With bridges now moving to a separate registry they are no longer DRM
objects, hence this define is no longer needed.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Drivers implementing the universal planes API report the list of
supported pixel formats for the primary plane. Make sure the fb passed
to the setcrtc ioctl is compatible.

Drivers not implementing the universal planes API will have no format
reported for the primary plane, skip the check in that case.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both the legacy and atomic helpers need to check whether a plane
supports a given pixel format. The code is currently duplicated, share
it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Slightly extend the docbook.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats.  Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.

The proposal is to add a per-plane format modifier.  This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.

v1: original
v1.5: increase modifier to 64b

v2: Incorporate review comments from the big thread, plus a few more.

- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
  they're dealing with old userspace and need to fish out e.g. tiling
  from other information.
- After rolling out checks for ->modifier to all drivers I've decided
  that this is way too fragile and needs an explicit opt-in flag. So
  do that instead.
- Add a define (just for documentation really) for the "NONE"
  modifier. Imo we don't need to add mask #defines since drivers
  really should only do exact matches against values defined with
  fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
  sure whether that one is accurate.

v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
  it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
  properly documented, requested by Rob.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Rob Clark <robdclark@gmail.com> (v1.5)
Reviewed-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.

In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
	  add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
	  for the corresponding bridge so that the bridge receives
	  drm_device pointer and continues with connector and other
	  drm initializations.

The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.

The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".

The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.

The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.

drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Tested-by: NRahul Sharma <rahul.sharma@samsung.com>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Assign the pointer to bridge ops structure(drm_bridge_funcs) in
the bridge driver itself, instead of passing it to drm_bridge_init.

This will allow bridge driver developer to pack bridge private
information inside the bridge object and pass only the drm-relevant
information to drm_bridge_init.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Tested-by: NRahul Sharma <rahul.sharma@samsung.com>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Cursor plane updates have historically been fully async and mutliple
updates batched together for the next vsync. And userspace relies upon
that. Since implementing a full queue of async atomic updates is a bit
of work lets just recover the cursor specific behaviour with a hint
flag and some hacks to drop the vblank wait.

v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This is the infrastructure for DPMS ported to the atomic world.
Fundamental changes compare to legacy DPMS are:

- No more per-connector dpms state, instead there's just one per each
  display pipeline. So if you clone either you have to unclone first
  if you only want to switch off one screen, or you just switch of
  everything (like all desktops do). This massively reduces complexity
  for cloning since now there's no more half-enabled cloned configs to
  consider.

- Only on/off, dpms standby/suspend are as dead as real CRTs. Again
  reduces complexity a lot.

Now especially for backwards compat the really important part for dpms
support is that dpms on always succeeds (except for hw death and
unplugged cables ofc). Which means everything that could fail (like
configuration checking, resources assignments and buffer management)
must be done irrespective from ->active. ->active is really only a
toggle to change the hardware state. More precisely:

- Drivers MUST NOT look at ->active in their ->atomic_check callbacks.
  Changes to ->active MUST always suceed if nothing else changes.

- Drivers using the atomic helpers MUST NOT look at ->active anywhere,
  period. The helpers will take care of calling the respective
  enable/modeset/disable hooks as necessary. As before the helpers
  will carefully keep track of the state and not call any hooks
  unecessarily, so still no double-disables or enables like with crtc
  helpers.

- ->mode_set hooks are only called when the mode or output
  configuration changes, not for changes in ->active state.

- Drivers which reconstruct the state objects in their ->reset hooks
  or through some other hw state readout infrastructure must ensure
  that ->active reflects actual hw state.

This just implements the core bits and helper logic, a subsequent
patch will implement the helper code to implement legacy dpms with
this.

v2: Rebase on top of the drm ioctl work:
- Move crtc checks to the core check function.
- Also check for ->active_changed when deciding whether a modeset
  might happen (for the ALLOW_MODESET mode).
- Expose the ->active state with an atomic prop.

v3: Review from Rob
- Spelling fix in comment.
- Extract needs_modeset helper to consolidate the ->mode_changed ||
  ->active_changed checks.

v4: Fixup fumble between crtc->state and crtc_state.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Not a new type exposed to userspace, just a standard way to create
them since between range, bitmask and enum there's 3 different ways to
pull out a boolean prop.

Also add the kerneldoc for the recently added new prop types, which
Rob forgot all about.

v2: Fixup kerneldoc, spotted by Rob.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.

Cc: dri-devel@lists.freedesktop.org
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).

To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).

Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.

v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
  to make sure we deliver the delayed hoptplug events. Instead just
  jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
  since using probe helpers for anything dynamic without them
  initialized makes them all noops.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Tested-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.

This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NThierry Reding <treding@nvidia.com>

The atomic modeset ioctl can be used to push any number of new values
for object properties. The driver can then check the full device
configuration as single unit, and try to apply the changes atomically.

The ioctl simply takes a list of object IDs and property IDs and their
values.

Originally based on a patch from Ville Syrjälä, although it has mutated
(mutilated?) enough since then that you probably shouldn't blame it on
him ;-)

The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to
protect legacy userspace) and drm.atomic module param (for now).

v2: Check for file_priv->atomic to make sure we only allow userspace
in-the-know to use atomic.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Expose the core plane state as properties, so they can be updated via
atomic ioctl.

v2: atomic property flag
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties.  To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.

A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties.  Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: NRob Clark <robdclark@gmail.com>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we won't be using the obj->properties->values[] array to shadow
property values for atomic drivers, we are going to need a vfunc for
getting prop values.  Add that along w/ mandatory wrapper fxns.

v2: more comments and copypasta comment typo fix
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we add properties for all the standard plane/crtc/connector
attributes (in preperation for the atomic ioctl), we are going to want
to handle core state in core (rather than per driver).  Intercepting the
core properties will be easier if the atomic_set_property vfuncs are not
called directly, but instead have a mandatory wrapper function (which
will later serve as the point to intercept core properties).

v2: more verbose comments and copypasta comment fix
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For atomic drivers, we won't use the values array but instead shunt
things off to obj->atomic_get_property().  So to simplify things make
all read/write of properties values go through the accessors.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Keep property pointer, instead of id, in per mode-object attachments.
This will simplify things in later patches.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Useful since this way we can pass around just the state objects and
will get ther real object, too.

Specifically this allows us to again simplify the parameters for
set_crtc_for_plane.

v2: msm already has it's own specific plane_reset hook, don't forget
that one!

v3: Fixup kerneldoc, reported by 0-day builder.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com> (v2)
Tested-by: Rob Clark <robdclark@gmail.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The default call sequence for these two parts won't fit for all
drivers. So export the two pieces and explain with a bit of kerneldoc
when each should be called.

v2: Squash in fixup from Rob to actually add the newly exported
functions to headers

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The struct drm_connector_funcs kerneldoc refers to a part of struct
drm_crtc_funcs that no longer exists.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This takes the tiling info from the connector and
exposes it to userspace, as a blob object in a
connector property.

The contents of the blob is ABI.

v2: add property + function documentation.

v3: move property setup from previous patch.
add boilerplate + fix long line (Daniel)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This creates a tile group from DisplayID block, and
stores the pieces of parsed info from the DisplayID block
into the connector.

v2: add missing signoff, add new connector bits to docs.

v3: remove some debugging.
Signed-off-by: NDave Airlie <airlied@redhat.com>

A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.

DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.

v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.

v3: fix missing unlock.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.

Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were
previously making adjustments for doublescan modes and vscan > 1 modes,
which was incorrect.  Using our new helper fixes this mistake.

v2 (by Matt): Use new stereo doubling function (suggested by Ville)

v3 (by Matt):
 - Add missing kerneldoc (Daniel)
 - Use drm_mode_copy() (Jani)

v4 (by Matt):
 - Drop stereo doubling function again; add 'stereo only' flag
   to drm_mode_set_crtcinfo() instead (Ville)

v5 (by Matt):
 - Note behavioral change in drm_crtc_check_viewport() and
   intel_modeset_pipe_config(). (Ander)
 - Describe new adjustment flags in drm_mode_set_crtcinfo()'s
   kerneldoc. (Ander)

Cc: dri-devel@lists.freedesktop.org
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Reviewed-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add helper macros to iterate the current, or incoming set of planes
attached to a crtc.  These helpers are only available for drivers
converted to use atomic-helpers.
Signed-off-by: NRob Clark <robdclark@gmail.com>
[danvet: Squash in fixup from Rob to move the planemask iterator to
drm_crtc.h and document it. That one is needed by the atomic ioctl so
can't be in a helper library.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Chasing plane->state->crtc of planes that are *not* part of the same
atomic update is racy, making it incredibly awkward (or impossible) to
do something simple like iterate over all planes and figure out which
ones are attached to a crtc.

Solve this by adding a bitmask of currently attached planes in the
crtc-state.

Note that the transitional helpers do not maintain the plane_mask.  But
they only support the legacy ioctls, which have sufficient brute-force
locking around plane updates that they can continue to loop over all
planes to see what is attached to a crtc the old way.
Signed-off-by: NRob Clark <robdclark@gmail.com>
[danvet:
- Drop comments about locking in set_crtc_for_plane since they're a
  bit misleading - we already should hold lock for the current crtc.
- Also WARN_ON if get_state on the old crtc fails since that should
  have been done already.
- Squash in fixup to check get_plane_state return value, reported by
  Dan Carpenter and acked by Rob Clark.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I guess for hysterical raisins this was meant to be the way to read
blob properties. But that's done with the two-stage approach which
uses separate blob kms object and the special-purpose get_blob ioctl.

Shipping userspace seems to have never relied on this, and the kernel
also never put any blob thing onto that property. And nowadays it
would blow up, e.g. in drm_property_destroy. Also it makes no sense to
return values in an ioctl that only returns metadata about everything.

So let's ditch all the internal code for the blob list, rename the
list to be unambiguous and sprinkle comments all over the place to
explain this peculiar piece of api.

v2: Squash in fixup from Rob to remove now unused variables.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Yet another fallout from not considering DP MST hotplug. With the
previous patches we have stable indices, but it might still happen
that a connector gets added between when we allocate the array and
when we actually add a connector. Especially when we back off due to
ww mutex contention or similar issues.

So store the sizes of the arrays in struct drm_atomic_state and double
check them. We don't really care about races except that we want to
use a consistent value, so ACCESS_ONCE is all we need. And if we
indeed notice that we'd overrun the array then just give up and
restart the entire ioctl.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.

v2: rename properties to be more consistent.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The prototype and the function implementation differ in their signature.
Make them consistent and use an unsigned integer for the number of modes
while at it.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Creating a blob property will always copy the input data so the data
that is passed in can be const.
Signed-off-by: NThierry Reding <treding@nvidia.com>

size_t is the standard type when dealing with sizes of all kinds. Use it
consistently when instantiating DRM blob properties.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:

- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
  justification as for the equivalent change in drm_crtc_init done in

	commit d0fa1af4
	Author: Daniel Vetter <daniel.vetter@ffwll.ch>
	Date:   Mon Sep 8 09:02:49 2014 +0200

	    drm: Drop modeset locking from crtc init function

  Without these the drm_modeset_lock_init would fall over the exact
  same way.

- Since the atomic core code wraps the locking switching it to
  per-plane locks was a one-line change.

- For the legacy ioctls add a plane argument to the locking helper so
  that we can grab the right plane lock (cursor or primary). Since the
  universal cursor plane might not be there, or someone really crazy
  might forgoe the primary plane even accept NULL.

- Add some locking WARN_ON to the atomic helpers for good paranoid
  measure and to check that it all works out.

Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.

v2: I've forgotten about the load-detect code in i915.

v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to

commit 21e88620
Author: Rob Clark <robdclark@gmail.com>
Date:   Thu Oct 30 13:39:04 2014 -0400

    drm/vmwgfx: fix lock breakage

Rebased and fix this up.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch is for enabling async commits. It replaces an earlier
approach which added an async boolean paramter to the ->prepare_fb
callbacks. The idea is that prepare_fb picks up the right fence to
synchronize against, which is then used by the synchronous commit
helper. For async commits drivers can either register a callback to
the fence or simply do the synchronous wait in their async work queue.

v2: Remove unused variable.

v3: Only wait for fences after the point of no return in the part
of the commit function which can be run asynchronously. This is after
the atomic state has been swapped in, hence now check
plane->state->fence.

Also add a WARN_ON to make sure we don't try to wait on a fence when
there's no fb, just as a sanity check.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

So this is finally the integration of the crtc and plane helper
interfaces into the atomic helper functions.

In the check function we now have a few steps:

- First we update the output routing and figure out which crtcs need a
  full mode set. Suitable encoders are selected using ->best_encoder,
  with the same semantics as the crtc helpers of implicitly disabling
  all connectors currently using the encoder.

- Then we pull all other connectors into the state update which feed
  from a crtc which changes. This must be done do catch mode changes
  and similar updates - atomic updates are differences on top of the
  current state.

- Then we call all the various ->mode_fixup to compute the adjusted
  mode. Note that here we have a slight semantic difference compared
  to the crtc helpers: We have not yet updated the encoder->crtc link
  when calling the encoder's ->mode_fixup function. But that's a
  requirement when converting to atomic since we want to prepare the
  entire state completely contained with the over drm_atomic_state
  structure. So this must be carefully checked when converting drivers
  over to atomic helpers.

- Finally we do call the atomic_check functions on planes and crtcs.

The commit function is also quite a beast:

- The only step that can fail is done first, namely pinning the
  framebuffers. After that we cross the point of no return, an async
  commit would push all that into the worker thread.

- The disabling of encoders and connectors is a bit tricky, since
  depending upon the final state we need to select different crtc
  helper functions.

- Software tracking is a bit clarified compared to the crtc helpers:
  We commit the software state before starting to touch the hardware,
  like crtc helpers. But since we just swap them we still have the old
  state (i.e. the current hw state) around, which is really handy to
  write simple disable functions. So no more
  drm_crtc_helper_disable_all_unused_functions kind of fun because
  we're leaving unused crtcs/encoders behind. Everything gets shut
  down in-order now, which is one of the key differences of the i915
  helpers compared to crtc helpers and a really nice additional
  guarantee.

- Like with the plane helpers the atomic commit function waits for one
  vblank to pass before calling the framebuffer cleanup function.

Compared to Rob's helper approach there's a bunch of upsides:

- All the interfaces which can fail are called in the ->check hook
  (i.e. ->best_match and the various ->mode_fixup hooks). This means
  that drivers can just reuse those functions and don't need to move
  everything into ->atomic_check callbacks. If drivers have no need
  for additional constraint checking beyong their existing crtc
  helper callbacks they don't need to do anything.

- The actual commit operation is properly stage: First we prepare
  framebuffers, which can potentially still fail (due to memory
  exhausting). This is important for the async case, where this must
  be done synchronously to correctly return errors.

- The output configuration changes (done with crtc helper functions)
  and the plane update (using atomic plane helpers) are correctly
  interleaved: First we shut down any crtcs that need changing, then
  we update planes and finally we enable everything again. Hardware
  without GO bits must be more careful with ordering, which this
  sequence enables.

- Also for hardware with shared output resources (like display PLLs)
  we first must shut down the old configuration before we can enable
  the new one. Otherwise we can hit an impossible intermediate state
  where there's not enough PLLs (which is the point behind atomic
  updates).

v2:
- Ensure that users of ->check update crtc_state->enable correctly.
- Update the legacy state in crtc/plane structures. Eventually we want
  to remove that, but for now the drm core still expects this (especially
  the plane->fb pointer).

v3: A few changes for better async handling:

- Reorder the software side state commit so that it happens all before
  we touch the hardware. This way async support becomes very easy
  since we can punt all the actual hw touching to a worker thread. And
  as long as we synchronize with that thread (flushing or cancelling,
  depending upon what the driver can handle) before we commit the next
  software state there's no need for any locking in the worker thread
  at all. Which greatly simplifies things.

  And as long as we synchronize with all relevant threads we can have
  a lot of them (e.g. per-crtc for per-crtc updates) running in
  parallel.

- Expose pre/post plane commit steps separately. We need to expose the
  actual hw commit step anyway for drivers to be able to implement
  asynchronous commit workers. But if we expose pre/post and plane
  commit steps individually we allow drivers to selectively use atomic
  helpers.

- I've forgotten to call encoder/bridge ->mode_set functions, fix
  this.

v4: Add debug output and fix a mixup between current and new state
that resulted in crtcs not getting updated correctly. And in an
Oops ...

v5:
- Be kind to driver writers in the vblank wait functions.. if thing
  aren't working yet, and vblank irq will never come, then let's not
  block forever.. especially under console-lock.
- Correctly clear connector_state->best_encoder when disabling.
  Spotted while trying to understand a report from Rob Clark.
- Only steal encoder if it actually changed, otherwise hilarity ensues
  if we steal from the current connector and so set the ->crtc pointer
  unexpectedly to NULL. Reported by Rob Clark.
- Bail out in disable_outputs if an output currently doesn't have a
  best_encoder - this means it's already disabled.

v6: Fixupe kerneldoc as reported by Paulo. And also fix up kerneldoc
in drm_crtc.h.

v7: Take ownership of the atomic state and clean it up with
drm_atomic_state_free().

v8 Various improvements all over:
- Polish code comments and kerneldoc.
- Improve debug output to make sure all failure cases are logged.
- Treat enabled crtc with no connectors as invalid input from userspace.
- Don't ignore the return value from mode_fixup().

v9:
- Improve debug output for crtc_state->mode_changed.

v10:
- Fixup the vblank waiting code to properly balance the vblank_get/put
  calls.
- Better comments when checking/computing crtc->mode_changed

v11: Fixup the encoder stealing logic: We can't look at encoder->crtc
since that's not in the atomic state structures and might be updated
asynchronously in and async commit. Instead we need to inspect all the
connector states and check whether the encoder is currently in used
and if so, on which crtc.

v12: Review from Sean:
- A few spelling fixes.
- Flatten control flow indent by converting if blocks to early
  continue/return in 2 places.
- Capture connectors_for_crtc return value in int num_connectors
  instead of bool has_connectors and do an explicit int->bool
  conversion with !!. I think the helper is more useful for drivers if
  it returns the number of connectors (e.g. to detect cloning
  configurations), so decided to keep that return value.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These two functions allow drivers to reuse their atomic plane helpers
functions for the primary plane to implement the interfaces required
by the crtc helpers for the legacy ->set_config callback.

This is purely transitional and won't be used once the driver is fully
converted. But it allows partial conversions to the atomic plane
helpers which are functional.

v2:
- Use ->atomic_duplicate_state if available.
- Don't forget to run crtc_funcs->atomic_check.

v3: Shift source coordinates correctly for 16.16 fixed point.

v4: Don't forget to call ->atomic_destroy_state if available.

v5: Fixup kerneldoc.

v6: Reuse the plane_commit function from the transitional plane
helpers to avoid too much duplication.

v7:
- Remove some stale comment.
- Correctly handle the lack of plane->state object, necessary for
  transitional use.

v8: Fixup an embarrassing h/vdisplay mixup.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is the first cut of atomic helper code. As-is it's only useful to
implement a pure atomic interface for plane updates.

Later patches will integrate this with the crtc helpers so that full
atomic updates are possible. We also need a pile of helpers to aid
drivers in transitioning from the legacy world to the shiny new atomic
age. Finally we need helpers to implement legacy ioctls on top of the
atomic interface.

The design of the overall helpers<->driver interaction is fairly
simple, but has an unfortunate large interface:

- We have ->atomic_check callbacks for crtcs and planes. The idea is
  that connectors don't need any checking, and if they do they can
  adjust the relevant crtc driver-private state. So no connector hooks
  should be needed. Also the crtc helpers integration will do the
  ->best_encoder checks, so no need for that.

- Framebuffer pinning needs to be done before we can commit to the hw
  state. This is especially important for async updates where we must
  pin all buffers before returning to userspace, so that really only
  hw failures can happen in the asynchronous worker.

  Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources
  management.

- The actual atomic plane commit can't fail (except hw woes), so has
  void return type. It has three stages:
  1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can
     use this to unset the GO bit or similar latches to prevent plane
     updates.
  2. Update plane state by looping over all changed planes and calling
     plane->atomic_update. Presuming the hardware is sane and has GO
     bits drivers can simply bash the state into the hardware in this
     function. Other drivers might use this to precompute hw state for
     the final step.
  3. Finally latch the update for the next vblank with
     crtc->atomic_flush. Note that this function doesn't need to wait
     for the vblank to happen even for the synchronous case.

v2: Clear drm_<obj>_state->state to NULL when swapping in state.

v3: Add TODO that we don't short-circuit plane updates for now. Likely
no one will care.

v4: Squash in a bit of polish that somehow landed in the wrong (later)
patche.

v5: Integrate atomic functions into the drm docbook and fixup the
kerneldoc.

v6: Fixup fixup patch squashing fumble.

v7: Don't touch the legacy plane state plane->fb and plane->crtc. This
is only used by the legacy ioctl code in the drm core, and that code
already takes care of updating the pointers in all relevant cases.
This is in stark contrast to connector->encoder->crtc links on the
modeset side, which we still need to set since the core doesn't touch
them.

Also some more kerneldoc polish.

v8: Drop outdated comment.

v9: Handle the state->state pointer correctly: Only clearing the
->state pointer when assigning the state to the kms object isn't good
enough. We also need to re-link the swapped out state into the
drm_atomic_state structure.

v10: Shuffle the misplaced docbook template hunk around that Sean spotted.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>