- 11 6月, 2018 1 次提交
-
-
由 James Hogan 提交于
I soon won't have access to much MIPS hardware, nor enough time to properly maintain MIPS on my own, so add Paul Burton as a co-maintainer. Also add a link to a new shared git repository on kernel.org for linux-next branches and pull request tags. Signed-off-by: NJames Hogan <jhogan@kernel.org> Acked-by: NPaul Burton <paul.burton@mips.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19473/
-
- 24 5月, 2018 1 次提交
-
-
由 Maciej W. Rozycki 提交于
Correct comments across ptrace(2) handlers about an FPU register context layout discrepancy between MIPS I and later ISAs, which was fixed with `linux-mips.org' (LMO) commit 42533948caac ("Major pile of FP emulator changes."), the fix corrected with LMO commit 849fa7a50dff ("R3k FPU ptrace() handling fixes."), and then broken and fixed over and over again, until last time fixed with commit 80cbfad7 ("MIPS: Correct MIPS I FP context layout"). NB running the GDB test suite for the relevant ABI/ISA and watching out for regressions is advisable when poking around ptrace(2). Signed-off-by: NMaciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19326/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 21 5月, 2018 1 次提交
-
-
由 Matt Redfearn 提交于
Assembly language within the MIPS kernel conventionally indents instructions which are in a branch delay slot to make them easier to see. Commit 8483b14a ("MIPS: lib: memset: Whitespace fixes") rather inexplicably removed all of these indentations from memset.S. Reinstate the convention for all instructions in a branch delay slot. This effectively reverts the above commit, plus other locations introduced with MIPSR6 support. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19111/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 15 5月, 2018 19 次提交
-
-
由 Matt Redfearn 提交于
When perf is used in non-system mode, i.e. without specifying CPUs to count on, check_and_calc_range falls into the case when it sets M_TC_EN_ALL in the counter config_base. This has the impact of always counting for all of the threads in a core, even when the user has not requested it. For example this can be seen with a test program which executes 30002 instructions and 10000 branches running on one VPE and a busy load on the other VPE in the core. Without this commit, the expected count is not returned: taskset 4 dd if=/dev/zero of=/dev/null count=100000 & taskset 8 perf stat -e instructions:u,branches:u ./test_prog Performance counter stats for './test_prog': 103235 instructions:u 17015 branches:u In order to fix this, remove check_and_calc_range entirely and perform all of the logic in mipsxx_pmu_enable_event. Since mipsxx_pmu_enable_event now requires the range of the event, ensure that it is set by mipspmu_perf_event_encode in the same circumstances as before (i.e. #ifdef CONFIG_MIPS_MT_SMP && num_possible_cpus() > 1). The logic of mipsxx_pmu_enable_event now becomes: If the CPU is a BMIPS5000, then use the special vpe_id() implementation to select which VPE to count. If the counter has a range greater than a single VPE, i.e. it is a core-wide counter, then ensure that the counter is set up to count events from all TCs (though, since this is true by definition, is this necessary? Just enabling a core-wide counter in the per-VPE case appears experimentally to return the same counts. This is left in for now as the logic was present before). If the event is set up to count a particular CPU (i.e. system mode), then the VPE ID of that CPU is used for the counter. Otherwise, the event should be counted on the CPU scheduling this thread (this was the critical bit missing from the previous implementation) so the VPE ID of this CPU is used for the counter. With this commit, the same test as before returns the counts expected: taskset 4 dd if=/dev/zero of=/dev/null count=100000 & taskset 8 perf stat -e instructions:u,branches:u ./test_prog Performance counter stats for './test_prog': 30002 instructions:u 10000 branches:u Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19138/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
There are a couple of FIXME's in the perf code which state that cpu_data[event->cpu].vpe_id reports 0 for both CPUs. This is no longer the case, since the vpe_id is used extensively by SMP CPS. VPE local counting gets around this by using smp_processor_id() instead. As it happens this does work correctly to count events on the right VPE, but relies on 2 assumptions: a) Always having 2 VPEs / core. b) The hardware only paying attention to the least significant bit of the PERFCTL.VPEID field. If either of these assumptions change then the incorrect VPEs events will be counted. Fix this by replacing smp_processor_id() with cpu_vpe_id(¤t_cpu_data), in the vpe_id() macro, and pass vpe_id() to M_PERFCTL_VPEID() when setting up PERFCTL.VPEID. The FIXME's can also be removed since they no longer apply. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19137/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
The presence of per TC performance counters is now detected by cpu-probe.c and indicated by MIPS_CPU_MT_PER_TC_PERF_COUNTERS in cpu_data. Switch detection of the feature to use this new flag rather than blindly testing the implementation specific config7 register with a magic number. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Richter <rric@kernel.org> Cc: linux-mips@linux-mips.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/19142/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
Processors implementing the MIPS MT ASE may have performance counters implemented per core or per TC. Processors implemented by MIPS Technologies signify presence per TC through a bit in the implementation specific Config7 register. Currently the code which probes for their presence blindly reads a magic number corresponding to this bit, despite it potentially having a different meaning in the CPU implementation. Since CPU features are generally detected by cpu-probe.c, perform the detection here instead. Introduce cpu_set_mt_per_tc_perf which checks the bit in config7 and call it from MIPS CPUs known to implement this bit and the MT ASE, specifically, the 34K, 1004K and interAptiv. Once the presence of the per-tc counter is indicated in cpu_data, tests for it can be updated to use this flag. Suggested-by: NJames Hogan <jhogan@kernel.org> Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Maciej W. Rozycki <macro@mips.com> Cc: linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/19136/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Add phy to switch port connections for PCB123 for internal PHYs. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Ocelot has an integrated switch, add support for it. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
This work is now performed by the watchdog driver directly. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Acked-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
The watchdog is an useful piece of hardware, so there's no reason not to enable it. Besides, this is important for restart to work after the change in the next commit. This commit enables the Kconfig option in the qi_lb60 defconfig. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Acked-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
- The previous node requested a memory area of 0x100 bytes, while the driver only manipulates four registers present in the first 0x10 bytes. - The driver requests for the "rtc" clock, but the previous node did not provide any. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Reviewed-by: NMathieu Malaterre <malat@debian.org> Acked-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
Also remove the watchdog platform_device from platform.c, since it wasn't used anywhere anyway. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org [jhogan@kernel.org: Drop jz4740_wdt_device declaration from header] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
When the watchdog was configured for nowayout, and after the userspace watchdog daemon closed the dev node without sending the magic character, unloading this module stopped the watchdog hardware, which was clearly a problem. Besides, unloading the module is not possible when the userspace watchdog daemon is running, so it's safe to assume that we don't need to stop the watchdog hardware in the jz4740_wdt_remove() function. For this reason, the jz4740_wdt_remove() function can then be dropped alltogether. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
The watchdog driver can restart the system by simply configuring the hardware for a timeout of 0 seconds. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
- Use devm_clk_get instead of clk_get - Use devm_watchdog_register_device instead of watchdog_register_device Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Cercueil 提交于
Previously, the clock was disabled first, which makes the watchdog component insensitive to register writes. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in pr_warn message text. Signed-off-by: NColin Ian King <colin.king@canonical.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Andy Shevchenko 提交于
Re-use kstrtobool_from_user() instead of open coded variant. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Baolin Wang 提交于
Since struct timespec is not y2038 safe on 32bit machines, this patch converts update_persistent_clock() to update_persistent_clock64() using struct timespec64. The rtc_mips_set_time() and rtc_mips_set_mmss() interfaces were using 'unsigned long' type that is not y2038 safe on 32bit machines, moreover there is only one platform implementing rtc_mips_set_time() and two platforms implementing rtc_mips_set_mmss(), so we can just make them each implement update_persistent_clock64() directly, to get that helper out of the common mips code by removing rtc_mips_set_time() and rtc_mips_set_mmss() interfaces. Signed-off-by: NBaolin Wang <baolin.wang@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Baolin Wang 提交于
Since struct timespec is not y2038 safe on 32bit machines, this patch converts read_persistent_clock() to read_persistent_clock64() using struct timespec64, as well as converting mktime() to mktime64(). Signed-off-by: NBaolin Wang <baolin.wang@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Baolin Wang 提交于
The dummy read_persistent_clock() uses a timespec, which is not year 2038 safe on 32bit systems. Thus remove this obsolete interface. Signed-off-by: NBaolin Wang <baolin.wang@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19114/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 23 4月, 2018 18 次提交
-
-
由 Rafał Miłecki 提交于
This struct variable is used during init only. It gets passed to the gpio_led_register_device() which creates its own data copy. That allows using __initdata and saving some minimal amount of memory. Signed-off-by: NRafał Miłecki <rafal@milecki.pl> Reviewed-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18928/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Antony Pavlov 提交于
The commit b35cd988 ("lib: Add shared copies of some GCC library routines") makes it possible to share generic GCC library routines by several architectures. This commit removes several generic GCC library routines from arch/mips/lib/ in favour of similar routines from lib/. Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com> [Matt Redfearn] Use GENERIC_LIB_* named Kconfig entries Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19051/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
In preparation for removing some of the MIPS compiler intrinsics from arch/mips/lib, first update the build of vmlinuz to use the generic ashldi3 from lib. Both ashldi3 and bswapsi objects need to be built with different CFLAGS for inclusion to vmlinuz rather than simply including the object built for the main kernel image. The objects cannot be built directly from source, since CONFIG_MODVERSIONS changes cmd_cc_o_c to prevent this. Split the rule to ship ashldi3 and bswapsi from the relevant source locations. These files make no reference to other files in their directory, so the additional CFLAGS are apparently unnecessary - remove them as well. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19050/ [jhogan@kernel.org: Add if_changed and FORCE to fix build failure when arch/mips/boot/compressed/ashldi3.c is already generated but there is no .ashldi3.c.cmd file yet] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
When these are included into arch Kconfig files, maintaining alphabetical ordering of the selects means these get split up. To allow for keeping things tidier and alphabetical, rename the selects to GENERIC_LIB_* Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Acked-by: NPalmer Dabbelt <palmer@sifive.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-riscv@lists.infradead.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19049/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Palmer Dabbelt 提交于
As part of the MIPS conversion to use the generic GCC library routines, Matt Redfearn discovered that I'd missed a notrace on __ucmpdi2(). This patch rectifies the problem. Signed-off-by: NPalmer Dabbelt <palmer@sifive.com> Reviewed-by: NMatt Redfearn <matt.redfearn@mips.com> Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19048/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Rafał Miłecki 提交于
Some old devices with 4 MiB flashes were using 0x1000 block size and could use smaller (0x6000 bytes) flash partition for storing NVRAM content. This adds support for reading NVRAM on Netgear WNR1000 V3. Signed-off-by: NRafał Miłecki <rafal@milecki.pl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19005/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Rafał Miłecki 提交于
This adds support for detecting this model board and registers some LEDs and buttons. There are two uncommon things regarding this device: 1) It can use two different "board_id" ID values. Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used in firmware file header. There are two reports (one from an OpenWrt user) of a different "U12H139T50_NETGEAR" magic though. 2) Power LEDs share GPIOs with buttons. Amber one seems to share GPIO 2 with WPS button and green one seems to share GPIO 3 with reset button. It remains unknown how to support them and handle buttons at the same time. For that reason they aren't added to the list of supported LEDs. Signed-off-by: NRafał Miłecki <rafal@milecki.pl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19004/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Masahiro Yamada 提交于
arch/mips/boot/dts/Makefile collects objects from sub-directories into built-in.a only when CONFIG_BUILTIN_DTB is enabled. Reflect it also to the sub-directory Makefiles. This suppresses unneeded built-in.a creation in arch/mips/boot/dts/*/ directories. While I am here, I replaced $(patsubst %.dtb, %.dtb.o, $(dtb-y)) with $(addsuffix .o, $(dtb-y)) to simplify the code a little bit. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Mathieu Malaterre <malat@debian.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19099/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Linus Torvalds 提交于
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Exynos, i915, vc4, amdgpu fixes. i915: - an oops fix - two race fixes - some gvt fixes amdgpu: - dark screen fix - clk/voltage fix - vega12 smu fix vc4: - memory leak fix exynos just drops some code" * tag 'drm-fixes-for-v4.17-rc2' of git://people.freedesktop.org/~airlied/linux: (23 commits) drm/amd/powerplay: header file interface to SMU update drm/amd/pp: Fix bug voltage can't be OD separately on VI drm/amd/display: Don't program bypass on linear regamma LUT drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state drm/i915/audio: Fix audio detection issue on GLK drm/i915: Call i915_perf_fini() on init_hw error unwind drm/i915/bios: filter out invalid DDC pins from VBT child devices drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6 drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value drm/exynos: exynos_drm_fb -> drm_framebuffer drm/exynos: Move dma_addr out of exynos_drm_fb drm/exynos: Move GEM BOs to drm_framebuffer drm: Fix HDCP downstream dev count read drm/vc4: Fix memory leak during BO teardown drm/i915/execlists: Clear user-active flag on preemption completion drm/i915/gvt: Add drm_format_mod update drm/i915/gvt: Disable primary/sprite/cursor plane at virtual display initialization drm/i915/gvt: Delete redundant error message in fb_decode.c drm/i915/gvt: Cancel dma map when resetting ggtt entries drm/i915/gvt: Missed to cancel dma map for ggtt entries ...
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
- Fix a dark screen issue in DC - Fix clk/voltage dependency tracking for wattman - Update SMU interface for vega12 * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: header file interface to SMU update drm/amd/pp: Fix bug voltage can't be OD separately on VI drm/amd/display: Don't program bypass on linear regamma LUT
-
由 Dave Airlie 提交于
Merge tag 'exynos-drm-fixes-for-v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Remove Exynos specific framebuffer structure and relevant functions. - it removes exynos_drm_fb structure which is a wrapper of drm_framebuffer and unnecessary two exynos specific callback functions, exynos_drm_destory() and exynos_drm_fb_create_handle() because we can reuse existing drm common callback ones instead. * tag 'exynos-drm-fixes-for-v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: exynos_drm_fb -> drm_framebuffer drm/exynos: Move dma_addr out of exynos_drm_fb drm/exynos: Move GEM BOs to drm_framebuffer drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-next-fixes-2018-04-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix for FDO #105549: Avoid OOPS on bad VBT (Jani) - Fix rare pre-emption race (Chris) - Fix RC6 race against PM transitions (Tvrtko) * tag 'drm-intel-next-fixes-2018-04-19' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/audio: Fix audio detection issue on GLK drm/i915: Call i915_perf_fini() on init_hw error unwind drm/i915/bios: filter out invalid DDC pins from VBT child devices drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6 drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value drm/i915/execlists: Clear user-active flag on preemption completion drm/i915/gvt: Add drm_format_mod update drm/i915/gvt: Disable primary/sprite/cursor plane at virtual display initialization drm/i915/gvt: Delete redundant error message in fb_decode.c drm/i915/gvt: Cancel dma map when resetting ggtt entries drm/i915/gvt: Missed to cancel dma map for ggtt entries drm/i915/gvt: Make MI_USER_INTERRUPT nop in cmd parser drm/i915/gvt: Mark expected switch fall-through in handle_g2v_notification drm/i915/gvt: throw error on unhandled vfio ioctls
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
drm-misc-fixes: stable: vc4: Fix memory leak during BO teardown (Daniel) dp: Add i2c retry for LSPCON adapters (Imre) hdcp: Fix device count mask (Ramalingam) Cc: Daniel J Blueman <daniel@quora.org Cc: Imre Deak <imre.deak@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> * tag 'drm-misc-fixes-2018-04-18-1' of git://anongit.freedesktop.org/drm/drm-misc: drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state drm: Fix HDCP downstream dev count read drm/vc4: Fix memory leak during BO teardown
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "Various SMB3/CIFS fixes. There are three more security related fixes in progress that are not included in this set but they are still being tested and reviewed, so sending this unrelated set of smaller fixes now" * tag '4.17-rc1-SMB3-CIFS' of git://git.samba.org/sfrench/cifs-2.6: CIFS: fix typo in cifs_dbg cifs: do not allow creating sockets except with SMB1 posix exensions cifs: smbd: Dump SMB packet when configured cifs: smbd: Check for iov length on sending the last iov fs: cifs: Adding new return type vm_fault_t cifs: smb2ops: Fix NULL check in smb2_query_symlink
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "This contains a few fixups to the qgroup patches that were merged this dev cycle, unaligned access fix, blockgroup removal corner case fix and a small debugging output tweak" * tag 'for-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: print-tree: debugging output enhancement btrfs: Fix race condition between delayed refs and blockgroup removal btrfs: fix unaligned access in readdir btrfs: Fix wrong btrfs_delalloc_release_extents parameter btrfs: delayed-inode: Remove wrong qgroup meta reservation calls btrfs: qgroup: Use independent and accurate per inode qgroup rsv btrfs: qgroup: Commit transaction in advance to reduce early EDQUOT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Prevent X2APIC ID 0xFFFFFFFF from being treated as valid, which causes the possible CPU count to be wrong. - Prevent 32bit truncation in calc_hpet_ref() which causes the TSC calibration to fail - Fix the page table setup for temporary text mappings in the resume code which causes resume failures - Make the page table dump code handle HIGHPTE correctly instead of oopsing - Support for topologies where NUMA nodes share an LLC to prevent a invalid topology warning and further malfunction on such systems. - Remove the now unused pci-nommu code - Remove stale function declarations" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/power/64: Fix page-table setup for temporary text mapping x86/mm: Prevent kernel Oops in PTDUMP code with HIGHPTE=y x86,sched: Allow topologies where NUMA nodes share an LLC x86/processor: Remove two unused function declarations x86/acpi: Prevent X2APIC id 0xffffffff from being accounted x86/tsc: Prevent 32bit truncation in calc_hpet_ref() x86: Remove pci-nommu.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "A small set of timer fixes: - Evaluate the -ETIME condition correctly in the imx tpm driver - Fix the evaluation order of a condition in posix cpu timers - Use pr_cont() in the clockevents code to prevent ugly message splitting - Remove __current_kernel_time() which is now unused to prevent that new users show up. - Remove a stale forward declaration" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/imx-tpm: Correct -ETIME return condition check posix-cpu-timers: Ensure set_process_cpu_timer is always evaluated timekeeping: Remove __current_kernel_time() timers: Remove stale struct tvec_base forward declaration clockevents: Fix kernel messages split across multiple lines
-