Allow the user to override whether MSIs are enabled
or not on supported ASICs.  MSIs are disabled by default
on IGP chips as they tend not to work.  However certain
IGP chips only seem to work with MSIs enabled.

I suspect this is a chipset or bios issue, but I'm not sure
what the proper fix is.  This will at least make diagnosing
and working around the problem much easier.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some Dell laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some HP laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes it easier to add quirks for certain systems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to redefine a connector as "connected" if it matches a window
in the host preferred GUI layout.
Otherwise "smart" window managers would turn on Xorg outputs that we don't
want to be on.

This reinstates the update_layout and adds the following information to
the modesetting system.
a) Connection status <-> Equivalent to real hardware connection status
b) Preferred mode <-> Equivalent to real hardware reading EDID
c) Host window position <-> Equivalent to a real hardware scanout address
dynamic register.

It should be noted that there is no assumption here about what should be
displayed and where. Only how to access the host windows.

This also bumps minor to signal availability of the new IOCTL.

Based on code originally written by Jakob Bornecrantz
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Rather than having a quirk list just always check the EDID header
when probing.  This is the recommended behavior according to the
display team.  This avoids problems with improperly terminated
i2c lines on some boards.  This is also what the proprietary
driver does.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The function didn't work with DP, eDP, or DP bridge
connectors and thus confused users as it lead them to
believe nothing was connected or the EDID was invalid
when in fact is was, just on the aux bus rather an i2c.

It should also speed up module loading as it avoids a
bunch of extra DDC probing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the table version to determine which params to use.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

set up the params based on the table version number.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use table version numbers for param setup.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Leave the common code in radeon_encoders.c and move the atom
specific code to atombios_encoders.c.  This matches legacy
encoder setup and crtc setup.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The vram scratch was originally only used on some 7xx asics
to work around a hw bug.  Allocate the scratch page on all 6xx+
radeons and set the MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR to point
to it.  We shouldn't ever hit it since we limit the system
aperture to vram or vram and AGP, but better safe than sorry.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DP MST is DP multi-stream support, part of DP 1.2.

v2: switch to a helper macro as suggested by Michel.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The existing function was getting too big and complex.
Break it down into a more manageable set of functions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the regular logic for other bridge chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Return the encoder id rather than a boolean.  This is needed
for differentiate between multiple DP bridge chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

radeon_driver_irq_preinstall_kms and radeon_driver_irq_uninstall_kms
hard code the loop to 6 which happens to be the current maximum
number of crtcs and hpd pins; if one day an ASIC with more crtcs
(or hpd pins) comes out, this is a trouble waiting to happen.

introduce constants for maximum CRTC count, maximum HPD pins count
and maximum HDMI blocks count (per FIXME in radeon_irq structure)
and correct the loops in radeon_driver_irq_preinstall_kms and
radeon_driver_irq_uninstall_kms

v2: take care of goofs pointed out by Alex Deucher
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cayman seems to be particularly sensitive to read cache returning
old data after bind/unbind to GTT. Flush read cache for GTT range
with each fences for all new hw. Should fix several rendering glitches.
Like

V2 flush whole address space
V3 also flush shader read cache

https://bugs.freedesktop.org/show_bug.cgi?id=40221
https://bugs.freedesktop.org/show_bug.cgi?id=38022
https://bugzilla.redhat.com/show_bug.cgi?id=738790Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up at module init so first hotplug works
reliably no matter what is the initial set of connector.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The logic was messy and hard to follow.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This should make eDP more reliable.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

CP_COHER_CNTL2 has to be programmed manually when submitting packets
to the ring directly rather than programmed via an IB.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move the TC flush before the texture setup to match mesa and
the ddx. Also, move the TC flush into the texture setup
function.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since force handling rework of d0d0a225
we could end up bouncing connector status btw disconnected and unknown.
When connector status change a call to output_poll_changed happen which
in turn ask again for detect but with force set.

So set the load detect flags whenever we report the connector as
connected or unknown this avoid bouncing btw disconnected and unknown.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This will allow us to attach various properties specific to virtual
monitors in the future.

Note that we don't export an EDID property for "Virtual" connectors.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit dfadbbdb.

Further upstream discussion between Marek and Thomas decided this wasn't
fully baked and needed further work, so revert it before it hits mainline.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit d3ed7402.

Further upstream discussion between Thomas and Marek decided this needed
more work and driver specifics. So revert before it goes upstream.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

abrt files a lot of bug reports when users get GPU lockups, but there's not really
enough context to do anything useful with them.  Given the lack of GPU context being
dumped, this patch removes the stack trace, so that abrt ignores the messages.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

According to the gen6 docs, only the DP_A port (on-CPU eDP) still uses
the old IBX bit shift for the link training pattern setup bits.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The obvious counterpart to is_pch_edp().  Convert existing instances of
the idiom to the new routine.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

SPD frames are actually type 0x83, not just 0x3.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: NKeith Packard <keithp@keithp.com>

Misc fixes based on tests with an infoframe analyzer:
  - checksum *does* include header bytes
  - DIP enable & AVI infoframe are tied together in hw, so disable both
    and make sure AVI frames are enabled first
  - use every vsync flag for SPD frames to avoid reserved value in
    frequency field when enabling both AVI & SPD

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=40281.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: NKeith Packard <keithp@keithp.com>

DPCD 1.1+ adds some automated test infrastructure support.  Add support
for reading the IRQ source and jumping to a test handling routine if
needed.  Subsequent patches will handle particular tests; this patch
just ACKs any requested tests by default.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Read link status first, followed by the full DPCD receiver cap field
rather than just the first 8 bytes.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

These were just working around the math being wrong.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The previous code was confused about units, which is pretty reasonable
given that the units themselves are confusing.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The commit 47356eb6 introduced a
mechanism to record the backlight level only at disabling time, but it
also introduced a regression.  Since intel_lvds_enable() may be called
without disabling (e.g. intel_lvds_commit() calls it unconditionally),
the backlight gets back to the last recorded value.  For example, this
happens when you dim the backlight, close the lid and open the lid,
then the backlight suddenly goes to the brightest.

This patch fixes the bug by recording the backlight level always
when changed via intel_panel_set_backlight().  And,
intel_panel_{enable|disable}_backlight() call the internal function not
to update the recorded level wrongly.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>