Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

They fixed the hardware so that ECC doesn't fail on reading an empty
block.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Fixes http://dev.laptop.org/ticket/237Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Being a value which isn't in the table is a case we explicitly check for
in the caller. Don't BUG_ON() because it does actually happen in
practice.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Ditch the separate oobrbuf and oobwbuf fields from the chip buffers,
and use only a single buffer immediately after the data. This accommodates
NAND controllers such as the OLPC CAFÉ chip, which can't do scatter/gather
DMA so needs the OOB buffer to be contiguous with the data, for both read
and write.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

As flash cannot do 0->1 bit transitions when programming, do not do this in
the simulator too. This makes nandsim able to accept subpage writes.
Signed-off-by: NArtem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

During some testing with several samsung s3c24xx based
devices it was discovered that often the
cfi_cmdset_0001.c would not leave the chip in
read-array mode on suspend. this is an issue if the
same flash chip is used for the bootloader that needs
to be read on resume.
Signed-off-by: NDavid Anders <danders@amltd.com>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NArtem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Removes line break after return type in function definitions, to be
consistent with the Linux coding style.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

For page wise allocation, an array of flash page pointers is allocated
during initialization. The flash pages are themselves allocated when a
write occurs to the page. The flash pages are deallocated when they
are erased.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This patch removes code that does chip mapping. The chip mapping code
is no longer used.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This patch has removed ITE 8172G and Globespan IVR MTD support.
These boards support have already been removed.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: NRalf Bächle <ralf@linux-mips.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

1. The ECCGETLAYOUT ioctl copy_to_user() call has a superfluous '&'
causing the resulting information to be garbage rather than the intended
mtd->ecclayout.

2. The MEMGETOOBSEL misses copying mtd->ecclayout->eccbytes so the
resulting field of the returned structure contains garbage.
Signed-off-by: NRicard Wanderlöf <ricardw@axis.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This version only differs from version posted by Savin Zlobec (20 Jun
2006) in that the AT91RM9200-specific chip-select / bus setup code has
been moved from the at91_nand.c driver into the processor-specific file.

From: Savin Zlobec <savin@epico.si>
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Fairly self explanatory.  Keep a reference initially, drop it when we free up
the driver resources.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Add MTD map driver for BIOS flash chips connected to the Intel ESB2
southbridge.

[akpm@osdl.org: coding-style fixes, build fix]
Signed-off-by: NRyan Jackson <rjackson@lnxi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Add chip driver and JEDEC probe support for the SST 49LF040B flash chip.
Signed-off-by: NRyan Jackson <rjackson@lnxi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The 2 bits controlling the window size are often set to allow reading the
BIOS, but too small to allow writing, since the lock registers are 4MiB
lower in the address space than the data.  This is intended to prevent
flashing the bios, perhaps accidentally.

The bits are 6 and 7.  If both bits are set, it is a 5MiB window. If only
the 7 Bit is set, it is a 4MiB window.  Otherwise, it is a 64KiB window.

This parameter allows the driver to override the BIOS settings.
Signed-off-by: NRyan Jackson <rjackson@lnxi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This was apparently missed by the move to the generic IRQ code.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use grep instead of make during interface changes.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit 4596c75c as
requested by Olaf Hering. It causes compile errors, and says Olaf:

  "This change is also wrong, the autoloading works perfect with 2.6.18,
   no need to add random PCI ids.

   See commit a0245f7a, platform devices
   have now a modalias entry in sysfs.  The network card is not a PCI
   device."
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a size check in smi_data_write to prevent possible wrapping problems
with large pos values when calling smi_data_buf_realloc on 32-bit.
Signed-off-by: NDoug Warzecha <Douglas_Warzecha@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These returns should be negative, like the others in this function.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.
Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I wrote a patch to avoid redundant memory hot-add call at boot time.  This
was cause of strange fail message of memory hotplug like "ACPI: add_memory
failed".  Memory is recognized by early boot code with EFI/E820.

But, if DSDT describes memory devices for them, then hot-add code is called
for already recognized memory, and it shows fail messages with -EEXIST.
So, sys admin will misunderstand this message as something wrong by it.

This patch avoids them by preventing redundant hot-add call until
completion of driver initialization.

[akpm@osdl.org: cleanups]
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I suppose this message seems quite useless except debugging.  It just shows
"Hotplug Mem Device".  System admin can't know anything by this message.
So, I would like to change it to KERN_DEBUG.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch breaks C-state discovery on my IBM IntelliStation Z30 because
the return value of acpi_processor_get_power_info_fadt is not assigned to
"result" in the case that acpi_processor_get_power_info_cst returns
-ENODEV.  Thus, if ACPI provides C-state data via the FADT and not _CST (as
is the case on this machine), we incorrectly exit the function with -ENODEV
after reading the FADT.  The attached patch sets the value of result so
that we don't exit early.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Acked-by: N"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Acked-by: N"Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix typo (repeated) in serial Kconfig.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Separate out the concept of "queue congestion" from "backing-dev congestion".
Congestion is a backing-dev concept, not a queue concept.

The blk_* congestion functions are retained, as wrappers around the core
backing-dev congestion functions.

This proper layering is needed so that NFS can cleanly use the congestion
functions, and so that CONFIG_BLOCK=n actually links.

Cc: "Thomas Maier" <balagi@justmail.de>
Cc: "Jens Axboe" <jens.axboe@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Howells <dhowells@redhat.com>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When rebooting with netconsole over e100, the driver shutdown code would
deadlock with netpoll.  Reduce shutdown code to a bare minimum while retaining
WoL and suspend functionality.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The device id for the Nokia DTL-4 PCMCIA card was missing. This patch
adds it back to the list of supported devices.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds the vendor and product id of the ANYCOM Bluetooth
USB-200 and USB-250 dongles and sets a flag to send HCI_Reset as
the first command.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org