arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS
driver. A more logical place for it is in include/video.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The Intel Nehalem offcore bits implemented in:

  e994d7d2: perf: Fix LLC-* events on Intel Nehalem/Westmere

... are wrong: they implemented _ACCESS as _HIT and counted OTHER_CORE_HIT* as
MISS even though its clearly documented as an L3 hit ...

Fix them and the Westmere definitions as well.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1299119690-13991-3-git-send-email-ming.m.lin@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

We make use of ptrace_get_breakpoints() / ptrace_put_breakpoints() to
protect ptrace_set_debugreg() even if CONFIG_HAVE_HW_BREAKPOINT if off.
However in this case, these APIs are not implemented.

To fix this, push the protection down inside the relevant ifdef.
Best would be to export the code inside
CONFIG_HAVE_HW_BREAKPOINT into a standalone function to cleanup
the ifdefury there and call the breakpoint ref API inside. But
as it is more invasive, this should be rather made in an -rc1.

Fixes this build error:

  arch/powerpc/kernel/ptrace.c:1594: error: implicit declaration of function 'ptrace_get_breakpoints' make[2]: ***
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: LPPC <linuxppc-dev@lists.ozlabs.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1304639598-4707-1-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The use of base for %ebx in this file is arbitrary, *except* that we
also use it to compute the real-mode segment.  Therefore, make it so
that r_base really is the true address to which %ebx points.

This resolves kernel bugzilla 33302.
Reported-and-tested-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-08os5wi3yq1no0y4i5m4z7he@git.kernel.org

mask_rw_pte is currently checking if a pfn is a pagetable page if it
falls in the range pgt_buf_start - pgt_buf_end but that is incorrect
because pgt_buf_end is a moving target: pgt_buf_top is the real
boundary.
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

As a consequence of the commit:

commit 4b239f45
Author: Yinghai Lu <yinghai@kernel.org>
Date:   Fri Dec 17 16:58:28 2010 -0800

    x86-64, mm: Put early page table high

it causes the Linux kernel to crash under Xen:

mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) mm.c:2466:d0 Bad type (saw 7400000000000001 != exp 1000000000000000) for mfn b1d89 (pfn bacf7)
(XEN) mm.c:3027:d0 Error while pinning mfn b1d89
(XEN) traps.c:481:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
...

The reason is that at some point init_memory_mapping is going to reach
the pagetable pages area and map those pages too (mapping them as normal
memory that falls in the range of addresses passed to init_memory_mapping
as argument). Some of those pages are already pagetable pages (they are
in the range pgt_buf_start-pgt_buf_end) therefore they are going to be
mapped RO and everything is fine.
Some of these pages are not pagetable pages yet (they fall in the range
pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
are going to be mapped RW.  When these pages become pagetable pages and
are hooked into the pagetable, xen will find that the guest has already
a RW mapping of them somewhere and fail the operation.
The reason Xen requires pagetables to be RO is that the hypervisor needs
to verify that the pagetables are valid before using them. The validation
operations are called "pinning" (more details in arch/x86/xen/mmu.c).

In order to fix the issue we mark all the pages in the entire range
pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
is completed only the range pgt_buf_start-pgt_buf_end is reserved by
init_memory_mapping. Hence the kernel is going to crash as soon as one
of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
ranges are RO).

For this reason, this function is introduced which is called _after_
the init_memory_mapping has completed (in a perfect world we would
call this function from init_memory_mapping, but lets ignore that).

Because we are called _after_ init_memory_mapping the pgt_buf_[start,
end,top] have all changed to new values (b/c another init_memory_mapping
is called). Hence, the first time we enter this function, we save
away the pgt_buf_start value and update the pgt_buf_[end,top].

When we detect that the "old" pgt_buf_start through pgt_buf_end
PFNs have been reserved (so memblock_x86_reserve_range has been called),
we immediately set out to RW the "old" pgt_buf_end through pgt_buf_top.

And then we update those "old" pgt_buf_[end|top] with the new ones
so that we can redo this on the next pagetable.
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Updated with Jeremy's comments]
[v2: Added the crash output]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

numa_cleanup_meminfo() trims each memblk between low (0) and
high (max_pfn) limits and discards empty ones.  However, the
emptiness detection incorrectly used equality test.  If the
start of a memblk is higher than max_pfn, it is empty but fails
the equality test and doesn't get discarded.

The condition triggers when max_pfn is lower than start of a
NUMA node and results in memory misconfiguration - leading to
WARN_ON()s and other funnies.  The bug was discovered in devel
branch where 32bit too uses this code path for NUMA init.  If a
node is above the addressing limit, max_pfn ends up lower than
the node triggering this problem.

The failure hasn't been observed on x86-64 but is still possible
with broken hardware e820/NUMA info.  As the fix is very low
risk, it would be better to apply it even for 64bit.

Fix it by using >= instead of ==.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
[ Extracted the actual fix from the original patch and rewrote patch description. ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110501171204.GO29280@htj.dyndns.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Older AMD K8 processors (Revisions A-E) are affected by erratum
400 (APIC timer interrupts don't occur in C states greater than
C1). This, for example, means that X86_FEATURE_ARAT flag should
not be set for these parts.

This addresses regression introduced by commit
b87cf80a ("x86, AMD: Set ARAT
feature on AMD processors") where the system may become
unresponsive until external interrupt (such as keyboard input)
occurs. This results, for example, in time not being reported
correctly, lack of progress on the system and other lockups.
Reported-by: NJoerg-Volker Peetz <jvpeetz@web.de>
Tested-by: NJoerg-Volker Peetz <jvpeetz@web.de>
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NBoris Ostrovsky <Boris.Ostrovsky@amd.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1304113663-6586-1-git-send-email-ostr@amd64.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

When CONFIG_OABI_COMPAT is set, the wrapper for semtimedop does not
bound the nsops argument.  A sufficiently large value will cause an
integer overflow in allocation size, followed by copying too much data
into the allocated buffer.  Fix this by restricting nsops to SEMOPM.
Untested.

Cc: stable@kernel.org
Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

pfault, dasd diag and virtio all use the same external interrupt number.
The respective interrupt handlers decide by the subcode if they are
meant to handle the interrupt.
Counting is currently done before looking at the subcode which means
each handler counts an interrupt even if it is not handling it.
Fix this by moving the kstat code after the code which looks at the
subcode.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

- Remove coding standard violations reported by checkpatch.pl
- Delete comment about handling of conditional branches which is no
  longer true.
- Delete comment at end of file which lists all ARM instructions. This
  duplicates data available in the ARM ARM and seems like an
  unnecessary maintenance burden to keep this up to date and accurate.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Being able to probe NOP instructions is useful for hard-coding probeable
locations and is used by the kprobes test code.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

These bit field manipulation instructions occur several thousand
times in an ARMv7 kernel.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The MOVW and MOVT instructions account for approximately 7% of all
instructions in a ARMv7 kernel as GCC uses them instead of a literal
pool.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The instruction decoding in space_cccc_000x needs to reject probing of
instructions with undefined patterns as they may in future become
defined and then emulated faultily - as has already happened with the
SMC instruction.

This fix is achieved by testing for the instruction patterns we want to
probe and making the the default fall-through paths reject probes. This
also allows us to remove some explicit tests for instructions that we
wish to reject, as that is now the default action.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The tests to explicitly reject probing CPS, RFE and SRS instructions
are redundant as the default case is now to reject undecoded patterns.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The PLD instructions wasn't being decoded correctly and the emulation
code wasn't adjusting PC correctly.

As the PLD instruction is only a performance hint we emulate it as a
simple nop, and we can broaden the instruction decoding to take into
account newer PLI and PLDW instructions.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The emulation of SETEND was broken as it changed the endianess for
the running kprobes handling code. Rather than adding a new simulation
routine to fix this we'll just reject probing of SETEND as these should
be very rare in the kernel.

Note, the function emulate_none is now unused but it is left in the
source code as future patches will use it.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Following the change to remove support for coprocessor instructions
we are left with three stub functions which can be consolidated.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The kernel doesn't currently support VFP or Neon code, and probing of
code with CP15 operations is fraught with bad consequences. Therefore we
don't need the ability to probe coprocessor instructions and the code to
support this can be removed.

The removed code also had at least two bugs:
 - MRC into R15 should set CPSR not trash PC
 - LDC and STC which use PC as base register needed the address offset by 8
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The USAD8 instruction wasn't being explicitly decoded leading
to the incorrect emulation routine being called. It can be correctly
decoded in the same way as the signed multiply instructions so we move
the decoding there.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The signed multiply instructions were being decoded incorrectly.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

These sign extension instructions are encoded as extend-and-add
instructions where the register to add is specified as r15. The decoding
routines weren't checking for this and were using the incorrect
emulation code, giving incorrect results.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The instructions space for media instructions contains some undefined
patterns. We need to reject probing of these because they may in future
become defined and the kprobes code may then emulate them faultily.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The v6T2 RBIT instruction was accidentally being emulated correctly,
this patch adds correct decoding for the instruction.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

These instructions are specified as UNPREDICTABLE.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The decoding of these instructions got the register indexed and
immediate indexed forms the wrong way around, causing incorrect
emulation.

Instructions like "LDRD Rx, [Rx]" were corrupting Rx because the base
register writeback was being performed unconditionally, overwriting the
value just loaded from memory. The fix is to only writeback the base
register when that form of the instruction is used. Note, now that we
reject probing writeback with PC the emulation code doesn't need the
check rn!=15.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Using PC as an base register with writeback is UNPREDICTABLE, as is non
word-sized loads or stores of PC. (We only really care about preventing
loads to PC but it keeps the code simpler if we also exclude stores.)
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The decoding of these instructions got the register indexed and
immediate indexed forms the wrong way around, causing incorrect
emulation.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The emulation code for STREX and LDREX instructions is faulty, however,
rather than attempting to fix this we reject probes of these
instructions. We do this because they can never succeed in gaining
exclusive access as the exception framework clears the exclusivity
monitor when a probes breakpoint is hit. (This is a general problem
when probing all instructions executing between a LDREX and its
corresponding STREX and can lead to infinite retry loops.)
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The instructions space for 'Multiply and multiply-accumulate'
instructions contains some undefined patterns. We need to reject
probing of these because they may in future become defined and the
kprobes code may then emulate them faultily.

This has already happened with the new MLS instruction which this patch
also adds correct decoding for as well as tightening up other decoding
tests. (Before this patch the wrong emulation routine was being called
for MLS though it still produced correct results.)
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The MRS instruction should set mode and interrupt bits in the read value
so it is simpler to use a new simulation routine (simulate_mrs) rather
than some modified emulation.

prep_emulate_rd12 is now unused and removed.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

We need to reject probing of instructions which read SPSR because
we can't handle this as the value in SPSR is lost when the exception
handler for the probe breakpoint first runs.

This patch also fixes the bitmask for MRS instructions decoding to
include checking bits 5-7.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Emulation of instructions like "ADD rd, rn, #<const>" would result in a
corrupted value for rd.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Probing these instructions was corrupting R0 because the emulation code
didn't account for the fact that they don't write a result to a
register.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Now we have the framework code handling conditionally executed
instructions we can remove redundant checks in individual simulation
routines.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

When a kprobe is placed onto conditionally executed ARM instructions,
many of the emulation routines used to single step them produce corrupt
register results. Rather than fix all of these cases we modify the
framework which calls them to test the relevant condition flags and, if
the test fails, skip calling the emulation code.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Currently emulate_ldrd and emulate_strd don't even have the adjustment
of the PC value, so in case of Rn == PC, it will not update the PC
incorrectly but instead load/store from the wrong address.  Let's add
both the adjustment of the PC value and the check for PC == PC.
Signed-off-by: NViktor Rosendahl <viktor.rosendahl@nokia.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>