Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 29 3月, 2012 1 次提交
  3. 17 3月, 2012 1 次提交
  5. 12 3月, 2012 6 次提交
  7. 06 3月, 2012 1 次提交
    • R
      ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 · cc4ad907
      由 R Sricharan 提交于 
      While building modules with randconfig the below errors are observed.

ERROR: "omap_bus_sync" [drivers/watchdog/sp805_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/watchdog/dw_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/virtio/virtio_ring.ko] undefined!
ERROR: "omap_bus_sync" [drivers/video/sm501fb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/sl811-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/ohci-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1760.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1362-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp116x-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_uart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_jtaguart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/8250/8250_dw.ko] undefined!
ERROR: "omap_bus_sync" [drivers/ssb/ssb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-cmos.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-bq4802.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/tmio_nand.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/omap2.ko] undefined!
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      cc4ad907
  9. 05 3月, 2012 1 次提交
  11. 01 3月, 2012 1 次提交
  13. 29 2月, 2012 1 次提交
  15. 27 2月, 2012 1 次提交
  17. 24 2月, 2012 2 次提交
  19. 23 2月, 2012 1 次提交
  21. 22 2月, 2012 1 次提交
  23. 21 2月, 2012 3 次提交
    • R
      ARM: OMAP: fix voltage domain build errors with PM_OPP disabled · 3ddd4d0c
      由 Russell King 提交于 
      The voltage domain code wants the voltage tables, which are in the
opp*.c files.  These files aren't built when PM_OPP is disabled,
causing the following build errors at link time:

twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data'
twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data'
twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data'
twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data'
twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data'
twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data'
twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data'
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      3ddd4d0c
    • T
      ARM: OMAP: Fix build error when mmc_omap is built as module · d5171102
      由 Tony Lindgren 提交于 
      Otherwise we get the following error:

arch/arm/mach-omap2/built-in.o: In function `n8x0_mmc_callback':
twl-common.c:(.text+0x108a0): undefined reference to
`omap_mmc_notify_cover_event'

Fix this by warning about unusable MMC cover events.

The long term fix needs to change the MMC drivers to
register board specific callbacks directly with PMIC.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      d5171102
    • T
      ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module · 97899e55
      由 Tony Lindgren 提交于 
      On some omaps twl4030_gpio has a callback to try to initialize
the MMC controller. If twl4030_gpio is compiled as a module,
bad things can happen because the callback function starts
calling functions that are supposed to be marked __init:

Kernel panic - not syncing: Attempted to kill the idle task!
twl4030_gpio twl4030_gpio: can't dispatch IRQs from modules
gpiochip_add: registered GPIOs 192 to 209 on device: twl4030
Unable to handle kernel paging request at virtual address b82a4c74
...

Additionally if this does not fail, warnings are produced
about trying to register the MMC multiple times.

Fix this by removing __init from omap_mux_get_by_name,
and add checks if omap2_hsmmc_init() is getting called more
than once.

Note that this will get fixed properly later on by splitting
omap2_hsmmc_init into two functions.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      97899e55
  25. 16 2月, 2012 1 次提交
    • G
      irq_domain: Remove irq_domain_add_simple() · 6b783f7c
      由 Grant Likely 提交于 
      irq_domain_add_simple() was a stop-gap measure until complete irq_domain
support was complete.  This patch removes the irq_domain_add_simple()
interface.

This patch also drops the explicit irq_domain initialization performed
by the mach-versatile code because the versatile interrupt controller
already has irq_domain support built into it.  This was a bug that was
hanging around quietly for a while, but with the full irq_domain which
actually verifies that irq_domain ranges are available it would cause
the registration to fail and the system wouldn't boot.

v4: Fixed number of irqs in mx5 gpio code
v2: Updated to pass in host_data pointer on irq_domain allocation.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Cc: Russell King <linux@arm.linux.org.uk>
Tested-by: NOlof Johansson <olof@lixom.net>
      6b783f7c
  27. 15 2月, 2012 4 次提交
  29. 13 2月, 2012 11 次提交
    • R
      ARM: omap: resolve nebulous 'Error setting wl12xx data' · 70d669de
      由 Russell King 提交于 
      It's useful to print the error code when a called function fails so a
diagnosis of why it failed is possible.  In this case, it fails because
we try to register some data for the wl12xx driver, but as the driver
is not configured, a stub function is used which simply returns -ENOSYS.

Let's do the simple thing for -rc and print the error code.

Also, the return code from platform_register_device() at each of these
sites was not being checked.  Add some checking, and again print the
error code.

This should be fixed properly for the next merge window so we don't
issue error messages merely because a driver is not configured.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      70d669de
    • R
      ARM: omap: fix wrapped error messages in omap_hwmod.c · 4f8a428d
      由 Russell King 提交于 
      While trying to debug my OMAP platforms, they emitted this message:

omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state

The following backtrace said it was from a function called '_enable',
which didn't provide much clue.  Grepping didn't find it either.

The message is wrapped, so unwrap the message so grep can find it.  Do
the same for three other messages in this file.
Acked-by: NPaul Walmsley <paul@pwsan.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      4f8a428d
    • R
      ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c · 8930b4e3
      由 Russell King 提交于 
      The previous commit causes new section mismatch warnings:

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb30): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio()
The function omap_init_hsmmc() references
the function __init omap_mux_init_gpio().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_gpio is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb4c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio()
The function omap_init_hsmmc() references
the function __init omap_mux_init_gpio().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_gpio is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb60): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb6c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb78): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb90): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb9c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdba8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbc0): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbcc): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbd8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbf8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc04): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc10): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc28): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc34): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc40): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc58): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc64): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc70): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc7c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.

Again, as for omap2_hsmmc_init(), these functions are callable at
runtime via the gpio-twl4030.c driver, and so these can't be marked
__init.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      8930b4e3
    • R
      ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup() · a98f77bb
      由 Russell King 提交于 
      WARNING: arch/arm/mach-omap2/built-in.o(.text+0xd0f0): Section mismatch in reference from the function sdp3430_twl_gpio_setup() to the function .init.text:omap2_hsmmc_init()
The function sdp3430_twl_gpio_setup() references
the function __init omap2_hsmmc_init().
This is often because sdp3430_twl_gpio_setup lacks a __init
annotation or the annotation of omap2_hsmmc_init is wrong.

sdp3430_twl_gpio_setup() is called via platform data from the
gpio-twl4030 module, which can be inserted and removed at runtime.
This makes sdp3430_twl_gpio_setup() callable at runtime, and prevents
it being marked with an __init annotation.

As it calls omap2_hsmmc_init() unconditionally, the only resolution to
this warning is to remove the __init markings from omap2_hsmmc_init()
and its called functions.  This addresses the functions in hsmmc.c.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      a98f77bb
    • R
      ARM: omap: fix section mismatch error for omap_4430sdp_display_init() · e3958fe0
      由 Russell King 提交于 
      WARNING: arch/arm/mach-omap2/built-in.o(.text+0xb798): Section mismatch in reference from the function omap_4430sdp_display_init() to the function .init.text:omap_display_init()
The function omap_4430sdp_display_init() references
the function __init omap_display_init().
This is often because omap_4430sdp_display_init lacks a __init
annotation or the annotation of omap_display_init is wrong.

Fix this by adding __init to omap_4430sdp_display_init().
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      e3958fe0
    • R
      ARM: omap: fix section mismatch warning for omap_secondary_startup() · 45176f4c
      由 Russell King 提交于 
      WARNING: vmlinux.o(.text+0x1c664): Section mismatch in reference from the function omap_secondary_startup() to the function .cpuinit.text:secondary_startup()
The function omap_secondary_startup() references
the function __cpuinit secondary_startup().
This is often because omap_secondary_startup lacks a __cpuinit
annotation or the annotation of secondary_startup is wrong.

Unfortunately, fixing this causes a new warning which is harder to
solve:

WARNING: arch/arm/mach-omap2/built-in.o(.text+0x5328): Section mismatch in reference from the function omap4_hotplug_cpu() to the function .cpuinit.text:omap_secondary_startup()
The function omap4_hotplug_cpu() references
the function __cpuinit omap_secondary_startup().
This is often because omap4_hotplug_cpu lacks a __cpuinit
annotation or the annotation of omap_secondary_startup is wrong.

because omap4_hotplug_cpu() is used by power management code as well,
which may not end up using omap_secondary_startup().
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      45176f4c
    • R
      ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init() · d5de63f5
      由 Russell King 提交于 
      Found by review.

omap4_sdp4430_wifi_mux_init() is called by an __init marked function,
and only calls omap_mux_init_gpio() and omap_mux_init_signal() which
are both also an __init marked functions.

The only reason this doesn't issue a warning is because the compiler
inlines omap4_sdp4430_wifi_mux_init() into omap4_sdp4430_wifi_init().

So, lets add the __init annotation to ensure this remains safe should
the compiler choose not to inline.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      d5de63f5
    • R
      ARM: omap: fix section mismatch warning in mux.c · 27d8d3bf
      由 Russell King 提交于 
      WARNING: arch/arm/mach-omap2/built-in.o(.text+0x15a4): Section mismatch in reference from the function omap_mux_init_signals() to the function .init.text:omap_mux_init_signal()
The function omap_mux_init_signals() references
the function __init omap_mux_init_signal().
This is often because omap_mux_init_signals lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      27d8d3bf
    • R
      ARM: omap: fix uninformative vc/i2c configuration error message · 0bf68f53
      由 Russell King 提交于 
      On my OMAP4 platform, I'm getting this error message repeated several
times at boot:

omap_vc_i2c_init: I2C config for all channels must match.
omap_vc_i2c_init: I2C config for all channels must match.

This doesn't help identify what the problem is.  Fix this message to
be more informative:

omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).

This allows us to identify which voltage domains have a problem, and
what the I2C configuration state (a boolean, i2c_high_speed) setting
being used actually is.

From this we find that omap4_core_pmic has i2c_high_speed false, but
omap4_iva_pmic and omap4_mpu_pmic both have it set true.
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      0bf68f53
    • R
      ARM: omap: fix vc.c PMIC error message · 2d5b4790
      由 Russell King 提交于 
      While testing on my OMAP3430 platform, this error message was emitted:

omap_vc_init_channel: PMIC info requried to configure vc forvdd_core not populated.Hence cannot initialize vc

Trying to find this message was difficult because it was wrapped across
several lines.  It also mis-spells "required", doesn't read very well,
and has spaces lacking.  Let's replace it with a more concise:

omap_vc_init_channel: No PMIC info for vdd_core

While we're here, fix a simple spelling error in a comment.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      2d5b4790
    • R
      ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error · e6fa35aa
      由 Russell King 提交于 
      When CONFIG_OF is disabled, the compile fails with:

arch/arm/mach-omap2/prm44xx.c:41: error: 'OMAP44XX_IRQ_PRCM' undeclared here (not in a function)
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      e6fa35aa
  31. 10 2月, 2012 3 次提交
    • P
      ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 · 1e056ddd
      由 Paul Walmsley 提交于 
      On OMAP2420-based systems, the PM code ignores the state of the UART
functional clocks when determining what idle state to enter.  This
breaks the serial port now that the UART driver's clock behavior can
be controlled via the PM autosuspend timeout.

To fix, remove the special-case idle handling for the UARTs in the
OMAP2420/2430 PM idle code added by commit
4af4016c ("OMAP3: PM: UART: disable
clocks when idle and off-mode support").

Tested on Nokia N800.  This patch is a collaboration between Tony
Lindgren <tony@atomide.com> and Paul Walmsley <paul@pwsan.com>.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
      1e056ddd
    • P
      tty: serial: OMAP: block idle while the UART is transferring data in PIO mode · be4b0281
      由 Paul Walmsley 提交于 
      Prevent OMAP UARTs from going idle while they are still transferring
data in PIO mode.  This works around an oversight in the OMAP UART
hardware present in OMAP34xx and earlier: an idle UART won't send a
wakeup when the TX FIFO threshold is reached.  This causes long delays
during data transmission when the MPU powerdomain enters a low-power
mode.  The MPU interrupt controller is not able to respond to
interrupts when it's in a low-power state, so the TX buffer is not
refilled until another wakeup event occurs.

This fix changes the erratum i291 DMA idle workaround.  Rather than
toggling between force-idle and no-idle, it will toggle between
smart-idle and no-idle.  The important part of the workaround is the
no-idle part, so this shouldn't result in any change in behavior.

This fix should work on all OMAP UARTs.  Future patches intended for
the 3.4 merge window will make this workaround conditional on a
"feature" flag, and will use the OMAP36xx+ TX event wakeup support.

Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291
workaround, which led to the development of this approach.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NGovindraj.R <govindraj.raja@ti.com>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Tested-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be4b0281
    • R
      ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found · d980e0f8
      由 Russell King 提交于 
      When the PMIC is not found, voltdm->pmic will be NULL.  vp.c's
initialization function tries to dereferences this, which causes an
oops:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0    Not tainted  (3.3.0-rc2+ #204)
PC is at omap_vp_init+0x5c/0x15c
LR is at omap_vp_init+0x58/0x15c
pc : [<c03db880>]    lr : [<c03db87c>]    psr: 60000013
sp : c181ff30  ip : c181ff68  fp : c181ff64
r10: c0407808  r9 : c040786c  r8 : c0407814
r7 : c0026868  r6 : c00264fc  r5 : c040ad6c  r4 : 00000000
r3 : 00000040  r2 : 000032c8  r1 : 0000fa00  r0 : 000032c8
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000015
Process swapper (pid: 1, stack limit = 0xc181e2e8)
Stack: (0xc181ff30 to 0xc1820000)
ff20:                                     c0381d00 c02e9c6d c0383582 c040786c
ff40: c040ad6c c00264fc c0026868 c0407814 00000000 c03d9de4 c181ff8c c181ff68
ff60: c03db448 c03db830 c02e982c c03fdfb8 c03fe004 c0039988 00000013 00000000
ff80: c181ff9c c181ff90 c03d9df8 c03db390 c181ffdc c181ffa0 c0008798 c03d9df0
ffa0: c181ffc4 c181ffb0 c0055a44 c0187050 c0039988 c03fdfb8 c03fe004 c0039988
ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03d1284 c0008708
ffe0: 00000000 c03d1208 00000000 c181fff8 c0039988 c03d1214 1077ce40 01f7ee08
Backtrace:
[<c03db824>] (omap_vp_init+0x0/0x15c) from [<c03db448>] (omap_voltage_late_init+0xc4/0xfc)
[<c03db384>] (omap_voltage_late_init+0x0/0xfc) from [<c03d9df8>] (omap2_common_pm_late_init+0x14/0x54)
 r8:00000000 r7:00000013 r6:c0039988 r5:c03fe004 r4:c03fdfb8
[<c03d9de4>] (omap2_common_pm_late_init+0x0/0x54) from [<c0008798>] (do_one_initcall+0x9c/0x164)
[<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03d1284>] (kernel_init+0x7c/0x120)
[<c03d1208>] (kernel_init+0x0/0x120) from [<c0039988>] (do_exit+0x0/0x2cc)
 r5:c03d1208 r4:00000000
Code: e5ca300b e5900034 ebf69027 e5994024 (e5941000)
---[ end trace aed617dddaf32c3d ]---
Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      d980e0f8
  33. 08 2月, 2012 1 次提交