task #28910367
commit 8fab010644363f8f80194322aa7a81e38c867af3 upstream

Don't hold onto dentry in lru list if need to re-lookup it anyway at next
access.  Only do this if explicitly enabled, otherwise it could result in
performance regression.

More advanced version of this patch would periodically flush out dentries
from the lru which have gone stale.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 4388c5aac4bae5c83a2c66882043942002ba09a2 upstream

stacked file systems like virtio-fs do not have to play directly with
forget list data structures. There is a helper function use that instead.

Rename dequeue_forget() to fuse_dequeue_forget() and export it so that
stacked filesystems can use it.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 79d96efffda7597b41968d5d8813b39fc2965f1b upstream

virtio-fs will need unique IDs for FORGET requests from outside
fs/fuse/dev.c.  Make the symbol visible.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 0cd1eb9a4160a96e0ec9b93b2e7b489f449bf22d upstream

As of now fuse_dev_alloc() both allocates a fuse device and installs it
in fuse_conn list. fuse_dev_alloc() can fail if fuse_device allocation
fails.

virtio-fs needs to initialize multiple fuse devices (one per virtio
queue). It initializes one fuse device as part of call to
fuse_fill_super_common() and rest of the devices are allocated and
installed after that.

But, we can't affort to fail after calling fuse_fill_super_common() as
we don't have a way to undo all the actions done by fuse_fill_super_common().
So to avoid failures after the call to fuse_fill_super_common(),
pre-allocate all fuse devices early and install them into fuse connection
later.

This patch provides two separate helpers for fuse device allocation and
fuse device installation in fuse_conn.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit ae3aad77f46fbba56eff7141b2fc49870b60827e upstream

The /dev/fuse device uses fiq->waitq and fasync to signal that requests
are available.  These mechanisms do not apply to virtio-fs.  This patch
introduces callbacks so alternative behavior can be used.

Note that queue_interrupt() changes along these lines:

  spin_lock(&fiq->waitq.lock);
  wake_up_locked(&fiq->waitq);
+ kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
  spin_unlock(&fiq->waitq.lock);
- kill_fasync(&fiq->fasync, SIGIO, POLL_IN);

Since queue_request() and queue_forget() also call kill_fasync() inside
the spinlock this should be safe.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 95a84cdb11c26315a6d34664846f82c438c961a1 upstream

This will be used by virtio-fs to send init request to fuse server after
initialization of virt queues.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 14d46d7abc3973a47e8eb0eb5eb87ee8d910a505 upstream

virtio-fs will need to query the length of fuse_arg lists.  Make the
symbol visible.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 04ec5af0776e9baefed59891f12adbcb5fa71a23 upstream

virtio-fs will need to complete requests from outside fs/fuse/dev.c.
Make the symbol visible.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28910367
commit 0cc2656cdb0b1f234e6d29378cb061e29d7522bc upstream

fuse_fill_super() includes code to process the fd= option and link the
struct fuse_dev to the fd's struct file.  In virtio-fs there is no file
descriptor because /dev/fuse is not used.

This patch extracts fuse_fill_super_common() so that both classic fuse
and virtio-fs can share the code to initialize a mount.

parse_fuse_opt() is also extracted so that the fuse_fill_super_common()
caller has access to the mount options.  This allows classic fuse to
handle the fd= option outside fuse_fill_super_common().
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

The failover of fuse userspace daemon will reuse the existing fuse conn,
without unmounting it, during daemon crashing and recovery procedure.
But some requests might be in process in the daemon before sending out reply,
when the crash happens. This will stuck the application since it will
never get the reply after the failover.

We add the sysfs api to flush these requests, after the daemon crash, before
recovery. It is easy to reproduce the issue in the fuse userspace daemon,
just exit after receiving the request and before sending the reply back.
The application will hang up in some read/write operation, before
echo 1 > /sys/fs/fuse/connection/xxx/flush. The flush operation will make
the io fail and return the error to the application.
Signed-off-by: NMa Jie Yue <majieyue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit eb59bd17d2fa6e5e84fba61a5ebdea984222e6d5 upstream.

If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.

Create a helper to validate the attributes.  This now does two things:

 - check the file mode
 - check if the file size fits in i_size without overflowing
Reported-by: NArijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba45 ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 76e43c8ccaa35c30d5df853013561145a0f750a5 ]

When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.

This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled.  Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.

Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.

Reproducer:

	#include <fcntl.h>
	#include <stdio.h>
	#include <sys/mount.h>
	#include <sys/stat.h>
	#include <sys/syscall.h>
	#include <unistd.h>
	#include <linux/aio_abi.h>

	int main()
	{
		char opts[128];
		int fd = open("/dev/fuse", O_RDWR);
		aio_context_t ctx = 0;
		struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
		struct iocb *cbp = &cb;

		sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
		mkdir("mnt", 0700);
		mount("foo",  "mnt", "fuse", 0, opts);
		syscall(__NR_io_setup, 1, &ctx);
		syscall(__NR_io_submit, ctx, 1, &cbp);
	}

Beginning of lockdep output:

	=====================================================
	WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
	5.3.0-rc5 #9 Not tainted
	-----------------------------------------------------
	syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
	000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
	000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
	000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825

	and this task is already holding:
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
	which would create a new lock dependency:
	 (&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}

	but this new dependency connects a SOFTIRQ-irq-safe lock:
	 (&(&ctx->ctx_lock)->rlock){..-.}

	[...]

Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes: bfe4037e ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2e64ff154ce6ce9a8dc0f9556463916efa6ff460 upstream.

When FUSE_OPEN returns ENOSYS, the no_open bit is set on the connection.

Because the FUSE_RELEASE and FUSE_RELEASEDIR paths share code, this
incorrectly caused the FUSE_RELEASEDIR request to be dropped and never sent
to userspace.

Pass an isdir bool to distinguish between FUSE_RELEASE and FUSE_RELEASEDIR
inside of fuse_file_put.

Fixes: 7678ac50 ("fuse: support clients that don't implement 'open'")
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: NChad Austin <chadaustin@fb.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If parallel dirops are enabled in FUSE_INIT reply, then first operation may
leave fi->mutex held.
Reported-by: Nsyzbot <syzbot+3f7b29af1baa9d0a55be@syzkaller.appspotmail.com>
Fixes: 5c672ab3 ("fuse: serialize dirops by default")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

fuse_abort_conn() does not guarantee that all async requests have actually
finished aborting (i.e. their ->end() function is called).  This could
actually result in still used inodes after umount.

Add a helper to wait until all requests are fully done.  This is done by
looking at the "num_waiting" counter.  When this counter drops to zero, we
can be sure that no more requests are outstanding.

Fixes: 0d8e84b0 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Ensure the translation happens by failing to read or write
posix acls when the filesystem has not indicated it supports
posix acls.

This ensures that modern cached posix acl support is available
and used when dealing with posix acls.  This is important
because only that path has the code to convernt the uids and
gids in posix acls into the user namespace of a fuse filesystem.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

In order to support mounts from namespaces other than init_user_ns, fuse
must translate uids and gids to/from the userns of the process servicing
requests on /dev/fuse. This patch does that, with a couple of restrictions
on the namespace:

 - The userns for the fuse connection is fixed to the namespace
   from which /dev/fuse is opened.

 - The namespace must be the same as s_user_ns.

These restrictions simplify the implementation by avoiding the need to pass
around userns references and by allowing fuse to rely on the checks in
setattr_prepare for ownership changes.  Either restriction could be relaxed
in the future if needed.

For cuse the userns used is the opener of /dev/cuse.  Semantically the cuse
support does not appear safe for unprivileged users.  Practically the
permissions on /dev/cuse only make it accessible to the global root user.
If something slips through the cracks in a user namespace the only users
who will be able to use the cuse device are those users mapped into the
user namespace.

Translation in the posix acl is updated to use the uuser namespace of the
filesystem.  Avoiding cases which might bypass this translation is handled
in a following change.

This change is stronlgy based on a similar change from Seth Forshee and
Dongsu Park.

Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Currently the userspace has no way of knowing whether the fuse
connection ended because of umount or abort via sysfs. It makes it hard
for filesystems to free the mountpoint after abort without worrying
about removing some new mount.

The patch fixes it by returning different errors when userspace reads
from /dev/fuse (-ENODEV for umount and -ECONNABORTED for abort).

Add a new capability flag FUSE_ABORT_ERROR. If set and the connection is
gone because of sysfs abort, reading from the device will return
-ECONNABORTED.
Signed-off-by: NSzymon Lukasz <noh4hss@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The refreshed argument isn't used by any caller, get rid of it.

Use a helper for just updating the inode (no need to fill in a kstat).
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

If the IOCB_DSYNC flag is set a sync is not being performed by
fuse_file_write_iter.

Honor IOCB_DSYNC/IOCB_SYNC by setting O_DYSNC/O_SYNC respectively in the
flags filed of the write request.

We don't need to sync data or metadata, since fuse_perform_write() does
write-through and the filesystem is responsible for updating file times.

Original patch by Vitaly Zolotusky.
Reported-by: NNate Clark <nate@neworld.us>
Cc: Vitaly Zolotusky <vitaly@unitc.com>.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Commit 8fba54ae ("fuse: direct-io: don't dirty ITER_BVEC pages") fixes
the ITER_BVEC page deadlock for direct io in fuse by checking in
fuse_direct_io(), whether the page is a bvec page or not, before locking
it.  However, this check is missed when the "async_dio" mount option is
enabled.  In this case, set_page_dirty_lock() is called from the req->end
callback in request_end(), when the fuse thread is returning from userspace
to respond to the read request.  This will cause the same deadlock because
the bvec condition is not checked in this path.

Here is the stack of the deadlocked thread, while returning from userspace:

[13706.656686] INFO: task glusterfs:3006 blocked for more than 120 seconds.
[13706.657808] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[13706.658788] glusterfs       D ffffffff816c80f0     0  3006      1
0x00000080
[13706.658797]  ffff8800d6713a58 0000000000000086 ffff8800d9ad7000
ffff8800d9ad5400
[13706.658799]  ffff88011ffd5cc0 ffff8800d6710008 ffff88011fd176c0
7fffffffffffffff
[13706.658801]  0000000000000002 ffffffff816c80f0 ffff8800d6713a78
ffffffff816c790e
[13706.658803] Call Trace:
[13706.658809]  [<ffffffff816c80f0>] ? bit_wait_io_timeout+0x80/0x80
[13706.658811]  [<ffffffff816c790e>] schedule+0x3e/0x90
[13706.658813]  [<ffffffff816ca7e5>] schedule_timeout+0x1b5/0x210
[13706.658816]  [<ffffffff81073ffb>] ? gup_pud_range+0x1db/0x1f0
[13706.658817]  [<ffffffff810668fe>] ? kvm_clock_read+0x1e/0x20
[13706.658819]  [<ffffffff81066909>] ? kvm_clock_get_cycles+0x9/0x10
[13706.658822]  [<ffffffff810f5792>] ? ktime_get+0x52/0xc0
[13706.658824]  [<ffffffff816c6f04>] io_schedule_timeout+0xa4/0x110
[13706.658826]  [<ffffffff816c8126>] bit_wait_io+0x36/0x50
[13706.658828]  [<ffffffff816c7d06>] __wait_on_bit_lock+0x76/0xb0
[13706.658831]  [<ffffffffa0545636>] ? lock_request+0x46/0x70 [fuse]
[13706.658834]  [<ffffffff8118800a>] __lock_page+0xaa/0xb0
[13706.658836]  [<ffffffff810c8500>] ? wake_atomic_t_function+0x40/0x40
[13706.658838]  [<ffffffff81194d08>] set_page_dirty_lock+0x58/0x60
[13706.658841]  [<ffffffffa054d968>] fuse_release_user_pages+0x58/0x70 [fuse]
[13706.658844]  [<ffffffffa0551430>] ? fuse_aio_complete+0x190/0x190 [fuse]
[13706.658847]  [<ffffffffa0551459>] fuse_aio_complete_req+0x29/0x90 [fuse]
[13706.658849]  [<ffffffffa05471e9>] request_end+0xd9/0x190 [fuse]
[13706.658852]  [<ffffffffa0549126>] fuse_dev_do_write+0x336/0x490 [fuse]
[13706.658854]  [<ffffffffa054963e>] fuse_dev_write+0x6e/0xa0 [fuse]
[13706.658857]  [<ffffffff812a9ef3>] ? security_file_permission+0x23/0x90
[13706.658859]  [<ffffffff81205300>] do_iter_readv_writev+0x60/0x90
[13706.658862]  [<ffffffffa05495d0>] ? fuse_dev_splice_write+0x350/0x350
[fuse]
[13706.658863]  [<ffffffff812062a1>] do_readv_writev+0x171/0x1f0
[13706.658866]  [<ffffffff810b3d00>] ? try_to_wake_up+0x210/0x210
[13706.658868]  [<ffffffff81206361>] vfs_writev+0x41/0x50
[13706.658870]  [<ffffffff81206496>] SyS_writev+0x56/0xf0
[13706.658872]  [<ffffffff810257a1>] ? syscall_trace_leave+0xf1/0x160
[13706.658874]  [<ffffffff816cbb2e>] system_call_fastpath+0x12/0x71

Fix this by making should_dirty a fuse_io_priv parameter that can be
checked in fuse_aio_complete_req().
Reported-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NAshish Samant <ashish.samant@oracle.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

It is not needed anymore since bdi is initialized whenever superblock
exists.

CC: Miklos Szeredi <miklos@szeredi.hu>
CC: linux-fsdevel@vger.kernel.org
Suggested-by: NMiklos Szeredi <mszeredi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.

CC: Miklos Szeredi <miklos@szeredi.hu>
CC: linux-fsdevel@vger.kernel.org
Acked-by: NMiklos Szeredi <mszeredi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

When the userspace process servicing fuse requests is running in
a pid namespace then pids passed via the fuse fd are not being
translated into that process' namespace. Translation is necessary
for the pid to be useful to that process.

Since no use case currently exists for changing namespaces all
translations can be done relative to the pid namespace in use
when fuse_conn_init() is called. For fuse this translates to
mount time, and for cuse this is when /dev/cuse is opened. IO for
this connection from another namespace will return errors.

Requests from processes whose pid cannot be translated into the
target namespace will have a value of 0 for in.h.pid.

File locking changes based on previous work done by Eric
Biederman.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

struct fuse_file is stored in file->private_data.  Make this always be a
counting reference for consistency.

This also allows fuse_sync_release() to call fuse_file_put() instead of
partially duplicating its functionality.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Since we need to change the implementation, stop exposing internals.

Provide KREF_INIT() to allow static initialization of struct kref.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Add missing dentry initialization to root dentry.

Fixes: f75fdf22 ("fuse: don't use ->d_time")
Reported-by: NAndreas Reis <andreas.reis@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

In preparation for posix acl support, rework fuse to use xattr handlers and
the generic setxattr/getxattr/listxattr callbacks.  Split the xattr code
out into it's own file, and promote symbols to module-global scope as
needed.

Functionally these changes have no impact, as fuse still uses a single
handler for all xattrs which uses the old callbacks.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Only two flags: "default_permissions" and "allow_other".  All other flags
are handled via bitfields.  So convert these two as well.  They don't
change during the lifetime of the filesystem, so this is quite safe.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Add a new INIT flag, FUSE_POSIX_ACL, for negotiating ACL support with
userspace.  When it is set in the INIT response, ACL support will be
enabled.  ACL support also implies "default_permissions".

When ACL support is enabled, the kernel will cache and have responsibility
for enforcing ACLs.  ACL xattrs will be passed to userspace, which is
responsible for updating the ACLs in the filesystem, keeping the file mode
in sync, and inheritance of default ACLs when new filesystem nodes are
created.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Only userspace filesystem can do the killing of suid/sgid without races.
So introduce an INIT flag and negotiate support for this.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

To avoid clearing of capabilities or security related extended
attributes too early, inode_change_ok() will need to take dentry instead
of inode. Propagate it down to fuse_do_setattr().
Acked-by: NMiklos Szeredi <mszeredi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

While sending the blocking directIO in fuse, the write request is broken
into sub-requests, each of default size 128k and all the requests are sent
in non-blocking background mode if async_dio mode is supported by libfuse.
The process which issue the write wait for the completion of all the
sub-requests. Sending multiple requests parallely gives a chance to perform
parallel writes in the user space fuse implementation if it is
multi-threaded and hence improves the performance.

When there is a size extending aio dio write, we switch to blocking mode so
that we can properly update the size of the file after completion of the
writes. However, in this situation all the sub-requests are sent in
serialized manner where the next request is sent only after receiving the
reply of the current request. Hence the multi-threaded user space
implementation is not utilized properly.

This patch changes the size extending aio dio behavior to exactly follow
blocking dio. For multi threaded fuse implementation having 10 threads and
using buffer size of 64MB to perform async directIO, we are getting double
the speed.
Signed-off-by: NAshish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Negotiate with userspace filesystems whether they support parallel readdir
and lookup.  Disable parallelism by default for fear of breaking fuse
filesystems.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 9902af79 ("parallel lookups: actual switch to rwsem")
Fixes: d9b3dbdc ("fuse: switch to ->iterate_shared()")

The 'reqs' member of fuse_io_priv serves two purposes. First is to track
the number of oustanding async requests to the server and to signal that
the io request is completed. The second is to be a reference count on the
structure to know when it can be freed.

For sync io requests these purposes can be at odds.  fuse_direct_IO() wants
to block until the request is done, and since the signal is sent when
'reqs' reaches 0 it cannot keep a reference to the object. Yet it needs to
use the object after the userspace server has completed processing
requests. This leads to some handshaking and special casing that it
needlessly complicated and responsible for at least one race condition.

It's much cleaner and safer to maintain a separate reference count for the
object lifecycle and to let 'reqs' just be a count of outstanding requests
to the userspace server. Then we can know for sure when it is safe to free
the object without any handshaking or special cases.

The catch here is that most of the time these objects are stack allocated
and should not be freed. Initializing these objects with a single reference
that is never released prevents accidental attempts to free the objects.

Fixes: 9d5722b7 ("fuse: handle synchronous iocbs internally")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>