- 10 11月, 2009 2 次提交
-
-
由 Frederic Weisbecker 提交于
Fix the broken a.out format dump. For now we only dump the ptrace breakpoints. TODO: Dump every perf breakpoints for the current thread, not only ptrace based ones. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
-
由 Paul Mundt 提交于
All of the infrastructure already exists to support read accesses for platforms that support a read access independently of read/write (such as in the case of the SuperH UBC). This just trivially hooks up the read case by itself. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <20091109083733.GA25848@linux-sh.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 08 11月, 2009 3 次提交
-
-
由 Li Zefan 提交于
The macro used to be used in both trace_selftest.c and trace_ksym.c, but no longer, so remove it from header file. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Frederic Weisbecker 提交于
Allow or refuse to build a counter using the breakpoints pmu following given constraints. We keep track of the pmu users by using three per cpu variables: - nr_cpu_bp_pinned stores the number of pinned cpu breakpoints counters in the given cpu - nr_bp_flexible stores the number of non-pinned breakpoints counters in the given cpu. - task_bp_pinned stores the number of pinned task breakpoints in a cpu The latter is not a simple counter but gathers the number of tasks that have n pinned breakpoints. Considering HBP_NUM the number of available breakpoint address registers: task_bp_pinned[0] is the number of tasks having 1 breakpoint task_bp_pinned[1] is the number of tasks having 2 breakpoints [...] task_bp_pinned[HBP_NUM - 1] is the number of tasks having the maximum number of registers (HBP_NUM). When a breakpoint counter is created and wants an access to the pmu, we evaluate the following constraints: == Non-pinned counter == - If attached to a single cpu, check: (per_cpu(nr_bp_flexible, cpu) || (per_cpu(nr_cpu_bp_pinned, cpu) + max(per_cpu(task_bp_pinned, cpu)))) < HBP_NUM -> If there are already non-pinned counters in this cpu, it means there is already a free slot for them. Otherwise, we check that the maximum number of per task breakpoints (for this cpu) plus the number of per cpu breakpoint (for this cpu) doesn't cover every registers. - If attached to every cpus, check: (per_cpu(nr_bp_flexible, *) || (max(per_cpu(nr_cpu_bp_pinned, *)) + max(per_cpu(task_bp_pinned, *)))) < HBP_NUM -> This is roughly the same, except we check the number of per cpu bp for every cpu and we keep the max one. Same for the per tasks breakpoints. == Pinned counter == - If attached to a single cpu, check: ((per_cpu(nr_bp_flexible, cpu) > 1) + per_cpu(nr_cpu_bp_pinned, cpu) + max(per_cpu(task_bp_pinned, cpu))) < HBP_NUM -> Same checks as before. But now the nr_bp_flexible, if any, must keep one register at least (or flexible breakpoints will never be be fed). - If attached to every cpus, check: ((per_cpu(nr_bp_flexible, *) > 1) + max(per_cpu(nr_cpu_bp_pinned, *)) + max(per_cpu(task_bp_pinned, *))) < HBP_NUM Changes in v2: - Counter -> event rename Changes in v5: - Fix unreleased non-pinned task-bound-only counters. We only released it in the first cpu. (Thanks to Paul Mackerras for reporting that) Changes in v6: - Currently, events scheduling are done in this order: cpu context pinned + cpu context non-pinned + task context pinned + task context non-pinned events. Then our current constraints are right theoretically but not in practice, because non-pinned counters may be scheduled before we can apply every possible pinned counters. So consider non-pinned counters as pinned for now. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Avi Kivity <avi@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org>
-
由 Frederic Weisbecker 提交于
This patch rebase the implementation of the breakpoints API on top of perf events instances. Each breakpoints are now perf events that handle the register scheduling, thread/cpu attachment, etc.. The new layering is now made as follows: ptrace kgdb ftrace perf syscall \ | / / \ | / / / Core breakpoint API / / | / | / Breakpoints perf events | | Breakpoints PMU ---- Debug Register constraints handling (Part of core breakpoint API) | | Hardware debug registers Reasons of this rewrite: - Use the centralized/optimized pmu registers scheduling, implying an easier arch integration - More powerful register handling: perf attributes (pinned/flexible events, exclusive/non-exclusive, tunable period, etc...) Impact: - New perf ABI: the hardware breakpoints counters - Ptrace breakpoints setting remains tricky and still needs some per thread breakpoints references. Todo (in the order): - Support breakpoints perf counter events for perf tools (ie: implement perf_bpcounter_event()) - Support from perf tools Changes in v2: - Follow the perf "event " rename - The ptrace regression have been fixed (ptrace breakpoint perf events weren't released when a task ended) - Drop the struct hw_breakpoint and store generic fields in perf_event_attr. - Separate core and arch specific headers, drop asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h - Use new generic len/type for breakpoint - Handle off case: when breakpoints api is not supported by an arch Changes in v3: - Fix broken CONFIG_KVM, we need to propagate the breakpoint api changes to kvm when we exit the guest and restore the bp registers to the host. Changes in v4: - Drop the hw_breakpoint_restore() stub as it is only used by KVM - EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a module - Restore the breakpoints unconditionally on kvm guest exit: TIF_DEBUG_THREAD doesn't anymore cover every cases of running breakpoints and vcpu->arch.switch_db_regs might not always be set when the guest used debug registers. (Waiting for a reliable optimization) Changes in v5: - Split-up the asm-generic/hw-breakpoint.h moving to linux/hw_breakpoint.h into a separate patch - Optimize the breakpoints restoring while switching from kvm guest to host. We only want to restore the state if we have active breakpoints to the host, otherwise we don't care about messed-up address registers. - Add asm/hw_breakpoint.h to Kbuild - Fix bad breakpoint type in trace_selftest.c Changes in v6: - Fix wrong header inclusion in trace.h (triggered a build error with CONFIG_FTRACE_SELFTEST Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Avi Kivity <avi@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org>
-
- 06 11月, 2009 1 次提交
-
-
由 Frederic Weisbecker 提交于
We plan to make the breakpoints parameters generic among architectures. For that it's better to move the asm-generic header to a generic linux header. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 04 11月, 2009 3 次提交
-
-
由 Frederic Weisbecker 提交于
A simple callback in a perf event can be used for multiple purposes. For example it is useful for triggered based events like hardware breakpoints that need a callback to dispatch a triggered breakpoint event. v2: Simplify a bit the callback attribution as suggested by Paul Mackerras Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "K.Prasad" <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
flush_thread() tries to do a TIF_DEBUG check before calling in to flush_thread_hw_breakpoint() (which subsequently clears the thread flag), but for some reason, the x86 code is manually clearing TIF_DEBUG immediately before the test, so this path will never be taken. This kills off the erroneous clear_tsk_thread_flag() and lets flush_thread_hw_breakpoint() actually get invoked. Presumably folks were getting lucky with testing and the free_thread_info() -> free_thread_xstate() path was taking care of the flush there. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: N"K.Prasad" <prasad@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alan Stern <stern@rowland.harvard.edu> LKML-Reference: <20091005102306.GA7889@linux-sh.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Arjan van de Ven 提交于
There are reasons for kernel code to ask for, and use, performance counters. For example, in CPU freq governors this tends to be a good idea, but there are other examples possible as well of course. This patch adds the needed bits to do enable this functionality; they have been tested in an experimental cpufreq driver that I'm working on, and the changes are all that I needed to access counters properly. [fweisbec@gmail.com: added pid to perf_event_create_kernel_counter so that we can profile a particular task too TODO: Have a better error reporting, don't just return NULL in fail case.] v2: Remove the wrong comment about the fact perf_event_create_kernel_counter must be called from a kernel thread. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: "K.Prasad" <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Avi Kivity <avi@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Avi Kivity <avi@redhat.com> LKML-Reference: <20090925122556.2f8bd939@infradead.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 18 10月, 2009 1 次提交
-
-
由 Frederic Weisbecker 提交于
Conflicts: kernel/Makefile kernel/trace/Makefile kernel/trace/trace.h samples/Makefile Merge reason: We need to be uptodate with the perf events development branch because we plan to rewrite the breakpoints API on top of perf events.
-
- 17 10月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
In each case, if the NULL test on thread is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 10月, 2009 29 次提交
-
-
由 Ingo Molnar 提交于
Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Américo Wang noticed that we have a locking imbalance in the error paths of ftrace_profile_set_filter(), causing potential leakage of event_mutex. Also clean up other error codepaths related to event_mutex while at it. Plus fix an initialized variable in the subsystem filter code. Reported-by: NAmérico Wang <xiyou.wangcong@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Add a new option "--filter <filter_str>" to perf record, and it should be right after "-e trace_point": #./perf record -R -f -e irq:irq_handler_entry --filter irq==18 ^C # ./perf trace perf-4303 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 See Documentation/trace/events.txt for the syntax of filter expressions. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4AD6955F.90602@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
- Add an ioctl to allocate a filter for a perf event. - Free the filter when the associated perf event is to be freed. - Do the filtering in perf_swevent_match(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4AD69546.8050401@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
"==" will always do a full match, and "~" will do a glob match. In the future, we may add "=~" for regex match. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4AD69528.3050309@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Change: for_each_pred for_each_subsystem To: for_each_subsystem for_each_pred This change also prepares for later patches. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4AD69502.8060903@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: to add event filter support we need the following commits from the tracing tree: 3f6fe06d: tracing/filters: Unify the regex parsing helpers 1889d209: tracing/filters: Provide basic regex support 737f453f: tracing/filters: Cleanup useless headers Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The (char *) for all the static strings was a fix for the symptom and not the disease. The real issue was that the function prototypes needed to be declared "const char *". Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194400.635935008@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The opterators '-' and '+' are not handled in the trace print format. To do: '++' and '--'. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194400.330843045@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Add the irqs disabled, preemption count, need resched, and other info that is shown in the latency format of ftrace. # perf trace -l perf-16457 2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f perf-16457 2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f perf-16457 2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889 Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194400.076588953@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The ftrace output events can have either arguments or no arguments. The parser needs to be able to handle both. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194359.790221427@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The bprintk parsing was broken in more ways than one. The file parsing was incorrect, and the words used by the arguments are always 4 bytes aligned, even on 64-bit machines. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194359.520931637@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Even though an event may fail to parse, we should not kill the entire report. The trace should still be able to show what it can. If an event fails to parse, a warning is printed, and the output continues. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194359.190809589@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The trace format files now have a "signed" field. But we should still be able to handle the kernels that do not have this field. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.888239553@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
New lines between args in the trace format can break the parsing. This should not be the case. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.637991808@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The '*' is currently only treated as a multiplication, and it needs to be handled as a typecast pointer. This is the version used by trace-cmd. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.409327875@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The array used by the ftrace stack events (caller[x]) causes issues with the parser. This adds code to handle the case, but it also assumes that the array is of type long. Note, this is a special case used (currently) only by the ftrace user and kernel stack records. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.124833639@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The code to handle the '<' and '>' ops was all in place, but they were not in the switch statement to consider them as valid ops. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194357.807434040@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The handling of backslashes was broken. It would stop parsing when encountering one. Also, '\n', '\t', '\r' and '\\' were not converted. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194357.521974680@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
kmem_alloc ftrace event format had a string that was broken up by two tokens. "string 1" "string 2". This patch lets the parser be able to handle the concatenation. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194357.253818714@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: pick up tools/perf/ changes from upstream. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
-
由 Linus Torvalds 提交于
* branch 'tty-fixes': tty: use the new 'flush_delayed_work()' helper to do ldisc flush workqueue: add 'flush_delayed_work()' to run and wait for delayed work Make flush_to_ldisc properly handle parallel calls
-
由 Linus Torvalds 提交于
Merge branch 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: linker script syntax nits
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: watchdog: Fix rio watchdog probe function sparc64: Set IRQF_DISABLED on LDC channel IRQs. sparc64: Fix D-cache flushing on swapin from SW devices. sparc64: Fix niagara2 perf IRQ bits.
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] sclp_vt220 build fix [S390] cio: change misleading console logic [S390] call home support: fix proc handler [S390] dasd: use idal for device characteristics [S390] Add highgprs facility to /proc/cpuinfo [S390] dasd: fix locking bug [S390] tape390: Fix request queue handling in block driver [S390] hypfs: Use subcode 6 if subcode 7 is not available
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix a TRACE_IRQS_OFF typo. sh: Optimize the setup_rt_frame() I-cache flush. sh: Populate initial secondary CPU info from boot_cpu_data. sh: Tidy up SMP cpuinfo. sh: Use boot_cpu_data for FPU tests in sigcontext paths. sh: ftrace: Fix up syscall tracepoint support. sh: force dcache flush if dcache_dirty bit set. sh: update die() output.
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: oprofile: warn on freeing event buffer too early oprofile: fix race condition in event_buffer free lockdep: Use cpu_clock() for lockstat
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf events: Update MAINTAINERS entry file patterns perf tools: Remove static debugfs path from parse-events perf tools: Fix the NO_64BIT build on pure 64-bit systems perf tools: Fix const char type propagation
-