PTRACE_SYSEMU{,_SINGLESTEP} is actually arch specific, for now, and the
current allocated number clashes with a ptrace code of frv, i.e.
PTRACE_GETFDPIC.  I should have submitted this much earlier, anyway we get no
breakage for this.

CC: Daniel Jacobowitz <dan@debian.org>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the redundant spinlock in the function resolve_symbol() as we are
not altering the module list, and we already hold the semaphore.
Signed-off-by: NAshutosh Naik <ashutosh.naik@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reduce the size of the pageframe for NR_CPUS>4, CONFIG_PREEMPT back to the
minimal size by unionising both ->private and ->mapping with the pagetable
lock.

It uses an anonymous struct and hence requires gcc-3.x.

Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reorder members of the kiocb structure to make sync kiocb setup faster.  By
setting the elements sequentially, the write combining buffers on the CPU
are able to combine the writes into a single burst, which results in fewer
cache cycles being consumed, freeing them up for other code.  This results
in a 10-20KB/s[*] increase on the bw_unix part of LMbench on my test
system.

* The improvement varies based on what other patches are in the system,
  as there are a number of bottlenecks, so this number is not absolutely
  accurate.
Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently TAINT_FORCED_RMMOD is totally unused.  Because it is marked as
TAINT_FORCED_MODULE instead when user forced a module unload.  This patch
marks it correctly
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Ensure that an exported symbol does not already exist in the kernel or in
some other module's exported symbol table.  This is done by checking the
symbol tables for the exported symbol at the time of loading the module.
Currently this is done after the relocation of the symbol.
Signed-off-by: NAshutosh Naik <ashutosh.naik@gmail.com>
Signed-off-by: NAnand Krishnan <anandhkrishnan@yahoo.co.in>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NBen Collins <bcollins@ubuntu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: Stelian Pop <stelian@popies.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do not use platform_device_register_simple() as it is going away, implement
->probe() and -remove() functions so manual binding and unbinding will work
with this driver.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Stelian Pop <stelian@popies.net>
Cc: Mattia Dongili <malattia@linux.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Function prototypes belong into header files.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a hook so architectures can validate /dev/mem mmap requests.

This is analogous to validation we already perform in the read/write
paths.

The identity mapping scheme used on ia64 requires that each 16MB or
64MB granule be accessed with exactly one attribute (write-back or
uncacheable).  This avoids "attribute aliasing", which can cause a
machine check.

Sample problem scenario:
  - Machine supports VGA, so it has uncacheable (UC) MMIO at 640K-768K
  - efi_memmap_init() discards any write-back (WB) memory in the first granule
  - Application (e.g., "hwinfo") mmaps /dev/mem, offset 0
  - hwinfo receives UC mapping (the default, since memmap says "no WB here")
  - Machine check abort (on chipsets that don't support UC access to WB
    memory, e.g., sx1000)

In the scenario above, the only choices are
  - Use WB for hwinfo mmap.  Can't do this because it causes attribute
    aliasing with the UC mapping for the VGA MMIO space.
  - Use UC for hwinfo mmap.  Can't do this because the chipset may not
    support UC for that region.
  - Disallow the hwinfo mmap with -EINVAL.  That's what this patch does.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tidy up __HAVE_PHYS_MEM_ACCESS_PROT usage to make mmap_mem() easier to read.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove various things which were checking for gcc-1.x and gcc-2.x compilers.

From: Adrian Bunk <bunk@stusta.de>

    Some documentation updates and removes some code paths for gcc < 3.2.
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's one scsi driver which doesn't compile due to weird __VA_ARGS__ tricks
and the rather useful scsi/sd.c is currently getting an ICE.  None of the new
SAS code compiles, due to extensive use of anonymous unions.  The V4L guys are
very good at exploiting the gcc-2.95.x macro expansion bug (_why_ does each
driver need to implement its own debug macros?) and various people keep on
sneaking in anonymous unions, which are rather nice.

Plus anonymous unions are rather useful.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves 'fork_out:' under 'bad_fork_free:', and removes now
unneeded 'if (retval)' check.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

"extern inline" doesn't make much sense.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I couldn't find any docs explaining the contents of /sys/block/<dev>/stat,
so I wrote up the following.  I'm not completely sure it's accurate - Jens,
could you give a yea or nay on this?

In particular, the counts of read/write IOs and read/write sectors are
incremented in different places - it looks like they both increment as the
request is being finished, but I'm not completely sure of that.

Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sys_setpgid() allows to change ->pgrp of ptraced childs.

'man setpgid' does not tell anything about that, so I consider
this behaviour is a bug.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

setsid() does not work unless the calling process is a
thread_group_leader().

'man setpgid' does not tell anything about that, so I consider this
behaviour is a bug.
Signed-off-by: NOren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

setpgid(0, pgid) or setpgid(forked_child_pid, pgid) does not work unless
the calling process is a thread_group_leader().

'man setpgid' does not tell anything about that, so I consider this
behaviour is a bug.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In fork, child should recopy parent's pgrp/tty after it has tasklist_lock.
Otherwise following a setpgid() on the parent, *after* copy_signal(), the
child will own a stale pgrp (which may be reused); (eg.  if copy_mm()
sleeps a long while due to memory pressure).  Similar issue for the tty.
Signed-off-by: NOren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This creates a new function, cciss_interrupt_mode called from
cciss_pci_init.  This function determines what type of interrupt vector to
use, i.e., MSI, MSI-X, or IO-APIC.

One noticeable difference is changing the interrupt field of the controller
struct to an array of 4 unsigned ints.  The Smart Array HW is capable of
generating 4 distinct interrupts depending on the transport method in use
during operation.  These are:

#define DOORBELL_INT 0
Used to notify the contoller of configuration updates. We only use
this feature when in polling mode.

#define PERF_MODE_INT 0
Used when the controller is in Performant Mode.

#define SIMPLE_MODE_INT 2
Used when the controller is in Simple Mode (current Linux implementation).

#define MEMQ_INT_MODE 3
Not used.

When using IO-APIC interrupts these 4 lines are OR'ed together so when any
one fires an interrupt an is generated.  In MSI or MSI-X mode this hardware
OR'ing is ignored.  We must register for our interrupt depending on what
mode the controller is running.  For Linux we use SIMPLE_MODE_INT
exclusively at this time.  Please consider this for inclusion.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove global event log in the tpm bios event measurement log code that
would have caused problems when the code was run concurrently.  A log is
now allocated and attached to the seq file upon open and destroyed
appropriately.
Signed-off-by: NKylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The problem.  It is expected that /sbin/halt -p works exactly like
/sbin/halt, when the kernel does not implement power off functionality.

The kernel can do a lot of work in the reboot notifiers and in
device_shutdown before we even get to machine_power_off.  Some of that
shutdown is not safe if you are leaving the power on, and it definitely
gets in the way of using sysrq or pressing ctrl-alt-del.  Since the
shutdown happens in generic code there is no way to fix this in
architecture specific code :(

Some machines are kernel oopsing today because of this.

The simple solution is to turn LINUX_REBOOT_CMD_POWER_OFF into
LINUX_REBOOT_CMD_HALT if power_off functionality is not implemented.

This has the unfortunate side effect of disabling the power off
functionality on architectures that leave pm_power_off to null and still
implement something in machine_power_off.  And it will break the build on
some architectures that don't have a pm_power_off variable at all.

On both counts I say tough.

For architectures like alpha that don't implement the pm_power_off variable
pm_power_off is declared in linux/pm.h and it is a generic part of our
power management code, and all architectures should implement it.

For architectures like parisc that have a default power off method in
machine_power_off if pm_power_off is not implemented or fails.  It is easy
enough to set the pm_power_off variable.  And nothing bad happens there,
the machines just stop powering off.

The current semantics are impossible without a flag at the top level so we
can avoid the problem code if a power off is not implemented.  pm_power_off
is as good a flag as any with the bonus that it works without modification
on at least x86, x86_64, powerpc, and ppc today.

Andrew can you pick this up and put this in the mm tree.  Kernels that
don't compile or don't power off seem saner than kernels that oops or
panic.  Until we get the arch specific patches for the problem
architectures this probably isn't smart to push into the stable kernel.
Unfortunately I don't have the time at the moment to walk through every
architecture and make them work.  And even if I did I couldn't test it :(

From: Hirokazu Takata <takata@linux-m32r.org>

    Add pm_power_off() for build fix of arch/m32r/kernel/process.c.

From: Miklos Szeredi <miklos@szeredi.hu>

    UML build fix
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch makes posix_fadvise return ESPIPE on FIFO/pipe in order to be
fully POSIX-compliant.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on questions people have asked me.  Repeatedly.
Signed-off-by: NRob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch forces RCU torture threads off various CPUs in the system
allowing them to become idle and go tickless.  Meant to test support for
such tickless idle CPU in RCU.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kernels that have had Windows drivers loaded into them are undebuggable.
I've wasted a number of hours chasing bugs filed in Fedora bugzilla only to
find out much later that the user had used such 'helpers', and their
problems were unreproducable without them loaded.
Acked-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I found that blkp field was not used in kernel tree.

As most of the times NR_CPUS is a power of two and kmalloc() memory blocks
too, this extra field basically doubles the memory space allocated in
__alloc_percpu() to store the 'struct percpu_data'

(for example, if NR_CPUS=8 on i386, kmalloc(4*8+4) returns a 64 bytes block
instead of a 32 bytes block after this patch)
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch inlines the single user of struct super_block field
s_old_blocksize and removes the field.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Minor update to Documentation/applying-patches.txt
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

linux/delay.h included twice
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mmap() returns -EINVAL if given a zero length, and thus elf_map() in
binfmt_elf.c does likewise if it attempts to map a (page-aligned) ELF
segment with zero filesize.  Such a situation never arises with the default
linker scripts, but there's nothing inherently wrong with zero-filesize
(but non-zero memsize) ELF segments.  Custom linker scripts can generate
them, and the kernel should be able to map them; this patch makes it so.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The parameter to put_cpu_var() is unreferenced by the implementation, and
the compiler doesn't try to comprehend comments, so this wouldn't cause any
problem, but if bugged me enough to post a fix :-)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some long time ago, dentry struct was carefully tuned so that on 32 bits
UP, sizeof(struct dentry) was exactly 128, ie a power of 2, and a multiple
of memory cache lines.

Then RCU was added and dentry struct enlarged by two pointers, with nice
results for SMP, but not so good on UP, because breaking the above tuning
(128 + 8 = 136 bytes)

This patch reverts this unwanted side effect, by using an union (d_u),
where d_rcu and d_child are placed so that these two fields can share their
memory needs.

At the time d_free() is called (and d_rcu is really used), d_child is known
to be empty and not touched by the dentry freeing.

Lockless lookups only access d_name, d_parent, d_lock, d_op, d_flags (so
the previous content of d_child is not needed if said dentry was unhashed
but still accessed by a CPU because of RCU constraints)

As dentry cache easily contains millions of entries, a size reduction is
worth the extra complexity of the ugly C union.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Paul Jackson <pj@sgi.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It would be helpful if the kernel did not silently stop parsing
nfs options, but instead warned about any he does not recognize. The
attached patch adds one printk to do just that.

It took me a couple of hours to find my configuration mistake.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The only user of send_sigio_to_task() already holds tasklist_lock, so it is
better not to send the signal via send_group_sig_info() (which takes
tasklist recursively) but use group_send_sig_info().

The same change in send_sigurg()->send_sigurg_to_task().
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes unneeded sig->curr_target recalculation under 'if
(atomic_dec_and_test(&sig->count))' in __exit_signal().

When sig->count == 0 the signal can't be sent to this task and
next_thread(tsk) == tsk anyway.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

uniq -d MAINTAINERS
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are places in the resize code in which EXT3_SB() macro is used after
an statement like sbi = EXT3_SB(sb) is done.  Inside the same function,
both sbi and EXT3_SB() are used to reference the super block Altough it is
not wrong, keeping it coherent increases legibility, IMHO.
Signed-off-by: NGlauber de Oliveira Costa <glommer@br.ibm.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the trailing newlines in calls to ext3_warning().  This function
already adds a trailing newline to the end of messages.
Signed-off-by: NGlauber de Oliveira Costa <glommer@br.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>