Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 153
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 21 1月, 2013 2 次提交
    • D
      drm/i915: use drm_modeset_lock_all · a0e99e68
      由 Daniel Vetter 提交于 
      Two exceptions:
- debugfs files only read information which is not related to crtc, so
  can stay on the modeset_config lock.
- Same holds for the edp vdd work in intel_dp.c. Add a corresponding
  WARN_ON and a comment next to the intel_dp struct fields for
  documentation.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      a0e99e68
    • D
      drm: add drm_modeset_lock|unlock_all · 84849903
      由 Daniel Vetter 提交于 
      This is the first step towards introducing the new modeset locking
scheme. The plan is to put helper functions into place at all the
right places step-by-step, so that the final patch to switch on the
new locking scheme doesn't need to touch every single driver.

This helper here will serve as the shotgun solutions for all places
where a more fine-grained locking isn't (yet) implemented.

v2: Fixup kerneldoc for unlock_all.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      84849903
  3. 20 1月, 2013 9 次提交
    • D
      drm: encapsulate crtc->set_config calls · 2d13b679
      由 Daniel Vetter 提交于 
      With refcounting we need to adjust framebuffer refcounts at each
callsite - much easier to do if they all call the same little helper
function.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      2d13b679
    • D
      drm/<drivers>: Unified handling of unimplemented fb->create_handle · af26ef3b
      由 Daniel Vetter 提交于 
      Some drivers don't have real ->create_handle callbacks.

- cirrus/ast/mga200: Returns either 0 or -EINVAL.

- udl: Didn't even bother with a callback, leading to a nice
  userspace-triggerable OOPS.

- vmwgfx: This driver bothered with an implementation to return 0 as
  the handle (which is the canonical no-obj gem handle).

All have in common that ->create_handle doesn't really make too much
sense for them - that ioctl is used only for seamless fb takeover in
the radeon/nouveau/i915 ddx drivers. So allow drivers to not implement
this and return a consistent -ENODEV.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      af26ef3b
    • D
      drm/nouveau: try to protect nbo->pin_refcount · 0ae6d7bc
      由 Daniel Vetter 提交于 
      ... by moving the bo_pin/bo_unpin manipulation of the pin_refcount
under the protection of the ttm reservation lock. pin/unpin seems
to get called from all over the place, so atm this is completely racy.

After this patch there are only a few places in cleanup functions
left which access ->pin_refcount without locking. But I'm hoping that
those are safe and some other code invariant guarantees that this
won't blow up.

In any case, I only need to fix up pin/unpin to make ->pageflip work
safely, so let's keep it at that.

Add a comment to the header to explain the new locking rule.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      0ae6d7bc
    • D
      drm/nouveau: protect evo_wait/evo_kick sections with a channel mutex · 59ad1465
      由 Daniel Vetter 提交于 
      With per-crtc locks modeset operations can run in parallel, and the
cursor code uses the device-global evo master channel for hw frobbing.
But the pageflip code can also sync with the master under some
circumstances. Hence just wrap things up in a mutex to ensure that
pushbuf access doesn't intermingle.

The approach here is a bit overkill since the per-crtc channels used
to schedule the pageflips could probably be used without this pushbuf
locking, but I'm not familiar enough with the nouveau codebase to be
sure of that.

v2: Add missing mutex_init to avoid angering lockdep.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      59ad1465
    • D
      drm/gma500: move fbcon restore to lastclose · 7147573a
      由 Daniel Vetter 提交于 
      Doing this within the fb->destroy callback leads to a locking
nightmare. And all other drm drivers that restore the fbcon do
it in lastclose, too.

With this adjustments all fb->destroy callbacks optionally drop
references to any gem objects used as backing storage, call
drm_framebuffer_cleanup and then kfree the struct. Which nicely
simplifies the locking for framebuffer unreferencing and freeing,
since this doesn't require that we hold the mode_config lock. A
slight exception is the vmwgfx surface backed framebuffer, it also
calls drm_master_put and removes the object from a device-private
framebuffer list. Both seem to have solid locking in place already.

Conclusion is that now it is no longer required to hold the
mode_config lock while freeing a framebuffer.

v2: Drop the corresponding mutex_lock WARN check from
drm_framebuffer_unreference.

v3: Use just the mode_config lock not modeset_lock_all, due to patch
reordering.
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      7147573a
    • D
      drm/vmwgfx: reorder framebuffer init sequence · 80f0b5af
      由 Daniel Vetter 提交于 
      vmwgfx has an oddity, when failing to reference the surface it'll
return 0, since that's what the successfull drm_framebuffer_init will
leave behind in ret. Fix this up by returning -EINVAL.

Split out from all the other driver updates due to the above tiny
semantic change. Shouldn't matter though since the reference grabbing
seemingly can't fail.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      80f0b5af
    • D
      drm/<drivers>: reorder framebuffer init sequence · c7d73f6a
      由 Daniel Vetter 提交于 
      With more fine-grained locking we can no longer rely on the big
mode_config lock to prevent concurrent access to mode resources
like framebuffers. Instead a framebuffer becomes accessible to
other threads as soon as it is added to the relevant lookup
structures. Hence it needs to be fully set up by the time drivers
call drm_framebuffer_init.

This patch here is the drivers part of that reorg. Nothing really fancy
going on safe for three special cases.

- exynos needs to be careful to properly unref all handles.
- nouveau gets a resource leak fixed for free: one of the error
  cases didn't cleanup the framebuffer, which is now moot since
  the framebuffer is only registered once it is fully set up.
- vmwgfx requires a slight reordering of operations, I'm hoping I didn't
  break anything (but it's refcount management only, so should be safe).

v2: Split out exynos, since it's a bit more hairy than expected.

v3: Drop bogus cirrus hunk noticed by Richard Wilbur.

v4: Split out vmwgfx since there's a small change in return values.

Reviewed-by: Rob Clark <rob@ti.com> (core + omapdrm)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      c7d73f6a
    • D
      drm/doc: integrate drm_crtc.c kerneldoc · 065a50ed
      由 Daniel Vetter 提交于 
      And do a quick pass to adjust them to the last few (years?) of changes
...

This time actually compile-tested ;-)
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      065a50ed
    • D
      drm: review locking rules in drm_crtc.c · 8faf6b18
      由 Daniel Vetter 提交于 
      - config_cleanup was confused: It claimed that callers need to hold
  the modeset lock, but the connector|encoder_cleanup helpers grabbed
  that themselves (note that crtc_cleanup did _not_ grab the modeset
  lock). Which resulted in all drivers _not_ hodling the lock. Since
  this is for single-threaded cleanup code, drop the requirement from
  docs and also drop the lock_grabbing from all _cleanup functions.

- Kill the LOCKING section in the doctype, since clearly we're not
  good enough to keep them up-to-date. And misleading locking
  documentation is worse than useless (see e.g. the comment in the
  vmgfx driver about the cleanup mess). And since for most functions
  the very first line either grabs the lock or has a WARN_ON(!locked)
  the documentation doesn't really add anything.

- Instead put in some effort into explaining the only two special
  cases a bit better: config_init and config_cleanup are both called
  from single-threaded setup/teardown code, so don't do any locking.
  It's the driver's job though to enforce this.

- Where lacking, add a WARN_ON(!is_locked). Not many places though,
  since locking around fbdev setup/teardown is through-roughly screwed
  up, and so will break almost every single WARN annotation I've tried
  to add.

- Add a drm_modeset_is_locked helper - the Grate Modset Locking Rework
  will use the compiler to assist in the big reorg by renaming the
  mode lock, so start encapsulating things. Unfortunately this ended
  up in the "wrong" header file since it needs the definition of
  struct drm_device.

v2: Drop most WARNS again - we hit them all over the place, mostly in
the setup and teardown sequences. And trying to fix it up leads to
nice deadlocks, since the locking in the setup code is really
inconsistent.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      8faf6b18
  5. 18 1月, 2013 2 次提交
  7. 17 1月, 2013 22 次提交
  9. 16 1月, 2013 4 次提交
  11. 15 1月, 2013 1 次提交
    • T
      ALSA: hda/hdmi - Work around "alsactl restore" errors · 6f54c361
      由 Takashi Iwai 提交于 
      When "alsactl restore" is performed on HDMI codecs, it tries to
restore the channel map value since the channel map controls are
writable.  But hdmi_chmap_ctl_put() returns -EBADFD when no PCM stream
is assigned yet, and this results in an error message from alsactl.
Although the error is harmless, it's certainly ugly and can be
regarded as a regression.

As a workaround, this patch changes the return code in such a case to
be zero for making others happy.  (A slight excuse is: when the chmap
is changed through the proper alsa-lib API, the PCM status is checked
there anyway, so we don't have to be too strict in the kernel side.)

Cc: <stable@vger.kernel.org> [v3.7+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      6f54c361