For some cards, ir_dev->props and ir_dev->raw are both NULL. These cards are
using built-in IR decoding instead of raw, and can't easily be made to switch
protocols.

So upon reading /sys/class/rc/rc?/protocols on such a card, return 'builtin' as
the supported and enabled protocol. Return -EINVAL on any attempts to change
the protocol. And most important of all, don't crash.
Signed-off-by: NBrian Rogers <brian@xyzw.org>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These keys are found on remote bundled with
Toshiba Qosmio F50-10q.

Found and tested by, Sami R <maesesami@gmail.com>
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The logic in ir_timer_keyup was inverted.

In case that values aren't equal,
the meaning of the time_is_after_eq_jiffies(ir->keyup_jiffies) is that
ir->keyup_jiffies is after the the jiffies or equally that
that jiffies are before the the ir->keyup_jiffies which is
exactly the situation we want to avoid (that the timeout is in the future)
Confusing Eh?
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Due to typo lirc bridge enabled wrong capability.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by Anton Blanchard <anton@samba.org>, double IR events on
2.6.36-rc2 and a DViCO FusionHDTV DVB-T Dual Express are happening:

[ 1351.032084] ir_keydown: i2c IR (FusionHDTV): key down event, key 0x0067, scancode 0x0051
[ 1351.281284] ir_keyup: keyup key 0x0067

ie one key down event and one key up event 250ms later.

So, we need to increase the repeat timeout, to avoid this bug to hit.

As we're doing it at core, this fix is not needed anymore at dib0700 driver.

Thanks-to: Anton Blanchard <anton@samba.org>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reported in lirc sf.net tracker and on lirc mailing list
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original code dereferenced ir->raw after freeing it and setting it
to NULL.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As pointed by Randy Dunlap <randy.dunlap@oracle.com>:
> ERROR: "ir_keydown" [drivers/media/video/ir-kbd-i2c.ko] undefined!
> ERROR: "__ir_input_register" [drivers/media/video/ir-kbd-i2c.ko] undefined!
> ERROR: "get_rc_map" [drivers/media/video/ir-kbd-i2c.ko] undefined!
> ERROR: "ir_input_unregister" [drivers/media/video/ir-kbd-i2c.ko] undefined!
> ERROR: "get_rc_map" [drivers/media/video/cx88/cx88xx.ko] undefined!
> ERROR: "ir_repeat" [drivers/media/video/cx88/cx88xx.ko] undefined!
> ERROR: "ir_input_unregister" [drivers/media/video/cx88/cx88xx.ko] undefined!
> ERROR: "ir_keydown" [drivers/media/video/cx88/cx88xx.ko] undefined!
> ERROR: "__ir_input_register" [drivers/media/video/cx88/cx88xx.ko] undefined!
> ERROR: "get_rc_map" [drivers/media/video/bt8xx/bttv.ko] undefined!
> ERROR: "ir_input_unregister" [drivers/media/video/bt8xx/bttv.ko] undefined!
> ERROR: "__ir_input_register" [drivers/media/video/bt8xx/bttv.ko] undefined!
> ERROR: "ir_g_keycode_from_table" [drivers/media/IR/ir-common.ko] undefined!
>
>
> #5101:
> (.text+0x8306e2): undefined reference to `ir_core_debug'
> (.text+0x830729): undefined reference to `ir_core_debug'
> ir-functions.c:(.text+0x830906): undefined reference to `ir_core_debug'
> (.text+0x8309d8): undefined reference to `ir_g_keycode_from_table'
> (.text+0x830acf): undefined reference to `ir_core_debug'
> (.text+0x830b92): undefined reference to `ir_core_debug'
> (.text+0x830bef): undefined reference to `ir_core_debug'
> (.text+0x830c6a): undefined reference to `ir_core_debug'
> (.text+0x830cf7): undefined reference to `ir_core_debug'
> budget-ci.c:(.text+0x89f5c8): undefined reference to `ir_keydown'
> budget-ci.c:(.text+0x8a0c58): undefined reference to `get_rc_map'
> budget-ci.c:(.text+0x8a0c80): undefined reference to `__ir_input_register'
> budget-ci.c:(.text+0x8a0ee0): undefined reference to `get_rc_map'
> budget-ci.c:(.text+0x8a11cd): undefined reference to `ir_input_unregister'
> (.text+0x8a8adb): undefined reference to `ir_input_unregister'
> dvb-usb-remote.c:(.text+0x8a9188): undefined reference to `get_rc_map'
> dvb-usb-remote.c:(.text+0x8a91b1): undefined reference to `__ir_input_register'
> dvb-usb-remote.c:(.text+0x8a9238): undefined reference to `get_rc_map'
> dib0700_core.c:(.text+0x8b04ca): undefined reference to `ir_keydown'
> dib0700_devices.c:(.text+0x8b2ea8): undefined reference to `ir_keydown'
> dib0700_devices.c:(.text+0x8b2ef0): undefined reference to `ir_keydown'

Those breakages seem to be caused by two bad things at IR_CORE Kconfig:

1) cx23885 is using select for IR_CORE;
2) the dvb-usb and sms dependency for IR_CORE were missing.

While here, allow users to un-select IR.
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

"ir_dev->props" can be NULL.  We only use raw mode if "ir_dev->props" is
non-NULL and "ir_dev->props->driver_type == RC_DRIVER_IR_RAW".
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a defintion for the "Print" button found on HP OEM
versions of the MCE remote.  All of the other keys found on the HP OEM
version of the remote match the other keys as already defined.

Because, who doesn't need "remote printing", while one is sitting on the
couch across from one's PC? ;)
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add latest unported version of this driver to media/IR.
Next patch will port it to ir core.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This way it is possible to use evtest to create keymap for unknown remote.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

LIRC: add new IOCTL that enables learning mode (wide band receiver)
Still missing features: carrier report & timeout reports.
Will need to pack these into ir_raw_event
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)

Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).

Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently, ir device registration fails if keymap requested by driver is not found.
Fix that by always compiling in the empty keymap, and using it as a failback.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds support for repeat detecting for NECX variant
Tested with uneversal remote
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Repeat space is 4 units, not 8.
Current code would never trigger a repeat.

However that isn't true for NECX, so repeat there
must be handled differently.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Reviewed-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently, jvc decoder will attempt misdetect next press as a repeat
of last keypress, therefore second keypress isn't detected.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It is perfectly possible to have ir_raw_event_work
running concurently on two cpus, thus we must protect
it from that situation.

This stems from the fact that if hardware sends short packets of samples
we might end up queueing the work item more times that nessesary.

Such job isn't well suited for a workqueue, so use a kernel thread.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some handlers (lirc for example) allocates memory on initialization,
doing so in atomic context is cumbersome.
Fixes warning about sleeping function in atomic context.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* lirc: Don't propagate reset event to userspace
* lirc: Remove strange logic from lirc that would make first sample always be pulse
* Make TO_US macro actualy print what it should.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Move IR drives below separate menu.
This allows to disable them.
Also correct a typo.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Moves drivers/staging/lirc/lirc_streamzap.c to
drivers/media/IR/streamzap.c, along with making the requisite Kconfig
and Makefile changes.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This ports lirc_streamzap.c over to ir-core in-place, to be followed by
a patch moving the driver over to drivers/media/IR/streamzap.c and
enabling the proper Kconfig bits.

Presently, the in-kernel keymap doesn't work, as the stock Streamzap
remote uses an RC-5-like, but not-quite-RC-5 protocol, which the
in-kernel RC-5 decoder doesn't cope with. The remote can be used right
now with the lirc bridge driver though, and other remotes (at least an
RC-6(A) MCE remote) work perfectly with the driver.

I'll take a look at making the existing RC-5 decoder cope with this odd
duck, possibly implement another standalone decoder engine, or just
throw up my hands and say "meh, use lirc"... But the driver itself
should be perfectly sound.

Remaining items on the streamzap TODO list:
- add LIRC_SET_REC_TIMEOUT-alike support
- add LIRC_GET_M{AX,IN}_TIMEOUT-alike support
- add LIRC_GET_REC_RESOLUTION-alike support

All of the above should be trivial to add. There are patches pending to
add this support to ir-core from Maxim Levitsky, and I'll take care of
these once his patches get integrated. None of them are currently
essential though.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The ir_input_dev gets filled in by __ir_input_register, the one
allocated in mceusb_init_input_dev was being overwritten by the correct
one shortly after it was initialized (ultimately resulting in a memory
leak). This bug was inherited from imon.c, and was pointed out to me by
Maxim Levitsky.

v2: fix incorrect dev arg to dev_dbg
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The ir_input_dev gets filled in by __ir_input_register, the one
allocated in imon_init_idev was being overwritten by the correct one
shortly after it was initialized (ultimately resulting in a memory
leak). Additionally, there was an ill-advised memcpy into that
extraneous ir_input_dev which gets fixed by this.

Ill-advised memcpy pointed out by Dmitry Torokhov, bad usage of
ir_input_dev pointed out by Maxim Levitsky.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Per Dmitry Torokhov, following input_unregister_device with an
input_free_device is forbidden, the former is sufficient alone.
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Rewrites the siano IR implementation. The previous implementation were
non-standard. As such, it has issues if more than one device registers IR,
as there used to have some static constants used during protocol decoding
phase. Also, it used to implement its on RAW decoder, and only for RC5.

The new code uses RC core subsystem for handling IR. This brings several
new features to the driver, including:
	- Allow to dynamically replace the IR keycodes;
	- Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY);
	- Supports lirc dev;
	- Doesn't have race conditions when more than one sms IR is
	  registered;
	- The code size for the IR implementation is very small;
	- it exports the IR features via /sys/class/rc.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use a more standard way to name those tables, as they're currently used
by the script that coverts those tables to be loaded via userspace.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of having one big keytable with 2 protocols inside, break it
into two separate tables, being one for NEC and another for RC-5 variants,
and properly identify what variant should be used at the boards entries.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There is a typo here.  We meant to test "rbuf" instead of "drv".  We
already tested "drv" earlier.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The lirc userspace needs all the current ioctls defined, and we need to
put the header files in places out-of-tree and/or staging lirc drivers
(which I plan to prep soon) can easily build with. I've actually tested this
in a tree w/all the lirc drivers queued up to be submitted for staging. I'm
also reasonably sure that Andy Walls is going to need most of the ioctls
anyway for his cx23888 IR driver work.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Spent a while last night getting device initialization packet captures
under Windows for all generations of devices. There are a few places
where we were doing things differently, and few things we were doing
that we don't need to do, particularly on gen3 hardware, and I *think*
one of those things is what was locking up my pinnacle hw from time to
time -- at least, its been perfectly well behaved every time its been
plugged in since making this change.

First up, we're adding a bit more to the gen1 init routine here. Its
not absolutely necessary, the hardware works the same both with and
without it, but I'd like to be consistent w/Windows here.

Second, DEVICE_RESET is never called when initializing either of my
gen3 devices, its only called for gen1 and gen2. The bits in the gen3
init after removing that, are safe (and interesting) to run on all
hardware, so there's no more gen3-specific init done, there's instead
a generic mceusb_get_parameters() that is run for all hardware.

Third, the gen3 flag isn't needed. We only care if hardware is gen3
during probe, so I've dropped that from the device flags struct.

Successfully tested on all three generations of mceusb hardware.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Prior init unification/simplification patch made these unused, forgot
to remove them, so this silences:

drivers/media/IR/mceusb.c: In function ‘mceusb_gen1_init’:
drivers/media/IR/mceusb.c:769: warning: unused variable ‘partial’
drivers/media/IR/mceusb.c:768: warning: unused variable ‘i’
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

New code should not rely on the big kernel lock,
so use the unlocked_ioctl file operation in lirc.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>