- 01 6月, 2015 1 次提交
-
-
由 Daniel Pieczko 提交于
When Rx packet data must be dropped, all the buffers associated with that Rx packet must be freed. Extend and rename efx_free_rx_buffer() to efx_free_rx_buffers() and loop through all the fragments. By doing so this patch fixes a possible memory leak. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2015 6 次提交
-
-
由 David S. Miller 提交于
Ivan Vecera says: ==================== bna: misc bugfixes These patches fix several bugs found during device initialization debugging. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Driver starts iocpf timer prior bnad_ioceth_enable() call and this is unreasonable. This piece of code probably originates from Brocade/Qlogic out-of-box driver during initial import into upstream. This driver uses only one timer and queue to implement multiple timers and this timer is started at this place. The upstream driver uses multiple timers instead of this. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Firmware required by bna is stored in appropriate files as sequence of LE32 integers. After loading by request_firmware() they need to be byte-swapped on big-endian arches. Without this conversion the NIC is unusable on big-endian machines. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2015-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This just has a single docbook build fix. In my confusion I'd already sent the same fix for -next, but Ben Hutchings noted it's necessary in 4.1. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
br_multicast_query_expired() querier argument is a pointer to a struct bridge_mcast_querier : struct bridge_mcast_querier { struct br_ip addr; struct net_bridge_port __rcu *port; }; Intent of the code was to clear port field, not the pointer to querier. Fixes: 2cd41431 ("bridge: memorize and export selected IGMP/MLD querier port") Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NThadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: NLinus Lüssing <linus.luessing@c0d3.blue> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Steinar H. Gunderson <sesse@samfundet.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2015 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec由 David S. Miller 提交于
Steffen Klassert says: ==================== pull request (net): ipsec 2015-05-28 1) Fix a race in xfrm_state_lookup_byspi, we need to take the refcount before we release xfrm_state_lock. From Li RongQing. 2) Fix IV generation on ESN state. We used just the low order sequence numbers for IV generation on ESN, as a result the IV can repeat on the same state. Fix this by using the high order sequence number bits too and make sure to always initialize the high order bits with zero. These patches are serious stable candidates. Fixes from Herbert Xu. 3) Fix the skb->mark handling on vti. We don't reset skb->mark in skb_scrub_packet anymore, so vti must care to restore the original value back after it was used to lookup the vti policy and state. Fixes from Alexander Duyck. Please pull or let me know if there are problems. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roger Luethi 提交于
I don't have enough time to look after via-rhine anymore. Signed-off-by: NRoger Luethi <rl@hellgate.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2015 16 次提交
-
-
由 Jonathan Corbet 提交于
A couple of enums in mac80211.h became structures recently, but the comments didn't follow suit, leading to errors like: Error(.//include/net/mac80211.h:367): Cannot parse enum! Documentation/DocBook/Makefile:93: recipe for target 'Documentation/DocBook/80211.xml' failed make[1]: *** [Documentation/DocBook/80211.xml] Error 1 Makefile:1361: recipe for target 'mandocs' failed make: *** [mandocs] Error 2 Fix the comments comments accordingly. Added a couple of other small comment fixes while I was there to silence other recently-added docbook warnings. Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Alexander Duyck 提交于
The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified after completing the function. This resulted in the original skb->mark value being lost. Since we only need skb->mark to be set for xfrm_policy_check we can pull the assignment into the rcv_cb calls and then just restore the original mark after xfrm_policy_check has been completed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Alexander Duyck 提交于
This change makes it so that if a tunnel is defined we just use the mark from the tunnel instead of the mark from the skb header. By doing this we can avoid the need to set skb->mark inside of the tunnel receive functions. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Alexander Duyck 提交于
Instead of modifying skb->mark we can simply modify the flowi_mark that is generated as a result of the xfrm_decode_session. By doing this we don't need to actually touch the skb->mark and it can be preserved as it passes out through the tunnel. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "Back from SambaXP - now have 8 small CIFS bug fixes to merge" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix race condition on RFC1002_NEGATIVE_SESSION_RESPONSE Fix to convert SURROGATE PAIR cifs: potential missing check for posix_lock_file_wait Fix to check Unique id and FileType when client refer file directly. CIFS: remove an unneeded NULL check [cifs] fix null pointer check Fix that several functions handle incorrect value of mapchars cifs: Don't replace dentries for dfs mounts
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Don't use MMIO on certain iwlwifi devices otherwise we get a firmware crash. 2) Don't corrupt the GRO lists of mac80211 contexts by doing sends via timer interrupt, from Johannes Berg. 3) SKB tailroom is miscalculated in AP_VLAN crypto code, from Michal Kazior. 4) Fix fw_status memory leak in iwlwifi, from Haim Dreyfuss. 5) Fix use after free in iwl_mvm_d0i3_enable_tx(), from Eliad Peller. 6) JIT'ing of large BPF programs is broken on x86, from Alexei Starovoitov. 7) EMAC driver ethtool register dump size is miscalculated, from Ivan Mikhaylov. 8) Fix PHY initial link mode when autonegotiation is disabled in amd-xgbe, from Tom Lendacky. 9) Fix NULL deref on SOCK_DEAD socket in AF_UNIX and CAIF protocols, from Mark Salyzyn. 10) credit_bytes not initialized properly in xen-netback, from Ross Lagerwall. 11) Fallback from MSI-X to INTx interrupts not handled properly in mlx4 driver, fix from Benjamin Poirier. 12) Perform ->attach() after binding dev->qdisc in packet scheduler, otherwise we can crash. From Cong WANG. 13) Don't clobber data in sctp_v4_map_v6(). From Jason Gunthorpe. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) sctp: Fix mangled IPv4 addresses on a IPv6 listening socket net_sched: invoke ->attach() after setting dev->qdisc xen-netfront: properly destroy queues when removing device mlx4_core: Fix fallback from MSI-X to INTx xen/netback: Properly initialize credit_bytes net: netxen: correct sysfs bin attribute return code tools: bpf_jit_disasm: fix segfault on disabled debugging log output unix/caif: sk_socket can disappear when state is unlocked amd-xgbe-phy: Fix initial mode when autoneg is disabled net: dp83640: fix improper double spin locking. net: dp83640: reinforce locking rules. net: dp83640: fix broken calibration routine. net: stmmac: create one debugfs dir per net-device net/ibm/emac: fix size of emac dump memory areas x86: bpf_jit: fix compilation of large bpf programs net: phy: bcm7xxx: Fix 7425 PHY ID and flags iwlwifi: mvm: avoid use-after-free on iwl_mvm_d0i3_enable_tx() iwlwifi: mvm: clean net-detect info if device was reset during suspend iwlwifi: mvm: take the UCODE_DOWN reference when resuming iwlwifi: mvm: BT Coex - duplicate the command if sent ASYNC ...
-
由 Jason Gunthorpe 提交于
sctp_v4_map_v6 was subtly writing and reading from members of a union in a way the clobbered data it needed to read before it read it. Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the result. Reorder things to guarantee correct behaviour no matter what the union layout is. This impacts user space clients that open an IPv6 SCTP socket and receive IPv4 connections. Prior to 299ee user space would see a sockaddr with AF_INET and a correct address, after 299ee the sockaddr is AF_INET6, but the address is wrong. Fixes: 299ee123 (sctp: Fixup v4mapped behaviour to comply with Sock API) Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
xennet_remove() freed the queues before freeing the netdevice which results in a use-after-free when free_netdev() tries to delete the napi instances that have already been freed. Fix this by fully destroy the queues (which includes deleting the napi instances) before freeing the netdevice. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "This tree includes: - a fix that disables the compacted FPU XSAVE format by disabling XSAVES support: the fixes are too complex and the breakages ABI-affecting, so we want this to be quirked off in a robust way and backported, to make sure no broken kernel is exposed to the new hardware (which exposure is still very limited). - an MCE printk message fix - a documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Disable XSAVES* support for now x86/Documentation: Update the contact email for L3 cache index disable functionality x86/mce: Fix MCE severity messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha由 Linus Torvalds 提交于
Pull alpha updates from Matt Turner: "Please pull a small collection of patches that I've been neglecting. Probably most importantly are the patches that wire up the new syscalls needed by udev and the fix to the bootp{,z}file targets" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: kernel: osf_sys: Set 'kts.tv_nsec' only when 'tv' has effect alpha: Wire up all missing implemented syscalls alpha: Fix bootpfile and bootpzfile make targets alpha: copy_thread(): rename 'arg' argument to 'kthread_arg' alpha: delete non-required instances of <linux/init.h> alpha: don't use module_init for non-modular core code smp, alpha: kill SMP single function call interrupt alpha: Remove #include <uapi/asm/types.h> from <asm/types.h> alpha: clean up unnecessary MSI/MSI-X capability find
-
由 Benjamin Poirier 提交于
The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to fail with -EBUSY. It is also necessary to avoid the reset since the device is not fully reinitialized before calling mlx4_start_hca() a second time. Note that this will also affect mlx4_test_interrupts(), the only other user of MLX4_CMD_NOP. Fixes: f5aef5aa ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: NBenjamin Poirier <bpoirier@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
This bug has been there since day 1; addresses in the top guest physical page weren't considered valid. You could map that page (the check in check_gpte() is correct), but if a guest tried to put a pagetable there we'd check that address manually when walking it, and kill the guest. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Lagerwall 提交于
Commit e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull two overlayfs fixes from Miklos Szeredi: "Overlayfs rmdir() failed to check for emptiness in one case; this was introduced in 4.0. The other bug was there since day one: failure to mount if upper fs is full, which bit some OpenWRT folks" * 'overlayfs-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: mount read-only if workdir can't be created ovl: don't remove non-empty opaque directory
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull an MFD fix from Lee Jones: "One simple fix to repair broken regulator probe() in DA9052" * tag 'mfd-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: da9052: Fix broken regulator probe
-
- 27 5月, 2015 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight由 Linus Torvalds 提交于
Pull backlight fix from Lee Jones: "One simple fix to correctly handle -EPROBE_DEFER" * tag 'backlight-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm: Handle EPROBE_DEFER while requesting the PWM
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This disables the newly (4.1) added user-space AEAD interface so that we can fix issues in the underlying kernel AEAD interface. Once the new kernel AEAD interface is ready we can then reenable the user-space AEAD interface" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_aead - Disable AEAD user-space for now
-
由 Johan Hovold 提交于
Fix broken probe of da9052 regulators, which since commit b3f6c73d ("mfd: da9052-core: Fix platform-device id collision") use a non-deterministic platform-device id to retrieve static regulator information. Fortunately, adequate error handling was in place so probe would simply fail with an error message. Update the mfd-cell ids to be zero-based and use those to identify the cells when probing the regulator devices. Fixes: b3f6c73d ("mfd: da9052-core: Fix platform-device id collision") Cc: stable <stable@vger.kernel.org> # v3.19 Signed-off-by: NJohan Hovold <johan@kernel.org> Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NMark Brown <broonie@kernel.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Vladimir Zapolskiy 提交于
If read() syscall requests unexpected number of bytes from "dimm" binary attribute file, return EINVAL instead of EPERM. At the same time pin down sysfs file size to the fixed sizeof(struct netxen_dimm_cfg), which allows to exploit some missing sanity checks from kernfs (file boundary checks vs offset etc.) Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
With recent debugging, I noticed that bpf_jit_disasm segfaults when there's no debugging output from the JIT compiler to the kernel log. Reason is that when regexec(3) doesn't match on anything, start/end offsets are not being filled out and contain some uninitialized garbage from stack. Thus, we need zero out offsets first. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Salyzyn 提交于
got a rare NULL pointer dereference in clear_bit Signed-off-by: NMark Salyzyn <salyzyn@android.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. This patch fixes a bug introduced by: d9663c8c ("amd-xgbe-phy: Use phydev advertising field vs supported") Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2015-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have three more fixes: * AP_VLAN tailroom calculation fix, the bug leads to warnings along with dropped packets * NAPI context issue, calling napi_gro_receive() from a timer (obviously) can lead to crashes * remain-on-channel combining leads to dropped requests and not being able to finish certain operations, so remove it ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen Gang 提交于
The related warning: CC init/do_mounts.o arch/alpha/kernel/osf_sys.c: In function 'SyS_osf_settimeofday': arch/alpha/kernel/osf_sys.c:1028:14: warning: 'kts.tv_nsec' may be used uninitialized in this function [-Wmaybe-uninitialized] kts.tv_nsec *= 1000; ^ arch/alpha/kernel/osf_sys.c:1016:18: note: 'kts' was declared here struct timespec kts; ^ Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Chen Gang 提交于
And still left the missing unimplemented syscalls as warnings. The related warnings for missing implemented syscalls: CALL scripts/checksyscalls.sh <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp] <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp] <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp] Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Helge Deller 提交于
Fix the bootpfile and bootpzfile make targets to creat BOOTP images. Both targets were broken due to some missing defines to re-map ELF constants. In addition the old code used the generic vsprintf function of the kernel which we now replace by a simple and much smaller implementation for the bootloader. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Alex Dowad 提交于
The 'arg' argument to copy_thread() is only ever used when forking a new kernel thread. Hence, rename it to 'kthread_arg' for clarity (and consistency with do_fork() and other arch-specific implementations of copy_thread()). Signed-off-by: NAlex Dowad <alexinbeijing@gmail.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Acked-by: NRichard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Paul Gortmaker 提交于
The srm console is always built in. It will never be modular, so using module_init as an alias for __initcall is rather misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. Direct use of __initcall is discouraged, vs prioritized ones. Use of device_initcall is consistent with what __initcall maps onto, and hence does not change the init order, making the impact of this change zero. Should someone with real hardware for boot testing want to change it later to arch_initcall or console_initcall, they can do that at a later date. Reviewed-by: NRichard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NMatt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Jiang Liu 提交于
Commit 9a46ad6d "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NMatt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Signed-off-by: NJiang Liu <liuj97@gmail.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-