- 14 11月, 2008 17 次提交
-
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Steve French <sfrench@samba.org> Cc: linux-cifs-client@lists.samba.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Tigran A. Aivazian <tigran@aivazian.fsnet.co.uk> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Ian Kent <raven@themaw.net> Cc: autofs@linux.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: autofs@linux.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Reviewed-by: NEric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: v9fs-developer@lists.sourceforge.net Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NKarsten Keil <kkeil@suse.de> Cc: isdn4linux@listserv.isdn4linux.de Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 12 11月, 2008 1 次提交
-
-
由 James Morris 提交于
Remove broken declarations for security_capable* functions, which were not needed anyway. Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 11 11月, 2008 9 次提交
-
-
由 Eric Paris 提交于
check when determining if a process has additional powers to override memory limits or when trying to read/write illegal file labels. Use the new noaudit call instead. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
these are not security decisions and LSMs should not record if they fall the request they should use the new has_capability_noaudit() interface so the denials will not be recorded. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
make an A or B type decision instead of a security decision. Currently this is the case at least for filesystems when deciding if a process can use the reserved 'root' blocks and for the case of things like the oom algorithm determining if processes are root processes and should be less likely to be killed. These types of security system requests should not be audited or logged since they are not really security decisions. It would be possible to solve this problem like the vm_enough_memory security check did by creating a new LSM interface and moving all of the policy into that interface but proves the needlessly bloat the LSM and provide complex indirection. This merely allows those decisions to be made where they belong and to not flood logs or printk with denials for thing that are not security decisions. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
If an invalid (large) capability is requested the capabilities system may panic as it is dereferencing an array of fixed (short) length. Its possible (and actually often happens) that the capability system accidentally stumbled into a valid memory region but it also regularly happens that it hits invalid memory and BUGs. If such an operation does get past cap_capable then the selinux system is sure to have problems as it already does a (simple) validity check and BUG. This is known to happen by the broken and buggy firegl driver. This patch cleanly checks all capable calls and BUG if a call is for an invalid capability. This will likely break the firegl driver for some situations, but it is the right thing to do. Garbage into a security system gets you killed/bugged Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NAndrew G. Morgan <morgan@kernel.org> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
actual capbilities being added/removed. This patch adds a new record type which emits the target pid and the eff, inh, and perm cap sets. example output if you audit capset syscalls would be: type=SYSCALL msg=audit(1225743140.465:76): arch=c000003e syscall=126 success=yes exit=0 a0=17f2014 a1=17f201c a2=80000000 a3=7fff2ab7f060 items=0 ppid=2160 pid=2223 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 ses=1 comm="setcap" exe="/usr/sbin/setcap" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1322] msg=audit(1225743140.465:76): pid=0 cap_pi=ffffffffffffffff cap_pp=ffffffffffffffff cap_pe=ffffffffffffffff Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
non-zero pE we will crate a new audit record which contains the entire set of known information about the executable in question, fP, fI, fE, fversion and includes the process's pE, pI, pP. Before and after the bprm capability are applied. This record type will only be emitted from execve syscalls. an example of making ping use fcaps instead of setuid: setcap "cat_net_raw+pe" /bin/ping type=SYSCALL msg=audit(1225742021.015:236): arch=c000003e syscall=59 success=yes exit=0 a0=1457f30 a1=14606b0 a2=1463940 a3=321b770a70 items=2 ppid=2929 pid=2963 auid=0 uid=500 gid=500 euid=500 suid=500 fsuid=500 egid=500 sgid=500 fsgid=500 tty=pts0 ses=3 comm="ping" exe="/bin/ping" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1321] msg=audit(1225742021.015:236): fver=2 fp=0000000000002000 fi=0000000000000000 fe=1 old_pp=0000000000000000 old_pi=0000000000000000 old_pe=0000000000000000 new_pp=0000000000002000 new_pi=0000000000000000 new_pe=0000000000002000 type=EXECVE msg=audit(1225742021.015:236): argc=2 a0="ping" a1="127.0.0.1" type=CWD msg=audit(1225742021.015:236): cwd="/home/test" type=PATH msg=audit(1225742021.015:236): item=0 name="/bin/ping" inode=49256 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ping_exec_t:s0 cap_fp=0000000000002000 cap_fe=1 cap_fver=2 type=PATH msg=audit(1225742021.015:236): item=1 name=(null) inode=507915 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ld_so_t:s0 Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
records of any file that has file capabilities set. Files which do not have fcaps set will not have different PATH records. An example audit record if you run: setcap "cap_net_admin+pie" /bin/bash /bin/bash type=SYSCALL msg=audit(1225741937.363:230): arch=c000003e syscall=59 success=yes exit=0 a0=2119230 a1=210da30 a2=20ee290 a3=8 items=2 ppid=2149 pid=2923 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 ses=3 comm="ping" exe="/bin/ping" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=EXECVE msg=audit(1225741937.363:230): argc=2 a0="ping" a1="www.google.com" type=CWD msg=audit(1225741937.363:230): cwd="/root" type=PATH msg=audit(1225741937.363:230): item=0 name="/bin/ping" inode=49256 dev=fd:00 mode=0104755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ping_exec_t:s0 cap_fp=0000000000002000 cap_fi=0000000000002000 cap_fe=1 cap_fver=2 type=PATH msg=audit(1225741937.363:230): item=1 name=(null) inode=507915 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ld_so_t:s0 Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
functions which retrieve fcaps information from disk. This information is necessary so fcaps information can be collected and recorded by the audit system. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Eric Paris 提交于
which order the argument should be in. So give an example. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 09 11月, 2008 1 次提交
-
-
由 Eric Paris 提交于
Currently when SELinux has not been updated to handle a netlink message type the operation is denied with EINVAL. This patch will leave the audit/warning message so things get fixed but if policy chose to allow unknowns this will allow the netlink operation. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 06 11月, 2008 3 次提交
-
-
由 Serge E. Hallyn 提交于
Add a no_file_caps boot option when file capabilities are compiled into the kernel (CONFIG_SECURITY_FILE_CAPABILITIES=y). This allows distributions to ship a kernel with file capabilities compiled in, without forcing users to use (and understand and trust) them. When no_file_caps is specified at boot, then when a process executes a file, any file capabilities stored with that file will not be used in the calculation of the process' new capability sets. This means that booting with the no_file_caps boot option will not be the same as booting a kernel with file capabilities compiled out - in particular a task with CAP_SETPCAP will not have any chance of passing capabilities to another task (which isn't "really" possible anyway, and which may soon by killed altogether by David Howells in any case), and it will instead be able to put new capabilities in its pI. However since fI will always be empty and pI is masked with fI, it gains the task nothing. We also support the extra prctl options, setting securebits and dropping capabilities from the per-process bounding set. The other remaining difference is that killpriv, task_setscheduler, setioprio, and setnice will continue to be hooked. That will be noticable in the case where a root task changed its uid while keeping some caps, and another task owned by the new uid tries to change settings for the more privileged task. Changelog: Nov 05 2008: (v4) trivial port on top of always-start-\ with-clear-caps patch Sep 23 2008: nixed file_caps_enabled when file caps are not compiled in as it isn't used. Document no_file_caps in kernel-parameters.txt. Signed-off-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NAndrew G. Morgan <morgan@kernel.org> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 James Morris 提交于
-
由 Michal Schmidt 提交于
In enforcing mode '/sbin/ip addrlabel' results in a SELinux error: type=SELINUX_ERR msg=audit(1225698822.073:42): SELinux: unrecognized netlink message type=74 for sclass=43 The problem is missing RTM_*ADDRLABEL entries in SELinux's netlink message types table. Reported in https://bugzilla.redhat.com/show_bug.cgi?id=469423Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 05 11月, 2008 4 次提交
-
-
由 Eric Paris 提交于
SELinux has long been calling wake_up_interruptible() on current->parent->signal->wait_chldexit without holding any locks. It appears that this operation should hold the tasklist_lock to dereference current->parent and we should hold the siglock when waking up the signal->wait_chldexit. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: xfrm: Fix xfrm_policy_gc_lock handling. niu: Use pci_ioremap_bar(). bnx2x: Version Update bnx2x: Calling netif_carrier_off at the end of the probe bnx2x: PCI configuration bug on big-endian bnx2x: Removing the PMF indication when unloading mv643xx_eth: fix SMI bus access timeouts net: kconfig cleanup fs_enet: fix polling XFRM: copy_to_user_kmaddress() reports local address twice SMC91x: Fix compilation on some platforms. udp: Fix the SNMP counter of UDP_MIB_INERRORS udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS drivers/net/smc911x.c: Fix lockdep warning on xmit.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: mask off DET when restoring SControl for detach libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it libata: Fix a potential race condition in ata_scsi_park_show() sata_nv: fix generic, nf2/3 detection regression sata_via: restore vt*_prepare_host error handling sata_promise: add ATA engine reset to reset ops
-
由 Jianjun Kong 提交于
Signed-off-by: NJianjun Kong <jianjun@zeuux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 11月, 2008 5 次提交
-
-
由 Tejun Heo 提交于
libata restores SControl on detach; however, trying to restore non-zero DET can cause undeterministic behavior including PMP device going offline till power cycling. Mask off DET when restoring SControl. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
libata always uses PIO for ATAPI commands when the number of bytes to transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes PIO transfers. Implement a horkage to skip the mod16 check and apply it to the quantum device. This is reported by John Clark in the following thread. http://thread.gmane.org/gmane.linux.ide/34748Signed-off-by: NTejun Heo <tj@kernel.org> Cc: John Clark <clarkjc@runbox.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Elias Oltmanns 提交于
Peter Moulder has pointed out that there is a slight chance that a negative value might be passed to jiffies_to_msecs() in ata_scsi_park_show(). This is fixed by saving the value of jiffies in a local variable, thus also reducing code since the volatile variable jiffies is accessed only once. Signed-off-by: NElias Oltmanns <eo@nebensachen.de> Signed-off-by: Tejun Heo <tj.kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
All three flavors of sata_nv's are different in how their hardreset behaves. * generic: Hardreset is not reliable. Link often doesn't come online after hardreset. * nf2/3: A little bit better - link comes online with longer debounce timing. However, nf2/3 can't reliable wait for the first D2H Register FIS, so it can't wait for device readiness or classify the device after hardreset. Follow-up SRST required. * ck804: Hardreset finally works. The core layer change to prefer hardreset and follow up changes exposed the above issues and caused various detection regressions for all three flavors. This patch, hopefully, fixes all the known issues and should make sata_nv error handling more reliable. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Marcin Slusarz 提交于
commit b9d5b89b (sata_via: fix support for 5287) accidently (?) removed vt*_prepare_host error handling - restore it catched by gcc: drivers/ata/sata_via.c: In function 'svia_init_one': drivers/ata/sata_via.c:567: warning: 'host' may be used uninitialized in this function Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-