NFP LMEM is a large, indirectly accessed register file.  There
are two basic indirect access registers.  Each access operation
may either use offset (up to 8 or 16 words) or perform post
decrement/increment.

Add encodings of LMEM indexes as instruction operands.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to add longer OP_* defines, move the values away.
Purely whitespace commit.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Temporarily drop support for skb->mark.  We are primarily focusing
on XDP offload, and implementing skb->mark on the new datapath has
lower priority.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the register renumbering optimization.  To implement calling
map and other helpers we need more strict register layout.  We can't
freely reassign register numbers.

This will have the effect of running in 4 context/thread mode, which
should be OK since we are moving towards integrating the BPF closer
with FW app datapath anyway, and the target datapath itself runs in
4 context mode.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add encodings of all 64bit shift operations.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the software reg helpers and some static data to nfp_asm.c.
They are related to the previous patch, but move is done in a separate
commit for ease of review.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define a new __bitwise type for software representation of registers.
This will allow us to catch incorrect parameter types using sparse.

Accessors we define also allow us to return correct enum type and
therefore ensure all switches handle all register types.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Limiting the eBPF offload to a single port was a workaround
required for the PoC application FW which has not been
released externally.  It's not necessary any more.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use standard devlink trace point to allow tracing of control
messages.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yunsheng Lin says:

====================
A few cleanup for hns3 ethernet driver

This patchset contains a few cleanup for hns3 ethernet driver.
No functional change intended.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following warning from sparse:
warning: symbol 'hns3_set_multicast_list' was not declared.
Should it be static.

hns3_set_multicast_list turns out to be not used, so delete it.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a lot of endian issues detected by sparse.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The hclge_tm module has already added _cmd to the end of struct
that used to send cmd to firmware. This will help us finding the
endian issues.
This patch adds the _cmd to the end of struct that used to send
cmd to firmware in hclge_main module.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch uses GENMASK to generate bit mask whenever
possible in hns3 driver.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a few indentation for Kconfig file in the
hisilicon folder.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are many places that will need to get the handle
of netdev, so add a macro to get the handle of netdev.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a shifting true in hclge_main module.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dcb_app priority is unsigned thus checking whether it is less than zero
is redundant.
Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com>
Acked-By: NTomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Many macros in dwmac-ipq806x are unused and should be removed.
Moreover gmac->id is an unsigned variable and therefore checking
whether it is less than zero is redundant.
Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
ipv6: ipv6_dev_get_saddr() rcu works

Sending IPv6 udp packets on non connected sockets is quite slow,
because ipv6_dev_get_saddr() is still using an rwlock and silly
references games on ifa.

Tested:

$ ./super_netperf 16 -H 4444::555:0786 -l 2000 -t UDP_STREAM -- -m 100 &
[1] 12527

Performance is boosted from 2.02 Mpps to 4.28 Mpps

Kernel profile before patches :
  22.62%  [kernel]  [k] _raw_read_lock_bh
   7.04%  [kernel]  [k] refcount_sub_and_test
   6.56%  [kernel]  [k] ipv6_get_saddr_eval
   5.67%  [kernel]  [k] _raw_read_unlock_bh
   5.34%  [kernel]  [k] __ipv6_dev_get_saddr
   4.95%  [kernel]  [k] refcount_inc_not_zero
   4.03%  [kernel]  [k] __ip6addrlbl_match
   3.70%  [kernel]  [k] _raw_spin_lock
   3.44%  [kernel]  [k] ipv6_dev_get_saddr
   3.24%  [kernel]  [k] ip6_pol_route
   3.06%  [kernel]  [k] refcount_add_not_zero
   2.30%  [kernel]  [k] __local_bh_enable_ip
   1.81%  [kernel]  [k] mlx4_en_xmit
   1.20%  [kernel]  [k] __ip6_append_data
   1.12%  [kernel]  [k] __ip6_make_skb
   1.11%  [kernel]  [k] __dev_queue_xmit
   1.06%  [kernel]  [k] l3mdev_master_ifindex_rcu

Kernel profile after patches :
  11.36%  [kernel]  [k] ip6_pol_route
   7.65%  [kernel]  [k] _raw_spin_lock
   7.16%  [kernel]  [k] __ipv6_dev_get_saddr
   6.49%  [kernel]  [k] ipv6_get_saddr_eval
   6.04%  [kernel]  [k] refcount_add_not_zero
   3.34%  [kernel]  [k] __ip6addrlbl_match
   2.62%  [kernel]  [k] __dev_queue_xmit
   2.37%  [kernel]  [k] mlx4_en_xmit
   2.26%  [kernel]  [k] dst_release
   1.89%  [kernel]  [k] __ip6_make_skb
   1.87%  [kernel]  [k] __ip6_append_data
   1.86%  [kernel]  [k] udpv6_sendmsg
   1.86%  [kernel]  [k] ip6t_do_table
   1.64%  [kernel]  [k] ipv6_dev_get_saddr
   1.64%  [kernel]  [k] find_match
   1.51%  [kernel]  [k] l3mdev_master_ifindex_rcu
   1.24%  [kernel]  [k] ipv6_addr_label
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By extending the rcu section a bit, we can avoid these
very expensive in6_ifa_put()/in6_ifa_hold() calls
done in __ipv6_dev_get_saddr() and ipv6_dev_get_saddr()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Callers hold rcu_read_lock(), so we do not need
the rcu_read_lock()/rcu_read_unlock() pair.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet6_ifa_finish_destroy() already uses kfree_rcu() to free
inet6_ifaddr structs.

We need to use proper list additions/deletions in order
to allow readers to use RCU instead of idev->lock rwlock.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Roopa Prabhu says:

====================
bridge: neigh msg proxy and flood suppression support

This series implements arp and nd suppression in the bridge
driver for ethernet vpns. It implements rfc7432, section 10
https://tools.ietf.org/html/rfc7432#section-10
for ethernet VPN deployments. It is similar to the existing
BR_PROXYARP* flags but has a few semantic differences to conform
to EVPN standard. Unlike the existing flags, this new flag suppresses
flood of all neigh discovery packets (arp and nd) to tunnel ports.
Supports both vlan filtering and non-vlan filtering bridges.

In case of EVPN, it is mainly used to avoid flooding
of arp and nd packets to tunnel ports like vxlan.

v2 : rebase to latest + address some optimization feedback from Nikolay.
v3 : fix kbuild reported build errors with CONFIG_INET off
v4 : simplify port flag mask as suggested by stephen
v5 : address some feedback from Toshiaki
v6 : some v5 cleanups in nd suppress (keep it consistent with arp suppress)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch avoids flooding and proxies ndisc packets
for BR_NEIGH_SUPPRESS ports.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch avoids flooding and proxies arp packets
for BR_NEIGH_SUPPRESS ports.

Moves existing br_do_proxy_arp to br_do_proxy_suppress_arp
to support both proxy arp and neigh suppress.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new bridge port flag BR_NEIGH_SUPPRESS to
suppress arp and nd flood on bridge ports. It implements
rfc7432, section 10.
https://tools.ietf.org/html/rfc7432#section-10
for ethernet VPN deployments. It is similar to the existing
BR_PROXYARP* flags but has a few semantic differences to conform
to EVPN standard. Unlike the existing flags, this new flag suppresses
flood of all neigh discovery packets (arp and nd) to tunnel ports.
Supports both vlan filtering and non-vlan filtering bridges.

In case of EVPN, it is mainly used to avoid flooding
of arp and nd packets to tunnel ports like vxlan.

This patch adds netlink and sysfs support to set this bridge port
flag.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido reported following splat and provided a patch.

[  122.221814] BUG: using smp_processor_id() in preemptible [00000000] code: sshd/2672
[  122.221845] caller is debug_smp_processor_id+0x17/0x20
[  122.221866] CPU: 0 PID: 2672 Comm: sshd Not tainted 4.14.0-rc3-idosch-next-custom #639
[  122.221880] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  122.221893] Call Trace:
[  122.221919]  dump_stack+0xb1/0x10c
[  122.221946]  ? _atomic_dec_and_lock+0x124/0x124
[  122.221974]  ? ___ratelimit+0xfe/0x240
[  122.222020]  check_preemption_disabled+0x173/0x1b0
[  122.222060]  debug_smp_processor_id+0x17/0x20
[  122.222083]  ip6_pol_route+0x1482/0x24a0
...

I believe we can simplify this code path a bit, since we no longer
hold a read_lock and need to release it to avoid a dead lock.

By disabling BH, we make sure we'll prevent code re-entry and
rt6_get_pcpu_route()/rt6_make_pcpu_route() run on the same cpu.

Fixes: 66f5d6ce ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Tested-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 updates 2017-10-06

This series includes some shared code updates for kernel 4.15 to both
net-next and rdma-next trees.

The series includes mlx5 low level flow steering updates and optimizations
to support firmware command parallelism for flow steering requests from
Maor Gottlieb and two other small fixes from Matan and Maor.

One fix from Matan adds error handling for when the destination
list of the flow steering rule is full.

Maor introduced a patch to avoid NULL pointer dereference on steering cleanup.

Then Some refactoring patches needed by the series for code sharing purposes.
and split the Flow Table Entry (FTE) and Flow Group (FG) creation code to two parts:
    1) Object allocation - allocate the steering node and initialize
    its resources.

    2) The firmware command execution.

This change will give us the ability to take write lock on the
parent node (e.g. FG for FTE creating) only on the software data struct allocation
and creation part of the procedure where the synchronization is really required,
and will allow us to execute multiple firmware commands simultaneously and overcome the
firmware bottleneck.

Refactor the locking scheme of the mlx5 core flow steering as follows:

1) Replace the mutex lock with readers-writers semaphore and take
    the write lock only when necessary (e.g. allocating a new flow
    table entry index or adding a node to the parent's children list).
    When we try to find a suitable child in the parent's children list
    (e.g. search for flow group with the same match_criteria of the rule)
    then we only take the read lock.

2) Add versioning mechanism - each steering entity (FT, FG, FTE, DST)
    will have an incremental version. The version is increased when the
    entity is changed (e.g. when a new FTE was added to FG - the FG's
    version is increased).
    Versioning is used in order to determine if the last traverse of an
    entity's children is valid or a rescan under write lock is required.

Last patch adds FGs and FTEs memory pool, It is useful because these objects
are not small and could be allocated/deallocated many times.

This support improves the insertion rate of steering rules
from ~5k/sec to ~40k/sec.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Haiyang Zhang says:

====================
hv_netvsc: support changing TCP hash level

The patch set simplifies the existing hash level switching code for
UDP. It also adds the support for changing TCP hash level. So users
can switch between L3 an L4 hash levels for TCP and UDP.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update Documentation/networking/netvsc.txt for TCP hash level setting
and related info.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch supports the options to switch TCP hash level between
L3 and L4 by ethtool command. TCP over IPv4 and v6 can be set
differently. The default hash level is L4. We currently only
allow switching TX hash level from within the guests.

For example, for TCP over IPv4 on eth0:
To include TCP port numbers in hashing:
	ethtool -N eth0 rx-flow-hash tcp4 sdfn
To exclude TCP port numbers in hashing:
	ethtool -N eth0 rx-flow-hash tcp4 sd
To show TCP hash level:
	ethtool -n eth0 rx-flow-hash tcp4
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This simplifies the logic and make it easier to add more
options.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Add more extack error reporting

Ido says:

Add error messages to VLAN and bridge enslavements to help users
understand why the enslavement failed.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code that actually takes care of bridge offload introduces a few
more non-trivial constraints with regards to bridge enslavements.
Propagate extack there to indicate the reason.

$ ip link add link enp1s0np1 name enp1s0np1.10 type vlan id 10
$ ip link add link enp1s0np1 name enp1s0np1.20 type vlan id 20
$ ip link add name br0 type bridge
$ ip link set dev enp1s0np1.10 master br0
$ ip link set dev enp1s0np1.20 master br0
Error: spectrum: Can not bridge VLAN uppers of the same port.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to physical ports, enslavement of VLAN devices can also fail.
Use extack to indicate why the enslavement failed.

$ ip link add link enp1s0np1 name enp1s0np1.10 type vlan id 10
$ ip link add name bond0 type bond mode 802.3ad
$ ip link set dev enp1s0np1.10 master bond0
Error: spectrum: VLAN devices only support bridge and VRF uppers.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Martin KaFai Lau says:

====================
bpf: Misc improvements and a new usage on bpf obj name

The first two patches make improvements on the bpf obj name.

The last patch adds the prog name to kallsyms.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>