Enable support for hdmi for exynos5420 hdmiphy. Add
compatible string in the of_match table. Also added
hdmiphy configuration values for exynos5420.
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Previous SoCs have hdmi phys which are accessible through
dedicated i2c lines. Newer SoCs have Apb mapped hdmi phys.
Hdmi driver is modified to support apb mapped phys.
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Cleaning up unnecessary i2c read call after hdmiphy configuration.
This check is redundant since check for hdmiphy pll lock status
confirms the correct settings for phy.
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Before setting the core and timing generation registers,
hdmi driver resets the whole hdmi hardware, which also
resets the audio related registers.

Hdmi reset is replaced by hdmi disable which is called
just before setting the core and timing registers. It
also ensure that audio settings are not changed.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds a gpio read of hpd during the is_connected
callback. This fixes the case where hdmi is off going into
suspend and the cable is plugged in while suspended. In this
case, the hpd interrupt does not fire and is_connected will
return false.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Our resources were just zalloc'ed as part of hdata.
They are already 0.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Smatch error from arm build: drivers/gpu/drm/exynos/
exynos_hdmi.c:2374 hdmi_probe() error: potential NULL
dereference 'hdata->hdmiphy_port'.

Added check for hdata->hdmiphy_port that it is not NULL.
Signed-off-by: NPaul Taysom <taysom@chromium.org>
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch debounces hotplug interrupts generated by the HDMI hotplug
gpio. The reason this is needed is that we get multiple (5) interrupts
every time a monitor is inserted which causes us to needlessly enable
and disable the IP block.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes the hdmiphy reset in hdmi_poweroff. The hdmiphy reset
was added to take advantage of exynos clockgating, doing it would gate
the entire TV domain. Unfortunately, mixer is included in the TV domain
and its vsync interrupts are stopped when TV is gated.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The recent commit [3ea87855: drm/helper: lock all around force mode
restore] introduced drm_modeset_lock_all() in
drm_helper_resume_force_mode() itself, while exynos driver takes this
lock before calling it.  Move the function call outside the lock for
avoiding a deadlock.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Use DPCD defines of drm_dp_helper.h; thus, duplicated DPCD defines
of exynos_dp_core.h can be removed. Also, DP_TEST_EDID_CHECKSUM
define is added to drm_dp_helper.h. There is no functional change.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch updates phy settings of the below
mentioned pixel clocks in Exynos5250 and removes
support for 88.75MHz, for it is not supported.

71 MHz      - 1280x800@60Hz RB
73.25 MHz   - 800x600@120Hz RB
115.5 MHz   - 1024x768@120Hz RB
119 MHz     - 1680x1050@60Hz RB
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Certain bridge chips use a GPIO to indicate the cable status instead
of the I_DP_HPD pin.  This adds an optional device-tree property,
"samsung,hpd-gpio", to the exynos-dp controller which indicates that
the specified GPIO should be used for hotplug detection.
The GPIO is then set up as an edge-triggered interrupt where the
rising edge indicates hotplug-in and the falling edge indicates hotplug-out.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos drm driver is a single driver so pm operation
for kms drivers should be done by connector->dpms
at top level driver.

If kms driver has its own pm interfaces, single driver model
would be broken so this patch removes unnecessary pm interfaces
from dsi driver.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Exyno drm driver has no real hardware device, and
runtime pm operation should be done by sub drivers.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

The patch separates dpi related routines from fimd.

Changelog v2:
- Rename ctx->dpi to ctx->display
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

subdrv_probe callback of virtual display driver will be
called by exynos_drm_device_subdrv_probe() to create crtc
and encoder/connector for virtual display driver.
So it fixes comments to exynos_drm_device_subdrv probe call.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

When connector is created, if connector->polled is
DRM_CONNECTOR_POLL_CONNECT then drm_kms_helper_hotplug_event
function isn't called at drm_helper_hpd_irq_event because the
function will be called only in case of DRM_CONNECTOR_POLL_HPD.

So this patch sets always DRM_CONNECTOR_POLL_HPD flag to
connector->polled of parallel panel driver at connector creation.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch adds component framework support to resolve
the probe order issue.

Until now, exynos drm had used codes specific to exynos drm
to resolve that issue so with this patch, the specific codes
are removed.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Signed-off-by: NInki Dae <inki.dae@samsung.com>

If any fimd channel was already active, initializing iommu will result
in a PAGE FAULT (e.e. u-boot could have turned on the display and
not disabled it before the kernel starts). This patch checks if any
channel is active before initializing iommu and disables it.
Signed-off-by: NAkshu Agrawal <akshu.a@samsung.com>
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In the case of that only one branch of a conditional statement is
a single statement, braces are added to both branches.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Make local symbols static, because these are used only in this
file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Make local symbole static, because this is used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos drm driver cannot support DRIVER_HAVE_IRQ feature because it uses
driver specific one instead of routine of drm framework to
install/uninstall irq handler.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

AFAICT, the fb_base of a drm_device's mode_config is never used.  It isn't
accessed by core drm, it isn't used by fbmem, and it isn't exposed to user
space.

Furthermore, it is probably supposed to be a physical address, not the
dma address mapped to the display controller, so this is just wrong.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Kernel access to the eyxnos fbdev framebuffer is via its gem object's
kernel mapping (kvaddr, stored in info->screen_base).

User space access is provided by mmap(), read() and write() of /dev/fb/fb0.
These functions also only use screen_base/screen_size().

Therefore, it is not necessary to set fix->smem_{start,len} or
fix->mmio_{start,len} fields.

This avoids leaking kernel, physical and dma mapped addresses to user
space via the ioctls FBIOGET_VSCREENINFO and FBIOGET_FSCREENINFO.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This adds an encoder type for DP MST encoders.
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes drm_get_encoder_name() thread safe.

Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01\
.ptsecurity.ru
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes drm_get_connector_name() thread safe.

[airlied: fix to build.]

Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01.ptsecurity.ruSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 9dc40560 (drm/dp: let drivers specify the name of the I2C-
over-AUX adapter) introduced a new field but didn't add the proper
kernel-doc for it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

shmem_read_mapping_page() uses mapping_gfp_mask(mapping) as default gfp
mask. No reason to use shmem_read_mapping_page_gfp() directly if we want
the default behavior.
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

shmem supports page-relocations during swapin since quite some time. It
was implemented in:

    commit bde05d1c
    Author: Hugh Dickins <hughd@google.com>
    Date:   Tue May 29 15:06:38 2012 -0700

        shmem: replace page if mapping excludes its zone

The gem-comment about wrongly placed DMA32 pages is no longer valid.
Replace it with a proper comment but keep the BUG_ON() to verify correct
shmem behavior.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The shmobile DRM driver is only useful on SuperH and shmobile unless
build testing. I am dropping the SuperH dependencies though because
the driver doesn't even build there, so in practice it is an arm-only
driver for now.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The Renesas R-Car Display Unit driver is only useful on shmobile
unless build testing. The LVDS output is useful on an even more
reduced hardware set.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DRM is pretty much the main user of this stuff (if we ignore the sysfs
interface used by X, i.e. by the same gang of people writing the drm
drivers). So shovel it into Dave's responsibility to avoid patches
getting lost on lkml.

With this get_maintainers will rout vgaarb and switcheroo patches
correctly.

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: linux-kernel@vger.kernel.org
References: https://lkml.org/lkml/2014/5/25/94Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Started documenting drm properties for drm drivers. This patch provides
information about properties in drm, i915, psb and cdv/gma-500. Information
about other properties can be added on top of these.

v2: Added description of drm properties in armada, exynos, i2c/ch7006, noveau,
omap, qxl, radeon, rcar-du

v3: Removed "Property Object" column since it is implementation related. Property
type column refined.[Ville's review comments]

v4: Removed whitespace warnings and minor nits. [Randy's review comments]

v5: Restructured output for ENUM properties

v6: Review comments on formatting the table. [Laurent's review comments]

v7: Minor restructuring. [Laurent's review comments]

Cc: Rob Landley <rob@landley.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Cc: "Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com>
Cc: linux-doc@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The kerneldoc header of ttm_bo_create() was referring to another
(nonexisting) function and had a few obsolete or incorrect arguments.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>