* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4694/1: IXP4xx: Update clockevent support for shutdown and resume
  [ARM] 4710/1: Fix coprocessor 14 usage for debug messages via ICEDCC
  [ARM] 4690/1: PXA: fix CKEN corruption in PXA27x AC97 cold reset code
  [ARM] 4667/1: CM-X270 fixes

Add proper support for CLOCK_EVT_MODE_RESUME and in the process fix
CLOCK_EVT_MODE_SHUTDOWN so that only the enable bits are toggled for both.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

According to ARM7TDMI Technical Reference Manual (ARM DDI 0210C) writing
to the DCC data write register coproc dest registers are 1 and 0, not 0
and 1.

ARM920T TRM (ARM DDI 0151C) agrees on that.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [IRDA]: irda parameters warning fixes.
  [IRDA]: stir4200 fixes.
  [IRDA]: irlmp_unregister_link() needs to free lsaps.
  [IRDA]: mcs7780 needs to free allocated rx buffer.
  [IRDA]: Race between open and disconnect in irda-usb.
  [SCTP]: Flush fragment queue when exiting partial delivery.
  [AX25]: Locking dependencies fix in ax25_disconnect().
  [IPV4]: Make tcp_input_metrics() get minimum RTO via tcp_rto_min()
  [IPV6]: Fix the return value of ipv6_getsockopt
  [BRIDGE]: Assign random address.
  [IPV4]: Updates to nfsroot documentation
  [ATM]: Fix compiler warning noise with FORE200E driver
  [NETFILTER]: bridge: fix missing link layer headers on outgoing routed packets
  [SYNCPPP]: Endianness and 64bit fixes.
  [TIPC]: Fix semaphore handling.
  [NETFILTER]: xt_hashlimit should use time_after_eq()
  [XFRM]: Display the audited SPI value in host byte order.
  [NETFILTER]: ip_tables: fix compat copy race
  [NETFILTER]: ctnetlink: set expected bit for related conntracks

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Silence sparc32 warnings on missing syscalls.
  [SPARC64]: Fix two kernel linear mapping setup bugs.

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] pud_present/pmd_present bug.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Make PS3_SYS_MANAGER default y, not m
  [POWERPC] Fix rounding bug in emulation for double float operating
  [POWERPC] iSeries: don't printk with HV spinlock held
  [POWERPC] 82xx: mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCC
  [POWRPC] CPM2: Eliminate section mismatch warning in cpm2_reset().
  [POWERPC] Kill non-existent symbols from ksyms and commproc.h
  [POWERPC] Fix typo #ifdef -> #ifndef

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Ensure that ST0_FR is never set on a 32 bit kernel
  [MIPS] time: Delete weak definition of plat_time_init() due to gcc bug.
  [MIPS] PCI: Make pcibios_fixup_device_resources ignore legacy resources.
  [MIPS] Atlas, Malta: Don't free firmware memory on free_initmem.
  [MIPS] Alchemy: fix off by two error in __fixup_bigphys_addr()
  [MIPS] Alchemy: fix PCI resource conflict
  [MIPS] time: Set up Cobalt's mips_hpt_frequency

Git commit 3610cce8 (yeah my own :-/)
introduced a bug in regard to pud/pmd table entries.
If the address of the page table refered to by a pud/pmd value happens
to have zeroes in the lower 32 bits, pud_present and pmd_present return
false. The obvious effect is that this triggers the BUG_ON in exit_mmap
because some ptes will not get released on process end.  Worse is that
the next fault for memory covered by that pud/pmd will allocate another
pmd/pte table and populate the pud/pmd entry. The old page table
entries hanging below this entry are lost!

The fix is simple, properly check against 0. The check is added for
pud_none/pmd_none as well even if these two functions work because
the invalid bit is in the lower 32 bits.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch fixes:
  CHECK   /home/kernel/src/net/irda/parameters.c
/home/kernel/src/net/irda/parameters.c:466:2: warning: Using plain integer as NULL pointer
/home/kernel/src/net/irda/parameters.c:520:2: warning: Using plain integer as NULL pointer
/home/kernel/src/net/irda/parameters.c:573:2: warning: Using plain integer as NULL pointer
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Olaf Hartmann <olaf.hartmann@s1998.tu-chemnitz.de>

The attached patch observes the stir4200 fifo size and will clear the
fifo, if the size is increasing, while it should be transmitting bytes
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing the mcs7780 based IrDA USB dongle I've stumbled upon
memory leak in irlmp_unregister_link(). Hashbin for lsaps is created in
irlmp_register_link and should probably be freed in irlmp_unregister_link().
Signed-off-by: NHinko Kocevar <hinko.kocevar@cetrtapot.si>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing the mcs7780 based IrDA USB dongle I've stumbled upon
memory leak in mcs_net_close(). Patch below fixes it.
Signed-off-by: NHinko Kocevar <hinko.kocevar@cetrtapot.si>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems to me that irda_usb_net_open() must set self->netopen
under spinlock or disconnect() may fail to kill all URBs, if it is called
while an interface is opened.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the end of partial delivery, we may have complete messages
sitting on the fragment queue.  These messages are stuck there
until a new fragment arrives.  This can comletely stall a
given association.  When clearing partial delivery state, flush
any complete messages from the fragment queue and send them on
their way up.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bernard Pidoux reported these lockdep warnings:

[ INFO: possible irq lock inversion dependency detected ]
2.6.23.1 #1
---------------------------------------------------------
fpac/4933 just changed the state of lock:
 (slock-AF_AX25){--..}, at: [<d8be3312>] ax25_disconnect+0x46/0xaf
 [ax25]
 but this lock was taken by another, soft-irq-safe lock in the past:
  (ax25_list_lock){-+..}

  and interrupts could create inverse lock ordering between them.
  [...]

[ INFO: inconsistent lock state ]
2.6.23.1 #1
---------------------------------
inconsistent {in-softirq-W} -> {softirq-on-W} usage.
ax25_call/4005 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (slock-AF_AX25){-+..}, at: [<d8b79312>] ax25_disconnect+0x46/0xaf [ax25]
 [...]

This means slock-AF_AX25 could be taken both from softirq and process
context with softirqs enabled, so it's endangered itself, but also makes
ax25_list_lock vulnerable. It was not 100% verified if the real lockup
can happen, but this fix isn't very costly and looks safe anyway.
(It was tested by Bernard with 2.6.23.9 and 2.6.24-rc5 kernels.)


Reported_by: Bernard Pidoux <pidoux@ccr.jussieu.fr>
Tested_by: Bernard Pidoux <pidoux@ccr.jussieu.fr>
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_input_metrics() refers to the built-time constant TCP_RTO_MIN
regardless of configured minimum RTO with iproute2.
Signed-off-by: NSatoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If CONFIG_NETFILTER if not selected when compile the kernel source code, 
ipv6_getsockopt will returen an EINVAL error if optname is not supported by
the kernel. But if CONFIG_NETFILTER is selected, ENOPROTOOPT error will 
be return.

This patch fix to always return ENOPROTOOPT error if optname argument of 
ipv6_getsockopt is not supported by the kernel.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Assigning a valid random address to bridge device solves problems
when bridge device is brought up before adding real device to bridge.
When the first real device is added to the bridge, it's address
will overide the bridges random address.

Note: any device added to a bridge must already have a valid
ethernet address.
 br_add_if -> br_fdb_insert -> fdb_insert -> is_valid_ether_addr
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The difference between ip=off and ip=::::::off has been a cause of much
confusion.  Document how each behaves, and do not contradict ourselves by
saying that "off" is the default when in fact "any" is the default and is
descibed as being so lower in the file.
Signed-off-by: NAmos Waterland <apw@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc throws these warnings with:

CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_PCA is not set

drivers/atm/fore200e.c:2695: warning: 'fore200e_pca_detect' defined but
not used
drivers/atm/fore200e.c:2748: warning: 'fore200e_pca_remove_one' defined
but not used

By moving the #ifdef CONFIG_ATM_FORE200E_PCA around those two functions,
the compiler warnings are silenced.
Signed-off-by: NTom "spot" Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by Damien Thebault, the double POSTROUTING hook invocation
fix caused outgoing packets routed between two bridges to appear without
a link-layer header. The reason for this is that we're skipping the
br_nf_post_routing hook for routed packets now and don't save the
original link layer header, but nevertheless tries to restore it on
output, causing corruption.

The root cause for this is that skb->nf_bridge has no clearly defined
lifetime and is used to indicate all kind of things, but that is
quite complicated to fix. For now simply don't touch these packets
and handle them like packets from any other device.
Tested-by: NDamien Thebault <damien.thebault@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	* trivial annotations
	* long != 32bit, use __be32
	* wrong endianness in sending CISCO_ADDR_REPLY
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noted by Kevin, tipc's release() does down_interruptible() and
ignores the return value.  So if signal_pending() we'll end up doing
up() on a non-downed semaphore.  Fix.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to avoid jiffies wraparound and its effect, special care must
be taken
when doing comparisons ...
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the IPsec protocol SPI values are written to the audit log in
network byte order which is different from almost all other values which
are recorded in host byte order.  This patch corrects this inconsistency
by writing the SPI values to the audit record in host byte order.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When copying entries to user, the kernel makes two passes through the
data, first copying all the entries, then fixing up names and counters.
On the second pass it copies the kernel and match data from userspace
to the kernel again to find the corresponding structures, expecting
that kernel pointers contained in the data are still valid.

This is obviously broken, fix by avoiding the second pass completely
and fixing names and counters while dumping the ruleset, using the
kernel-internal data structures.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is a fix. It sets IPS_EXPECTED for related conntracks.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

klaptopd assumes rate to be in same units as capacity.

http://bugzilla.kernel.org/show_bug.cgi?id=9362Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=9362Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Alarm bit should be cleared in order for other alarms to be sent.
http://bugzilla.kernel.org/show_bug.cgi?id=9362Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Silence sparc32 warnings on missing syscalls, these won't be added.
This patch is based on this mail:
http://www.mail-archive.com/linux-arch@vger.kernel.org/msg02571.htmlSigned-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Frank Rowand <frank.rowand@am.sony.com> reports:

> In linux-2.6.24-rc4 the Toshiba RBTX4927 hangs on boot.
>
> The cause is that plat_time_init() from arch/mips/tx4927/common/
> tx4927_setup.c does not override the __weak plat_time_init() from
> arch/mips/kernel/time.c.  This is due to a compiler bug in gcc 4.1.1.  The
> bug is reported to not exist in earlier versions of gcc, and to be fixed in
> 4.1.2.  The problem is that the __weak plat_time_init() is empty and thus
> gets optimized out of existence (thus the linker is never given the option
> to replace the __weak function).

[ He meant the call to plat_time_init() from time_init() gets optimized away ]

> For more info on the gcc bug see
>
>    http://gcc.gnu.org/bugzilla/show_bug.cgi?id=27781
>
> The attached patch is one workaround.  Another possible workaround

[ His patch adds -fno-unit-at-a-time for time.c ]

> would be to change the __weak plat_time_init() to be a non-empty
> function.

The __weak definition of plat_time_init was only ever meant to be a
migration helper to keep platforms that don't have a plat_time_init
compiling.  A few greps says that all platforms now supply their own
plat_time_init() so the weak definition is no longer needed.  So I
instead delete it.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There might be other reasons why a resource might be marked as fixed
such as a PCI UART holding the system console but until we use
IORESOURCE_PCI_FIXED that way also this will work.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A proper fix for this needs to turn a few MIPS-generic bits which I
don't want at this stage.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

the PCI specific code in this function doesn't check for the address range
being under the upper bound of the PCI memory window correctly -- fix this,
somewhat beautifying the code around the check, while at it...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

... by getting the PCI resources back into the 32-bit range -- there's no
need therefore for CONFIG_RESOURCES_64BIT either. This makes Alchemy PCI
work again while currently the kernel skips the bus scan.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>