Merge branch 'consolidate-clksrc-i8253' of master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource

Conflicts:
	arch/ia64/kernel/cyclone.c
	arch/mips/kernel/i8253.c
	arch/x86/kernel/i8253.c

Reason: Resolve conflicts so further cleanups do not conflict further
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Convert MIPS i8253 clocksource code to use generic i8253 clocksource.
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert x86 i8253 clocksource code to use generic i8253 clocksource.
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert the footbridge isa-timer code to use generic i8253 clocksource.
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is based upon both arch/arm/mach-footbridge/isa-timer.c and
arch/x86/kernel/i8253.c.
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Makefile: Use gcc to determine ARCH
  perf events, x86: Fix Intel Nehalem and Westmere last level cache event definitions
  hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ptrace_set_debugreg()
  sh, hw_breakpoints: Fix racy access to ptrace breakpoints
  arm, hw_breakpoints: Fix racy access to ptrace breakpoints
  powerpc, hw_breakpoints: Fix racy access to ptrace breakpoints
  x86, hw_breakpoints: Fix racy access to ptrace breakpoints
  ptrace: Prepare to fix racy accesses on task breakpoints

The original Makefile uses "uname -m" to determine ARCH.
This causes problem on x86 when compile perf tool on 32 bit
userspace with a 64 bit kernel.

 bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages:
 bench/../../../arch/x86/lib/memcpy_64.S:28: Error: bad register name `%rdi'

This is because "uname -m" returns x86_64 and memcpy_64.S is
included in 32 bit build.
Reported-by: NRiccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/1304743274.3132.17.camel@localhostSigned-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: handle errors from coalesce_t2
  cifs: refactor mid finding loop in cifs_demultiplex_thread
  cifs: sanitize length checking in coalesce_t2 (try #3)
  cifs: check for bytes_remaining going to zero in CIFS_SessSetup
  cifs: change bleft in decode_unicode_ssetup back to signed type

This partially reverts commit e6e1e259.

That commit changed the structure layout of the trace structure, which
in turn broke PowerTOP (1.9x generation) quite badly.

I appreciate not wanting to expose the variable in question, and
PowerTOP was not using it, so I've replaced the variable with just a
padding field - that way if in the future a new field is needed it can
just use this padding field.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix oops in scsi_run_queue()

Otherwise corrupted EFI partition tables can cause total confusion.
Signed-off-by: NTimo Warns <warns@pre-sense.de>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Intel Nehalem offcore bits implemented in:

  e994d7d2: perf: Fix LLC-* events on Intel Nehalem/Westmere

... are wrong: they implemented _ACCESS as _HIT and counted OTHER_CORE_HIT* as
MISS even though its clearly documented as an L3 hit ...

Fix them and the Westmere definitions as well.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1299119690-13991-3-git-send-email-ming.m.lin@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

We make use of ptrace_get_breakpoints() / ptrace_put_breakpoints() to
protect ptrace_set_debugreg() even if CONFIG_HAVE_HW_BREAKPOINT if off.
However in this case, these APIs are not implemented.

To fix this, push the protection down inside the relevant ifdef.
Best would be to export the code inside
CONFIG_HAVE_HW_BREAKPOINT into a standalone function to cleanup
the ifdefury there and call the breakpoint ref API inside. But
as it is more invasive, this should be rather made in an -rc1.

Fixes this build error:

  arch/powerpc/kernel/ptrace.c:1594: error: implicit declaration of function 'ptrace_get_breakpoints' make[2]: ***
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: LPPC <linuxppc-dev@lists.ozlabs.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1304639598-4707-1-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into perf/urgent

* 'for-linus' of git://github.com/at91linux/linux-2.6-at91:
  at91: Add ARCH_ID and basic cpu macros definition for 5series chips family.
  arm: at91: fix compiler warning for eb01 board build
  arm: at91: minimal defconfig for at91x40 SoC
  ARM: at91: AT91CAP9 has a macb device

The logic in __get_user_pages() used to skip the stack guard page lookup
whenever the caller wasn't interested in seeing what the actual page
was.  But Michel Lespinasse points out that there are cases where we
don't care about the physical page itself (so 'pages' may be NULL), but
do want to make sure a page is mapped into the virtual address space.

So using the existence of the "pages" array as an indication of whether
to look up the guard page or not isn't actually so great, and we really
should just use the FOLL_MLOCK bit.  But because that bit was only set
for the VM_LOCKED case (and not all vma's necessarily have it, even for
mlock()), we couldn't do that originally.

Fix that by moving the VM_LOCKED check deeper into the call-chain, which
actually simplifies many things.  Now mlock() gets simpler, and we can
also check for FOLL_MLOCK in __get_user_pages() and the code ends up
much more straightforward.
Reported-and-reviewed-by: NMichel Lespinasse <walken@google.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c
  staging: intel_sst: intelmid needs delay.h
  staging: solo6x10: add select SND_PCM to fix build error
  staging: usbip: vhci: fix oops on subsequent attach
  staging: ft1000: Remove unnecessary EXPORT_SYMBOLs
  staging: rts_pstor: use #ifdef instead of #if
  staging: rts_pstor: Add <linux/vmalloc.h>
  staging: gma500: Depend on X86
  staging: olpc: Add <linux/delay.h>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  xHCI: Clear PLC in xhci_bus_resume()
  USB: fix regression in usbip by setting has_tt flag
  usb/isp1760: Report correct urb status after unlink
  omap:usb: add regulator support for EHCI
  mfd: Fix usbhs_enable error handling
  usb: musb: gadget: Fix out-of-sync runtime pm calls
  usb: musb: omap2430: Fix retention idle on musb peripheral only boards

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: do not call __mark_dirty_inode under i_lock
  libceph: fix ceph_osdc_alloc_request error checks
  ceph: handle ceph_osdc_new_request failure in ceph_writepages_start
  libceph: fix ceph_msg_new error path
  ceph: use ihold() when i_lock is held

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] ngene: Fix CI data transfer regression Fix CI data transfer regression introduced by previous cleanup.
  [media] v4l: make sure drivers supply a zeroed struct v4l2_subdev
  [media] Missing frontend config for LME DM04/QQBOX
  [media] rc_core: avoid kernel oops when rmmod saa7134
  [media] imon: add conditional locking in change_protocol
  [media] rc: show RC_TYPE_OTHER in sysfs
  [media] ite-cir: modular build on ppc requires delay.h include
  [media] mceusb: add Dell transceiver ID

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Fix for broken configrom updates in quick succession

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  flex_arrays: allow zero length flex arrays
  flex_array: flex_array_prealloc takes a number of elements, not an end
  SELinux: pass last path component in may_create

The SLUB allocator use of the cmpxchg_double logic was wrong: it
actually needs the irq-safe one.

That happens automatically when we use the native unlocked 'cmpxchg8b'
instruction, but when compiling the kernel for older x86 CPUs that do
not support that instruction, we fall back to the generic emulation
code.

And if you don't specify that you want the irq-safe version, the generic
code ends up just open-coding the cmpxchg8b equivalent without any
protection against interrupts or preemption.  Which definitely doesn't
work for SLUB.

This was reported by Werner Landgraf <w.landgraf@ru.ru>, who saw
instability with his distro-kernel that was compiled to support pretty
much everything under the sun.  Most big Linux distributions tend to
compile for PPro and later, and would never have noticed this problem.

This also fixes the prototypes for the irqsafe cmpxchg_double functions
to use 'bool' like they should.

[ Btw, that whole "generic code defaults to no protection" design just
  sounds stupid - if the code needs no protection, there is no reason to
  use "cmpxchg_double" to begin with.  So we should probably just remove
  the unprotected version entirely as pointless.   - Linus ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: Nwerner <w.landgraf@ru.ru>
Acked-and-tested-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1105041539050.3005@ionosSigned-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The __mark_dirty_inode helper now takes i_lock as of 250df6ed.  Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: NSage Weil <sage@newdream.net>

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: fix gart setup on fusion parts (v2)
  drm: Send pending vblank events before disabling vblank.
  drm/radeon: fix regression on atom cards with hardcoded EDID record.
  drm/radeon/kms: add some new pci ids

Out of the entire GART/VM subsystem, the hw designers changed
the location of 3 regs.

v2: airlied: add parameter for userspace to work from.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is the least-bad behaviour.  It means that we signal the
vblank event before it actually happens, but since we're disabling
vblanks there's no guarantee that it will *ever* happen otherwise.

This prevents GL applications which use WaitMSC from hanging
indefinitely.
Signed-off-by: NChristopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since fafcf94e introduced an edid size, it seems to have broken this path.

This manifest as oops on T500 Lenovo laptops with dual graphics primarily.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33812

cc: stable@kernel.org
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

In particular, s_freeing_list needs to be initialized early, since it is
used on some of the error paths when mounts fail.  The mapping inode,
for example, would be initialized and then free'd on an error path
before s_freeing_list was initialized, but the inode drop operation
needs the s_freeing_list to be set up.

Normally you'd never see this, because not only is logfs fairly rare,
but a successful mount will never have any issues.
Reported-by: Nwerner <w.landgraf@ru.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent commit closing the race window in device teardown:

commit 86cbfb56
Author: James Bottomley <James.Bottomley@suse.de>
Date:   Fri Apr 22 10:39:59 2011 -0500

    [SCSI] put stricter guards on queue dead checks

is causing a potential NULL deref in scsi_run_queue() because the
q->queuedata may already be NULL by the time this function is called.
Since we shouldn't be running a queue that is being torn down, simply
add a NULL check in scsi_run_queue() to forestall this.
Tested-by: NJim Schutt <jaschut@sandia.gov>
Cc: stable@kernel.org
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Hi us,
   When i was compiling kernel, a warning happened to me.
The warning said like following.

drivers/staging/wlan-ng/cfg80211.c:709: warning: initialization from
incompatible pointer type.

See http://s1202.photobucket.com/albums/bb364/harrywei/?action=view&current=patched2.png
for more details.

So i patch like following.
Signed-off-by: NHarry Wei <harryxiyou@gmail.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch clears PORT_PLC if xhci_bus_resume() resumes a previous suspended
port, because if a port transition from U3 to U0 state, it will report a
port link state change, and software should clear the corresponding PLC bit.

It also uses hcd->speed to check if a port is a USB2 protocol port.

The patch fixes the issue that USB keyboard can not wakeup system from
hibernation.
Signed-off-by: NAndiry Xu <andiry.xu@amd.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>

ceph_osdc_alloc_request returns NULL on failure.
Signed-off-by: NSage Weil <sage@newdream.net>

We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

If memory allocation failed, calling ceph_msg_put() will cause GPF
since some of ceph_msg variables are not initialized first.

Fix Bug #970.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

See 0444d76a.
Signed-off-by: NSage Weil <sage@newdream.net>