Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Now that we have module alias macros for generic netlink families, lets use
those to mark modules with the appropriate family names for loading
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Generic netlink searches for -type- formatted aliases when requesting a module to
fulfill a protocol request (i.e. net-pf-16-proto-16-type-<x>, where x is a type
value).  However generic netlink protocols have no well defined type numbers,
they have string names.  Modify genl_ctrl_getfamily to request an alias in the
format net-pf-16-proto-16-family-<x> instead, where x is a generic string, and
add a macro that builds on the previously added MODULE_ALIAS_NET_PF_PROTO_NAME
macro to allow modules to specifify those generic strings.

Note, l2tp previously hacked together an net-pf-16-proto-16-type-l2tp alias
using the MODULE_ALIAS macro, with these updates we can convert that to use the
PROTO_NAME macro.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: James Chapman <jchapman@katalix.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MODULE_ALAIS_NET_PF macro set is missing a variant that allows for the
appending of an arbitrary string to the net-pf-<x>-proto-<y> base.  while
MODULE_ALIAS_NET_PF_PROTO_NAME_TYPE allows an appending of a numerical type, we
need to be able to append a generic string to support generic netlink families
that have neither a fix numberical protocol nor type number
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

so if mdiobus_alloc fails, the errorpath doesnt do a netif_napi_del and also
doesn't set the priv data of the driver to NULL.

at the driver unload stage the driver doesn't remove the NAPI context, and
doesnt' set the priv data to NULL, and also doesn't call the pci_iounmap.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the calls after the pci_enable_device may fail, and will error out with out
disabling it. disable the device at error paths.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the beginning of __skb_cow, headroom gets set to a minimum of
NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not
cloned and the headroom is just below NET_SKB_PAD, but still more than the
amount requested by the caller.
This was showing up frequently in my tests on VLAN tx, where
vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN).

Locally generated packets should have enough headroom, and for forward
paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to
add any extra space here.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When Receive Descriptor Empty happens, rxdesc pointer of the driver
and actual next descriptor of the controller may be mismatch.
This patch fixes it.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

asix driver drops 8021Q full size frames because it doesn't take into
account VLAN header size.

Tested on AX88772 adapter.
Signed-off-by: NEric Dumazet <edumazet@google.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Allan Chou <allan@asix.com.tw>
CC: Trond Wuellner <trond@chromium.org>
CC: Grant Grundler <grundler@chromium.org>
CC: Paul Stewart <pstew@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS code assumes that the struct ib_device dma_device member, which is a
pointer, points to a struct device embedded in a struct pci_dev.

This is not the case for ehca, for example, which is a OF driver, and
makes dma_device point to a struct device embedded in a struct
platform_device.

This will make the system crash when rds_rdma is loaded in a system
with ehca, since it will try to access the bus member of a non-existent
struct pci_dev.

The only reason rds_rdma uses the struct pci_dev is to get the NUMA node
the device is attached to. Using dev_to_node for that is much better,
since it won't assume which bus the infiniband is attached to.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: dledford@redhat.com
Cc: Jes.Sorensen@redhat.com
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An application may call connect() to disconnect a socket using an
address with family AF_UNSPEC. The L2TP IP sockets were not handling
this case when the socket is not bound and an attempt to connect()
using AF_UNSPEC in such cases would result in an oops. This patch
addresses the problem by protecting the sk_prot->disconnect() call
against trying to unhash the socket before it is bound.

The L2TP IPv4 and IPv6 sockets have the same problem. Both are fixed
by this patch.

The patch also adds more checks that the sockaddr supplied to bind()
and connect() calls is valid.

 RIP: 0010:[<ffffffff82e133b0>]  [<ffffffff82e133b0>] inet_unhash+0x50/0xd0
 RSP: 0018:ffff88001989be28  EFLAGS: 00010293
 Stack:
  ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249
  ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000
  0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639
 Call Trace:
 [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290
 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80
 [<ffffffff82d012fc>] sys_connect+0x9c/0x100
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

WLAN_STA_BLOCK_BA is set while suspending but doesn't get cleared
when resuming in case of wowlan. This causes further ADDBA requests
received to be rejected. Fix it by clearing it in the wowlan path
as well.
Signed-off-by: NEyal Shapira <eyal@wizery.com>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

commit c21eebb5
"wl12xx: add RX filters ACX commands" breaks the build
when CONFIG_PM isn't defined:

ERROR: "wl1271_rx_filter_get_fields_size"
[drivers/net/wireless/ti/wlcore/wlcore.ko] undefined!
ERROR: "wl1271_rx_filter_flatten_fields"
[drivers/net/wireless/ti/wlcore/wlcore.ko] undefined!

code in drivers/net/wireless/ti/wlcore/acx.c is using these
functions unconditionally while they are #ifdefed CONFIG_PM.
Fix it by ifdefing all relevant RX filters code with CONFIG_PM.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NEyal Shapira <eyal@wizery.com>
Acked-by: NLuciano Coelho <coelho@ti.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NClaudio Pisa <claudio.pisa@uniroma2.it>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

On AR933x, the internal regulator settings need to be applied before the
PLL init to avoid stability issues.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

"> Can you provide more information about the issues with high power devices?
Tx being flakey and Rx not working at all."
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ath_tx_setup_buffer() can fail if there is no ath_buf left, or if mapping DMA
failed. In this case it frees the skb passed to it.
If ath_tx_setup_buffer is called from ath_tx_form_aggr, the skb is still
linked into the tid buffer list and must be dequeued before being released.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It has been found that active Rx can interfere with stopping tx DMA, which
could result in at least parts of those "Failed to stop Tx DMA!" messages.
Stopping rx before tx should prevent that.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NFelix Fietkau <nbd@openwrt.org>

Since commit ad0081e4
"ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed"
the fragment of packets is incorrect.
because tunnel mode needs IPsec headers and trailer for all fragments,
while on transport mode it is sufficient to add the headers to the
first fragment and the trailer to the last.

so modify mtu and maxfraglen base on ipsec mode and if fragment is first
or last.

with my test,it work well(every fragment's size is the mtu)
and does not trigger slow fragment path.

Changes from v1:
	though optimization, mtu_prev and maxfraglen_prev can be delete.
	replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL.
	add fuction ip6_append_data_mtu to make codes clearer.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Corrects the function that determines the esp payload size. The calculations
done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for
certain mtu values and suboptimal frames for others.

According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(),
net_header_len must be taken into account before doing the alignment
calculation.
Signed-off-by: NBenjamin Poirier <bpoirier@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mac80211 tries to verify the existence of the current AP by
probing or sending a NULL frame in function
ieee80211_mgd_probe_ap_send. It 1st sends a null frame to the AP,
increments probe_send_count and waits for the ACK to the NULL
frame for a finite duration of time. At times, it happens that by
the time mac80211 gets to increment probe_send_count, the ACK for
the NULL frame transmitted has already been processed. This leads
to a race condition where mac80211 times out waiting for the ACK
for the NULL frame causing unnecessary disconnection with the AP.
Signed-off-by: NSoumik Das <soumik.das@stericsson.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The firmware is more than 300KB big and you should not use kmalloc for
such big allocations. This allocation with kmalloc failed on my mips
based device (BCM47186).
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Acked-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If "buf[0]" is 255 then "len" gets set to 0.  The call to
"crc_ccitt(0xffff, buf, len - 2);" casts the "len - 2" to a high
positive number which is ugly.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This driver disables interrupt just after requesting it and enables it
later, after interface is up. However currently there is a time window
between request_irq() and disable_irq() where if interrupt arrives, the
driver oopses because it's not yet ready to process it. This can be
reproduced by inserting the module, associating and removing the module
multiple times.

Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq().

Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If drv->op_mode is NULL after trying to init the
opmode, we go to the wrong label. Fix this, and
clean up the code a bit.
Reviewed-by: NGregory Greenman <gregory.greenman@intel.com>
Reviewed-by: NGuy Cohen <guy.cohen@intel.com>
Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When adding a station fails in
iwl_restore_stations, the driver treats it
like a successful station add and sends a
link quality command, when it it shouldn't.

This patch fixes one of the potential
sources for kernel warnings like this one:

WARNING: at drivers/net/wireless/iwlwifi/iwl-agn-sta.c:905 iwl_send_lq_cmd+0x130/0x217 [iwlwifi]()
Hardware name: 3323A2G
Modules linked in: ...
Pid: 17359, comm: kworker/u:2 Tainted: G           O 3.3.0-wl+ #1
Call Trace:
 [<ffffffff81039620>] warn_slowpath_common+0x7e/0x96
 [<ffffffff8103964d>] warn_slowpath_null+0x15/0x17
 [<ffffffffa02a9f0b>] iwl_send_lq_cmd+0x130/0x217 [iwlwifi]
 [<ffffffffa02aa1fb>] iwl_restore_stations+0x209/0x289 [iwlwifi]
 [<ffffffffa02b07c2>] iwlagn_commit_rxon+0x602/0x7bd [iwlwifi]
 [<ffffffffa02b111f>] iwlagn_bss_info_changed+0x247/0x31a [iwlwifi]
 [<ffffffffa0861437>] ieee80211_bss_info_change_notify+0x1a5/0x1ba [mac80211]
 [<ffffffffa088afad>] ieee80211_destroy_auth_data+0x4b/0x70 [mac80211]
 [<ffffffffa088df26>] ieee80211_sta_work+0xb5/0x954 [mac80211]
Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Reviewed-by: NWey-Yi W Guy <wey-yi.w.guy@intel.com>
Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The ucode16 option is still very much work in
progress, so there's no need to ask any users
about it. Remove the option and code for now,
we'll put it back when it's actually working.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Shadow registers in the device are meant to
allow the driver to update certain device
registers without needing to wake up all
components of the device. However, using
this feature in the device causes
communication between the driver and the
device to become unreliable, resulting in
host command timeouts.

Disable this feature by default till a fix is
available for the bug.

Cc: stable@vger.kernel.org #2.6.38+
Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The logic that allows to have a short TFD queue was completely wrong.
We do maintain 256 Transmit Frame Descriptors, but they point to
recycled buffers. We used to attach and de-attach different TFDs for
the same buffer and it worked since they pointed to the same buffer.

Also zero the number of BDs after unmapping a TFD. This seems not
necessary since we don't reclaim the same TFD twice, but I like
housekeeping.

This patch solves this warning:

[ 6427.079855] WARNING: at lib/dma-debug.c:866 check_unmap+0x727/0x7a0()
[ 6427.079859] Hardware name: Latitude E6410
[ 6427.079865] iwlwifi 0000:02:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000296d393c] [size=8 bytes]
[ 6427.079870] Modules linked in: ...
[ 6427.079950] Pid: 6613, comm: ifconfig Tainted: G           O 3.3.3 #5
[ 6427.079954] Call Trace:
[ 6427.079963]  [<c10337a2>] warn_slowpath_common+0x72/0xa0
[ 6427.079982]  [<c1033873>] warn_slowpath_fmt+0x33/0x40
[ 6427.079988]  [<c12dcb77>] check_unmap+0x727/0x7a0
[ 6427.079995]  [<c12dcdaa>] debug_dma_unmap_page+0x5a/0x80
[ 6427.080024]  [<fe2312ac>] iwlagn_unmap_tfd+0x12c/0x180 [iwlwifi]
[ 6427.080048]  [<fe231349>] iwlagn_txq_free_tfd+0x49/0xb0 [iwlwifi]
[ 6427.080071]  [<fe228e37>] iwl_tx_queue_unmap+0x67/0x90 [iwlwifi]
[ 6427.080095]  [<fe22d221>] iwl_trans_pcie_stop_device+0x341/0x7b0 [iwlwifi]
[ 6427.080113]  [<fe204b0e>] iwl_down+0x17e/0x260 [iwlwifi]
[ 6427.080132]  [<fe20efec>] iwlagn_mac_stop+0x6c/0xf0 [iwlwifi]
[ 6427.080168]  [<fd8480ce>] ieee80211_stop_device+0x5e/0x190 [mac80211]
[ 6427.080198]  [<fd833208>] ieee80211_do_stop+0x288/0x620 [mac80211]
[ 6427.080243]  [<fd8335b7>] ieee80211_stop+0x17/0x20 [mac80211]
[ 6427.080250]  [<c148dac1>] __dev_close_many+0x81/0xd0
[ 6427.080270]  [<c148db3d>] __dev_close+0x2d/0x50
[ 6427.080276]  [<c148d152>] __dev_change_flags+0x82/0x150
[ 6427.080282]  [<c148e3e3>] dev_change_flags+0x23/0x60
[ 6427.080289]  [<c14f6320>] devinet_ioctl+0x6a0/0x770
[ 6427.080296]  [<c14f8705>] inet_ioctl+0x95/0xb0
[ 6427.080304]  [<c147a0f0>] sock_ioctl+0x70/0x270

Cc: stable@vger.kernel.org
Reported-by: NAntonio Quartulli <ordex@autistici.org>
Tested-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: NWey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When BT traffic load changes from its
previous state, a new LQ command needs to be
sent down to the firmware. This needs to
be done only once per change. The state
variable that keeps track of this change is
last_bt_traffic_load. However, it was not
being updated when the change had been
handled. Not updating this variable was
causing a flood of advanced BT config
commands to be sent to the firmware. Fix
this.

Cc: stable@vger.kernel.org #2.6.38+
Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

No one uses this on current kernels anymore.

Let it be known it's going to be removed eventually.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calculating the number of slots required for a packet header, the code
was reserving too many slots if the header crossed a page boundary. Since
netbk_gop_skb copies the header to the start of the page, the count of
slots required for the header should be based solely on the header size.

This problem is easy to reproduce if a VIF is bridged to a USB 3G modem
device as the skb->data value always starts near the end of the first page.
Signed-off-by: NSimon Graham <simon.graham@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA support has finally made its way to the top of the TODO list, having
realised that a Geode using MMIO can't keep up with two ADSL2+ lines
each running at 21Mb/s.

This patch fixes a couple of bugs in the DMA support in the driver, so
once the corresponding FPGA update is complete and tested everything
should work properly.

We weren't storing the currently-transmitting skb, so we were never
unmapping it and never freeing/popping it when the TX was done.
And the addition of pci_set_master() is fairly self-explanatory.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After about two decades, I am giving up on cyberus.
Nabwaga Manyanga.
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some additional Gobi3K IDs found in the BSD/GPL licensed
out-of-tree GobiNet driver from Sierra Wireless.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull main drm updates from Dave Airlie:
 "This is the main merge window request for the drm.

  It's big, but jam packed will lots of features and of course 0
  regressions.  (okay maybe there'll be one).

  Highlights:

   - new KMS drivers for server GPU chipsets: ast, mgag200 and cirrus
     (qemu only).  These drivers use the generic modesetting drivers.

   - initial prime/dma-buf support for i915, nouveau, radeon, udl and
     exynos

   - switcheroo audio support: so GPUs with HDMI can turn off the sound
     driver without crashing stuff.

   - There are some patches drifting outside drivers/gpu into x86 and
     EFI for better handling of multiple video adapters in Apple Macs,
     they've got correct acks except one trivial fixup.

   - Core:
	edid parser has better DMT and reduced blanking support,
	crtc properties,
	plane properties,

   - Drivers:
	exynos: add 2D core accel support, prime support, hdmi features
	intel: more Haswell support, initial Valleyview support, more
	    hdmi infoframe fixes, update MAINTAINERS for Daniel, lots of
	    cleanups and fixes
	radeon: more HDMI audio support, improved GPU lockup recovery
	    support, remove nested mutexes, less memory copying on PCIE, fix
	    bus master enable race (kexec), improved fence handling
	gma500: cleanups, 1080p support, acpi fixes
	nouveau: better nva3 memory reclocking, kepler accel (needs
	    external firmware rip), async buffer moves on nv84+ hw.

  I've some more dma-buf patches that rely on the dma-buf merge for vmap
  stuff, and I've a few fixes building up, but I'd decided I'd better
  get rid of the main pull sooner rather than later, so the audio guys
  are also unblocked."

Fix up trivial conflict due to some duplicated changes in
drivers/gpu/drm/i915/intel_ringbuffer.c

* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (605 commits)
  drm/nouveau/nvd9: Fix GPIO initialisation sequence.
  drm/nouveau: Unregister switcheroo client on exit
  drm/nouveau: Check dsm on switcheroo unregister
  drm/nouveau: fix a minor annoyance in an output string
  drm/nouveau: turn a BUG into a WARN
  drm/nv50: decode PGRAPH DATA_ERROR = 0x24
  drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks
  drm/nvd9/copy: initialise copy engine, seems to work like nvc0
  drm/nvc0/ttm: use copy engines for async buffer moves
  drm/nva3/ttm: use copy engine for async buffer moves
  drm/nv98/ttm: add in a (disabled) crypto engine buffer copy method
  drm/nv84/ttm: use crypto engine for async buffer copies
  drm/nouveau/ttm: untangle code to support accelerated buffer moves
  drm/nouveau/fbcon: use fence for sync, rather than notifier
  drm/nv98/crypt: non-stub implementation of the engine hooks
  drm/nouveau/fifo: turn all fifo modules into engine modules
  drm/nv50/graph: remove ability to do interrupt-driven context switching
  drm/nv50: remove manual context unload on context destruction
  drm/nv50: remove execution engine context saves on suspend
  drm/nv50/fifo: use hardware channel kickoff functionality
  ...

Pull more networking updates from David Miller:
 "Ok, everything from here on out will be bug fixes."

1) One final sync of wireless and bluetooth stuff from John Linville.
   These changes have all been in his tree for more than a week, and
   therefore have had the necessary -next exposure.  John was just away
   on a trip and didn't have a change to send the pull request until a
   day or two ago.

2) Put back some defines in user exposed header file areas that were
   removed during the tokenring purge.  From Stephen Hemminger and Paul
   Gortmaker.

3) A bug fix for UDP hash table allocation got lost in the pile due to
   one of those "you got it..  no I've got it.." situations.  :-)

   From Tim Bird.

4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll
   try to coalesce overlapping frags and crash.  Fix from Eric Dumazet.

5) RCU routing table lookups can race with free_fib_info(), causing
   crashes when we deref the device pointers in the route.  Fix by
   releasing the net device in the RCU callback.  From Yanmin Zhang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits)
  tcp: take care of overlaps in tcp_try_coalesce()
  ipv4: fix the rcu race between free_fib_info and ip_route_output_slow
  mm: add a low limit to alloc_large_system_hash
  ipx: restore token ring define to include/linux/ipx.h
  if: restore token ring ARP type to header
  xen: do not disable netfront in dom0
  phy/micrel: Fix ID of KSZ9021
  mISDN: Add X-Tensions USB ISDN TA XC-525
  gianfar:don't add FCB length to hard_header_len
  Bluetooth: Report proper error number in disconnection
  Bluetooth: Create flags for bt_sk()
  Bluetooth: report the right security level in getsockopt
  Bluetooth: Lock the L2CAP channel when sending
  Bluetooth: Restore locking semantics when looking up L2CAP channels
  Bluetooth: Fix a redundant and problematic incoming MTU check
  Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
  Bluetooth: Fix EIR data generation for mgmt_device_found
  Bluetooth: Fix Inquiry with RSSI event mask
  Bluetooth: improve readability of l2cap_seq_list code
  Bluetooth: Fix skb length calculation
  ...

Pull user-space probe instrumentation from Ingo Molnar:
 "The uprobes code originates from SystemTap and has been used for years
  in Fedora and RHEL kernels.  This version is much rewritten, reviews
  from PeterZ, Oleg and myself shaped the end result.

  This tree includes uprobes support in 'perf probe' - but SystemTap
  (and other tools) can take advantage of user probe points as well.

  Sample usage of uprobes via perf, for example to profile malloc()
  calls without modifying user-space binaries.

  First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.

  If you don't know which function you want to probe you can pick one
  from 'perf top' or can get a list all functions that can be probed
  within libc (binaries can be specified as well):

	$ perf probe -F -x /lib/libc.so.6

  To probe libc's malloc():

	$ perf probe -x /lib64/libc.so.6 malloc
	Added new event:
	probe_libc:malloc    (on 0x7eac0)

  You can now use it in all perf tools, such as:

	perf record -e probe_libc:malloc -aR sleep 1

  Make use of it to create a call graph (as the flat profile is going to
  look very boring):

	$ perf record -e probe_libc:malloc -gR make
	[ perf record: Woken up 173 times to write data ]
	[ perf record: Captured and wrote 44.190 MB perf.data (~1930712

	$ perf report | less

	  32.03%            git  libc-2.15.so   [.] malloc
	                    |
	                    --- malloc

	  29.49%            cc1  libc-2.15.so   [.] malloc
	                    |
	                    --- malloc
	                       |
	                       |--0.95%-- 0x208eb1000000000
	                       |
	                       |--0.63%-- htab_traverse_noresize

	  11.04%             as  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |

	   7.15%             ld  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |

	   5.07%             sh  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |
	   4.99%  python-config  libc-2.15.so   [.] malloc
	          |
	          --- malloc
	             |
	   4.54%           make  libc-2.15.so   [.] malloc
	                   |
	                   --- malloc
	                      |
	                      |--7.34%-- glob
	                      |          |
	                      |          |--93.18%-- 0x41588f
	                      |          |
	                      |           --6.82%-- glob
	                      |                     0x41588f

	   ...

  Or:

	$ perf report -g flat | less

	# Overhead        Command  Shared Object      Symbol
	# ........  .............  .............  ..........
	#
	  32.03%            git  libc-2.15.so   [.] malloc
	          27.19%
	              malloc

	  29.49%            cc1  libc-2.15.so   [.] malloc
	          24.77%
	              malloc

	  11.04%             as  libc-2.15.so   [.] malloc
	          11.02%
	              malloc

	   7.15%             ld  libc-2.15.so   [.] malloc
	           6.57%
	              malloc

	 ...

  The core uprobes design is fairly straightforward: uprobes probe
  points register themselves at (inode:offset) addresses of
  libraries/binaries, after which all existing (or new) vmas that map
  that address will have a software breakpoint injected at that address.
  vmas are COW-ed to preserve original content.  The probe points are
  kept in an rbtree.

  If user-space executes the probed inode:offset instruction address
  then an event is generated which can be recovered from the regular
  perf event channels and mmap-ed ring-buffer.

  Multiple probes at the same address are supported, they create a
  dynamic callback list of event consumers.

  The basic model is further complicated by the XOL speedup: the
  original instruction that is probed is copied (in an architecture
  specific fashion) and executed out of line when the probe triggers.
  The XOL area is a single vma per process, with a fixed number of
  entries (which limits probe execution parallelism).

  The API: uprobes are installed/removed via
  /sys/kernel/debug/tracing/uprobe_events, the API is integrated to
  align with the kprobes interface as much as possible, but is separate
  to it.

  Injecting a probe point is privileged operation, which can be relaxed
  by setting perf_paranoid to -1.

  You can use multiple probes as well and mix them with kprobes and
  regular PMU events or tracepoints, when instrumenting a task."

Fix up trivial conflicts in mm/memory.c due to previous cleanup of
unmap_single_vma().

* 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf probe: Detect probe target when m/x options are absent
  perf probe: Provide perf interface for uprobes
  tracing: Fix kconfig warning due to a typo
  tracing: Provide trace events interface for uprobes
  tracing: Extract out common code for kprobes/uprobes trace events
  tracing: Modify is_delete, is_return from int to bool
  uprobes/core: Decrement uprobe count before the pages are unmapped
  uprobes/core: Make background page replacement logic account for rss_stat counters
  uprobes/core: Optimize probe hits with the help of a counter
  uprobes/core: Allocate XOL slots for uprobes use
  uprobes/core: Handle breakpoint and singlestep exceptions
  uprobes/core: Rename bkpt to swbp
  uprobes/core: Make order of function parameters consistent across functions
  uprobes/core: Make macro names consistent
  uprobes: Update copyright notices
  uprobes/core: Move insn to arch specific structure
  uprobes/core: Remove uprobe_opcode_sz
  uprobes/core: Make instruction tables volatile
  uprobes: Move to kernel/events/
  uprobes/core: Clean up, refactor and improve the code
  ...

Pull input layer updates from Dmitry Torokhov:
 - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics
   Navpoint, LM8333 keypads, Wacom I2C touhscreen);
 - updates to existing touchpad drivers (ALPS, Sntelic);
 - Wacom driver now supports Intuos5;
 - device-tree bindings in numerous drivers;
 - other cleanups and fixes.

Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think
implies that the input layer device naming is broken, but let's see.  I
brough it up with Dmitry.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: matrix-keymap - fix building keymaps
  Input: spear-keyboard - document DT bindings
  Input: spear-keyboard - add device tree bindings
  Input: matrix-keymap - wire up device tree support
  Input: matrix-keymap - uninline and prepare for device tree support
  Input: adp5588 - add support for gpio names
  Input: omap-keypad - dynamically handle register offsets
  Input: synaptics - fix compile warning
  MAINTAINERS: adjust input-related patterns
  Input: ALPS - switch to using input_mt_report_finger_count
  Input: ALPS - add semi-MT support for v4 protocol
  Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
  Input: atmel_mxt_ts - dump each message on just 1 line
  Input: atmel_mxt_ts - do not read extra (checksum) byte
  Input: atmel_mxt_ts - verify object size in mxt_write_object
  Input: atmel_mxt_ts - only allow root to update firmware
  Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
  Input: sentelic - report device's production serial number
  Input: tl6040-vibra - Device Tree support
  Input: evdev - properly handle read/write with count 0
  ...