lock_rename() on the lower filesystem, and
lockdep can't tell that the two s_vfs_rename_mutexes are different.  It
seems an annotation like the following is sufficient to fix this (it
does get rid of the lockdep trace in my simple tests); however I would
like to make sure I'm not misunderstanding the locking, hence the CC
list...
Signed-off-by: NRoland Dreier <rdreier@cisco.com>
Cc: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.

The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The entries in xattr handler table should be immutable (ie const)
like other operation tables.

Later patches convert common filesystems. Uncoverted filesystems
will still work, but will generate a compiler warning.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently the way we do freezing is by passing sb>s_bdev to freeze_bdev and then
letting it do all the work.  But freezing is more of an fs thing, and doesn't
really have much to do with the bdev at all, all the work gets done with the
super.  In btrfs we do not populate s_bdev, since we can have multiple bdev's
for one fs and setting s_bdev makes removing devices from a pool kind of tricky.
This means that freezing a btrfs filesystem fails, which causes us to corrupt
with things like tux-on-ice which use the fsfreeze mechanism.  So instead of
populating sb->s_bdev with a random bdev in our pool, I've broken the actual fs
freezing stuff into freeze_super and thaw_super.  These just take the
super_block that we're freezing and does the appropriate work.  It's basically
just copy and pasted from freeze_bdev.  I've then converted freeze_bdev over to
use the new super helpers.  I've tested this with ext4 and btrfs and verified
everything continues to work the same as before.

The only new gotcha is multiple calls to the fsfreeze ioctl will return EBUSY if
the fs is already frozen.  I thought this was a better solution than adding a
freeze counter to the super_block, but if everybody hates this idea I'm open to
suggestions.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and switch the simple "loop over superblocks and do something"
loops to it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

At the same time we can kill s_need_restart and local mutex in there.
__put_super() made public for a while; will be gone later.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

use atomic_inc_not_zero(&sb->s_active) instead of playing games with
checking ->s_count > S_BIAS
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It will be used in suspend code and serves as an easy wrap around
copy_from_user. Similar to simple_read_from_buffer, it takes care
of transfers with proper lengths depending on available and count
parameters and advances ppos appropriately.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This cleans up a few of the complaints of __generic_block_fiemap.  I've
fixed all the typing stuff, used inline functions instead of macros,
gotten rid of a couple of variables, and made sure the size and block
requests are all block aligned.  It also fixes a problem where sometimes
FIEMAP_EXTENT_LAST wasn't being set properly.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kill_fasync() uses a central rwlock, candidate for RCU conversion, to
avoid cache line ping pongs on SMP.

fasync_remove_entry() and fasync_add_entry() can disable IRQS on a short
section instead during whole list scan.

Use a spinlock per fasync_struct to synchronize kill_fasync_rcu() and
fasync_{remove|add}_entry(). This spinlock is IRQ safe, so sock_fasync()
doesnt need its own implementation and can use fasync_helper(), to
reduce code size and complexity.

We can remove __kill_fasync() direct use in net/socket.c, and rename it
to kill_fasync_rcu().
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Requested by hch, for consistency now it is exported.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 148f948b (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) broke
the raw driver.

We now call through generic_file_aio_write -> generic_write_sync ->
vfs_fsync_range.  vfs_fsync_range has:

        if (!fop || !fop->fsync) {
                ret = -EINVAL;
                goto out;
        }

But drivers/char/raw.c doesn't set an fsync method.

We have two options: fix it or remove the raw driver completely.  I'm
happy to do either, the fact this has been broken for so long suggests it
is rarely used.

The patch below adds an fsync method to the raw driver.  My knowledge of
the block layer is pretty sketchy so this could do with a once over.

If we instead decide to remove the raw driver, this patch might still be
useful as a backport to 2.6.33 and 2.6.32.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Tested-by: NJeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It was tolerable until Eric went and added 8388608.

Cc: Eric Paris <eparis@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes inefficient page-by-page reads on POSIX_FADV_RANDOM.

POSIX_FADV_RANDOM used to set ra_pages=0, which leads to poor performance:
a 16K read will be carried out in 4 _sync_ 1-page reads.

In other places, ra_pages==0 means
- it's ramfs/tmpfs/hugetlbfs/sysfs/configfs
- some IO error happened
where multi-page read IO won't help or should be avoided.

POSIX_FADV_RANDOM actually want a different semantics: to disable the
*heuristic* readahead algorithm, and to use a dumb one which faithfully
submit read IO for whatever application requests.

So introduce a flag FMODE_RANDOM for POSIX_FADV_RANDOM.

Note that the random hint is not likely to help random reads performance
noticeably.  And it may be too permissive on huge request size (its IO
size is not limited by read_ahead_kb).

In Quentin's report (http://lkml.org/lkml/2009/12/24/145), the overall
(NFS read) performance of the application increased by 313%!
Tested-by: NQuentin Barnes <qbarnes+nfs@yahoo-inc.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@kernel.org>			[2.6.33.x]
Cc: <qbarnes+nfs@yahoo-inc.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a new UMOUNT_NOFOLLOW flag to umount(2).  This is needed to prevent
symlink attacks in unprivileged unmounts (fuse, samba, ncpfs).

Additionally, return -EINVAL if an unknown flag is used (and specify
an explicitly unused flag: UMOUNT_UNUSED).  This makes it possible for
the caller to determine if a flag is supported or not.

CC: Eugene Teo <eugene@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

apply function to vfsmounts in set returned by collect_mounts(),
stop if it returns non-zero.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Analog of is_subdir for vfsmount,dentry pairs, moved from audit_tree.c
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

No one is calling this anymore as everyone has switched to
invalidate_mapping_pages long time ago.  Also update a few
references to it in comments.  nfs has two more, but I can't
easily figure what they are actually referring to, so I left
them as-is.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

re-order structure super_block to remove 16 bytes of alignment padding
on 64bit builds.

This shrinks the size of super_block from 712 to 696 bytes so requiring
one fewer 64 byte cache lines.
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>

-----
patch against 2.6.33-rc5
compiled & tested on x86_64 AMDX2 desktop machine.

I've been running with this patch applied for several weeks with no
problems.

regards
Richard
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove the EXPORT_UNUSED_SYMBOL of simple_prepare_write

Collapse simple_prepare_write into it's only caller, though
making it simpler and clearer to understand.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This removes 8 bytes of padding from struct inode on 64bit builds, and
so allows 1 more object/slab in the inode_cache when using slub.
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
----
patch against 2.6.33-rc8
compiled & tested on x86_64 AMDX2

I've been running this patch for over a week with no obvious problems
regards
Richard
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

commit 5300990c had stepped on a rather
nasty mess: definitions of ACC_MODE used to be different.  Fixed the
resulting breakage, converting them to variant that takes O_... value;
all callers have that and it actually simplifies life (see tomoyo part
of changes).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Quota code requires unlocked version of this function. Off course
we can just copy-paste the code, but copy-pasting is always an evil.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

This question was determined to be a bug which was fixed in
commit 4a3b0a49.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Cc: Jan Blunck <jblunck@suse.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* pull ACC_MODE to fs.h; we have several copies all over the place
* nightmarish expression calculating f_mode by f_flags deserves a helper
too (OPEN_FMODE(flags))
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

After I_SYNC was split from I_LOCK the leftover is always used together with
I_NEW and thus superflous.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We recently go rid of all callers of do_sync_file_range as they're better
served with vfs_fsync or the filemap_write_and_wait.  Now that
do_sync_file_range is down to a single caller fold it into it so that people
don't start using it again accidentally.  While at it also switch it from
using __filemap_fdatawrite_range(..., WB_SYNC_ALL) to the more clear
filemap_fdatawrite_range().
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Change all async metadata buffers to use [READ|WRITE]_META I/O types
so that the I/O doesn't get issued immediately. This allows merging of
adjacent metadata requests but still prioritises them over bulk data.
This shows a 10-15% improvement in sequential create speed of small
files.

Don't include the log buffers in this classification - leave them as
sync types so they are issued immediately.
Signed-off-by: NDave Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currently the locking in blockdev_direct_IO is a mess, we have three different
locking types and very confusing checks for some of them.  The most
complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be
used.

This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case
is unused anyway, and the write side is almost identical to DIO_NO_LOCKING.
The difference is that DIO_NO_LOCKING always sets the create argument for
the get_blocks callback to zero, but we can easily move that to the actual
get_blocks callbacks.  There are four users of the DIO_NO_LOCKING mode:
gfs already ignores the create argument and thus is fine with the new
version, ocfs2 only errors out if create were ever set, and we can remove
this dead code now, the block device code only ever uses create for an
error message if we are fully beyond the device which can never happen,
and last but not least XFS will need the new behavour for writes.

Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag.  Separate out the check for not allowing to fill holes into a separate
flag, although for now both flags always get set at the same time.

Also revamp the documentation of the locking scheme to actually make sense.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All users outside of fs/ of get_empty_filp() have been removed.  This patch
moves the definition from the include/ directory to internal.h so no new
users crop up and removes the EXPORT_SYMBOL.  I'd love to see open intents
stop using it too, but that's a problem for another day and a smarter
developer!
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently the locking in blockdev_direct_IO is a mess, we have three
different locking types and very confusing checks for some of them.  The
most complicated one is DIO_OWN_LOCKING for reads, which happens to not
actually be used.

This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read
case is unused anyway, and the write side is almost identical to
DIO_NO_LOCKING.  The difference is that DIO_NO_LOCKING always sets the
create argument for the get_blocks callback to zero, but we can easily
move that to the actual get_blocks callbacks.  There are four users of the
DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is
fine with the new version, ocfs2 only errors out if create were ever set,
and we can remove this dead code now, the block device code only ever uses
create for an error message if we are fully beyond the device which can
never happen, and last but not least XFS will need the new behavour for
writes.

Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag.  Separate out the check for not allowing to fill holes into a
separate flag, although for now both flags always get set at the same
time.

Also revamp the documentation of the locking scheme to actually make
sense.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All callers really want the more logical filemap_fdatawait_range interface,
so convert them to use it and merge wait_on_page_writeback_range into
filemap_fdatawait_range.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

The discard ioctl is used by mkfs utilities to clear a block device
prior to putting metadata down.  However, not all devices return zeroed
blocks after a discard.  Some drives return stale data, potentially
containing old superblocks.  It is therefore important to know whether
discarded blocks are properly zeroed.

Both ATA and SCSI drives have configuration bits that indicate whether
zeroes are returned after a discard operation.  Implement a block level
interface that allows this information to be bubbled up the stack and
queried via a new block device ioctl.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

There seems to be a regression in direct write path due to following
commit in for-2.6.33 branch of block tree.

commit 1af60fbd
Author: Jeff Moyer <jmoyer@redhat.com>
Date:   Fri Oct 2 18:56:53 2009 -0400

    block: get rid of the WRITE_ODIRECT flag

Marking direct writes as WRITE_SYNC_PLUG instead of WRITE_ODIRECT, sets
the NOIDLE flag in bio and hence in request. This tells CFQ to not expect
more request from the queue and not idle on it (despite the fact that
queue's think time is less and it is not seeky).

So direct writers lose big time when competing with sequential readers.

Using fio, I have run one direct writer and two sequential readers and
following are the results with 2.6.32-rc7 kernel and with for-2.6.33
branch.

Test
====
1 direct writer and 2 sequential reader running simultaneously.

[global]
directory=/mnt/sdc/fio/
runtime=10

[seqwrite]
rw=write
size=4G
direct=1

[seqread]
rw=read
size=2G
numjobs=2

2.6.32-rc7
==========
direct writes: aggrb=2,968KB/s
readers	     : aggrb=101MB/s

for-2.6.33 branch
=================
direct write: aggrb=19KB/s
readers	      aggrb=137MB/s

This patch brings back the WRITE_ODIRECT flag, with the difference that we
don't set the BIO_RW_UNPLUG flag so that device is not unplugged after
submission of request and an explicit unplug from submitter is required.

That way we fix the jeff's issue of not enough merging taking place in aio
path as well as make sure direct writes get their fair share.

After the fix
=============
for-2.6.33 + fix
----------------
direct writes: aggrb=2,728KB/s
reads: aggrb=103MB/s

Thanks
Vivek
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Hi,

The WRITE_ODIRECT flag is only used in one place, and that code path
happens to also call blk_run_address_space.  The introduction of this
flag, then, could result in the device being unplugged twice for every
I/O.

Further, with the batching changes in the next patch, we don't want an
O_DIRECT write to imply a queue unplug.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Not all users of the topology information want to use libblkid.  Provide
the topology information through bdev ioctls.

Also clarify sector size comments for existing BLK ioctls.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>