Merge tag 'renesas-cleanup2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Second Round of Renesas ARM Based SoC Cleanup for v4.3

* Silence APMU build warnings

* tag 'renesas-cleanup2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: apmu: silence build warnings
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.3/legacy-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Merge "drop few more legacy boards for v4.3" from Tony Lindgren:

Drop more omap3 legacy board-*.c files for v4.3. This time we're
dropping the board files for omap3logic and omap3pandora.

The reason for dropping these now rather than later is that now
we can simply revert the patches in case of unexpected issues as
we are not dropping any platform data at this point.

This leaves us with only the following board-*.c files:

BOARD                   REASON NEEDED
board-ldp.c             Still used in RMKs boot test system
board-rx51-*.c          Needs /proc/atags support for user space

Once we have the n900 legacy user space issues sorted out for
/proc/atags and system_rev, we can drop the remaining two
board-*.c files. And then one merge window after that we can
drop the legacy booting support assuming no unexpected issues
are found.

* tag 'omap-for-v4.3/legacy-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove legacy booting support for Pandora
  ARM: OMAP2+: Remove legacy booting support for LogicPD Torpedo
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'ep93xx-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup

Merge "EP93xx cleanups for v4.3" from Linus Walleij:

EP93xx cleanup and completing developments. This switches
EP93xx to generic time and brings in a few out-of-tree small
patches that were stalled for ages.

It also removes the need for memory config options and instead moves over to
using PATCH_PHYS_VIRT.

* tag 'ep93xx-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: ep93xx: simone: enable DMA on the SPI host
  ARM: ep93xx: vision_ep9307: add audio support
  ARM: ep93xx: vision_ep9307: enable DMA for SPI
  ARM: ep93xx: toss the device ID into the entropy pool
  ARM: ep93xx: remove memory configuration options
  ARM: ep93xx: update comment on timer usage
  ARM: ep93xx: switch clockevent to timer 3
  ARM: ep93xx: use non-raw accessors for timer
  ARM: ep93xx: switch to GENERIC_CLOCKEVENTS
  ARM: ep93xx: move timer to its own file
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge "Broadcom SoC changes for 4.3 (part 1)" from Florian Fainelli:

This pull request contains two fixes for the Broadcom BCM63xx SMP code:

- Sudeep removes an invalid use of cpu_logical_map() which turned to be a no-op
  since we always boot from physical CPU 0 = logical CPU 0

- Florian removes the custom secondary_startup function and replaces it with
  the generic one

* tag 'arm-soc/for-4.3/soc' of http://github.com/broadcom/stblinux:
  ARM: BCM63xx: Remove custom secondary_startup function
  ARM: BCM63xx: fix parameter to of_get_cpu_node in bcm63138_smp_boot_secondary
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge "ARM: mvebu: cleanup changes for v4.3" from Gregory Clement:

mvebu cleanup changes for v4.3 (part #1)

- Use vsprintf %pM extension on orion5x board to format mac address
- Add missing newline at end of messages on pr_warn when CPU Idle on
  Armada 38x is disabled

* tag 'mvebu-cleanup-4.3-1' of git://git.infradead.org/linux-mvebu:
  ARM: orion5x: Use vsprintf %pM extension
  ARM: mvebu: add missing newline at end of messages
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge branch 'ARM/clkevt/set-state-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux into next/cleanup

Merge "ARM: clockevents: Migrate to 'set-state' callbacks" from Viresh Kumar:

This series migrates ARM clockevent drivers (present in arch/arm/
directory), to the new set-state interface. This would enable these
drivers to use new states (like: ONESHOT_STOPPED, etc.) of a clockevent
device (if required), as the set-mode interface is marked obsolete now
and wouldn't be expanded to handle new states.

* 'ARM/clkevt/set-state-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
  ARM/orion/time: Migrate to new 'set-state' interface
  ARM/iop/time: Migrate to new 'set-state' interface
  ARM/w90x900/time: Migrate to new 'set-state' interface
  ARM/SPEAr/time: Migrate to new 'set-state' interface
  ARM/omap2/timer: Migrate to new 'set-state' interface
  ARM/omap1/timer32: Migrate to new 'set-state' interface
  ARM/omap1/time: Migrate to new 'set-state' interface
  ARM/netx/time: Migrate to new 'set-state' interface
  ARM/mmp/time: Migrate to new 'set-state' interface
  ARM/lpc32xx/timer: Migrate to new 'set-state' interface
  ARM/ks8695/time: Migrate to new 'set-state' interface
  ARM/ixp4xx/timer: Migrate to new 'set-state' interface
  ARM/imx/epit: Migrate to new 'set-state' interface
  ARM/gemini/time: Migrate to new 'set-state' interface
  ARM/dc21285-timer: Migrate to new 'set-state' interface
  ARM/davinci/time: Migrate to new 'set-state' interface
  ARM/cns3xxx/timer: Migrate to new 'set-state' interface
  ARM/smp_twd: Migrate to new 'set-state' interface
Signed-off-by: NOlof Johansson <olof@lixom.net>

The SPI host on the SIM.ONE is used for the MMC/SD card and
will badly need this turbo boost.
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add I2S audio support to the vision_ep9307 system.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Enable the 'use_dma' flag in the SPI platform data to improve the speed
of the mmc_spi driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

It doesn't hurt to add this random stuff into the entropy pool
as is custom to do with device-unique numbers.
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The ARM_PATCH_PHYS_VIRT option makes the ep93xx memory configuration
options obsolete.

This allows support for all the ep93xx variations to be built into a
single kernel.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When refactoring the EP93xx timer some of the documentation
git out of date. Update it.
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Migrate orion driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate iop driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate w90x900 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate SPEAr driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also kill the unnecessary forward declaration of set-mode routine by
moving 'struct clock_event_device clkevt' towards the bottom of the file.

Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate omap2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate omap timer32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate omap driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate netx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We aren't writing zero twice on the control register for shutdown or
resume state now.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate mmp driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in set_mode(RESUME) except of
local_irq_{save|restore}(), which isn't required and so ->tick_resume
isn't implemented.

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate lpc32xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate ks8695 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

There is nothing to be done for oneshot or shutdown states and so are
not implemented.
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate ixp4xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

NOTE: ixp4xx_set_{oneshot|periodic} don't perform read operation on
'IXP4XX_OSRT1' register anymore.

Cc: Imre Kaloz <kaloz@openwrt.org>
Acked-by: NKrzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate imx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also drop 'clockevent_mode': It was caching the last state of the
clockevent device. The same behavior can be achieved by using
clockevents state helpers. These helpers are only required for oneshot
mode as shutdown/resume wouldn't be done twice by the core.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate gemini driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: NHans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate footbridge driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate davinci driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in set_mode(RESUME) and so .tick_resume()
isn't implemented.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate cns3xxx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

NOTE: We don't read TIMER1_2_CONTROL_OFFSET register on shutdown
anymore.
Acked-by: NKrzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

Migrate smp_twd driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Cc: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Merge tag 'renesas-pm-domain-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Merge "Renesas ARM Based SoC PM Domain Updates for v4.3" from Simon Horman:

* Make rcar_sysc_ch const for r8a779[09] SoCs
* Get rid of on_off_fn() function pointer
* Use BIT() macro instead of open coding
* Make struct rcar_sysc_ch * parameters const
* Break infinite loop
* Shrink rcar_sysc_ch size
* Improve documentation

* tag 'renesas-pm-domain-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Make struct rcar_sysc_ch const
  ARM: shmobile: r8a7779: Make struct rcar_sysc_ch const
  ARM: shmobile: R-Car: Get rid of on_off_fn() function pointer
  ARM: shmobile: R-Car: Use BIT() macro instead of open coding
  ARM: shmobile: R-Car: Make struct rcar_sysc_ch * parameters const
  ARM: shmobile: R-Car: Break infinite loop
  ARM: shmobile: R-Car: Shrink rcar_sysc_ch size
  ARM: shmobile: R-Car: Improve documentation
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Merge "Renesas ARM Based SoC Cleanup for v4.3" from Simon Horman:

* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
  as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
  r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect

* tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only
  ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set
  ARM: shmobile: Remove obsolete zboot support
  ARM: shmobile: R-Mobile: Remove legacy PM Domain code
  ARM: shmobile: Remove unused dma-register.h
  ARM: shmobile: Remove legacy SoC code for R-Mobile A1
  ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds
  ARM: shmobile: Remove legacy armadillo800eva_defconfig
  ARM: shmobile: Remove legacy board code for Armadillo-800 EVA
  ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5
  ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds
  ARM: shmobile: Remove legacy kzm9g_defconfig
  ARM: shmobile: Remove legacy board code for KZM-A9-GT
  ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag
  ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding
  ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file
Signed-off-by: NOlof Johansson <olof@lixom.net>

With shmobile_defconfig but SMP=n && SUSPEND=n, I get:

arch/arm/mach-shmobile/platsmp-apmu.c:49:12: warning: 'apmu_power_off' defined but not used [-Wunused-function]
arch/arm/mach-shmobile/platsmp-apmu.c:70:12: warning: 'apmu_wrap' defined but not used [-Wunused-function]

Annotate those functions like the functions around it.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Cc: Tim Nordell <tim.nordell@logicpd.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This reverts commit dec4f799.

Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:

        crtc_state = state->base.state ?
                intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;

So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.

There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull VFS fixes from Al Viro:
 "Fixes for this cycle regression in overlayfs and a couple of
  long-standing (== all the way back to 2.6.12, at least) bugs"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  freeing unlinked file indefinitely delayed
  fix a braino in ovl_d_select_inode()
  9p: don't leave a half-initialized inode sitting around

Pull MIPS fixes from Ralf Baechle:
 "A fair number of 4.2 fixes also because Markos opened the flood gates.

   - Patch up the math used calculate the location for the page bitmap.

   - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ
     around was causing issues on non-Malta platforms, so move the code
     to a Malta specific location.

   - A spelling fix replicated through several files.

   - Fix to the emulation of an R2 instruction for R6 cores.

   - Fix the JR emulation for R6.

   - Further patching of mindless 64 bit issues.

   - Ensure the kernel won't crash on CPUs with L2 caches with >= 8
     ways.

   - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels.

   - Fix cache flushing for multithreaded cores.

   - A build fix"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: O32: Use compat_sys_getsockopt.
  MIPS: c-r4k: Extend way_string array
  MIPS: Pistachio: Support CDMM & Fast Debug Channel
  MIPS: Malta: Make GIC FDC IRQ workaround Malta specific
  MIPS: c-r4k: Fix cache flushing for MT cores
  Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit"
  MIPS: cps-vec: Use macros for various arithmetics and memory operations
  MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0
  MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit
  MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2
  MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA
  MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting
  MIPS: Fix erroneous JR emulation for MIPS R6
  MIPS: Fix branch emulation for BLTC and BGEC instructions
  MIPS: kernel: traps: Fix broken indentation
  MIPS: bootmem: Don't use memory holes for page bitmap
  MIPS: O32: Do not handle require 32 bytes from the stack to be readable.
  MIPS, CPUFREQ: Fix spelling of Institute.
  MIPS: Lemote 2F: Fix build caused by recent mass rename.

Pull x86 fixes from Thomas Gleixner:

 - the high latency PIT detection fix, which slipped through the cracks
   for rc1

 - a regression fix for the early printk mechanism

 - the x86 part to plug irq/vector related hotplug races

 - move the allocation of the espfix pages on cpu hotplug to non atomic
   context.  The current code triggers a might_sleep() warning.

 - a series of KASAN fixes addressing boot crashes and usability

 - a trivial typo fix for Kconfig help text

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text
  x86/irq: Retrieve irq data after locking irq_desc
  x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable()
  x86/irq: Plug irq vector hotplug race
  x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8'
  x86/espfix: Init espfix on the boot CPU side
  x86/espfix: Add 'cpu' parameter to init_espfix_ap()
  x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig
  x86/kasan: Add message about KASAN being initialized
  x86/kasan: Fix boot crash on AMD processors
  x86/kasan: Flush TLBs after switching CR3
  x86/kasan: Fix KASAN shadow region page tables
  x86/init: Clear 'init_level4_pgt' earlier
  x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()