Add two user events for AUX area tracing.

PERF_RECORD_AUXTRACE_INFO contains metadata, consisting primarily the
type of the AUX area tracing data plus some amount of
architecture-specific information.  There should be only one
PERF_RECORD_AUXTRACE_INFO event.

PERF_RECORD_AUXTRACE identifies AUX area tracing data copied from the
mmapped AUX area tracing region.  The actual data is not part of the
event but immediately follows it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-4-git-send-email-adrian.hunter@intel.com
[ s/MIN/min/g and use cast to fix up wrt -Werror=sign-compare till we adopt min_t() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch supports the addition to the kernel of AUX area buffers that
can be mmapped separately from the perf-events buffer.

The AUX buffer can be configured to contain hardware-produced trace
information. The first implementation will support Intel BTS and Intel
PT.

One auxtrace buffer is mmapped per perf-events buffer.  If the requested
auxtrace buffer size is zero, which it will be until further support is
added, then no auxtrace mmapping is attempted.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-3-git-send-email-adrian.hunter@intel.com
[ Fixed conflict in evlist.h ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a feature to indicate that a perf.data file contains AUX area data.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When converting int values, perf first extractes it to a ulonglong, then
feeds it to babeltrace as a signed value.

For negative 32 bit values (for example, return values of failed
syscalls), the extracted data should be something like 0xfffffffe (-2).
It becomes a large int64 value.

Babeltrace denies to insert it with bt_ctf_field_signed_integer_set_value()
because it is larger than 0x7fffffff, the largest positive value a
 32 bit int can be.

This patch introduces adjust_signedness(), which fills high bits of
ulonglong with 1 if the value is negative.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1429372220-6406-8-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
[ s/signess/signedness/g ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some parameters of syscall tracepoints named as 'nr', 'event', etc.
When dealing with them, perf convert to ctf meets some problem:

 1. If a parameter with name 'nr', it will duplicate syscall's
    common field 'nr'. One such syscall is io_submit().

 2. If a parameter with name 'event', it is denied to be inserted
    because 'event' is a CTF spec keyword[1]. One such syscall is
    epoll_ctl.

This patch appends '_dupl_X' suffix to avoid problem 1, prepend a '_'
prefix to avoid problem 2.

[1] http://diamon.org/docs/ctf/v1.8.2/#specC.1.2Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1429372220-6406-7-git-send-email-jolsa@kernel.org
[ changed to use format_file::alias ]
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding support to limit the size of ordered_events queue, so we could
control allocation size of perf data files without proper finished round
events.
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1429372220-6406-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For big data files the size of data allocated for stream instance could
get really high. It's needed to flush the data out of the stream once in
a while.

Unfortunately there's no size indication in the stream object, so we
govern the flush based on the number of stored events. Current flush
limit is set ot 100000 events.
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1429372220-6406-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently we store the data into single data strea/file. The cpu if data
is stored within the event sample. The lttng puts the CPU number that
belongs to the event into the packet context instead into the event.

This patch makes sure that the trace produce by perf does look the same
way. We now use one stream per-CPU. Having it all in one stream
increased the total size of the resulting file. The test went from
416KiB (with perf_cpu event member) to 24MiB due to the required (and
pointless) flush. With the per-cpu streams the total size went up to
588KiB.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1429372220-6406-3-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show message when errors occurred during conversion setup and conversion
process.

Before this patch:
  $ ./perf data convert --to-ctf=ctf
  $ echo $?
  255

After this patch:
  $ ./perf data convert --to-ctf=ctf
  Error during conversion setup.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvhr1vf7zav9kkeo9w1hv4uk@git.kernel.org
Link: http://lkml.kernel.org/r/1429372220-6406-2-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The period_ratio_delta, period_ratio and wdiff are never by used at the
same time.  Instead, Just one of them is accessed according to a
comparison method.  So make it union to reduce memory footprint.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429416255-12070-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's not used anywhere, let's get rid of it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429416255-12070-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The first argument passed to find_probe_point_lazy() should be CU die,
which will be passed to die_walk_lines() when lazy_line matches.
Currently, when we probe with lazy_line pattern to file without function
name, NULL pointer is passed and causes a segment fault.

Can be reproduced as following:

  $ perf probe -k vmlinux --add='fs/super.c;s->s_count=1;'
  [ 1958.984658] perf[1020]: segfault at 10 ip 00007fc6e10d8c71 sp
  00007ffcbfaaf900 error 4 in libdw-0.161.so[7fc6e10ce000+34000]
  Segmentation fault

After this patch:

  $ perf probe -k vmlinux --add='fs/super.c;s->s_count=1;'
  Added new event:
  probe:_stext         (on @fs/super.c)

  You can now use it in all perf tools, such as:
    perf record -e probe:_stext -aR sleep 1
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428925290-5623-3-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we use lazy matching, it failed to open a souce file if perf command
is invoked outside of compilation directory:

$ perf probe -a '__schedule;clear_*'
Failed to open kernel/sched/core.c: No such file or directory
  Error: Failed to add events. (-2)

OTOH, other commands like "probe -L" can solve the souce directory by
themselves. Let's make it possible for lazy matching too!
Signed-off-by: NNaohiro Aota <naota@elisp.net>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426223923-1493-1-git-send-email-naota@elisp.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When perf probe searched in a debuginfo file and failed, it tried with
an alternative, in function get_alternative_probe_event():

        memcpy(tmp, &pev->point, sizeof(*tmp));
        memset(&pev->point, 0, sizeof(pev->point));

In this case, it drops the retprobe flag and forgets to set it back in
find_alternative_probe_point(), so the problem occurs.

Can be reproduced as following:

  $ perf probe -v -k vmlinux --add='sys_write%return'
  ...
  Added new event:
  Writing event: p:probe/sys_write _stext+1584952
    probe:sys_write      (on sys_write%return)

  $ cat /sys/kernel/debug/tracing/kprobe_events
  p:probe/sys_write _stext+1584952

After this patch:

  $ perf probe -v -k vmlinux --add='sys_write%return'
  Added new event:
  Writing event: r:probe/sys_write SyS_write+0
    probe:sys_write      (on sys_write%return)

  $ cat /sys/kernel/debug/tracing/kprobe_events
  r:probe/sys_write SyS_write
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428925290-5623-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The data_head and data_tail fields are defined as __u64 in
linux/perf_event.h, but perf userspace uses int and unsigned int.

Convert all references to u64 for consistency.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428420037-26599-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Support multiple probes on different binaries with just
one command.

In the result, this example sets up the probes on icmp_rcv in
kernel, on main and set_target in perf, and on pcspkr_event
in pcspker.ko driver.
  -----
  # perf probe -a icmp_rcv -x ./perf -a main -a set_target \
   -m /lib/modules/4.0.0-rc5+/kernel/drivers/input/misc/pcspkr.ko \
   -a pcspkr_event
  Added new event:
    probe:icmp_rcv       (on icmp_rcv)

  You can now use it in all perf tools, such as:

          perf record -e probe:icmp_rcv -aR sleep 1

  Added new event:
    probe_perf:main      (on main in /home/mhiramat/ksrc/linux-3/tools/perf/perf)

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:main -aR sleep 1

  Added new event:
    probe_perf:set_target (on set_target in /home/mhiramat/ksrc/linux-3/tools/perf/perf)

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:set_target -aR sleep 1

  Added new event:
    probe:pcspkr_event   (on pcspkr_event in pcspkr)

  You can now use it in all perf tools, such as:

          perf record -e probe:pcspkr_event -aR sleep 1
  -----
Reported-by: NArnaldo Carvalho de Melo <acme@infradead.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150401102539.17137.46454.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

commit: f3b623b8 ("perf tools: Reference count struct thread")
appends every thread->node to dead_threads in machine__remove_thread()
and list_del_init() this node in thread__put().

perf_event__exit_del_thread() releases thread wihout using
machine__remove_thread(), and causes a NULL pointer crash when
list_del_init(&thread->node) is called. Fix this by using
machine_remove_thread() instead of using thread__put() directly.

This problem can be reproduced as following:

  $ perf record ls
  $ perf buildid-list --with-hits
  [ 3874.195070] perf[1018]: segfault at 0 ip 00000000004b0b15 sp
  00007ffc35b44780 error 6 in perf[400000+166000]
  Segmentation fault

After this patch:
  $ perf record ls
  $ perf buildid-list --with-hits
  bc23e7c3281e542650ba4324421d6acf78f4c23e /proc/kcore
  643324cb0e969f30c56d660f167f84a150845511 [vdso]
  0000000000000000000000000000000000000000 /bin/busybox
  ...
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428658500-6483-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Trying to analyze a big endian data file on little endian system fails
with the error:

  0xa9b40 [0x70]: failed to process type: 9

The problem is that header parsing is not done correctly because the
file attributes are not swapped. Make it so. With this patch able to
analyze a sparc64 data file on x86_64.
Signed-off-by: NDavid Ahern <david.ahern@oracle.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1428610546-178789-1-git-send-email-david.ahern@oracle.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When traversing /proc to synthesize the PERF_RECORD_FORK et al events we
were bailing out on errors without calling closedir(), fix it.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vxtp593rfztgbi8noy0m967p@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit ca6c41c5 sets the ppid based on what is read from the
/proc/pid/status file when synthesizing fork events.

This is correct thing to do for new processes but not threads of a
process.

Fix ppid for threads to be the main thread when synthesizing fork events
(ie., assume main thread spawned all sub-threads in a process).
Reported-by: NArnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: NDavid Ahern <david.ahern@oracle.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1428598107-178999-1-git-send-email-david.ahern@oracle.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding 'I' event modifier to have complete set of modifiers for
perf_event_attr:exclude_* bits.

Any event specified with 'I' modifier will have the
perf_event_attr:exclude_idle bit set.

  $ perf record -e cycles:I -vv ls 2>&1 | grep exclude_idle
  exclude_hv          0    exclude_idle        1

Adding automated tests.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 9b118aca ("perf probe: Fix to
handle aliased symbols in glibc") uses an absolute format '%lx' to
print u64 argument, which causes compiling error on ARM 32.

This patch replaces it with PRIx64.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1428459274-138470-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently there's 3 (that I found) different and incomplete
implementations of printing perf_event_attr.

This is quite silly. Merge the lot.

While this patch does not retain the exact form all printing that I
found is debug output and thus it should not be critical.

Also, I cannot find a single print_event_desc() caller.

Pre:

 $ perf record -vv -e cycles -- sleep 1
 ------------------------------------------------------------
 perf_event_attr:
  type                0
  size                104
  config              0
  sample_period       4000
  sample_freq         4000
  sample_type         0x107
  read_format         0
  disabled            1    inherit             1
  pinned              0    exclusive           0
  exclude_user        0    exclude_kernel      0
  exclude_hv          0    exclude_idle        0
  mmap                1    comm                1
  mmap2               1    comm_exec           1
  freq                1    inherit_stat        0
  enable_on_exec      1    task                1
  watermark           0    precise_ip          0
  mmap_data           0    sample_id_all       1
  exclude_host        0    exclude_guest       1
  excl.callchain_kern 0    excl.callchain_user 0
  wakeup_events       0
  wakeup_watermark    0
  bp_type             0
  bp_addr             0
  config1             0
  bp_len              0
  config2             0
  branch_sample_type  0
  sample_regs_user    0
  sample_stack_user   0
  sample_regs_intr    0
 ------------------------------------------------------------

 $ perf evlist  -vv
 cycles: sample_freq=4000, size: 104, sample_type: IP|TID|TIME|PERIOD,
 disabled: 1, inherit: 1, mmap: 1, mmap2: 1, comm: 1, comm_exec: 1,
 freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1

 Post:

 $ ./perf record -vv -e cycles -- sleep 1
 ------------------------------------------------------------
 perf_event_attr:
  size                             112
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|PERIOD
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  freq                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  exclude_guest                    1
  mmap2                            1
  comm_exec                        1
------------------------------------------------------------

 $ ./perf evlist  -vv
 cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
 IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq:
 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1,
 mmap2: 1, comm_exec: 1
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150407091150.644238729@infradead.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Teach perf-record about the new perf_event_attr::{use_clockid, clockid}
fields. Add a simple parameter to set the clock (if any) to be used for
the events to be recorded into the data file.

Since we store the entire perf_event_attr in the EVENT_DESC section we
also already store the used clockid in the data file.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/r/20150407154851.GR23123@twins.programming.kicks-ass.net
[ Conditionally define CLOCK_BOOTTIME, at least rhel6 doesn't have it - dsahern
  Ditto for CLOCK_MONOTONIC_RAW, sles11sp2 doesn't have it - yunlong.song ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch add checks in places where map__kmap is used to get kmaps
from struct kmap.

Error messages are added at map__kmap to warn invalid accessing of kmap
(for the case of !map->dso->kernel, kmap(map) does not exists at all).

Also, introduces map__kmaps() to warn uninitialized kmaps.
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1428394966-131044-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf_evlist__mmap_consume() uses perf_mmap__empty() to judge whether
perf_mmap is empty and can be released. But the result is inverted so
fix it.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428399071-7141-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enable perf data convert to use perf.data when it is not owned by
current user or root.

Example:

 # perf record ls
 # chown Yunlong.Song:Yunlong.Song perf.data
 # ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr  2 17:35 perf.data
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf data convert --to-ctf=./ctf-data/
 File perf.data not owned by current user or root (use -f to override)
 # perf data convert --to-ctf=./ctf-data/ -f
   Error: unknown switch `f'

  usage: perf data convert [<options>]

     -v, --verbose         be more verbose
     -i, --input <file>    input file name
         --to-ctf ...      Convert to CTF format

After this patch:

 # perf data convert --to-ctf=./ctf-data/
 File perf.data not owned by current user or root (use -f to override)
 # perf data convert --to-ctf=./ctf-data/ -f
 # ls ctf-data/
 metadata  perf_stream_0

As shown above, the -f option really works now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-11-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enable perf kvm to use perf.data.guest when it is not owned by current
user or root.

Example:

 # perf kvm stat record ls
 # chown Yunlong.Song:Yunlong.Song perf.data.guest
 # ls -al perf.data.guest
 -rw------- 1 Yunlong.Song Yunlong.Song 4128937 Apr  2 11:05 perf.data.guest
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf kvm stat report
 File perf.data.guest not owned by current user or root (use -f to override)
 Initializing perf session failed
 # perf kvm stat report -f
   Error: unknown switch `f'

  usage: perf kvm stat report [<options>]

         --event <report event>
                           event for reporting: vmexit, mmio (x86 only),
                           ioport (x86 only)
         --vcpu <n>        vcpu id to report
     -k, --key <sort-key>  key for sorting: sample(sort by samples
 						   number) time (sort by avg time)
     -p, --pid <pid>       analyze events only for given process id(s)

As shown above, the -f option does not work at all.

After this patch:

 # perf kvm stat report
 File perf.data.guest not owned by current user or root (use -f to override)
 Initializing perf session failed
 # perf kvm stat report -f
 Analyze events for all VMs, all VCPUs:

   VM-EXIT    Samples  Samples%     Time%    Min Time    Max Time   Avg time

 Total Samples:0, Total events handled time:0.00us.

As shown above, the -f option really works now. Since we have not
launched any KVM related process, the result shows 0 sample here.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-5-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enable perf evlist to use perf.data when it is not owned by current user
or root.

Example:

 # perf record ls
 # chown Yunlong.Song:Yunlong.Song perf.data
 # ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr  2 10:18 perf.data
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf evlist
 File perf.data not owned by current user or root (use -f to override)
 # perf evlist -f
   Error: unknown switch `f'

  usage: perf evlist [<options>]

     -i, --input <file>    Input file name
     -F, --freq            Show the sample frequency
     -v, --verbose         Show all event attr details
     -g, --group           Show event group information

As shown above, the -f option does not work at all.

After this patch:

 # perf evlist
 File perf.data not owned by current user or root (use -f to override)
 # perf evlist -f
 cycles

As shown above, the -f option really works now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-2-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix 'perf probe' to track down unnamed union/structure members.

perf probe did not track down the tree of unnamed union/structure
members, since it just failed to find given "name" in a parent
structure/union.  To solve this issue, I've introduced 2 changes.

- Fix die_find_member() to track down the type-DIE if it is
  unnamed, and if it contains the specified member, returns the
  unnamed member.
  (note that we don't return found member, since unnamed member
   has the offset in the parent structure)
- Fix convert_variable_fields() to track down the unnamed union/
  structure (one-by-one).

With this patch, perf probe can access unnamed fields:
  -----
  #./perf probe -nfx ./perf lock__delete ops 'locked_ops=ops->locked.ops'
  Added new event:
    probe_perf:lock__delete (on lock__delete in /home/mhiramat/ksrc/linux-3/tools/perf/perf with ops locked_ops=ops->locked.ops)

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:lock__delete -aR sleep 1
  -----
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Report-Link: https://lkml.org/lkml/2015/3/5/431Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150402073312.14482.37942.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As it comes from address_location->thread, that is already stored as
export_sample->al, where the thread can be obtained.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20150402141542.GA9630@kernel.org
Link: http://lkml.kernel.org/n/tip-bzotbl4epoztw0jd6sm2stpf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As it is available via another parameter, address_location->thread.
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: lkml.kernel.org/r/551D08F8.3040706@intel.com
Link: http://lkml.kernel.org/n/tip-6dbn0tcm9hyv92g7h3zj2dbt@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is already in the addr_location, so remove the redundant 'thread'
parameter from the callback signatures.
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1427906210-10519-3-git-send-email-acme@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As these can be obtained from the ordered_events pointer, via
container_of, reducing the cross section of ordered_samples.

These were added to ordered_samples in:

 commit b7b61cbe
 Author: Arnaldo Carvalho de Melo <acme@redhat.com>
 Date:   Tue Mar 3 11:58:45 2015 -0300

    perf ordered_events: Shorten function signatures

    By keeping pointers to machines, evlist and tool in ordered_events.

But that was more a transitional patch while moving stuff out from
perf_session.c to ordered_events.c and possibly not even needed by then,
as we could use the container_of() method and instead of having the
nr_unordered_samples stats in events_stats, we can have it in
ordered_samples.
Based-on-a-patch-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4lk0t9js82g0tfc0x1onpkjt@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Even when it is not used to actually reorder events, some of its fields
are used, like session->ordered_events->tool, to shorten function
signatures where tool, for instance, was being passed, as the tool is
needed for the ordered_events code, we need it there and might as well
use it for other perf_session needs.

This fixes a problem where 'perf script' had some condition that made
session->ordered_events not to be initialized even with its
script->tool ordered_events related flags asking for it to be, which
looks like another bug and needs to be investigated further.

Always initializing session->ordered_events at least leaves the current
assumptions in place, so do it now.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b1xxk0rwkz2a0gip1uufmjqg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

363b785f added synthesized fork events and set a thread's parent id to
itself. Since we are already processing /proc/<pid>/status the ppid can
be determined properly. Make it so.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/1427747758-18510-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Rather than parsing /proc/pid/status file one line at a time, read it
into a buffer in one shot and search for all strings in one pass.

tgid conversion also simplified -- removing the isspace walk. As noted
by Arnaldo those are not needed for atoi == strtol calls.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/1427747758-18510-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 2e77784b ("perf callchain: Move cpumode resolve code to
add_callchain_ip") promised "No change in behavior.".

As this commit breaks callchains on s390x (symbols not getting resolved,
observed when profiling the kernel), this statement is wrong. The cpumode
must be kept when iterating over all ips, otherwise the default
(PERF_RECORD_MISC_USER) will be used by error.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1427703060-59883-1-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use of a bad filter currently generates the message:
 Error: failed to set filter with 22 (Invalid argument)

Add the event name to make it clear to which event the filter
failed to apply:
  Error: Failed to set filter "foo" on event sched:sg_lb_stats: 22: Invalid argument

To test it use something like:

 # perf record -e sched:sched_switch -e sched:*fork --filter parent_pid==1 -e sched:*wait* --filter bla usleep 1
  Error: failed to set filter "bla" on event sched:sched_stat_iowait with 22 (Invalid argument)
 #
Based-on-a-patch-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d7gq2fjvaecozp9o2i0siifu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf timechart -T on sparc64 is terminating due to SIGBUS. Backtrace:

Program received signal SIGBUS, Bus error.
0x0000000000173d7c in perf_evsel__intval (evsel=<value optimized out>, sample=0x7feffffda28, name=0x289b28 "prev_state")
    at util/evsel.c:1918
1918	util/evsel.c: No such file or directory.
	in util/evsel.c
Missing separate debuginfos, use: debuginfo-install audit-libs-2.3.7-1.0.1.el6.sparc64 bzip2-libs-1.0.5-7.el6_0.sparc64 elfutils-libelf-0.155-2.0.3.el6.sparc64 elfutils-libs-0.155-2.0.3.el6.sparc64 glibc-2.12-1.132.0.8.el6_5.sparc64 numactl-2.0.7-8.el6.sparc64 python-libs-2.6.6-52.0.2.el6.sparc64 slang-2.2.1-1.el6.sparc64 xz-libs-4.999.9-0.3.beta.20091007git.el6.sparc64 zlib-1.2.3-29.el6.sparc64
(gdb) bt
0  0x0000000000173d7c in perf_evsel__intval (evsel=<value optimized out>, sample=0x7feffffda28,
    name=0x289b28 "prev_state") at util/evsel.c:1918
1  0x0000000000123b94 in process_sample_sched_switch (tchart=0x7feffffe040, evsel=0x4ca850, sample=0x7feffffda28,
    backtrace=0xc39010 "") at builtin-timechart.c:627
2  0x0000000000122828 in process_sample_event (tool=0x7feffffe040, event=<value optimized out>, sample=0x7feffffda28,
    evsel=0x4ca850, machine=0x4c9c88) at builtin-timechart.c:569

Another extended load on unaligned pointer. As before fix by copying to
a temporary variable using memcpy.
Signed-off-by: NDavid Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1427228049-51893-1-git-send-email-david.ahern@oracle.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>