- 06 7月, 2008 5 次提交
-
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
flush delay is used as an external storage for net.ipv4.route.flush sysctl entry. It is write-only. The ctl_table->data for this entry is used once. Fix this case to point to the stack to remove global variable. Do this to avoid additional variable on struct net in the next patch. Possible race (as it was before) accessing this local variable is removed using flush_mutex. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This is required to pass namespace context into rt_cache_flush called from ->flush_cache. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2008 10 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
ip{,v6}_mroute_{set,get}sockopt() should not matter by optimization but it would be better not to depend on optimization semantically. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
Same as ip6_mr_init(), make ip_mr_init() return errno if fails. But do not do error handling in inet_init(), just print a msg. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
If do not do it, we will get following issues: 1. Leaving junks after inet6_init failing halfway. 2. Leaving proc and notifier junks after ipv6 modules unloading. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Outgoing interface is selected by the route decision if unspecified. Let's prefer routes via interface(s) with the address assigned if we have multiple routes with same cost. With help from Naohiro Ooiwa <nooiwa@miraclelinux.com>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
- If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.htmlSigned-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Handle interface property strictly when looking up a route for the loopback address (RFC4291 2.5.3). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
RFC4291 2.5.2. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Check the type of the address when adding a new one on interface. - the unspecified address (::) is always disallowed (RFC4291 2.5.2) - the loopback address is disallowed unless the interface is (one of) loopback (RFC4291 2.5.3). - multicast addresses are disallowed. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Pavel Emelyanov 提交于
There are some places in TCP that select one MIB index to bump snmp statistics like this: if (<something>) NET_INC_STATS_BH(<some_id>); else if (<something_else>) NET_INC_STATS_BH(<some_other_id>); ... else NET_INC_STATS_BH(<default_id>); or in a more tricky but still similar way. On the other hand, this NET_INC_STATS_BH is a camouflaged increment of percpu variable, which is not that small. Factoring those cases out de-bloats 235 bytes on non-preemptible i386 config and drives parts of the code into 80 columns. add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-235 (-235) function old new delta tcp_fastretrans_alert 1437 1424 -13 tcp_dsack_set 137 124 -13 tcp_xmit_retransmit_queue 690 676 -14 tcp_try_undo_recovery 283 265 -18 tcp_sacktag_write_queue 1550 1515 -35 tcp_update_reordering 162 106 -56 tcp_retransmit_timer 990 904 -86 Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2008 3 次提交
-
-
由 Santwona Behera 提交于
Added new interfaces to ethtool to configure receive network flow distribution across multiple rx rings using hashing. Signed-off-by: NSantwona Behera <santwona.behera@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Socket options SCTP_GET_PEER_ADDR_OLD, SCTP_GET_PEER_ADDR_NUM_OLD, SCTP_GET_LOCAL_ADDR_OLD, and SCTP_GET_PEER_LOCAL_ADDR_NUM_OLD have been replaced by newer versions a since 2005. It's time to officially deprecate them and schedule them for removal. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert the sysctl values for icmp ratelimit to use milliseconds instead of jiffies which is based on kernel configured HZ. Internal kernel jiffies are not a proper unit for any userspace API. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2008 13 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
The commit 77d16f45 ("[IPV6] ROUTE: Unify RT6_F_xxx and RT6_SELECT_F_xxx flags") intended to pass various routing lookup hints around RT6_LOOKUP_F_xxx flags, but conversion was missing for rt6_device_match(). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
There is a missing "!" in a conditional statement which is causing entries to be skipped when dumping the default IPv6 static label entries. This can be demonstrated by running the following: # netlabelctl unlbl add default address:::1 \ label:system_u:object_r:unlabeled_t:s0 # netlabelctl -p unlbl list ... you will notice that the entry for the IPv6 localhost address is not displayed but does exist (works correctly, causes collisions when attempting to add duplicate entries, etc.). Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eli Cohen 提交于
When an SKB cannot be chained to a session, the current code attempts to "restore" its ip_summed field from lro_mgr->ip_summed. However, lro_mgr->ip_summed does not hold the original value; in fact, we'd better not touch skb->ip_summed since it is not modified by the code in the path leading to a failure to chain it. Also use a cleaer comment to the describe the ip_summed field of struct net_lro_mgr. Issue raised by Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The problem is that while we work w/o the inet_frags.lock even read-locked the secret rebuild timer may occur (on another CPU, since BHs are still disabled in the inet_frag_find) and change the rnd seed for ipv4/6 fragments. It was caused by my patch fd9e6354 ([INET]: Omit double hash calculations in xxx_frag_intern) late in the 2.6.24 kernel, so this should probably be queued to -stable. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julius Volz 提交于
Fix some doc comments to match function and attribute names in net/netlink/attr.c. Signed-off-by: NJulius Volz <juliusv@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
I found another case where we are sending information to userspace in the wrong HZ scale. This should have been fixed back in 2.5 :-( This means an ABI change but as it stands there is no way for an application like ss to get the right value. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Commit d62733c8 ([SCHED]: Qdisc changes and sch_rr added for multiqueue) added a NET_SCH_RR option that was unused since the code went unconditionally into sch_prio. Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Note, in the following patch, 'err' is initialized as: int err = -ENOBUFS; Signed-off-by: NWANG Cong <wcong@critical-links.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rainer Weikusat 提交于
For n:1 'datagram connections' (eg /dev/log), the unix_dgram_sendmsg routine implements a form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for PF_UNIX non-stream sockets connected to server sockets dealing with (potentially) multiple clients if the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_recvmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: NRainer Weikusat <rweikusat@mssgmbh.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Octavian Purdila 提交于
If an skb has nr_frags set to zero but its frag_list is not empty (as it can happen if software LRO is enabled), and a previous tcp_read_sock has consumed the linear part of the skb, then __skb_splice_bits: (a) incorrectly reports an error and (b) forgets to update the offset to account for the linear part Any of the two problems will cause the subsequent __skb_splice_bits call (the one that handles the frag_list skbs) to either skip data, or, if the unadjusted offset is greater then the size of the next skb in the frag_list, make tcp_splice_read loop forever. Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Miquel van Smoorenburg 提交于
The tcp_mem array which contains limits on the total amount of memory used by TCP sockets is calculated based on nr_all_pages. On a 32 bits x86 system, we should base this on the number of lowmem pages. Signed-off-by: NMiquel van Smoorenburg <miquels@cistron.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emmanuel Grumbach 提交于
This patch fixes an oops in several failure paths in key allocation. This Oops occurs when freeing a key that has not been linked yet, so the key->sdata is not set. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 6月, 2008 9 次提交
-
-
由 Johannes Berg 提交于
This patch fixes TX fragmentation caused by tx handlers reordering and 'tx info to cb' patches Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch makes the mac80211 workqueue freezable making it interact a bit better with system suspend and not try to ping the AP while the hardware is down. This doesn't really help with implementing proper suspend in any way but makes some bad things trigger less. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch add phy information to giwname. Quoting: It's not useless, it's supposed to tell you about the protocol capability of the device, like "IEEE 802.11b" or "IEEE 802.11abg" Jean Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch updates the authentication method upon giwencode ioctl. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch avoids returning -EINVAL upon iwconfig wlan0 rts auto. If rts->fixed is 0, then we should choose a default value instead of failing. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-