- 22 4月, 2016 1 次提交
-
-
由 Peter Rosin 提交于
Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select op to be in terms of the i2c mux core instead of the child adapter. Tested-by: NAntti Palosaari <crope@iki.fi> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NPeter Rosin <peda@axentia.se> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 05 2月, 2016 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Instead of using the DTV properties cache directly, pass the get frontend data as an argument. For now, everything should remain the same, but the next patch will prevent get_frontend to affect the global cache. This is needed because several drivers don't care enough to only change the properties if locked. Due to that, calling G_PROPERTY before locking on those drivers will make them to never lock. Ok, those drivers are crap and should never be merged like that, but the core should not rely that the drivers would be doing the right thing. Reviewed-by: NMichael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 01 2月, 2016 1 次提交
-
-
由 Ernst Martin Witte 提交于
rtl2830_remove was calling kfree(dev) with possibly still active schedule_delayed_work(&dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: NErnst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 11 8月, 2015 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 10 6月, 2015 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
-
- 04 2月, 2015 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes] int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes] int rtl2830_update_bits(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes] int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val, ^ Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Use regmap to cover register access routines. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Own I2C locking is needed due to two special reasons: 1) Chips uses multiple register pages/banks on single I2C slave. Page is changed via I2C register access. 2) Chip offers muxed/gated I2C adapter for tuner. Gate/mux is controlled by I2C register access. Due to these reasons, I2C locking did not fit very well. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 03 2月, 2015 14 次提交
-
-
由 Antti Palosaari 提交于
Implement PID filter. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Change legacy DVBv3 read SNR to return values calculated by DVBv5 statistics. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Change legacy DVBv3 read BER to return values calculated by DVBv5 statistics. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Change legacy DVBv3 signal strength to return values calculated by DVBv5 statistics. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
DVBv5 BER. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Estimate signal strength from IF AGC. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
DVBv5 CNR. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Trivial changes proposed by checkpatch.pl and some more. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Remove internal config and use configuration values directly from the platform data. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Pass correct device for dev_foo() logging in order to print logs correctly. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
As a I2C driver struct i2c_client is top level structure representing the driver. Use it as parameter to carry all needed information for each function in order to simplify things. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Use name 'dev' for device state instance as it is more common and also one letter shorter. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Remove legacy DVB binding as all users are using I2C binding. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antti Palosaari 提交于
Convert driver to kernel I2C model. Old DVB proprietary model is still left there also. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 10 12月, 2013 1 次提交
-
-
由 Antti Palosaari 提交于
i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 03 12月, 2013 1 次提交
-
-
由 Antti Palosaari 提交于
i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 11月, 2013 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 28 10月, 2012 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
drivers/media/dvb-frontends/rtl2830.c:133:5: warning: no previous prototype for 'rtl2830_wr_reg_mask' [-Wmissing-prototypes] drivers/media/dvb-frontends/rtl2830.c:153:5: warning: no previous prototype for 'rtl2830_rd_reg_mask' [-Wmissing-prototypes] drivers/media/dvb-frontends/rtl2830.c:259:5: warning: no previous prototype for 'rtl2830_get_tune_settings' [-Wmissing-prototypes] Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 24 9月, 2012 3 次提交
-
-
由 Antti Palosaari 提交于
This optimizes few hundred bytes from data to text segment. Also remove one unused function that was commented out already. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Use .get_if_frequency() as all used tuner drivers (mt2060/qt1010/mxl5005s) supports it. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 8月, 2012 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 5月, 2012 5 次提交
-
-
由 Antti Palosaari 提交于
to prevent I/O errors... Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Reports value as a 0.1 dB. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 3月, 2012 1 次提交
-
-
由 Gianluca Gennari 提交于
Il 29/02/2012 22:30, Geert Uytterhoeven ha scritto: > http://kisskb.ellerman.id.au/kisskb/buildresult/5759200/ ERROR: > "__udivdi3" [drivers/media/dvb/frontends/rtl2830.ko] undefined! > The following patch fixed the warning on my 32 bit system. Signed-off-by: NGianluca Gennari <gennarone@gmail.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 2月, 2012 3 次提交
-
-
由 Antti Palosaari 提交于
Hardware is not accessible when device is sleeping. Preventing such IOCTLs when sleep should be job of DVB CORE... Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Implement I2C functionality according to real RTL2830 demod. Do not send register page in first byte of each I2C write, instead use logic to set page using own write when needed. Page register is physical register 0 as generally used. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-