Impact: cleanup

Unify and demacro pte_none.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Impact: fix potential miscompile (currently believed non-manifest)

As the comment explains, the VBE DDC call can clobber any register.
Tell the compiler about that fact.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In Linus' current -git the cpumask member is now a pointer.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This kernel symbol provides a way for drivers to switch on alternate
function for a certain GPIO pin. Turning it off is done implicitly when
changing the GPIO direction, as that would be fixed when using the given
pin als alternate function.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove the {set,get}_434_reg() prototypes, as the functions have been
removed. Also move the prototypes for {get,set}_latch_u5() to the correct
place.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As rb532_dev3_ctl_res is not used by any platform device, it can be dropped
when not used for holding the physical address of the device 3 controller.

Also a size of one byte should suffice when ioremapping the physical
address mentioned above, as only a single byte is being read from and
written to it.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These kernel symbols are unused. Also, since dev3 init has been moved to
devices.c, set_434_reg() breaks compiling as it uses dev3.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This code doesn't belong to gpio.c, as it's completely unrelated to
GPIO. As dev1 and dev2 init code is in devices.c, it seems to be a more
adequate place.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The data to be written is just a byte, so use writeb instead of writel.
Also, dev3.base contains the address, not the data so referencing here
is wrong.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This register just contains the address of the actual resource, so
initialisation has to be the same as cf_slot0_res and nand_slot0_res.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As the korina ethernet driver uses platform_get_drvdata() to extract the
driver specific data from the platform device, driver_data has to be
used here.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Auto-detection works just fine, so use it instead of specifying the type
manually. Also define a platform device for the uart, as suggested by
David Daney.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As the pata-rb532-cf driver calls gpio_direction_input(), the calls to
rb532_gpio_set_func() and rb532_gpio_direction_input() are not needed since
the alternate function is automatically being disabled when changing the
GPIO pin direction.
The later two calls to rb532_gpio_set_{ilevel,istat}() are implicitly being
done by the IRQ initialisation of pata-rb532-cf.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When a driver calls gpio_set_direction_{input,output}(), it obviously
doesn't want the alternate function for that pin to be active (as the
direction would not matter in that case). This patch ensures alternate
function is disabled when the direction is being changed.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Interrupt Group 4 mapps the GPIO pins enabled as interrupt sources;
add defines to make this clear when addressing them later in code.

The mapped GPIOs support triggering on either level high or low. To
achieve this, the set_type() function calls rb532_gpio_set_ilevel() for
interrupts of the above mentioned group.

As there is no way to alter the triggering characteristics of the other
interrupts, accept level triggering on status high only. (This is just a
guess; but as the system boots fine and interrupt-driven devices (e.g.
serial console) work with no implications, it seems to be right.)

To clear a GPIO mapped IRQ, the source has to be cleared (i.e., the
interrupt status bit of the corresponding GPIO pin). This is done inside
rb532_disable_irq().

After applying these changes I could undo most of my former "fixes" to
pata-rb532-cf. Particularly all interrupt handling can be done
generically via set_irq_type() as it was before.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The code is rather based on trial-and-error than knowledge. Verified Via
Rhine functionality in PIO as well as MMIO mode.

[Looks sane -- Ralf]
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Tested-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The algorithm works unconditionally. If bitval is one, the first line is
a no op and the second line sets the bit at offset position. Vice versa,
if bitval is zero, the first line clears the bit at offset position and
the second line is a no op.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The previous definition inadvertently omits Octeon which currently is
treated as an architecture variant separate from MIPS32 and MIPS64.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If a context switch occurred between the watch exception and reading the
watch registers, it would be possible for the new process to corrupt their
state.  Enabling interrupts only after the watch registers are read avoids
this race.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes the ptrace ABI for watch registers, and should allow 64bit
kernels to use the watch register support.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add platform support to use rtc-tx4939 driver.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The special IP27 DMA code selected by DMA_IP27 has been removed a while
ago turning DMA_IP27 into almost a nop.  Also fixup the broken logic of
its last users memcpy.S and memcpy-inatomic.s.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

And while at it, convert all functions from macros to inline functions
for sanity.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This shaves of 1912 bytes of an IP27 defconfig kernel and avoids
unexpected overflow behaviour in atomic_sub_if_positive.  Apply the same
changes to the atomic64_* functions for consistency.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Original commit 1c0fe6e3.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

See discussion e9c3a7c20901051031y528d0d31r18d44c5096c59e0@mail.gmail.com.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

fix the following 'make headers_check' warnings:

  usr/include/asm/swab.h:4: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/swab.h:7: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warning:

  usr/include/asm/sigcontext32.h:20: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warnings:

  usr/include/asm/sigcontext.h:5: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/sigcontext.h:24: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warnings:

  usr/include/asm/ptrace-abi.h:86: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/ptrace-abi.h:93: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warning:

  usr/include/asm/mtrr.h:61: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warnings:

  usr/include/asm/mce.h:7: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/mce.h:29: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warnings:

  usr/include/asm/kvm.h:9: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm/kvm.h:16: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warning:

  usr/include/asm/e820.h:44: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

Move DMA-mapping.txt to Documentation/PCI/.

DMA-mapping.txt was supposed to be moved from Documentation/ to
Documentation/PCI/.  The 00-INDEX files in those two directories
were updated, along with a few other text files, but the file
itself somehow escaped being moved, so move it and update more
text files and source files with its new location.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
cc:	Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The commit "alpha: teach the compiler that BUG doesn't return"
(ed6b9b97) moved the asm code into inline
function which takes __FILE__ and __LINE__ as arguments.  This violates
asm constrains there ("i" - an immediate operand with constant value), so
that compile may result in warning or error, depending on compiler
version.

Just adding an infinite loop to the BUG() is sufficient.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- jensen build: fix conflicting declarations for pci_alloc_consistent()
  and undefined virt_to_phys();

- SMP: arch/alpha/kernel/smp.c:124: warning: passing argument 2
       of '__cpu_test_and_set' discards qualifiers from pointer target type
  Interestingly, this only happens with gcc-4.2; gcc <= 4.1 and gcc-4.3
  are OK. Fixed with extra assignment.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>