[ Upstream commit d658c8f56ec7b3de8051a24afb25da9ba3c388c5 ]

The "ivm->vf" variable is a u32, but the problem is that a number of
drivers cast it to an int and then forget to check for negatives.  An
example of this is in the cxgb4 driver.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
  2890  static int cxgb4_mgmt_get_vf_config(struct net_device *dev,
  2891                                      int vf, struct ifla_vf_info *ivi)
                                            ^^^^^^
  2892  {
  2893          struct port_info *pi = netdev_priv(dev);
  2894          struct adapter *adap = pi->adapter;
  2895          struct vf_info *vfinfo;
  2896
  2897          if (vf >= adap->num_vfs)
                    ^^^^^^^^^^^^^^^^^^^
  2898                  return -EINVAL;
  2899          vfinfo = &adap->vfinfo[vf];
                ^^^^^^^^^^^^^^^^^^^^^^^^^^

There are 48 functions affected.

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646'
drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646'
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2744bf42680f64ebf2ee8a00354897857c073331 ]

XDP_TX rings should not be limited by max_num_tx_rings_p_up.
To make sure total number of TX rings never exceed MAX_TX_RINGS,
add similar check in mlx4_en_alloc_tx_queue_per_tc(), where
a new value is assigned for num_up.

Fixes: 7e1dc5e9 ("net/mlx4_en: Limit the number of TX rings")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 34e59836565e36fade1464e054a3551c1a0364be ]

ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the
total number of entries in the rx classifier table.  Surprisingly, mlx4
is missing this part (in principle ethtool could still move forward and
try the insert).

Tested: compiled and run command:
	phh13:~# ethtool -N eth1 flow-type udp4  queue 4
	Added rule with ID 255
Signed-off-by: NLuigi Rizzo <lrizzo@google.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1fc1657775dc1b19e9ac1d46b4054ed8ae5d99ab ]

The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a
GRE tunnel. For a tunnel without a bound device, it uses the same VRF that
the tunnel is in. However in Linux, a GRE tunnel without a bound device
uses the main VRF as the underlay. Fix the function accordingly.

mlxsw further assumed that moving a tunnel to a different VRF could cause
conflict in local tunnel endpoint address, which cannot be offloaded.
However, the only way that an underlay could be changed by moving the
tunnel device itself is if the tunnel device does not have a bound device.
But in that case the underlay is always the main VRF, so there is no
opportunity to introduce a conflict by moving such device. Thus this check
constitutes a dead code, and can be removed, which do.

Fixes: 6ddb7426 ("mlxsw: spectrum_router: Introduce loopback RIFs")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 52eb74339a6233c69f4e3794b69ea7c98eeeae1b ]

rdt_find_domain() returns an ERR_PTR() that is generated from a provided
domain id when the value is negative.

Care needs to be taken when creating an ERR_PTR() from this value
because a subsequent check using IS_ERR() expects the error to
be within the MAX_ERRNO range. Using an invalid domain id as an
ERR_PTR() does work at this time since this is currently always -1.
Using this undocumented assumption is fragile since future users of
rdt_find_domain() may not be aware of thus assumption.

Two related issues are addressed:

- Ensure that rdt_find_domain() always returns a valid error value by
forcing the error to be -ENODEV when a negative domain id is provided.

- In a few instances the return value of rdt_find_domain() is just
checked for NULL - fix these to include a check of ERR_PTR.

Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data")
Fixes: 521348b011d6 ("x86/intel_rdt: Introduce utility to obtain CDP peer")
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: fenghua.yu@intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/b88cd4ff6a75995bf8db9b0ea546908fe50f69f3.1544479852.git.reinette.chatre@intel.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51b72656bb39fdcb8f3174f4007bcc83ad1d275f ]

If an SCC error occurs during a read/write command execution, a false
positive CRC error message is output.

mmcblk0: response CRC error sending r/w cmd command, card status 0x900

check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a
correction error in the next (up or down) delay tap position. However,
since the command is successful, only retuning needs to be executed.
This has been confirmed by HW engineers.

Thus, on SCC error, set retuning flag instead of setting an error code.

Fixes: b85fb0a1c8ae ("mmc: tmio: Fix SCC error detection")
Signed-off-by: NTakeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: updated comment and commit message, removed some braces]
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b4d16ab58c41ff0125822464bdff074cebd0fe47 ]

In the recent commit 8b78fdb045de ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).

We no longer initialise the mult & shift values of
decrementer_clockevent itself.

This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.

For now fix it by assigning back to decrementer_clockevent the mult
and shift values.

Fixes: 8b78fdb045de ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8a5e0af240e07dd3d4897eb8ff52aab757da7fab ]

pcitest is currently broken due to the following compiler error
and related warning. Fix by changing the run_test() function
signature to return an integer result.

pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function
returning void
  return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */

pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
  return run_test(test);

Fixes: fef31ecaaf2c ("tools: PCI: Fix compilation warnings")
Signed-off-by: NAlan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NPaul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b53b0128052ffd687797d5f4deeb76327e7b5711 ]

The patch 23c7b54ca1cd: "PM / devfreq: Fix devfreq_add_device() when
drivers are built as modules." leads to the following static checker
warning:

    drivers/devfreq/devfreq.c:1043 governor_store()
    warn: 'governor' can also be NULL

The reason is that the try_then_request_governor() function returns both
error pointers and NULL. It should just return error pointers, so fix
this by returning a ERR_PTR to the error intead of returning NULL.

Fixes: 23c7b54ca1cd ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c8afd03486c26accdda4846e5561aa3f8e862a9d ]

Commit 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from
resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early
on BYT/CHT as resume_from_noirq is set.

This means that on resume from hibernate dw_i2c_plat_resume() doesn't get
called by the restore_early callback, acpi_lpss_resume_early(). Instead it
should be called by the restore_noirq callback matching how things are done
when resume_from_noirq is set and we are doing a regular resume.

Change the restore_noirq callback to acpi_lpss_resume_noirq so that
dw_i2c_plat_resume() gets properly called when resume_from_noirq is set
and we are resuming from hibernate.

Likewise also change the poweroff_noirq callback so that
dw_i2c_plat_suspend gets called properly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139
Fixes: 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq")
Reported-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 041a14d2671573611ffd6412bc16e2f64469f7fb ]

Previously receiver buffer auto-tuning starts after receiving
one advertised window amount of data. After the initial receiver
buffer was raised by patch a337531b942b ("tcp: up initial rmem to
128KB and SYN rwin to around 64KB"), the reciver buffer may take
too long to start raising. To address this issue, this patch lowers
the initial bytes expected to receive roughly the expected sender's
initial window.

Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NWei Wang <weiwan@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]

OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.

Without this, Host role will not work correctly.

Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5050f6ae253ad1307af3486c26fc4f94287078b7 ]

VxLAN FDB updates are sent with the VxLAN device which is not our upper
and will therefore be ignored by current code.

Solve this by checking whether the upper device (bridge) is our upper.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dd8fd2cbc73f8650f651da71fc61a6e4f30c1566 ]

The rxconf and txconf structs are allocated on the
stack, so make sure we zero them before filling out
the relevant fields.
Signed-off-by: NHuibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: NEmil Renner Berthing <kernel@esmil.dk>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 972b66b86f85f4e8201db454f4c3e9d990cf9836 ]

Long/short preamble selection cannot be sampled separately, since it
depends on the BSS state. Because of that, sampling attempts to
currently not used preamble modes are not counted in the statistics,
which leads to CCK rates being sampled too often.

Fix statistics accounting for long/short preamble by increasing the
index where necessary.
Fix excessive CCK rate sampling by dropping unsupported sample attempts.

This improves throughput on 2.4 GHz channels
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ]

Fixes a harmless underflow issue when CCK rates are actively being used
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 37439f2d6e43ae79e22be9be159f0af157468f82 ]

mi->supported[MINSTREL_CCK_GROUP] needs to be updated
short preamble rates need to be marked as supported regardless of
whether it's currently enabled. Its state can change at any time without
a rate_update call.

Fixes: 782dda00 ("mac80211: minstrel_ht: move short preamble check out of get_rate")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3dac3583bf1a61db6aaf31dfd752c677a4400afd ]

It is not safe to dereference an object before a null test. It is
not needed and just remove them. Ftrace can be used instead.
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NFrederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d701d8117200399d85e63a737d2e4e897932f3b6 ]

Zero pad private area, otherwise we expose private kernel pointer to
userspace. This patch also zeroes the tail area after the ->matchsize
and ->targetsize that results from XT_ALIGN().

Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f98ebd47fd0da1717267ce1583a105d8cc29a16a ]

While noop_qdisc.gso_skb and noop_qdisc.skb_bad_txq are not used
in other places, it seems not correct to overwrite their fields
in dev_init_scheduler_queue().

noop_qdisc is essentially a shared and read-only object, even if
it is not marked as const because of some implementation detail.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 372809055f6c830ff978564e09f58bcb9e9b937c ]

Immediately after mlxsw module is probed and lldpad started, added APP
entries are briefly in "unknown" state before becoming "pending". That's
the state that lldpad_app_wait_set() typically sees, and since there are
no pending entries at that time, it bails out. However the entries have
not been pushed to the kernel yet at that point, and thus the test case
fails.

Fix by waiting for both unknown and pending entries to disappear before
proceeding.

Fixes: d159261f ("selftests: mlxsw: Add test for trust-DSCP")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f21c8e753b1dcb8f9e5b096db1f7f4e6fdfa7258 ]

Change initial PWM target to 255 to prevent overheating, for example
when BMC hangs in userspace or when userspace fan control application is
not implemented yet.
Signed-off-by: NKun Yi <kunyi@google.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 791ebc9d34e9d212fc03742c31654b017d385926 ]

The three INA3221_CONFIG_MODE macros are not correctly defined here.
The MODE3-1 bits are located at BIT 2-0 according to the datasheet.

So this patch just fixes them by shifting all of them with a correct
offset. However, this isn't a crital bug fix as the driver does not
use any of them at this point.
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]

Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3be8c9d103534fadc72b3e174613f37aa19fa423 ]

For NCT6795D and NCT6796D, the DIMM temperature sources are named
"Agent[01] Dimm [01]" per datasheet. Match names in datasheets to
avoid confusion.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 53dfa0088edd2e2793afa21488532b12eb2dae48 ]

BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h
Models 70h-7fh. So far the driver only checked for Models 60h and 70h.
However, there are now processors with other model numbers in the same
families. Example is A10-9620P family 15h model 65h. Follow the developer
guides and mask the lower 4 bit of the model number to determine the
registers to use for reading temperatures and temperature limits.
Reported-by: NGuglielmo Fanini <g.fanini@gmail.com>
Cc: Guglielmo Fanini <g.fanini@gmail.com>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ca2ade24157693b4e533ccec69df00ef719d4aad ]

There are extraneous parantheses that are causing clang to produce a
warning so remove these.

Clean up 3 clang warnings:
equality comparison with extraneous parentheses [-Wparentheses-equality]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NChing Huang <ching2048@areca.com.tw>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a85c928f6a7856a09e47d9b37faa3407c7ac6a8e ]

The previous fix made the TVC clock get muxed in on the
D-Link DIR-685 instead of giving nagging warnings of this
not working. Not good. We didn't want that, as it breaks
video.

Create a specific group for the TVC CLK, and break out
a specific GPIO group for it on the SL3516 so we can use
that line as GPIO if we don't need the TVC CLK.

Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly")
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2978d873471005577e7b68a528b4f256a529b030 ]

Currently accessing various /sys/fs/orangefs files will spam the
kernel log with the following info message when the client is not
running:

[  491.489284] sysfs_service_op_show: Client not running :-5:

Rate limit this info message to make it less spammy.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c200dac78fec66d87ef262cac38cfe4feabdf737 ]

PCI BIOS requires the BIOS area 0x0A0000-0x0FFFFFF to be mapped W+X for
various legacy reasons. When CONFIG_DEBUG_WX is enabled, this triggers the
WX warning, but this is misleading because the mapping is required and is
not a result of an accidental oversight.

Prevent the full warning when PCI BIOS is enabled and the detected WX
mapping is in the BIOS area. Just emit a pr_warn() which denotes the
fact. This is partially duplicating the info which the PCI BIOS code emits
when it maps the area as executable, but that info is not in the context of
the WX checking output.

Remove the extra %p printout in the WARN_ONCE() while at it. %pS is enough.
Reported-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1810082151160.2455@nanos.tec.linutronix.deSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ]

On at least x86 and ARM64, and as documented in the ptrace man page
a skipped system call will still cause a syscall exit ptrace stop.

Previous to this commit 32-bit ARM did not, resulting in strace
being confused when seccomp skips system calls.

This change also impacts programs that use ptrace to skip system calls.

Fixes: ad75b514 ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL")
Signed-off-by: NTimothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: NEugene Syromyatnikov <evgsyr@gmail.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Tested-by: NKees Cook <keescook@chromium.org>
Tested-by: NEugene Syromyatnikov <evgsyr@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 605b3bec73cbd74b4ac937b580cd0b47d1300484 ]

spidev will make a big fuss if a device tree node binds a device by
using "spidev" as the node's compatible property.

However, the logic for this isn't looking for "spidev" in the
compatible, but rather checking that the device is NOT compatible with
spidev's list of devices.

This causes a false positive if a device not named "rohm,dh2228fv", etc.
binds to spidev, even if a means other than putting "spidev" in the
device tree was used.  E.g., the sysfs driver_override attribute.
Signed-off-by: NTrent Piepho <tpiepho@impinj.com>
Reviewed-by: NJan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: NJan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d17f477c5bc6b4a5dd9f51ae263870da132a8e89 ]

The code was written under the assumption that the
regmap_update_bits() would mask the bits in the mask and
set the bits in the value.

It missed the points that it will not set bits in the value
unless these are also masked in the mask. Set value bits
that are not in the mask will simply be ignored.

Fixes: 06351d13 ("pinctrl: add a Gemini SoC pin controller")
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit de8978c388c66b8fca192213ec9f0727e964c652 ]

Certain devices don't work well when a transmit FIFO underrun or
receive FIFO overrun occurs. Example is the SAF400x radio chip when
running at high speed which leads to garbage being sent to/received from
the chip. In which case, it should stall waiting for further data to be
available before proceeding. This patch unset the NOSTALL bit in CFGR1
by default to prevent this issue.
Signed-off-by: NHieu Tran Dang <dangtranhieu2012@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ]

The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT
and chip->set is valid pointer. This happens in case the controller uses
the default GPIO setter. Always use chip->set to access the setter to avoid
possible NULL pointer dereferencing.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2972495699320229b55b8e5065a310be5c81485b ]

XDP can modify (and resize) the Ethernet header in the packet.

There is a bug in generic-XDP, because skb->protocol and skb->pkt_type
are setup before reaching (netif_receive_)generic_xdp.

This bug was hit when XDP were popping VLAN headers (changing
eth->h_proto), as skb->protocol still contains VLAN-indication
(ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt
the packet (basically popping the VLAN again).

This patch catch if XDP changed eth header in such a way, that SKB
fields needs to be updated.

V2: on request from Song Liu, use ETH_HLEN instead of mac_len,
in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline().

Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8af03d1ae2e154a8be3631e8694b87007e1bdbc2 ]

In btf_parse_hdr(), the length of the btf data header is firstly copied
from the user space to 'hdr_len' and checked to see whether it is larger
than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise,
the whole header is copied again from the user space to 'btf->hdr'.
However, after the second copy, there is no check between
'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the
same value. Given that the btf data is in the user space, a malicious user
can race to change the data between the two copies. By doing so, the user
can provide malicious data to the kernel and cause undefined behavior.

This patch adds a necessary check after the second copy, to make sure
'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error
code EINVAL will be returned.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51fbf14f2528a8c6401290e37f1c893a2412f1d3 ]

The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():

  int crash_load_segments(struct kimage *image)
  {
    ...
    walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
                        image, determine_backup_region);

walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.

KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.

Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].

Fixes: dd5f7260 ("kexec: support for kexec on panic using new system call")
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: baiyaowei@cmss.chinamobile.com
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8a57fc3823d08edb1661a06d9e0a8c2365ac561e ]

When do GC, the number of read/write sectors are determined
by max_write_pgs(see gc_rq preparation in pblk_gc_line_prepare_ws).

Due to max_write_pgs doesn't consider max hw sectors
supported by nvme controller(128K), which leads to GC
tries to read 64 * 4K in one command, and see below error
caused by pblk_bio_map_addr in function pblk_submit_read_gc.

[ 2923.005376] pblk: could not add page to bio
[ 2923.005377] pblk: could not allocate GC bio (18446744073709551604)
Signed-off-by: NZhoujie Wu <zjwu@marvell.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>