- 10 2月, 2015 1 次提交
-
-
由 Michal Simek 提交于
dts/Makefile is called only for simpleImage target which is causing that *.dtb are not removed. This patch fix it. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 08 1月, 2015 9 次提交
-
-
由 Michael S. Tsirkin 提交于
Align using tabs to make code prettier. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michael S. Tsirkin 提交于
virtio wants to read bitwise types from userspace using get_user. At the moment this triggers sparse errors, since the value is passed through an integer. Fix that up using __force. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Soren Brinkmann 提交于
A message was using pr_info level output for a message including "ERROR" which is not really a fatal error. Remove the 'ERROR' from that message, use pr_warn loglevel and add the function name to the output to give users a chance to find the culprit in case the warning triggers. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Soren Brinkmann 提交于
Avoid funky casts and arithmetic. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Soren Brinkmann 提交于
Just pass on error codes instead of overriding them. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add missing target architectures - virtex7, ultrascale virtex and ultrascale kintex. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Erico Nunes 提交于
PVR version code was missing in the cpu_ver_lookup table for the following versions: 8.50.b 8.50.c 9.2 9.3 This caused /proc/cpuinfo to display "CPU-Ver: Unknown" for these versions. This was detected and the patch tested with MicroBlaze version 8.50.c. The other codes were taken from the Xilinx MicroBlaze Processor Reference Guides UG081 (v14.7) and UG984 (v2014.1). Signed-off-by: NErico Nunes <nunes.erico@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
This patch removes this warning: arch/microblaze/kernel/signal.c: In function 'setup_rt_frame': arch/microblaze/kernel/signal.c:177:3: warning: signed and unsigned type in conditional expression [-Wsign-compare] Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
The patch removes warnings: arch/microblaze/kernel/cpu/cache.c:146:14: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 05 1月, 2015 10 次提交
-
-
由 Michal Simek 提交于
Compare the same types together. Compilation warnings: arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c: In function 'set_cpuinfo_pvr_full': arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c:47:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c:52:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c:57:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c:94:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/cpu/cpuinfo-static.c: In function 'set_cpuinfo_static': arch/microblaze/kernel/cpu/cpuinfo-static.c:40:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
This patch removes warnings reported by W=1: arch/microblaze/kernel/kgdb.c: In function 'pt_regs_to_gdb_regs': arch/microblaze/kernel/kgdb.c:43:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/kgdb.c:51:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/kgdb.c: In function 'gdb_regs_to_pt_regs': arch/microblaze/kernel/kgdb.c:77:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs': arch/microblaze/kernel/kgdb.c:99:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] arch/microblaze/kernel/kgdb.c:103:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
With compilers which follow the C99 standard (like modern versions of gcc and clang), "extern inline" does the opposite thing from older versions of gcc (emits code for an externally linkable version of the inline function). "static inline" does the intended behavior in all cases instead. Description taken from: "staging, rtl8192e, LLVMLinux: Change extern inline to static inline" (sha1: 6d91857d) The patch removes compilation warnings W=1: ./arch/microblaze/include/asm/delay.h:18:20: warning: no previous prototype for '__delay' [-Wmissing-prototypes] extern inline void __delay(unsigned long loops) ./arch/microblaze/include/asm/delay.h:46:20: warning: no previous prototype for '__udelay' [-Wmissing-prototypes] extern inline void __udelay(unsigned int x) ./arch/microblaze/include/asm/pgalloc.h:63:22: warning: no previous prototype for 'get_pgd_slow' [-Wmissing-prototypes] extern inline pgd_t *get_pgd_slow(void) ./arch/microblaze/include/asm/pgalloc.h:73:22: warning: no previous prototype for 'get_pgd_fast' [-Wmissing-prototypes] extern inline pgd_t *get_pgd_fast(void) ./arch/microblaze/include/asm/pgalloc.h:87:20: warning: no previous prototype for 'free_pgd_fast' [-Wmissing-prototypes] extern inline void free_pgd_fast(pgd_t *pgd) ./arch/microblaze/include/asm/pgalloc.h:94:20: warning: no previous prototype for 'free_pgd_slow' [-Wmissing-prototypes] extern inline void free_pgd_slow(pgd_t *pgd) ./arch/microblaze/include/asm/pgalloc.h:149:20: warning: no previous prototype for 'pte_free_fast' [-Wmissing-prototypes] extern inline void pte_free_fast(pte_t *pte) ./arch/microblaze/include/asm/pgalloc.h:156:20: warning: no previous prototype for 'pte_free_kernel' [-Wmissing-prototypes] extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) ./arch/microblaze/include/asm/pgalloc.h:161:20: warning: no previous prototype for 'pte_free_slow' [-Wmissing-prototypes] extern inline void pte_free_slow(struct page *ptepage) Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
It is used only locally in unwind.c. The patch removes warning: arch/microblaze/kernel/unwind.c:62:13: warning: no previous prototype for 'get_frame_size' [-Wmissing-prototypes] inline long get_frame_size(unsigned long instr) Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Registers are not signed types. The patch removes warnings: arch/microblaze/kernel/ptrace.c: In function 'do_syscall_trace_enter': arch/microblaze/kernel/ptrace.c:152:14: warning: signed and unsigned type in conditional expression [-Wsign-compare] return ret ?: regs->r12; Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
This patch removes the warning: arch/microblaze/kernel/kgdb.c:81:6: warning: no previous prototype for 'microblaze_kgdb_break' [-Wmissing-prototypes] Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Completely unused header by this file. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
of_parse_dma_window is completely unused. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add new execveat syscall. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
The difference between microblaze and default version in linux/linkage.h is just value stored in the padding bytes which was 0 and in generic is 0x90. Different value shouldn't have any effect. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 29 12月, 2014 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "The important fixes are for two bugs introduced by the merge window. On top of this, add a couple of WARN_ONs and stop spamming dmesg on pretty much every boot of a virtual machine" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: warn on more invariant breakage kvm: fix sorting of memslots with base_gfn == 0 kvm: x86: drop severity of "generation wraparound" message kvm: x86: vmx: reorder some msr writing
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fix from Al Viro: "An embarrassing bug in lustre patches from this cycle ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] braino in "lustre: use is_root_inode()"
-
- 28 12月, 2014 5 次提交
-
-
由 Paolo Bonzini 提交于
Modifying a non-existent slot is not allowed. Also check that the first loop doesn't move a deleted slot beyond the used part of the mslots array. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Before commit 0e60b079 (kvm: change memslot sorting rule from size to GFN, 2014-12-01), the memslots' sorting key was npages, meaning that a valid memslot couldn't have its sorting key equal to zero. On the other hand, a valid memslot can have base_gfn == 0, and invalid memslots are identified by base_gfn == npages == 0. Because of this, commit 0e60b079 broke the invariant that invalid memslots are at the end of the mslots array. When a memslot with base_gfn == 0 was created, any invalid memslot before it were left in place. This can be fixed by changing the insertion to use a ">=" comparison instead of "<=", but some care is needed to avoid breaking the case of deleting a memslot; see the comment in update_memslots. Thanks to Tiejun Chen for posting an initial patch for this bug. Reported-by: NJamie Heilman <jamie@audible.transient.net> Reported-by: NAndy Lutomirski <luto@amacapital.net> Tested-by: NJamie Heilman <jamie@audible.transient.net> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Just a couple of fixes for the new Intel Skylake HD-audio support" * tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: apply the Seperate stream_tag for Skylake ALSA: hda_controller: Separate stream_tag for input and output streams.
-
由 Paolo Bonzini 提交于
Since most virtual machines raise this message once, it is a bit annoying. Make it KERN_DEBUG severity. Cc: stable@vger.kernel.org Fixes: 7a2e8aafSigned-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tiejun Chen 提交于
The commit 34a1cd60, "x86: vmx: move some vmx setting from vmx_init() to hardware_setup()", tried to refactor some codes specific to vmx hardware setting into hardware_setup(), but some msr writing should depend on our previous setting condition like enable_apicv, enable_ept and so on. Reported-by: NJamie Heilman <jamie@audible.transient.net> Tested-by: NJamie Heilman <jamie@audible.transient.net> Signed-off-by: NTiejun Chen <tiejun.chen@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 27 12月, 2014 3 次提交
-
-
由 Al Viro 提交于
In one of the places (ll_md_blocking_ast()) we had open-coded !is_root_inode(inode) and replaced it with is_root_inode(inode). See the last chunk of f76c23: - inode != inode->i_sb->s_root->d_inode) + is_root_inode(inode)) should've been + !is_root_inode(inode)) obviously... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc build fix from Helge Deller: "This unbreaks the kernel compilation on parisc with gcc-4.9" * 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix out-of-register compiler error in ldcw inline assembler function
-
由 John David Anglin 提交于
The __ldcw macro has a problem when its argument needs to be reloaded from memory. The output memory operand and the input register operand both need to be reloaded using a register in class R1_REGS when generating 64-bit code. This fails because there's only a single register in the class. Instead, use a memory clobber. This also makes the __ldcw macro a compiler memory barrier. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: NHelge Deller <deller@gmx.de>
-
- 26 12月, 2014 4 次提交
-
-
由 Libin Yang 提交于
The total stream number of Skylake's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: NLibin Yang <libin.yang@intel.com> Reviewed-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rafal Redzimski 提交于
Implemented separate stream_tag assignment for input and output streams. According to hda specification stream tag must be unique throughout the input streams group, however an output stream might use a stream tag which is already in use by an input stream. This change is necessary to support HW which provides a total of more than 15 stream DMA engines which with legacy implementation causes an overflow on SDxCTL.STRM field (and the whole SDxCTL register) and as a result usage of Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller. Signed-off-by: NRafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: NJayachandran B <jayachandran.b@intel.com> Signed-off-by: NLibin Yang <libin.yang@intel.com> Reviewed-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Xmas fixes pull: core: one atomic fix, revert the WARN_ON dumb buffers patch. agp: fixup Dave J. nouveau: fix 3.18 regression for old userspace tegra fixes: vblank and iommu fixes amdkfd: fix bugs shown by testing with userspace, init apertures once msm: hdmi fixes and cleanup i915: misc fixes There is also a link ordering fix that I've asked to be cc'ed to you, putting iommu before gpu, it fixes an issue with amdkfd when things are all in the kernel, but I didn't like sending it via my tree without discussion. I'll probably be a bit on/off for a few weeks with pulls now, due to holidays and LCA, so don't be surprised if stuff gets a bit backed up, and things end up a bit large due to lag" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2" agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags nouveau: bring back legacy mmap handler drm/msm/hdmi: rework HDMI IRQ handler drm/msm/hdmi: enable regulators before clocks to avoid warnings drm/msm/mdp5: update irqs on crtc<->encoder link change drm/msm: block incoming update on pending updates drm/atomic: fix potential null ptr on plane enable drm/msm: Deletion of unnecessary checks before the function call "release_firmware" drm/msm: Deletion of unnecessary checks before two function calls drm/tegra: dc: Select root window for event dispatch drm/tegra: gem: Use the proper size for GEM objects drm/tegra: gem: Flush buffer objects upon allocation drm/tegra: dc: Fix a potential race on page-flip completion drm/tegra: dc: Consistently use the same pipe drm/irq: Add drm_crtc_vblank_count() drm/irq: Add drm_crtc_handle_vblank() drm/irq: Add drm_crtc_send_vblank_event() drm/i915: Disable PSMI sleep messages on all rings around context switches drm/i915: Force the CS stall for invalidate flushes ...
-
git://git.code.sf.net/p/openipmi/linux-ipmi由 Linus Torvalds 提交于
Pull ipmi driver bugfixes from Corey Minyard: "Fix two bugs: One that lockdep turned up, I didn't go far enough with cleanup of attributes for IPMI. This has been there a long time; my previous fix of this didn't fix all the attributes. One fix for some arches that need an explicit linux/ctype.h for isspace()" * tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile issue with isspace() ipmi: Finish cleanup of BMC attributes
-
- 24 12月, 2014 5 次提交
-
-
由 Dave Airlie 提交于
This reverts commit 355a7018. This had some bad side effects under normal operation, and should have been dropped earlier. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~gabbayo/linux由 Dave Airlie 提交于
- Display MEC fw version in topology. Without this, the HSA userspace stack is broken. - Init apertures information only once per process * tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: init aperture once per process amdkfd: Display MEC fw version in topology node drm/radeon: Add implementation of get_fw_version drm/amd: Add get_fw_version to kfd-->kgd interface
-
git://git.infradead.org/users/pcmoore/audit由 Linus Torvalds 提交于
Pull audit fixes from Paul Moore: "Four patches to fix various problems with the audit subsystem, all are fairly small and straightforward. One patch fixes a problem where we weren't using the correct gfp allocation flags (GFP_KERNEL regardless of context, oops), one patch fixes a problem with old userspace tools (this was broken for a while), one patch fixes a problem where we weren't recording pathnames correctly, and one fixes a problem with PID based filters. In general I don't think there is anything controversial with this patchset, and it fixes some rather unfortunate bugs; the allocation flag one can be particularly scary looking for users" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: restore AUDIT_LOGINUID unset ABI audit: correctly record file names with different path name types audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb audit: don't attempt to lookup PIDs when changing PID filtering audit rules
-
由 Richard Guy Briggs 提交于
A regression was caused by commit 780a7654: audit: Make testing for a valid loginuid explicit. (which in turn attempted to fix a regression caused by e1760bd5) When audit_krule_to_data() fills in the rules to get a listing, there was a missing clause to convert back from AUDIT_LOGINUID_SET to AUDIT_LOGINUID. This broke userspace by not returning the same information that was sent and expected. The rule: auditctl -a exit,never -F auid=-1 gives: auditctl -l LIST_RULES: exit,never f24=0 syscall=all when it should give: LIST_RULES: exit,never auid=-1 (0xffffffff) syscall=all Tag it so that it is reported the same way it was set. Create a new private flags audit_krule field (pflags) to store it that won't interact with the public one from the API. Cc: stable@vger.kernel.org # v3.10-rc1+ Signed-off-by: NRichard Guy Briggs <rgb@redhat.com> Signed-off-by: NPaul Moore <pmoore@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - __cpu_suspend mm switching fix after warm boot - arch_setup_dma_ops implementation - pgd_page compilation error fix - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Add pgd_page to support RCU fast_gup arm64: defconfig: defconfig update for 3.19 arm64: kernel: fix __cpu_suspend mm switch on warm-boot arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops
-