- 23 10月, 2012 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1611) updates the USB documentation and kerneldoc to give a more precise meaning for the URB_ISO_ASAP flag and to explain more of the details of scheduling for isochronous URBs. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 10月, 2012 3 次提交
-
-
由 Alan Stern 提交于
This patch (as1610) replaces multiplication and divison operations in ehci-hcd's isochronous scheduling code with a bit-mask operation, taking advantage of the fact that isochronous periods are always powers of 2. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1609) changes the way ehci-hcd uses the "Isochronous Scheduling Threshold" in its calculations. Until now the code has ignored the threshold except for certain Intel PCI-based controllers. This violates the EHCI spec. The new code takes the threshold into account always, removing the need for the fs_i_thresh quirk flag. In addition it implements the "full frame cache" setting more efficiently, moving forward only as far as the next frame boundary instead of always moving forward 8 microframes. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1608) reworks the logic used by ehci-hcd for scheduling isochronous transfers. Now the modular calculations are all based on a window that starts at the last frame scanned for isochronous completions. No transfer descriptors for any earlier frames can possibly remain on the schedule, so there can be no confusion from schedule wrap-around. This removes the need for a "slop" region of arbitrary size. There's no need to check for URBs that are longer than the schedule length. With the old code they could throw things off by wrapping around and appearing to end in the near future rather than the distant future. Now such confusion isn't possible, and the existing test for submissions that extend too far into the future will also catch those that exceed the schedule length. (But there still has to be an initial test to handle the case where the schedule already extends as far into the future as possible.) Delays caused by IRQ latency won't confuse the algorithm unless they are ridiculously long (over 250 ms); they will merely reduce how far into the future new transfers can be scheduled. A few people have reported problems caused by delays of 50 ms or so. Now instead of failing completely, isochronous transfers will experience a brief glitch and then continue normally. (Whether this is truly a good thing is debatable. A latency as large as 50 ms generally indicates a bug is present, and complete failure of audio or video transfers draws people's attention pretty vividly. Making the transfers more robust also makes it easier for such bugs to remain undetected.) Finally, ehci->next_frame is renamed to ehci->last_iso_frame, because that better describes what it is: the last frame to have been scanned for isochronous completions. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 10月, 2012 4 次提交
-
-
由 Fengguang Wu 提交于
Fix this build error: drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init' arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Cc: Bernhard Walle <bwalle@suse.de> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Commit cb6b6df1 ("xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches.") added the xen_strict_xenbus_quirk() function with an old K&R-style declaration without proper typing, causing gcc to rightly complain: drivers/xen/xenbus/xenbus_xs.c:628:13: warning: function declaration isn’t a prototype [-Wstrict-prototypes] because we really don't live in caves using stone-age tools any more, and the kernel has always used properly typed ANSI C function declarations. So if a function doesn't take arguments, we tell the compiler so explicitly by adding the proper "void" in the prototype. I'm sure there are tons of other examples of this kind of stuff in the tree, but this is the one that hits my workstation config, so.. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Collins 提交于
ehci_fsl_setup_phy is supposed to return an int, but had a void return value in the case of controller_ver being invalid. Introduced by commit 3735ba8d ("powerpc/usb: fix bug of CPU hang when missing USB PHY clock"), which missed one return. Signed-off-by: NBen Collins <ben.c@servergy.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 10月, 2012 29 次提交
-
-
由 Bjørn Mork 提交于
Cc: <stable@vger.kernel.org> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
Based on information from the ZTE Windows drivers. Cc: <stable@vger.kernel.org> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexis R. Cortes 提交于
This minor change adds a new system to which the "Fix Compliance Mode on SN65LVPE502CP Hardware" patch has to be applied also. System added: Vendor: Hewlett-Packard. System Model: Z1 Signed-off-by: NAlexis R. Cortes <alexis.cortes@ti.com> Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make sure port data is initialised before creating sysfs attributes to avoid a race. A recent patch ("USB: io_ti: fix port-data memory leak") got the sysfs-attribute creation and port-data initialisation ordering wrong. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make sure sysfs attributes are created at port probe. A recent patch ("USB: iuu_phoenix: fix port-data memory leak") removed the sysfs-attribute creation by mistake. Reported-by: NYuanhan Liu <yuanhan.liu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
alloc_tty_driver was always assumed to succeed. Add code to check the return value and return -ENOMEM if alloc_tty_driver fails. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
register_proc_table and unregister_proc_table didn't deal with the possibility that the *table pointer could be NULL. Check for this and return if table is NULL. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kim Phillips 提交于
drivers/of/platform.c:110:59: warning: incorrect type in argument 2 (different base types) drivers/of/platform.c:110:59: expected restricted __be32 const [usertype] *addr drivers/of/platform.c:110:59: got unsigned int const [usertype] *[assigned] reg Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Kim Phillips 提交于
drivers/of/irq.c:195:57: warning: restricted __be32 degrades to integer drivers/of/irq.c:196:51: warning: restricted __be32 degrades to integer drivers/of/irq.c:199:57: warning: restricted __be32 degrades to integer drivers/of/irq.c:201:58: warning: restricted __be32 degrades to integer drivers/of/irq.c:470:37: warning: incorrect type in assignment (different modifiers) drivers/of/irq.c:470:37: expected int ( *[usertype] irq_init_cb )( ... ) drivers/of/irq.c:470:37: got void const *const data drivers/of/irq.c:96:5: error: symbol 'of_irq_map_raw' redeclared with different type (originally declared at include/linux/of_irq.h:61) - incompatible argument 2 (different base types) drivers/of/of_pci_irq.c:91:40: warning: incorrect type in argument 2 (different base types) drivers/of/of_pci_irq.c:91:40: expected unsigned int const [usertype] *intspec drivers/of/of_pci_irq.c:91:40: got restricted __be32 *<noident> drivers/of/of_pci_irq.c:91:53: warning: incorrect type in argument 4 (different base types) drivers/of/of_pci_irq.c:91:53: expected unsigned int const [usertype] *addr drivers/of/of_pci_irq.c:91:53: got restricted __be32 *<noident> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Kim Phillips 提交于
drivers/of/address.c:66:29: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:66:29: expected restricted __be32 const [usertype] *cell drivers/of/address.c:66:29: got unsigned int [usertype] *addr drivers/of/address.c:87:32: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:87:32: expected restricted __be32 const [usertype] *cell drivers/of/address.c:87:32: got unsigned int [usertype] *addr drivers/of/address.c:91:30: warning: incorrect type in assignment (different base types) drivers/of/address.c:91:30: expected unsigned int [unsigned] [usertype] <noident> drivers/of/address.c:91:30: got restricted __be32 [usertype] <noident> drivers/of/address.c:92:22: warning: incorrect type in assignment (different base types) drivers/of/address.c:92:22: expected unsigned int [unsigned] [usertype] <noident> drivers/of/address.c:92:22: got restricted __be32 [usertype] <noident> drivers/of/address.c:147:35: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:147:35: expected restricted __be32 const [usertype] *addr drivers/of/address.c:147:35: got unsigned int [usertype] *addr drivers/of/address.c:157:34: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:157:34: expected restricted __be32 const [usertype] *cell drivers/of/address.c:157:34: got unsigned int [usertype] * drivers/of/address.c:256:29: warning: restricted __be32 degrades to integer drivers/of/address.c:256:36: warning: restricted __be32 degrades to integer drivers/of/address.c:262:34: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:262:34: expected restricted __be32 const [usertype] *cell drivers/of/address.c:262:34: got unsigned int [usertype] * drivers/of/address.c:372:41: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:372:41: expected restricted __be32 const [usertype] *cell drivers/of/address.c:372:41: got unsigned int [usertype] *addr drivers/of/address.c:395:53: warning: incorrect type in argument 2 (different base types) drivers/of/address.c:395:53: expected restricted __be32 const [usertype] *addr drivers/of/address.c:395:53: got unsigned int [usertype] *addr drivers/of/address.c:443:50: warning: incorrect type in argument 2 (different base types) drivers/of/address.c:443:50: expected restricted __be32 const [usertype] *addr drivers/of/address.c:443:50: got unsigned int *<noident> drivers/of/address.c:455:49: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:455:49: expected restricted __be32 const [usertype] *cell drivers/of/address.c:455:49: got unsigned int *<noident> drivers/of/address.c:480:60: warning: incorrect type in argument 2 (different base types) drivers/of/address.c:480:60: expected restricted __be32 const [usertype] *addr drivers/of/address.c:480:60: got unsigned int *<noident> drivers/of/address.c:412:5: warning: symbol '__of_translate_address' was not declared. Should it be static? drivers/of/address.c:520:14: error: symbol 'of_get_address' redeclared with different type (originally declared at include/linux/of_address.h:22) - different base types Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nicolas Boullis 提交于
The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by: NNicolas Boullis <nboullis@debian.org> Acked-by: NOliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tony Prisk 提交于
Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on arch-vt8500 when using devicetree. Without this patch, arch-vt8500 cannot detect ehci attached devices. Signed-off-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tony Prisk 提交于
Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on platforms using devicetree. Without this patch, arch-vt8500 cannot detect uhci attached devices. Signed-off-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ming Lei 提交于
If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: NMing Lei <ming.lei@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Henrik Rydberg 提交于
The handling of large output bulk transfers is broken; the same user page is read over and over again. Fixed with this patch. Cc: stable <stable@vger.kernel.org> Acked-by: NPeter Stuge <peter@stuge.se> Acked-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mauro Carvalho Chehab 提交于
This option is a merge of both analog TV and DVB CUSTOMISE. At the merge, the dependencies were not done right: the menu currently appears only for analog TV. It should also be opened for digital TV. As there are other I2C devices there (flash devices, etc) that aren't related to either one, it is better to make it generic enough to open for all media devices with video. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@ingics.com> Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 17 10月, 2012 3 次提交
-
-
由 Arnd Bergmann 提交于
There is a subtle difference between dma_transfer_direction and dma_data_direction: the former is used by the dmaengine framework, while the latter is used by the dma-mapping API. Although the purpose is comparable, the actual values are different and must not be mixed. In this case, the driver just wants to use dma_transfer_direction. Without this patch, building s3c6400_defconfig results in: drivers/spi/spi-s3c64xx.c: In function 's3c64xx_spi_dmacb': drivers/spi/spi-s3c64xx.c:239:21: warning: comparison between 'enum dma_data_direction' and 'enum dma_transfer_direction' [-Wenum-compare] As pointed out by Kukjin Kim, this also changes the use of constants from DMA_FROM_DEVICE/DMA_TO_DEVICE to DMA_DEV_TO_MEM/DMA_MEM_TO_DEV. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net
-
由 Corey Minyard 提交于
The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by: NSteven Hsieh <sshsieh@broadcom.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
There was a spot where the compiler couldn't tell some variables would be set. So initialize them to make the warning go away. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-