Also update the tokenlen calculations to accomodate g_token_size().
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 If the loop errors, we need to exit.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 If someone changes the uid/gid mapping in userland, then we do eventually
 want those changes to be propagated to the kernel. Currently the kernel
 assumes that it may cache entries forever.

 Add an expiration time + garbage collector for idmap entries.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 We ought never to be calling xprt_destroy() if there are still active
 rpc_tasks. Optimise away the broken code that attempts to "fix" that case.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 If the server decides to close the RPC socket, we currently don't actually
 respond until either another RPC call is scheduled, or until xprt_autoclose()
 gets called by the socket expiry timer (which may be up to 5 minutes
 later).

 This patch ensures that xprt_autoclose() is called much sooner if the
 server closes the socket.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 inode->i_mode contains a lot more than just the mode bits. Make sure that
 we mask away this extra stuff in SETATTR calls to the server.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
 client, sets cl_chatty.  There's no reason why NLM shouldn't set it, so
 just get rid of cl_chatty and always be verbose.

 Test-plan:
 Compile with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 At some point, transport endpoint addresses will no longer be IPv4.  To hide
 the structure of the rpc_xprt's address field from ULPs and port mappers,
 add an API for setting the port number during an RPC bind operation.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
 Probably need to rig a server where certain services aren't running, or
 that returns an error for some typical operation.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 We'd like to hide fields in rpc_xprt and rpc_clnt from upper layer protocols.
 Start by creating an API to force RPC rebind, replacing logic that simply
 sets cl_port to zero.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
 Probably need to rig a server where certain services aren't running, or
 that returns an error for some typical operation.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Add RPC client transport switch support for replacing buffer management
 on a per-transport basis.

 In the current IPv4 socket transport implementation, RPC buffers are
 allocated as needed for each RPC message that is sent.  Some transport
 implementations may choose to use pre-allocated buffers for encoding,
 sending, receiving, and unmarshalling RPC messages, however.  For
 transports capable of direct data placement, the buffers can be carved
 out of a pre-registered area of memory rather than from a slab cache.

 Test-plan:
 Millions of fsx operations.  Performance characterization with "sio" and
 "iozone".  Use oprofile and other tools to look for significant regression
 in CPU utilization.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Thanks to Ed Keizer for bug and root cause.  He says: "... we could only mount
 the top-level Solaris share. We could not mount deeper into the tree.
 Investigation showed that Solaris allows UNIX authenticated FSINFO only on the
 top level of the share. This is a problem because we share/export our home
 directories one level higher than we mount them. I.e. we share the partition
 and not the individual home directories. This prevented access to home
 directories."

 We still may need to try auth_sys for the case where the client doesn't have
 appropriate credentials.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The procedure that decodes statd sm_notify call seems to be skipping a
 few arguments.  How did this ever work?

 >From folks at Polyserve.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 If the server receives an NLM cancel call and finds no waiting lock to
 cancel, then chances are the lock has already been applied, and the client
 just hadn't yet processed the NLM granted callback before it sent the
 cancel.

 The Open Group text, for example, perimts a server to return either success
 (LCK_GRANTED) or failure (LCK_DENIED) in this case.  But returning an error
 seems more helpful; the client may be able to use it to recognize that a
 race has occurred and to recover from the race.

 So, modify the relevant functions to return an error in this case.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The fl_next check here is superfluous (and possibly a layering violation).
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Currently when lockd gets an NLM_CANCEL request, it also does an unlock for
 the same range.  This is incorrect.

 The Open Group documentation says that "This procedure cancels an
 *outstanding* blocked lock request."  (Emphasis mine.)

 Also, consider a client that holds a lock on the first byte of a file, and
 requests a lock on the entire file.  If the client cancels that request
 (perhaps because the requesting process is signalled), the server shouldn't
 apply perform an unlock on the entire file, since that will also remove the
 previous lock that the client was already granted.

 Or consider a lock request that actually *downgraded* an exclusive lock to
 a shared lock.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Slightly simpler logic here makes it more trivial to verify that the up's
 and down's are balanced here.  Break out an assignment from a conditional
 while we're at it.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 This patch removes ths unused function xdr_decode_string().
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NNeil Brown <neilb@suse.de>
Acked-by: NCharles Lever <Charles.Lever@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and ensure that nfs_update_inode() respects wcc
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Upon return of a write delegation, the server will almost always bump the
 change attribute. Ensure that we pick up that change so that we don't
 invalidate our data cache unnecessarily.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 According to RFC3530 we're supposed to cache the change attribute
 at the time the client receives a write delegation.
 If the inode is clean, a CB_GETATTR callback by the server to the
 client is supposed to return the cached change attribute.
 If, OTOH, the inode is dirty, the client should bump the cached
 change attribute by 1.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and avoid calling set_page_dirty on them
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The SuS states that a call to write() will cause mtime to be updated on
 the file. In order to satisfy that requirement, we need to flush out
 any cached writes in nfs_getattr().
 Speed things up slightly by not committing the writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Most NFS server implementations allow up to 64KB reads and writes on the
 wire.  The Solaris NFS server allows up to a megabyte, for instance.

 Now the Linux NFS client supports transfer sizes up to 1MB, too.  This will
 help reduce protocol and context switch overhead on read/write intensive NFS
 workloads, and support larger atomic read and write operations on servers
 that support them.

 Test-plan:
 Connectathon and iozone on mount point with wsize=rsize>32768 over TCP.
 Tests with NFS over UDP to verify the maximum RPC payload size cap.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 To help NFS users and server developers, make the "inode number mismatch"
 message display more useful information.

 Test-plan:
 None.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 nfs_statfs() generates a log message when GETATTR returns an error.  This
 is usually a useless message.  Make it a dprintk.

 Test plan:
 None
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Minor cleanup:  inlined bit ops in nfs_page.h can be simpler.

 Test plan:
 Write-intensive workload against a server that requires COMMITs.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Red Hat found a problem in the error recovery logic in __init_nfs.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Replace ad hoc write parameter sanity checking in nfs_file_direct_write()
 with a call to generic_write_checks().  This should make the proper checks
 modulo the O_LARGEFILE flag, and should catch NFSv2-specific limitations by
 virtue of i_sb->s_maxbytes.

 Test plan:
 Posix compliance testing with both NFSv2 and NFSv3.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Use a cred from the nfs4_client->cl_state_owners list.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 In RFC3530, the RENEW operation is allowed to use either

 the same principal, RPC security flavour and (if RPCSEC_GSS), the same
  mechanism and service that was used for SETCLIENTID_CONFIRM

 OR

 Any principal, RPC security flavour and service combination that
 currently has an OPEN file on the server.

 Choose the latter since that doesn't require us to keep credentials for
 the same principal for the entire duration of the mount.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Convert private implementations in NFSv4 state recovery and delegation
 code to use kthreads.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Use wait_on_bit() when waiting for state recovery to complete.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Cut down on the number of unnecessary RENEW requests on the wire.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to
 interrupt RPC calls too (as per the Solaris implementation).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>