- 29 1月, 2013 2 次提交
-
-
由 Hiroshi Doyu 提交于
Add a new evaluation board, Pluto for Tegra 114 family. Signed-off-by: NHiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
由 Hiroshi Doyu 提交于
Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: NHiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 22 12月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
Commit db5b0ae0 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc") causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 12月, 2012 1 次提交
-
-
由 Maxime Ripard 提交于
There is several different SoCs sharing the sun5i codename: A10s, A12 and A13. Since there is enough differences to not consider those the same SoCs, change a bit the naming scheme to reflect this. Moreover, some boards like the olinuxino come in A10s and A13 variants, which also share the same SoC codename. So change the naming scheme to reflect both the codename and the market name of the SoCs used in the dtsi and in the board files Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 15 12月, 2012 1 次提交
-
-
由 Jon Hunter 提交于
Commit 0d9250c4 (ARM: dts: omap4-panda: Add pinmux configuration for HDMI) added a new device-tree source file for Rev A4 of the OMAP4430 Panda board but it did not add this version to the makefile. Hence, add this file to the makefile. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 04 12月, 2012 1 次提交
-
-
由 Grant Likely 提交于
The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NOlof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 27 11月, 2012 1 次提交
-
-
由 Fabio Baltieri 提交于
This adds hrefprev60, hrefv60plus and ccu9540 to device trees compiled during build. Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
-
- 26 11月, 2012 1 次提交
-
-
由 Shiraz Hashim 提交于
This adds support for SPEAr320-HMI board. Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
-
- 22 11月, 2012 9 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Kukjin Kim 提交于
This patch adds initial dts file for EXYNOS5440 SoC and adds the dts file for SSDK5440 board which is a kind of reference board. More properties will be added later. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Petazzoni 提交于
This commit converts the 'LaCie Ethernet Disk mini v2' board to the Device Tree. All devices that have existing Device Tree bindings are converted over to the Device Tree, the other devices remain instantiated in the old way, until the respective drivers get the needed Device Tree bindings. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested by: Maxime Hadjinlian <mhadjinlian@lacie.com> Acked-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Stefan Peter 提交于
Signed-off-by: NStefan Peter <s.peter@mpl.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Tero Jaasko 提交于
Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Jason Cooper 提交于
This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: NJason Cooper <jason@lakedaemon.net> Acked-by: NAndrew Lunn <andrew@lunn.ch> Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-
由 Simon Guinot 提交于
This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Simon Guinot 提交于
This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Simon Guinot 提交于
This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 21 11月, 2012 1 次提交
-
-
由 Doug Anderson 提交于
This dts file is based on the Snow dts file in the Chromium OS kernel tree with the following changes: * Some details have been updated to match the exynos5250-smdk5250.dts file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9). * This file doesn't include references to hardware whose upstream support isn't quite there yet. That includes most i2c devices. Note that most i2c busses have been included with no devices. The Snow dts file is mostly just an include of the "cros5250" dts file which describes a class of similar boards. Support for other boards has not yet been send upstream. With this file and a change to use UART3 for serial output I can: * Boot to a command line using either SD or EMMC as a root filesystem * See the power button and lid switch using evtest. Signed-off-by: NDoug Anderson <dianders@chromium.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 20 11月, 2012 4 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the Cubieboard based on the Allwinner A10/sun4i SoC. Currently only UART is supported. Other devices will eventually follow. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Marek Vasut 提交于
Add DTS file for this custom board. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Christian Daudt 提交于
In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: NChristian Daudt <csd@broadcom.com> Reviewed-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
The dtb targets belong in arch/arm/boot/dts/Makefile now, so move the newly added davinci targets there. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 19 11月, 2012 3 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
CPU Module with ATMEL AT91SAM9G45 http://www.ronetix.at/pm9g45.htmlSigned-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 17 11月, 2012 1 次提交
-
-
由 Maxime Ripard 提交于
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 16 11月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 14 11月, 2012 2 次提交
-
-
由 Gregory CLEMENT 提交于
This platform, available from Globalscale has an Armada 370. For now, only the serial port is supported. Support for network, USB and other peripherals will be added as drivers for them become available for Armada 370 in mainline. Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> --- This is 3.8 material. Changes from original version posted by Gregory: * Renamed .dts file to armada-370-mirabox.dts * Change compatible string to 'globalscale,mirabox' * Remove compatible string from armada-370-xp.c * Removed references to MBX0001
-
由 Thomas Petazzoni 提交于
This platform, available in Japan from PlatHome, has a dual-core Armada XP, the MV78260. For now, only the two serial ports and the three front LEDs are supported. Support for SMP, network, SATA, USB and other peripherals will be added as drivers for them become available for Armada XP in mainline. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: NGregory CLEMENT <gregory.clement@free-electrons.com> --- This is 3.8 material. Changes since v2: * Renamed the .dts file to armada-xp-openblocks-ax3-4.dts * Removed the compatible string from armada-370-xp.c (which now only lists the common SoC compatible string) Changes since v1: * Renamed the board to OpenBlocks AX3-4, since there is a variant called AX3-2 which has less RAM, and no mini PCIe port. Requested by Andrew Lunn. * Fix the amount of memory to 3 GB. In fact, the board has 1 GB soldered, and 2 GB in a SODIMM slot (which is therefore removable). But as the board is delivered as is, we'll assume it has 3 GB of memory by default.
-
- 12 11月, 2012 1 次提交
-
-
由 Josh Cartwright 提交于
The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107 device tree, since it is not hardware anyone can purchase. Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the dts/Makefile so it is built with the 'dtbs' target. Signed-off-by: NJosh Cartwright <josh.cartwright@ni.com> Acked-by: NMichal Simek <michal.simek@xilinx.com>
-
- 07 11月, 2012 2 次提交
-
-
由 Thomas Abraham 提交于
Add a minimal board dts file for Samsung EXYNOS4412 based SMDK board. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Benoit Cousson 提交于
The EVMSK was not built with the 'make dtbs' command. Add the missing entry in the dts Makefile. Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
-
- 01 11月, 2012 2 次提交
-
-
由 Gwenhael Goavec-Merou 提交于
The APF28Dev is a docking board for an APF28 SOM Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: NJulien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Rob Herring 提交于
Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 30 10月, 2012 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Use DT_MACHINE_START() on the sh7372 based mackerel board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 29 10月, 2012 2 次提交
-
-
由 Benoit Cousson 提交于
Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
-
由 Jon Hunter 提交于
Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
-
- 19 10月, 2012 1 次提交
-
-
由 Julien Boibessot 提交于
The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: NJulien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 16 10月, 2012 1 次提交
-
-
由 Linus Walleij 提交于
This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 13 10月, 2012 1 次提交
-
-
Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-