- 06 11月, 2014 1 次提交
-
-
由 Alexander Aring 提交于
The include/net/nl802154.h file contains a lot of prototypes which are not used inside of ieee802154 subsystem. This patch removes this file and make the only one used prototype "ieee802154_nl_start_confirm" as static declaration in ieee802154/nl-mac.c Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 02 11月, 2014 2 次提交
-
-
由 Alexander Aring 提交于
All PHY attributes should be directly set to the transceiver after netlink. MAC attributes should be set by interface up. Currently the macparams netlink cmd contains mixed attributes of phy and mac settings. This patch moves all phy settings to the netlink receive function for setting macparams. This is the only way which doesn't change the userspace API and keep the deprecated netlink interface alive. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves the setting of hardware extended address filtering inside of interface up instead doing it directly inside of netlink interface. Also we don't need to set the sdata extended attribute in netlink. This is already done by ndo_set_mac_address of net_device_ops. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 29 10月, 2014 1 次提交
-
-
由 Alexander Aring 提交于
These functions can be static in mac_cmd file. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 26 10月, 2014 6 次提交
-
-
由 Alexander Aring 提交于
This function adds a wrapper to call netdev_priv to getting the sdata attribute. This is similar like the IEEE80211_DEV_TO_SUB_IF function inside wireless stack implementation. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch renames the hw attribute in struct ieee802154_sub_if_data to local. This avoid confusing with the struct ieee802154_hw hw; inside of local struct. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
Like wireless this structure should named ieee802154_sub_if_data and not mac802154_sub_if_data. This patch renames the struct and variables to sdata instead priv sometimes. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves the ieee802154 header into include/linux instead include/net. Similar like wireless which have the ieee80211 header inside of include/linux. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
The wpan-phy header contains the wpan_phy struct information. Later this header will be have similar function like cfg80211 header. The cfg80211 header contains the wiphy struct which is identically the wpan_phy struct inside 802.15.4 subsystem. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves the mac802154.h internal header to ieee802154_i.h like the wireless stack ieee80211_i.h file. This avoids confusing with the not internal header include/net/mac802154.h header. Additional we get the same naming conversion like mac80211 for this file. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 25 10月, 2014 1 次提交
-
-
由 Alexander Aring 提交于
This patch removes the FSF address in files which belongs to ieee802154 and mac802154. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 17 5月, 2014 2 次提交
-
-
由 Phoebe Buckheister 提交于
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phoebe Buckheister 提交于
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2014 1 次提交
-
-
由 Phoebe Buckheister 提交于
Commit 9b2777d6 (ieee802154: add TX power control to wpan_phy) and following erroneously added CSMA and CCA parameters for 802.15.4 devices as PHY parameters, while they are actually MAC parameters and can differ for any two WPAN instances. Since it is now sensible to have multiple WPAN devices with differing CSMA/CCA parameters, make these parameters MAC parameters instead. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2014 3 次提交
-
-
由 Phoebe Buckheister 提交于
Change all internal uses of ieee802154_addr_sa to ieee802154_addr, except for those instances that communicate directly with userspace. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phoebe Buckheister 提交于
Enable sparse warnings about endianness, replace the remaining fields regarding network operations without explicit endianness annotations with such that are annotated, and propagate this through the entire stack. Uses of ieee802154_addr_sa are not changed yet, this patch is only concerned with all other fields (such as address filters, operation parameters and the likes). Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phoebe Buckheister 提交于
The struct as currently defined uses host byte order for some fields, and most big endian/EUI display byte order for other fields. Inside the stack, endianness should ideally match network byte order where possible to minimize the number of byteswaps done in critical paths, but this patch does not address this; it is only preparatory. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2013 1 次提交
-
-
由 Tony Cheneau 提交于
Bring-over mac802154_dev_get_dsn() function that was present in the Linux ZigBee kernel. This function is called by the 6LoWPAN code in order to properly set the DSN (Data Sequence Number) value in the IEEE 802.15.4 frame. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 2 次提交
-
-
Make symbols static to avoid the following warning shown up by sparse: warning: symbol ... was not declared. Should it be static? Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add method to get the device short 802.15.4 address. This call needed by ieee802154 layer to satisfy 'iz list' request from the user space. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 2 次提交
-
-
Basic preparations to start the interface. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Every real 802.15.4 transceiver, which works with software MAC layer, can be classified as a wpan device in this stack. So the wpan device implementation provides missing link in datapath between the device drivers and the Linux network queue. According to the IEEE 802.15.4 standard each packet can be one of the following types: - beacon - MAC layer command - ACK - data This patch adds support for the data packet-type only, but this is enough to perform data transmission and receiving over radio. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2012 1 次提交
-
-
Declare set of MAC-commands for reduced functionality interface. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 6月, 2009 1 次提交
-
-
由 Sergey Lapin 提交于
Add support for communication over IEEE 802.15.4 networks. This implementation is neither certified nor complete, but aims to that goal. This commit contains only the socket interface for communication over IEEE 802.15.4 networks. One can either send RAW datagrams or use SOCK_DGRAM to encapsulate data inside normal IEEE 802.15.4 packets. Configuration interface, drivers and software MAC 802.15.4 implementation will follow. Initial implementation was done by Maxim Gorbachyov, Maxim Osipov and Pavel Smolensky as a research project at Siemens AG. Later the stack was heavily reworked to better suit the linux networking model, and is now maitained as an open project partially sponsored by Siemens. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NSergey Lapin <slapin@ossfans.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-