Starting with version 4.5, GCC has a new built-in function
__builtin_unreachable() that can be used in places like the kernel's
BUG() where inline assembly is used to transfer control flow.  This
eliminated the need for an endless loop in these places.

The patch adds a new macro 'unreachable()' that will expand to either
__builtin_unreachable() or an endless loop depending on the compiler
version.

Change from v1: Simplify unreachable() for non-GCC 4.5 case.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two spare field in the header common to all GFS2
metadata. One is just the right size to fit a journal id
in it, and this patch updates the journal code so that each
time a metadata block is modified, we tag it with the journal
id of the node which is performing the modification.

The reason for this is that it should make it much easier to
debug issues which arise if we can tell which node was the
last to modify a particular metadata block.

Since the field is updated before the block is written into
the journal, each journal should only contain metadata which
is tagged with its own journal id. The one exception to this
is the journal header block, which might have a different node's
id in it, if that journal was recovered by another node in the
cluster.

Thus each journal will contain a record of which nodes recovered
it, via the journal header.

The other field in the metadata header could potentially be
used to hold information about what kind of operation was
performed, but for the time being we just zero it on each
transaction so that if we use it for that in future, we'll
know that the information (where it exists) is reliable.

I did consider using the other field to hold the journal
sequence number, however since in GFS2's journaling we write
the modified data into the journal and not the original
data, this gives no information as to what action caused the
modification, so I think we can probably come up with a better
use for those 64 bits in the future.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Sending a message to userspace in a generic format to warn
of events (e.g. quota exceeded) in the quota subsystem is
a generically useful feature. This patch makes some minor
changes to the send_message function from dquot.c renaming
it quota_send_message, moving it to quota.c and exporting it
for use by filesystems which do not use the dquot code.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is required for cluster filesystems which want to use
cached ACLs so that they can invalidate the cache when
required.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>

Maybe 4.1.0 doesn't too, but this fixed it for me.

Caused by:

 4a312769: x86: Turn the copy_from_user check into an (optional) compile time warning
 9f0cf4ad: x86: Use __builtin_object_size() to validate the buffer size for copy_from_user()
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <200910090724.n997OQl6013538@imap1.linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is a real fix for problem of utime/stime values decreasing
described in the thread:

   http://lkml.org/lkml/2009/11/3/522

Now cputime is accounted in the following way:

 - {u,s}time in task_struct are increased every time when the thread
   is interrupted by a tick (timer interrupt).

 - When a thread exits, its {u,s}time are added to signal->{u,s}time,
   after adjusted by task_times().

 - When all threads in a thread_group exits, accumulated {u,s}time
   (and also c{u,s}time) in signal struct are added to c{u,s}time
   in signal struct of the group's parent.

So {u,s}time in task struct are "raw" tick count, while
{u,s}time and c{u,s}time in signal struct are "adjusted" values.

And accounted values are used by:

 - task_times(), to get cputime of a thread:
   This function returns adjusted values that originates from raw
   {u,s}time and scaled by sum_exec_runtime that accounted by CFS.

 - thread_group_cputime(), to get cputime of a thread group:
   This function returns sum of all {u,s}time of living threads in
   the group, plus {u,s}time in the signal struct that is sum of
   adjusted cputimes of all exited threads belonged to the group.

The problem is the return value of thread_group_cputime(),
because it is mixed sum of "raw" value and "adjusted" value:

  group's {u,s}time = foreach(thread){{u,s}time} + exited({u,s}time)

This misbehavior can break {u,s}time monotonicity.
Assume that if there is a thread that have raw values greater
than adjusted values (e.g. interrupted by 1000Hz ticks 50 times
but only runs 45ms) and if it exits, cputime will decrease (e.g.
-5ms).

To fix this, we could do:

  group's {u,s}time = foreach(t){task_times(t)} + exited({u,s}time)

But task_times() contains hard divisions, so applying it for
every thread should be avoided.

This patch fixes the above problem in the following way:

 - Modify thread's exit (= __exit_signal()) not to use task_times().
   It means {u,s}time in signal struct accumulates raw values instead
   of adjusted values.  As the result it makes thread_group_cputime()
   to return pure sum of "raw" values.

 - Introduce a new function thread_group_times(*task, *utime, *stime)
   that converts "raw" values of thread_group_cputime() to "adjusted"
   values, in same calculation procedure as task_times().

 - Modify group's exit (= wait_task_zombie()) to use this introduced
   thread_group_times().  It make c{u,s}time in signal struct to
   have adjusted values like before this patch.

 - Replace some thread_group_cputime() by thread_group_times().
   This replacements are only applied where conveys the "adjusted"
   cputime to users, and where already uses task_times() near by it.
   (i.e. sys_times(), getrusage(), and /proc/<PID>/stat.)

This patch have a positive side effect:

 - Before this patch, if a group contains many short-life threads
   (e.g. runs 0.9ms and not interrupted by ticks), the group's
   cputime could be invisible since thread's cputime was accumulated
   after adjusted: imagine adjustment function as adj(ticks, runtime),
     {adj(0, 0.9) + adj(0, 0.9) + ....} = {0 + 0 + ....} = 0.
   After this patch it will not happen because the adjustment is
   applied after accumulated.

v2:
 - remove if()s, put new variables into signal_struct.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4B162517.8040909@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- Remove if({u,s}t)s because no one call it with NULL now.
- Use cputime_{add,sub}().
- Add ifndef-endif for prev_{u,s}time since they are used
  only when !VIRT_CPU_ACCOUNTING.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <4B1624C7.7040302@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reorder task_struct field for TRACE_IRQFLAGS to remove padding
on 64-bit.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4B135F50.8070302@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

enter_syscall_print_##sname and exit_syscall_print_##sname don't
need to have a global scope. Make them static.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1259734990-9034-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

498657a4 incorrectly assumed
that preempt wasn't disabled around context_switch() and thus
was fixing imaginary problem.  It also broke KVM because it
depended on ->sched_in() to be called with irq enabled so that
it can do smp calls from there.

Revert the incorrect commit and add comment describing different
contexts under with the two callbacks are invoked.

Avi: spotted transposed in/out in the added comment.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NAvi Kivity <avi@redhat.com>
Cc: peterz@infradead.org
Cc: efault@gmx.de
Cc: rusty@rustcorp.com.au
LKML-Reference: <1259726212-30259-2-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use only one prof_sysenter_enable() instead of
prof_sysenter_enable_##sname()

use only one prof_sysenter_disable() instead of
prof_sysenter_disable_##sname()

use only one prof_sysexit_enable() instead of
prof_sysexit_enable_##sname()

use only one prof_sysexit_disable() instead of
prof_sysexit_disable_##sname()
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D2A1.8060304@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use only one init_syscall_trace instead of
many init_enter_##sname()/init_exit_##sname()
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D29B.6090708@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add syscall_nr field to struct syscall_metadata,
it helps us to get syscall number easier.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D293.6090800@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use ->enter_event->id instead of ->enter_id
use ->exit_event->id instead of ->exit_id
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D288.7030001@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Set event_enter_##sname->data to its metadata,
it makes codes simpler.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D282.7050709@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix event_enter_##sname->event
fix event_exit_##sname->event

remove unused event_syscall_enter and event_syscall_exit
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D278.4090209@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move slow_work's debugging proc file to debugfs.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Requested-and-acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There was confusion between the array size and the highest ISEL
value possible.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Lennert Buytenhek noticed that delBA handling in mac80211
was broken and has remotely triggerable problems, some of
which are due to some code shuffling I did that ended up
changing the order in which things were done -- this was

  commit d75636ef
  Author: Johannes Berg <johannes@sipsolutions.net>
  Date:   Tue Feb 10 21:25:53 2009 +0100

    mac80211: RX aggregation: clean up stop session

and other parts were already present in the original

  commit d92684e6
  Author: Ron Rindjunsky <ron.rindjunsky@intel.com>
  Date:   Mon Jan 28 14:07:22 2008 +0200

      mac80211: A-MPDU Tx add delBA from recipient support

The first problem is that I moved a BUG_ON before various
checks -- thereby making it possible to hit. As the comment
indicates, the BUG_ON can be removed since the ampdu_action
callback must already exist when the state is != IDLE.

The second problem isn't easily exploitable but there's a
race condition due to unconditionally setting the state to
OPERATIONAL when a delBA frame is received, even when no
aggregation session was ever initiated. All the drivers
accept stopping the session even then, but that opens a
race window where crashes could happen before the driver
accepts it. Right now, a WARN_ON may happen with non-HT
drivers, while the race opens only for HT drivers.

For this case, there are two things necessary to fix it:
 1) don't process spurious delBA frames, and be more careful
    about the session state; don't drop the lock

 2) HT drivers need to be prepared to handle a session stop
    even before the session was really started -- this is
    true for all drivers (that support aggregation) but
    iwlwifi which can be fixed easily. The other HT drivers
    (ath9k and ar9170) are behaving properly already.
Reported-by: NLennert Buytenhek <buytenh@marvell.com>
Cc: stable@kernel.org
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When retransmitting due to T3 timeout, retransmit all the
in-flight chunks for the corresponding  transport/path, including
chunks sent less then 1 rto ago.
This is the correct behaviour according to rfc4960 section 6.3.3
E3 and
"Note: Any DATA chunks that were sent to the address for which the
 T3-rtx timer expired but did not fit in one MTU (rule E3 above)
 should be marked for retransmission and sent as soon as cwnd
 allows (normally, when a SACK arrives). ".

This fixes problems when more then one path is present and the T3
retransmission of the first chunk that timeouts stops the T3 timer
for the initial active path, leaving all the other in-flight
chunks waiting forever or until a new chunk is transmitted on the
same path and timeouts (and this will happen only if the cwnd
allows sending new chunks, but since cwnd was dropped to MTU by
the timeout => it will wait until the first heartbeat).

Example: 10 packets in flight, sent at 0.1 s intervals on the
primary path. The primary path is down and the first packet
timeouts. The first packet is retransmitted on another path, the
T3 timer for the primary path is stopped and cwnd is set to MTU.
All the other 9 in-flight packets will not be retransmitted
(unless more new packets are sent on the primary path which depend
on cwnd allowing it, and even in this case the 9 packets will be
retransmitted only after a new packet timeouts which even in the
best case would be more then RTO).

This commit reverts d0ce9291 and
also removes the now unused transport->last_rto, introduced in
 b6157d8e.

p.s  The problem is not only when multiple paths are there.  It
can happen in a single homed environment.  If the application
stops sending data, it possible to have a hung association.
Signed-off-by: NAndrei Pelinescu-Onciul <andrei@iptel.org>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most of the irq_req_t typedef'd struct can be re-worked quite
easily:

(1) IRQInfo2 was unused in any case, so drop it.

(2) IRQInfo1 was used write-only, so drop it.

(3) Instance (private data to be passed to the IRQ handler):
	Most PCMCIA drivers using pcmcia_request_irq() to actually
	register an IRQ handler set the "dev_id" to the same pointer
	as the "priv" pointer in struct pcmcia_device. Modify the two
	exceptions (ipwireless, ibmtr_cs) to also work this waym and
	set the IRQ handler's "dev_id" to p_dev->priv unconditionally.

(4) Handler is to be of type irq_handler_t.

(5) Handler != NULL already tells whether an IRQ handler is present.
	Therefore, we do not need the IRQ_HANDLER_PRESENT flag in
	irq_req_t.Attributes.

CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: Jaroslav Kysela <perex@perex.cz>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Karsten Keil <isdn@linux-pingi.de>
for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Update remaining users and remove deprecated handle_to_dev() macro

CC: Harald Welte <laforge@gnumonks.org>
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

pcmcia_request_window() only needs a pointer to struct pcmcia_device, not
a pointer to a pointer.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Acked-by: Karsten Keil <keil@b1-systems.de> (for ISDN)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Logic changes based on top of the other patches:

This set of patches changed window_handle_t from being a pointer to an
unsigned long. The unsigned long is now a simple index into socket->win[].
Going from a pointer to unsigned long should leave the user space interface
unchanged unless I'm mistaken.

This change results in code that is less error prone and a user space
interface which is much cleaner and safer. A nice side effect is that we
are also are able to remove all members except one from window_t.

[ linux@dominikbrodowski.net:
	Update to 2.6.31. Also, a plain "index" to socket->win[] does not
	work, as several codepaths rely on "window_handle_t" being
	non-zero if used. Therefore, set the window_handle_t to the
	socket->win[] index + 1. ]

CC: netdev@vger.kernel.org
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

No logic changes, just pass struct pcmcia_socket to pcmcia_get_mem_page()

[linux@dominikbrodowski.net: update to 2.6.31]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

No logic changes, just pass struct pcmcia_device to pcmcia_map_mem_page()

[linux@dominikbrodowski.net: update to 2.6.31]
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Acked-by: Karsten Keil <keil@b1-systems.de> (for ISDN)
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

No logic changes, just pass struct pcmcia_device to pcmcia_release_window().

[linux@dominikbrodowski.net: update to 2.6.31]
CC: netdev@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Kernel breakpoints are created using functions in which we pass
breakpoint parameters as individual variables: address, length
and type.

Although it fits well for x86, this just does not scale across
architectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-2-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In-kernel user breakpoints are created using functions in which
we pass breakpoint parameters as individual variables: address,
length and type.

Although it fits well for x86, this just does not scale across
archictectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Async scanning introduced a very wide window where the SCSI device is
up and running but has not yet been added to sysfs.  We delay the
adding until all scans have completed to retain the same ordering as
sync scanning.

This delay in visibility causes an oops if a device is removed before
we make it visible because the SCSI removal routines have an inbuilt
assumption that if a device is in SDEV_RUNNING state, it must be
visible (which is not necessarily true in the async scanning case).

Fix this by introducing an additional is_visible flag which we can use
to condition the tear down so we do the right thing for running but
not yet made visible.
Reported-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Use of msecs_to_jiffies() for nsecs_to_cputime() have some
problems:

 - The type of msecs_to_jiffies()'s argument is unsigned int, so
   it cannot convert msecs greater than UINT_MAX = about 49.7 days.

 - msecs_to_jiffies() returns MAX_JIFFY_OFFSET if MSB of argument
   is set, assuming that input was negative value.  So it cannot
   convert msecs greater than INT_MAX = about 24.8 days too.

This patch defines a new function nsecs_to_jiffies() that can
deal greater values, and that can deal all incoming values as
unsigned.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Amrico Wang <xiyou.wangcong@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@linux.vnet.ibm.com>
LKML-Reference: <4B0E16E7.5070307@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now all task_{u,s}time() pairs are replaced by task_times().
And task_gtime() is too simple to be an inline function.

Cleanup them all.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16D1.70902@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Functions task_{u,s}time() are called in pair in almost all
cases.  However task_stime() is implemented to call task_utime()
from its inside, so such paired calls run task_utime() twice.

It means we do heavy divisions (div_u64 + do_div) twice to get
utime and stime which can be obtained at same time by one set
of divisions.

This patch introduces a function task_times(*tsk, *utime,
*stime) to retrieve utime and stime at once in better, optimized
way.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16AE.906@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add signal_overflow_fail and signal_lose_info tracepoints
for signal-lost events.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Use siginfo string macro
Suggested-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215658.30449.9934.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a tracepoint where a process gets a signal. This tracepoint
shows signal-number, sa-handler and sa-flag.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Add siginfo argument
 - Fix comment
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Reviewed-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215651.30449.20926.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move signal sending event to events/signal.h. This patch also
renames sched_signal_send event to signal_generate.

Changes in v4:
 - Fix a typo of task_struct pointer.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Add siginfo argument
 - Add siginfo storing macro
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Reviewed-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215645.30449.60208.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The original format for sched_stat_iowait and sched_stat_sleep:

  $ cat events/sched/sched_stat_iowait/format
  ...
  print fmt: "comm=%s pid=%d delay=%Lu [ns]", ...
  $ cat events/sched/sched_stat_sleep/format
  ...
  print fmt: "comm=%s pid=%d delay=%Lu [ns]", ...

But commit commit 75ec29ab
("tracing: Convert some sched trace events to DEFINE_EVENT and
_PRINT") broke the format:

  $ cat events/sched/sched_stat_iowait/format
  print fmt: "task: %s:%d iowait: %Lu [ns]", ...
  $ cat events/sched/sched_stat_sleep/format
  print fmt: "task: %s:%d sleep: %Lu [ns]", ...

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E2951.9050800@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
 294695    6104     340  301139   49853 fs/ext4/ext4.o.old
 289983    6104     324  296411   485db fs/ext4/ext4.o

5 events are convertd:

  ext4__write_begin: ext4_write_begin, ext4_da_write_begin
  ext4__write_end: ext4_{ordered, writeback, journalled}_write_end

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E2938.2040708@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  34903    1693     448   37044    90b4 fs/jbd2/journal.o.old
  31931    1693     416   34040    84f8 fs/jbd2/journal.o

Four events are converted:

  jbd2_commit: jbd2_start_commit,
               jbd2_commit_{locking, flushing, logging}

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E290F.7030909@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>