- 03 8月, 2016 40 次提交
-
-
由 Stephen Boyd 提交于
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.orgSigned-off-by: NStephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vikram Mulukutla 提交于
Some low memory systems with complex peripherals cannot afford to have the relatively large firmware images taking up valuable memory during suspend and resume. Change the internal implementation of firmware_class to disallow caching based on a configurable option. In the near future, variants of request_firmware will take advantage of this feature. Link: http://lkml.kernel.org/r/20160607164741.31849-3-stephen.boyd@linaro.org [stephen.boyd@linaro.org: Drop firmware_desc design and use flags] Signed-off-by: NVikram Mulukutla <markivx@codeaurora.org> Signed-off-by: NStephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This design creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. This patch sets adds support to the request firmware API to load the firmware directly into a pre-allocated buffer, skipping the intermediate copying step and alleviating memory pressure during firmware loading. The drawback is that we can't use the firmware caching feature because the memory for the firmware cache is not managed by the firmware layer. This patch (of 3): We use similar structured code to read and write the kmapped firmware pages. The only difference is read copies from the kmap region and write copies to it. Consolidate this into one function to reduce duplication. Link: http://lkml.kernel.org/r/20160607164741.31849-2-stephen.boyd@linaro.orgSigned-off-by: NStephen Boyd <stephen.boyd@linaro.org> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
The bottom two bits of radix tree entries are reserved for special use by the radix tree code itself. A comment detailing their usage was added by commit 3bcadd6f ("radix-tree: free up the bottom bit of exceptional entries for reuse") This comment states that if the bottom two bits are '11', this means that this is a locked exceptional entry. It turns out that this bit combination was never actually used. Radix tree locking for DAX was indeed implemented, but it actually used the third LSB: /* We use lowest available exceptional entry bit for locking */ #define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT) This locking code was also made specific to the DAX code instead of being generally implemented in radix-tree.h. So, fix the comment. Link: http://lkml.kernel.org/r/1468997731-2155-1-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
The crc32 test function measures the elapsed time in nanoseconds, but uses 'struct timespec' for that. We want to remove timespec from the kernel for y2038 compatibility, and ktime_get_ns() also helps make the code simpler here. It is also slightly better to use monontonic time, as we are only interested in the time difference. Link: http://lkml.kernel.org/r/20160617143932.3289626-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de> Cc: "David S . Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sebastian Ott 提交于
When a large enough area in the iommu bitmap is found but would span a boundary we continue the search starting from the next bit position. For large allocations this can lead to several useless invocations of bitmap_find_next_zero_area() and iommu_is_span_boundary(). Continue the search from the start of the next segment (which is the next bit position such that we'll not cross the same segment boundary again). Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1606081910070.3211@schleppiSigned-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
If a vcs is used, look to see if the vcs tracks the file specified and so the -f option becomes optional. Link: http://lkml.kernel.org/r/7c86a8df0d48770c45778a43b6b3e4627b2a90ee.1469746395.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Borislav Petkov 提交于
Add a "printk.devkmsg" kernel command line parameter which controls how userspace writes into /dev/kmsg. It has three options: * ratelimit - ratelimit logging from userspace. * on - unlimited logging from userspace * off - logging from userspace gets ignored The default setting is to ratelimit the messages written to it. This changes the kernel default setting of "on" to "ratelimit" and we do that because we want to keep userspace spamming /dev/kmsg to sane levels. This is especially moot when a small kernel log buffer wraps around and messages get lost. So the ratelimiting setting should be a sane setting where kernel messages should have a bit higher chance of survival from all the spamming. It additionally does not limit logging to /dev/kmsg while the system is booting if we haven't disabled it on the command line. Furthermore, we can control the logging from a lower priority sysctl interface - kernel.printk_devkmsg. That interface will succeed only if printk.devkmsg *hasn't* been supplied on the command line. If it has, then printk.devkmsg is a one-time setting which remains for the duration of the system lifetime. This "locking" of the setting is to prevent userspace from changing the logging on us through sysctl(2). This patch is based on previous patches from Linus and Steven. [bp@suse.de: fixes] Link: http://lkml.kernel.org/r/20160719072344.GC25563@nazgul.tnic Link: http://lkml.kernel.org/r/20160716061745.15795-3-bp@alien8.deSigned-off-by: NBorislav Petkov <bp@suse.de> Cc: Dave Young <dyoung@redhat.com> Cc: Franck Bui <fbui@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Borislav Petkov 提交于
Extend the ratelimiting facility to print the amount of suppressed lines when it is being released. This use case is aimed at short-termed, burst-like users for which we want to output the suppressed lines stats only once, after it has been disposed of. For an example, see /dev/kmsg usage in a follow-on patch. Also, change the printk() line we issue on release to not use "callbacks" as it is misleading: we're not suppressing callbacks but printk() calls. This has been separated from a previous patch by Linus. Link: http://lkml.kernel.org/r/20160716061745.15795-2-bp@alien8.deSigned-off-by: NBorislav Petkov <bp@suse.de> Cc: Dave Young <dyoung@redhat.com> Cc: Franck Bui <fbui@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Borislav Petkov 提交于
Move the DRIVER_NAME macro definition before the first usage site and fix build error. Link: http://lkml.kernel.org/r/20160801163937.GA28119@nazgul.tnicSigned-off-by: NBorislav Petkov <bp@suse.de> Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
asm-generic headers are generic implementations for architecture specific code and should not be included by common code. Thus use the asm/ version of sections.h to get at the linker sections. Link: http://lkml.kernel.org/r/1468285008-7331-1-git-send-email-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
Messages' levels and console log level are inspected when the actual printing occurs, which may provoke console_unlock() and console_cont_flush() to waste CPU cycles on every message that has loglevel above the current console_loglevel. Schematically, console_unlock() does the following: console_unlock() { ... for (;;) { ... raw_spin_lock_irqsave(&logbuf_lock, flags); skip: msg = log_from_idx(console_idx); if (msg->flags & LOG_NOCONS) { ... goto skip; } level = msg->level; len += msg_print_text(); >> sprintfs memcpy, etc. if (nr_ext_console_drivers) { ext_len = msg_print_ext_header(); >> scnprintf ext_len += msg_print_ext_body(); >> scnprintfs etc. } ... raw_spin_unlock(&logbuf_lock); call_console_drivers(level, ext_text, ext_len, text, len) { if (level >= console_loglevel && >> drop the message !ignore_loglevel) return; console->write(...); } local_irq_restore(flags); } ... } The thing here is this deferred `level >= console_loglevel' check. We are wasting CPU cycles on sprintfs/memcpy/etc. preparing the messages that we will eventually drop. This can be huge when we register a new CON_PRINTBUFFER console, for instance. For every such a console register_console() resets the console_seq, console_idx, console_prev and sets a `exclusive console' pointer to replay the log buffer to that just-registered console. And there can be a lot of messages to replay, in the worst case most of which can be dropped after console_loglevel test. We know messages' levels long before we call msg_print_text() and friends, so we can just move console_loglevel check out of call_console_drivers() and format a new message only if we are sure that it won't be dropped. The patch factors out loglevel check into suppress_message_printing() function and tests message->level and console_loglevel before formatting functions in console_unlock() and console_cont_flush() are getting executed. This improves things not only for exclusive CON_PRINTBUFFER consoles, but for every console_unlock() that attempts to print a message of level above the console_loglevel. Link: http://lkml.kernel.org/r/20160627135012.8229-1-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: NPetr Mladek <pmladek@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Using functions instead of macros can reduce overall code size by eliminating unnecessary "KERN_SOH<digit>" prefixes from format strings. defconfig x86-64: $ size vmlinux* text data bss dec hex filename 10193570 4331464 1105920 15630954 ee826a vmlinux.new 10192623 4335560 1105920 15634103 ee8eb7 vmlinux.old As the return value are unimportant and unused in the kernel tree, these new functions return void. Miscellanea: - change pr_<level> macros to call new __pr_<level> functions - change vprintk_nmi and vprintk_default to add LOGLEVEL_<level> argument [akpm@linux-foundation.org: fix LOGLEVEL_INFO, per Joe] Link: http://lkml.kernel.org/r/e16cc34479dfefcae37c98b481e6646f0f69efc3.1466718827.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
A trivial cosmetic change: interrupt.h header is redundant since commit 6b898c07 ("console: use might_sleep in console_lock"). Link: http://lkml.kernel.org/r/20160620132847.21930-1-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis de Bethencourt 提交于
kernel.h header doesn't directly use dynamic debug, instead we can include it in module.c (which used it via kernel.h). printk.h only uses it if CONFIG_DYNAMIC_DEBUG is on, changing the inclusion to only happen in that case. Link: http://lkml.kernel.org/r/1468429793-16917-1-git-send-email-luisbg@osg.samsung.com [luisbg@osg.samsung.com: include dynamic_debug.h in drb_int.h] Link: http://lkml.kernel.org/r/1468447828-18558-2-git-send-email-luisbg@osg.samsung.comSigned-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Change task_work_cancel() to use lockless_dereference(), this is what the code really wants but we didn't have this helper when it was written. Also add the fast-path task->task_works == NULL check, in the likely case this task has no pending works and we can avoid spin_lock(task->pi_lock). While at it, change other users of ACCESS_ONCE() to use READ_ONCE(). Link: http://lkml.kernel.org/r/20160610150042.GA13868@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen Gang 提交于
For pure bool function's return value, bool is a little better more or less than int. Link: http://lkml.kernel.org/r/1469331815-2026-1-git-send-email-chengang@emindsoft.com.cnSigned-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Lüssing 提交于
For one thing, summarizes all non-umlaut versions into the umlaut one (Linus Luessing -> Linus Lüssing). For another, maps obsolete email addresses to the current @c0d3.blue one. Link: http://lkml.kernel.org/r/1467805371-2773-1-git-send-email-linus.luessing@c0d3.blueSigned-off-by: NLinus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Don't user forward declarations of internal kernel structures in headers exported to userspace. Move "struct completion;". Move "struct task_struct;". Link: http://lkml.kernel.org/r/20160713215808.GA22486@p183.telecom.bySigned-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
When alloc_disk(0) is used the ->major number is completely ignored. All devices are allocated with a major of BLOCK_EXT_MAJOR. So remove registration and deregistration of 'major'. Link: http://lkml.kernel.org/r/20160602064318.4403.49955.stgit@nobleSigned-off-by: NNeilBrown <neilb@suse.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
UML is a bit special since it does not have iomem nor dma. That means a lot of drivers will not build if they miss a dependency on HAS_IOMEM. s390 used to have the same issues but since it gained PCI support UML is the only stranger. We are tired of patching dozens of new drivers after every merge window just to un-break allmod/yesconfig UML builds. One could argue that a decent driver has to know on what it depends and therefore a missing HAS_IOMEM dependency is a clear driver bug. But the dependency not obvious and not everyone does UML builds with COMPILE_TEST enabled when developing a device driver. A possible solution to make these builds succeed on UML would be providing stub functions for ioremap() and friends which fail upon runtime. Another one is simply disabling COMPILE_TEST for UML. Since it is the least hassle and does not force use to fake iomem support let's do the latter. Link: http://lkml.kernel.org/r/1466152995-28367-1-git-send-email-richard@nod.atSigned-off-by: NRichard Weinberger <richard@nod.at> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Valdis Kletnieks 提交于
Suppress a bunch of warnings of the form: fs/proc/task_mmu.c: In function 'show_smap_vma_flags': fs/proc/task_mmu.c:635:22: warning: initialized field overwritten [-Wt override-init] [ilog2(VM_READ)] = "rd", ^~~~ fs/proc/task_mmu.c:635:22: note: (near initialization for 'mnemonics[0]') They happen because of the way we intentionally build the table, so silence the warning when building with 'make W=1'. Link: http://lkml.kernel.org/r/8727.1470022083@turing-police.cc.vt.eduSigned-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
/proc/stat shows (among lots of other things) the current boottime (i.e. number of seconds since boot). While a 32-bit number is sufficient for this particular case, we want to get rid of the 'struct timespec' suffers from a 32-bit overflow in 2038. This changes the code to use a struct timespec64, which is known to be safe in all cases. Link: http://lkml.kernel.org/r/20160617201247.2292101-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This was needed before to ensure that ->signal != 0 and do_each_thread() is safe, see commit b95c35e7 ("oom: fix the unsafe usage of badness() in proc_oom_score()") for details. Today tsk->signal can't go away and for_each_thread(tsk) is always safe. Link: http://lkml.kernel.org/r/20160608211921.GA15508@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis de Bethencourt 提交于
Salah Triki and Luis de Bethencourt are taking over maintainership of befs. Link: http://lkml.kernel.org/r/1469651079-32455-1-git-send-email-luisbg@osg.samsung.comSigned-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 seokhoon.yoon 提交于
cgroup's document path is changed to "cgroup-v1". update it. Link: http://lkml.kernel.org/r/1470148443-6509-1-git-send-email-iamyooon@gmail.comSigned-off-by: Nseokhoon.yoon <iamyooon@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Iooss 提交于
handle_object_size_mismatch() used %pk to format a kernel pointer with pr_err(). This seemed to be a misspelling for %pK, but using this to format a kernel pointer does not make much sence here. Therefore use %p instead, like in handle_missaligned_access(). Link: http://lkml.kernel.org/r/20160730083010.11569-1-nicolas.iooss_linux@m4x.orgSigned-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
Commit 53dad6d3 ("ipc: fix race with LSMs") updated ipc_rcu_putref() to receive rcu freeing function but used generic ipc_rcu_free() instead of msg_rcu_free() which does security cleaning. Running LTP msgsnd06 with kmemleak gives the following: cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88003c0a11f8 (size 8): comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s) hex dump (first 8 bytes): 1b 00 00 00 01 00 00 00 ........ backtrace: kmemleak_alloc+0x23/0x40 kmem_cache_alloc_trace+0xe1/0x180 selinux_msg_queue_alloc_security+0x3f/0xd0 security_msg_queue_alloc+0x2e/0x40 newque+0x4e/0x150 ipcget+0x159/0x1b0 SyS_msgget+0x39/0x40 entry_SYSCALL_64_fastpath+0x13/0x8f Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to only use ipc_rcu_free in case of security allocation failure in newary() Fixes: 53dad6d3 ("ipc: fix race with LSMs") Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
We must call shrink_slab() for each memory cgroup on both global and memcg reclaim in shrink_node_memcg(). Commit d71df22b55099 accidentally changed that so that now shrink_slab() is only called with memcg != NULL on memcg reclaim. As a result, memcg-aware shrinkers (including dentry/inode) are never invoked on global reclaim. Fix that. Fixes: b2e18757 ("mm, vmscan: begin reclaiming pages on a per-node basis") Link: http://lkml.kernel.org/r/1470056590-7177-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Radix trees may be used not only for storing page cache pages, so unconditionally accounting radix tree nodes to the current memory cgroup is bad: if a radix tree node is used for storing data shared among different cgroups we risk pinning dead memory cgroups forever. So let's only account radix tree nodes if it was explicitly requested by passing __GFP_ACCOUNT to INIT_RADIX_TREE. Currently, we only want to account page cache entries, so mark mapping->page_tree so. Fixes: 58e698af ("radix-tree: account radix_tree_node to memory cgroup") Link: http://lkml.kernel.org/r/1470057188-7864-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Potapenko 提交于
If the total amount of memory assigned to quarantine is less than the amount of memory assigned to per-cpu quarantines, |new_quarantine_size| may overflow. Instead, set it to zero. [akpm@linux-foundation.org: cleanup: use WARN_ONCE return value] Link: http://lkml.kernel.org/r/1470063563-96266-1-git-send-email-glider@google.com Fixes: 55834c59 ("mm: kasan: initial memory quarantine implementation") Signed-off-by: NAlexander Potapenko <glider@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
Currently we just dump stack in case of double free bug. Let's dump all info about the object that we have. [aryabinin@virtuozzo.com: change double free message per Alexander] Link: http://lkml.kernel.org/r/1470153654-30160-1-git-send-email-aryabinin@virtuozzo.com Link: http://lkml.kernel.org/r/1470062715-14077-6-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
The state of object currently tracked in two places - shadow memory, and the ->state field in struct kasan_alloc_meta. We can get rid of the latter. The will save us a little bit of memory. Also, this allow us to move free stack into struct kasan_alloc_meta, without increasing memory consumption. So now we should always know when the last time the object was freed. This may be useful for long delayed use-after-free bugs. As a side effect this fixes following UBSAN warning: UBSAN: Undefined behaviour in mm/kasan/quarantine.c:102:13 member access within misaligned address ffff88000d1efebc for type 'struct qlist_node' which requires 8 byte alignment Link: http://lkml.kernel.org/r/1470062715-14077-5-git-send-email-aryabinin@virtuozzo.comReported-by: Nkernel test robot <xiaolong.ye@intel.com> Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
Size of slab object already stored in cache->object_size. Note, that kmalloc() internally rounds up size of allocation, so object_size may be not equal to alloc_size, but, usually we don't need to know the exact size of allocated object. In case if we need that information, we still can figure it out from the report. The dump of shadow memory allows to identify the end of allocated memory, and thereby the exact allocation size. Link: http://lkml.kernel.org/r/1470062715-14077-4-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
SLUB doesn't require disabled interrupts to call ___cache_free(). Link: http://lkml.kernel.org/r/1470062715-14077-3-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: NAlexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
Currently we call quarantine_reduce() for ___GFP_KSWAPD_RECLAIM (implied by __GFP_RECLAIM) allocation. So, basically we call it on almost every allocation. quarantine_reduce() sometimes is heavy operation, and calling it with disabled interrupts may trigger hard LOCKUP: NMI watchdog: Watchdog detected hard LOCKUP on cpu 2irq event stamp: 1411258 Call Trace: <NMI> dump_stack+0x68/0x96 watchdog_overflow_callback+0x15b/0x190 __perf_event_overflow+0x1b1/0x540 perf_event_overflow+0x14/0x20 intel_pmu_handle_irq+0x36a/0xad0 perf_event_nmi_handler+0x2c/0x50 nmi_handle+0x128/0x480 default_do_nmi+0xb2/0x210 do_nmi+0x1aa/0x220 end_repeat_nmi+0x1a/0x1e <<EOE>> __kernel_text_address+0x86/0xb0 print_context_stack+0x7b/0x100 dump_trace+0x12b/0x350 save_stack_trace+0x2b/0x50 set_track+0x83/0x140 free_debug_processing+0x1aa/0x420 __slab_free+0x1d6/0x2e0 ___cache_free+0xb6/0xd0 qlist_free_all+0x83/0x100 quarantine_reduce+0x177/0x1b0 kasan_kmalloc+0xf3/0x100 Reduce the quarantine_reduce iff direct reclaim is allowed. Fixes: 55834c59("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/1470062715-14077-2-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: NDave Jones <davej@codemonkey.org.uk> Acked-by: NAlexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
Once an object is put into quarantine, we no longer own it, i.e. object could leave the quarantine and be reallocated. So having set_track() call after the quarantine_put() may corrupt slab objects. BUG kmalloc-4096 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0xffff8804540de850-0xffff8804540de857. First byte 0xb5 instead of 0x6b ... INFO: Freed in qlist_free_all+0x42/0x100 age=75 cpu=3 pid=24492 __slab_free+0x1d6/0x2e0 ___cache_free+0xb6/0xd0 qlist_free_all+0x83/0x100 quarantine_reduce+0x177/0x1b0 kasan_kmalloc+0xf3/0x100 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x109/0x3e0 mmap_region+0x53e/0xe40 do_mmap+0x70f/0xa50 vm_mmap_pgoff+0x147/0x1b0 SyS_mmap_pgoff+0x2c7/0x5b0 SyS_mmap+0x1b/0x30 do_syscall_64+0x1a0/0x4e0 return_from_SYSCALL_64+0x0/0x7a INFO: Slab 0xffffea0011503600 objects=7 used=7 fp=0x (null) flags=0x8000000000004080 INFO: Object 0xffff8804540de848 @offset=26696 fp=0xffff8804540dc588 Redzone ffff8804540de840: bb bb bb bb bb bb bb bb ........ Object ffff8804540de848: 6b 6b 6b 6b 6b 6b 6b 6b b5 52 00 00 f2 01 60 cc kkkkkkkk.R....`. Similarly, poisoning after the quarantine_put() leads to false positive use-after-free reports: BUG: KASAN: use-after-free in anon_vma_interval_tree_insert+0x304/0x430 at addr ffff880405c540a0 Read of size 8 by task trinity-c0/3036 CPU: 0 PID: 3036 Comm: trinity-c0 Not tainted 4.7.0-think+ #9 Call Trace: dump_stack+0x68/0x96 kasan_report_error+0x222/0x600 __asan_report_load8_noabort+0x61/0x70 anon_vma_interval_tree_insert+0x304/0x430 anon_vma_chain_link+0x91/0xd0 anon_vma_clone+0x136/0x3f0 anon_vma_fork+0x81/0x4c0 copy_process.part.47+0x2c43/0x5b20 _do_fork+0x16d/0xbd0 SyS_clone+0x19/0x20 do_syscall_64+0x1a0/0x4e0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by putting an object in the quarantine after all other operations. Fixes: 80a9201a ("mm, kasan: switch SLUB to stackdepot, enable memory quarantine for SLUB") Link: http://lkml.kernel.org/r/1470062715-14077-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: NDave Jones <davej@codemonkey.org.uk> Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Reported-by: NSasha Levin <alexander.levin@verizon.com> Acked-by: NAlexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
We've had a report about soft lockups caused by lock bouncing in the soft reclaim path: BUG: soft lockup - CPU#0 stuck for 22s! [kav4proxy-kavic:3128] RIP: 0010:[<ffffffff81469798>] [<ffffffff81469798>] _raw_spin_lock+0x18/0x20 Call Trace: mem_cgroup_soft_limit_reclaim+0x25a/0x280 shrink_zones+0xed/0x200 do_try_to_free_pages+0x74/0x320 try_to_free_pages+0x112/0x180 __alloc_pages_slowpath+0x3ff/0x820 __alloc_pages_nodemask+0x1e9/0x200 alloc_pages_vma+0xe1/0x290 do_wp_page+0x19f/0x840 handle_pte_fault+0x1cd/0x230 do_page_fault+0x1fd/0x4c0 page_fault+0x25/0x30 There are no memcgs created so there cannot be any in the soft limit excess obviously: [...] memory 0 1 1 so all this just seems to be mem_cgroup_largest_soft_limit_node trying to get spin_lock_irq(&mctz->lock) just to find out that the soft limit excess tree is empty. This is just pointless wasting of cycles and cache line bouncing during heavy parallel reclaim on large machines. The particular machine wasn't very healthy and most probably suffering from a memory leak which just caused the memory reclaim to trash heavily. But bouncing on the lock certainly didn't help... Fix this by optimistic lockless check and bail out early if the tree is empty. This is theoretically racy but that shouldn't matter all that much. First of all soft limit is a best effort feature and it is slowly getting deprecated and its usage should be really scarce. Bouncing on a lock without a good reason is surely much bigger problem, especially on large CPU machines. Link: http://lkml.kernel.org/r/1470073277-1056-1-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Zhong Jiang has reported a BUG_ON from huge_pte_alloc hitting when he runs his database load with memory online and offline running in parallel. The reason is that huge_pmd_share might detect a shared pmd which is currently migrated and so it has migration pte which is !pte_huge. There doesn't seem to be any easy way to prevent from the race and in fact seeing the migration swap entry is not harmful. Both callers of huge_pte_alloc are prepared to handle them. copy_hugetlb_page_range will copy the swap entry and make it COW if needed. hugetlb_fault will back off and so the page fault is retries if the page is still under migration and waits for its completion in hugetlb_fault. That means that the BUG_ON is wrong and we should update it. Let's simply check that all present ptes are pte_huge instead. Link: http://lkml.kernel.org/r/20160721074340.GA26398@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Reported-by: Nzhongjiang <zhongjiang@huawei.com> Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-