Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 25 2月, 2014 1 次提交
    • I
      net/mlx4: Fix limiting number of IRQ's instead of RSS queues · bb2146bc
      由 Ido Shamay 提交于 
      This fix a performance bug introduced by commit 90b1ebe7 "mlx4: set
maximal number of default RSS queues", which limits the numbers of IRQs
opened by core module.
The limit should be on the number of queues in the indirection table -
rx_rings, and not on the number of IRQ's. Also, limiting on mlx4_core
initialization instead of in mlx4_en, prevented using "ethtool -L" to
utilize all the CPU's, when performance mode is prefered, since limiting
this number to 8 reduces overall packet rate by 15%-50% in multiple TCP
streams applications.

For example, after running ethtool -L <ethx> rx 16

          Packet rate
Before the fix  897799
After the fix   1142070

Results were obtained using netperf:

S=200 ; ( for i in $(seq 1 $S) ; do ( \
  netperf -H 11.7.13.55 -t TCP_RR -l 30 &) ; \
  wait ; done | grep "1        1" | awk '{SUM+=$6} END {print SUM}' )

CC: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bb2146bc
  3. 19 2月, 2014 1 次提交
  5. 06 1月, 2014 1 次提交
  7. 01 1月, 2014 1 次提交
  9. 20 12月, 2013 2 次提交
  11. 10 12月, 2013 1 次提交
    • J
      mlx4_core: Roll back round robin bitmap allocation commit for CQs, SRQs, and MPTs · 7c6d74d2
      由 Jack Morgenstein 提交于 
      Commit f4ec9e95 "mlx4_core: Change bitmap allocator to work in round-robin fashion"
introduced round-robin allocation (via bitmap) for all resources which allocate
via a bitmap.

Round robin allocation is desirable for mcgs, counters, pd's, UARs, and xrcds.
These are simply numbers, with no involvement of ICM memory mapping.

Round robin is required for QPs, since we had a problem with immediate
reuse of a 24-bit QP number (commit f4ec9e95).

However, for other resources which use the bitmap allocator and involve
mapping ICM memory -- MPTs, CQs, SRQs -- round-robin is not desirable.

What happens in these cases is the following:

ICM memory is allocated and mapped in chunks of 256K.

Since the resource allocation index goes up monotonically, the allocator
will eventually require mapping a new chunk. Now, chunks are also unmapped
when their reference count goes back to zero.  Thus, if a single app is
running and starts/exits frequently we will have the following situation:

When the app starts, a new chunk must be allocated and mapped.

When the app exits, the chunk reference count goes back to zero, and the
chunk is unmapped and freed. Therefore, the app must pay the cost of allocation
and mapping of ICM memory each time it runs (although the price is paid only when
allocating the initial entry in the new chunk).

For apps which allocate MPTs/SRQs/CQs and which operate as described above,
this presented a performance problem.

We therefore roll back the round-robin allocator modification for MPTs, CQs, SRQs.
Reported-by: NMatthew Finlay <matt@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7c6d74d2
  13. 04 12月, 2013 1 次提交
  15. 08 11月, 2013 1 次提交
  17. 05 11月, 2013 1 次提交
    • J
      mlx4: Structures and init/teardown for VF resource quotas · 5a0d0a61
      由 Jack Morgenstein 提交于 
      This is step #1 for implementing SRIOV resource quotas for VFs.

Quotas are implemented per resource type for VFs and the PF, to prevent
any entity from simply grabbing all the resources for itself and leaving
the other entities unable to obtain such resources.

Resources which are allocated using quotas:  QPs, CQs, SRQs, MPTs, MTTs, MAC,
                                             VLAN, and Counters.

The quota system works as follows:
Each entity (VF or PF) is given a max number of a given resource (its quota),
and a guaranteed minimum number for each resource (starvation prevention).

For QPs, CQs, SRQs, MPTs and MTTs:
50% of the available quantity for the resource is divided equally among
the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module
parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool.
The other 50% is the "free pool", allocated on a first-come-first-serve basis.
For each VF/PF, resources are first allocated from its "guaranteed-minimum"
pool. When that pool is exhausted, the driver attempts to allocate from
the resource "free-pool".

The quota (i.e., max) for the VFs and the PF is:
  The free-pool amount (50% of the real max) + the guaranteed minimum

For MACs:
  Guarantee 2 MACs per VF/PF per port. As a result, since we have only
  128 MACs per port, reduce the allowable number of VFs from 64 to 63.
  Any remaining MACs are put into a free pool.

For VLANs:
  For the PF, the per-port quota is 128 and guarantee is 64
     (to allow the PF to register at least a VLAN per VF in VST mode).
  For the VFs, the per-port quota is 64 and the guarantee is 0.
      We assume that VGT VFs are trusted not to abuse the VLAN resource.

For Counters:
  For all functions (PF and VFs), the quota is 128 and the guarantee is 0.

In this patch, we define the needed structures, which are added to the
resource-tracker struct.  In addition, we do initialization
for the resource quota, and adjust the query_device response to use quotas
rather than resource maxima.

As part of the implementation, we introduce a new field in
mlx4_dev: quotas.  This field holds the resource quotas used
to report maxima to the upper layers (ib_core, via query_device).

The HCA maxima of these values are passed to the VFs (via
QUERY_HCA) so that they may continue to use these in handling
QPs, CQs, SRQs and MPTs.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5a0d0a61
  19. 18 10月, 2013 1 次提交
  21. 02 8月, 2013 1 次提交
  23. 29 7月, 2013 1 次提交
  25. 26 6月, 2013 2 次提交
  27. 24 6月, 2013 1 次提交
  29. 18 6月, 2013 1 次提交
  31. 05 6月, 2013 1 次提交
  33. 25 4月, 2013 2 次提交
  35. 08 3月, 2013 1 次提交
  37. 26 2月, 2013 1 次提交
  39. 08 2月, 2013 1 次提交
  41. 06 2月, 2013 1 次提交
  43. 05 2月, 2013 1 次提交
  45. 01 2月, 2013 1 次提交
  47. 28 1月, 2013 1 次提交
  49. 19 1月, 2013 1 次提交
  51. 20 12月, 2012 2 次提交
  53. 08 12月, 2012 1 次提交
  55. 04 12月, 2012 1 次提交
  57. 27 11月, 2012 1 次提交
    • O
      mlx4: 64-byte CQE/EQE support · 08ff3235
      由 Or Gerlitz 提交于 
      ConnectX-3 devices can use either 64- or 32-byte completion queue
entries (CQEs) and event queue entries (EQEs).  Using 64-byte
EQEs/CQEs performs better because each entry is aligned to a complete
cacheline.  This patch queries the HCA's capabilities, and if it
supports 64-byte CQEs and EQES the driver will configure the HW to
work in 64-byte mode.

The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ.

Since this mode is global, userspace (libmlx4) must be updated to work
with the configured CQE size, and guests using SR-IOV virtual
functions need to know both EQE and CQE size.

In case one of the 64-byte CQE/EQE capabilities is activated, the
patch makes sure that older guest drivers that use the QUERY_DEV_FUNC
command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that
they need an update to be able to work with the PPF. This is done by
changing the returned pf_context_behaviour not to be zero any more. In
case none of these capabilities is activated that value remains zero
and older guest drivers can run OK.

The SRIOV related flow is as follows

1. the PPF does the detection of the new capabilities using
   QUERY_DEV_CAP command.

2. the PPF activates the new capabilities using INIT_HCA.

3. the VF detects if the PPF activated the capabilities using
   QUERY_HCA, and if this is the case activates them for itself too.

Note that the VF detects that it must be aware to the new PF behaviour
using QUERY_FUNC_CAP.  Steps 1 and 2 apply also for native mode.

User space notification is done through a new field introduced in
struct mlx4_ib_ucontext which holds device capabilities for which user
space must take action. This changes the binary interface so the ABI
towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only
when **needed** i.e. only when the driver does use 64-byte CQEs or
future device capabilities which must be in sync by user space. This
practice allows to work with unmodified libmlx4 on older devices (e.g
A0, B0) which don't support 64-byte CQEs.

In order to keep existing systems functional when they update to a
newer kernel that contains these changes in VF and userspace ABI, a
module parameter enable_64b_cqe_eqe must be set to enable 64-byte
mode; the default is currently false.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      08ff3235
  59. 24 10月, 2012 1 次提交
  61. 01 10月, 2012 6 次提交
    • R
      mlx4_core: Disable SENSE_PORT for multifunction devices · aadf4f3f
      由 Roland Dreier 提交于 
      In the current driver, the SENSE_PORT firmware command is issued as a
"wrapped" command, but the command handling code doesn't have a
wrapper, so it will never do anything other than log an error message.
The latest ConnectX-3 2.11.500 firmware reports the SENSE_PORT
capability even in multi-function (SR-IOV) mode, so the driver will
try to issue the command.

At least until the driver has a proper wrapper for SENSE_PORT, make
sure we disable the command for multi-function devices.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      aadf4f3f
    • R
      mlx4_core: Clean up enabling of SENSE_PORT for older (ConnectX-1/-2) HCAs · ca3e57a5
      由 Roland Dreier 提交于 
      Instead of having a hard-coded "PCI device ID != 0x1003" (which
obviously breaks as newer devices with ID != 0x1003 become available),
instead let's set a flag in our PCI device table for the older devices
where we're supposed to force using SENSE_PORT.  This also avoids
enabling SENSE_PORT for virtual functions by mistake.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      ca3e57a5
    • R
      mlx4_core: Stash PCI ID driver_data in mlx4_priv structure · 839f1243
      由 Roland Dreier 提交于 
      That way we can check flags later on, when we've finished with the
pci_device_id structure.  Also convert the "is VF" flag to an enum:
"Never do in the preprocessor what can be done in C."
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      839f1243
    • R
      mlx4_core: Fix crash on uninitialized priv->cmd.slave_sem · f3d4c89e
      由 Roland Dreier 提交于 
      On an SR-IOV master device, __mlx4_init_one() calls mlx4_init_hca()
before mlx4_multi_func_init().  However, for unlucky configurations,
mlx4_init_hca() might call mlx4_SENSE_PORT() (via mlx4_dev_cap()), and
that calls mlx4_cmd_imm() with MLX4_CMD_WRAPPED set.

However, on a multifunction device with MLX4_CMD_WRAPPED, __mlx4_cmd()
calls into mlx4_slave_cmd(), and that immediately tries to do

	down(&priv->cmd.slave_sem);

but priv->cmd.slave_sem isn't initialized until mlx4_multi_func_init()
(which we haven't called yet).  The next thing it tries to do is access
priv->mfunc.vhcr, but that hasn't been allocated yet.

Fix this by moving the initialization of slave_sem and vhcr up into
mlx4_cmd_init(). Also, since slave_sem is really just being used as a
mutex, convert it into a slave_cmd_mutex.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      f3d4c89e
    • R
      mlx4_core: Trivial cleanups to driver log messages · 84b1f153
      由 Roland Dreier 提交于 
      Also put format string onto one line.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      84b1f153
    • J
      mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculations · 47605df9
      由 Jack Morgenstein 提交于 
      Previously, the structure of a guest's proxy QPs followed the
structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1,
qp1 port 2, ...).  The guest then did offset calculations on the
sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP().

This is now changed so that the guest does no offset calculations
regarding proxy or tunnel QPs to use.  This change frees the PPF from
needing to adhere to a specific order in allocating proxy and tunnel
QPs.

Now QUERY_FUNC_CAP provides each port individually with its proxy
qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are
used directly where required (with no offset calculations).

To accomplish this change, several fields were added to the phys_caps
structure for use by the PPF and by non-SR-IOV mode:

    base_sqpn -- in non-sriov mode, this was formerly sqp_start.
    base_proxy_sqpn -- the first physical proxy qp number -- used by PPF
    base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF.

The current code in the PPF still adheres to the previous layout of
sqps, proxy-sqps and tunnel-sqps.  However, the PPF can change this
layout without affecting VF or (paravirtualized) PF code.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      47605df9