This allows gcc to fold duplicate calls into a single call.  Since
the current users do actually call it multiple times with the
same arguments, this is an obvious win.
Signed-off-by: NSteven Fuerst <svfuerst@gmail.com>

We use __fls() to find the most significant bit.  Using that, the
loop can be avoided.  A second trick is to use the behaviour of the
rotate instructions to expand the range of the unsigned int to float
conversion to the full 32 bits in a branchless way.

The routine is now exact up to 2^24.  Above that, we truncate which
is equivalent to rounding towards zero.
Signed-off-by: NSteven Fuerst <svfuerst@gmail.com>

Remove the copy of i2f() in r600_blit_kms.c
We rename the function to something longer now that it is a global
symbol.  This reduces the likelyhood of unintended clashes later.

This might be a candidate for inclusion inside general drm infrastructure.
However, at the moment only the radeon driver uses it.
Signed-off-by: NSteven Fuerst <svfuerst@gmail.com>

It was only used for dynpm, but has been replaced with
a better implementation using fences.  Remove it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Drop gui idle stuff, it's not as reliable as fences and only
covers the 3D engine.
2. Wait for fences on all rings.  This makes sure all rings are
idle when reclocking.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Stop the displays from accessing the FB
- Block CPU access
- Turn off MC client access

This should fix issues some users have seen, especially
with UEFI, when changing the MC FB location that result
in hangs or display corruption.

v2: fix crtc enabled check noticed by Luca Tettamanti
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This might be called before we've allocated the radeon_crtcs

v2: fix typo in array size
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This might be called before we've allocated the radeon_crtcs
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the new offset array rather than open coding it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This might be called before we've allocated the radeon_crtcs
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cards typically have 5-7 scratch registers; one of these is reserved for
rdev->rptr_save_reg. Unfortunately the reservation is done in function
r100_cp_init, which is called by all drivers except r600 - and this
function is also invoked on resume from suspend. After several resumes,
no scratch registers are free and graphics acceleration is disabled.

Dmesg then reports either:
   *ERROR* radeon: cp failed to get scratch reg (-22).
   *ERROR* radeon: cp isn't working(-22).
   radeon 0000:01:00.0: failed initializing CP (-22).
or:
   *ERROR* radeon: failed to get scratch reg (-22).
   *ERROR* radeon: failed testing IB on GFX ring (-22).
   *ERROR* ib ring test failed (-22).

The chain of calls on boot for all except r600 is:
radeon_init -> ... -> (rXXX_init) -> rXXX_startup -> r100_cp_init

The chain of calls on resume for all except r600 is:
rXXX_resume -> rXXX_startup -> r100_cp_init.

R600 correctly allocates rptr_save_reg in r600_init (ie once only, not
in resume). However moving the code into the init functions for all
drivers means touching 4 drivers. So instead, this patch just adds a
test in r100_cp_init to avoid reallocating on resume. As the rdev
structure is allocated via kzalloc in radeon_driver_load_kms, and zero
is not a valid registerid, zero safely implies not-yet-allocated.

This issue appears to have been introduced in c7eff978 (3.6.0-rcN)
Signed-off-by: NSimon Kitching <skitching@vonos.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 985f61f7.

This commit fixed certain cases, but ended up regressing others
due to limitations in the current KMS API.  A proper fix is too
invasive for 3.6.  Push it back to 3.7.
Reported-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Cc: stable@vger.kernel.org
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Alex writes:

This is the current set of radeon fixes for 3.6.  Two small fixes:
- fix the fence issues introduced in 3.5 with 64-bit fences
- PLL fix for multiple DP heads

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)

Only increase the higher 32bits if we really detect a wrap around.

v2: instead of increasing the higher 32bits just use the higher
    32bits from the last emitted fence.
v3: also use last emitted fence value as upper limit.

The intention of this patch is to make fences as robust as
they where before introducing 64bit fences. This is
necessary because on older systems it looks like the fence
value gets corrupted on initialization.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=51344

Should also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=54129
https://bugs.freedesktop.org/show_bug.cgi?id=54662
https://bugzilla.redhat.com/show_bug.cgi?id=846505
https://bugzilla.redhat.com/show_bug.cgi?id=845639

3.5 needs a separate patch due to changes in the
fence code.  Will send that out separately.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For DP we can use the same PPLL for all active DP
encoders.  Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work.  Also clean up the code
a bit.

v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
    - document functions
    - break in main encoder search loop after matching.
      no need to keep checking additional encoders.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes

Inki Dae writes:
- fix build warnings
- minor code cleanup
- remove non-standard format, DRM_FORMAT_NV12M
- add dummy mmap for exynos dmabuf
  . dma_buf export needs this patch

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file

The NV12M/YUV420M formats are identical to the NV12/YUV420 formats.
So just remove these duplicated format names.

This might look like breaking the ABI, but the code has never actually
accepted these formats, so nothing can be using them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

this patch removes DRM_FORMAT_NV12M from plane module because this format
is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by
mode_cmd->handles and mode_cmd->offsets fields internally.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin.park <kyungmin.park@samsung.com>

The double invocations are incorrect but seem to be safe so I don't
think this will fix any bugs.

Before:

[    7.639366] drm_prime_init_file ee3675d0
[    7.639377] drm_prime_init_file ee3675d0
[    7.639507] drm_prime_destroy_file ee3675d0
[    7.639518] drm_prime_destroy_file ee3675d0
[    7.639802] drm_prime_init_file ee372390
[    7.639810] drm_prime_init_file ee372390
[    8.473316] drm_prime_init_file ee356390
[    8.473331] drm_prime_init_file ee356390

After:

[    6.363842] drm_prime_init_file edc2e5d0
[    6.363994] drm_prime_destroy_file edc2e5d0
[    6.364260] drm_prime_init_file edc2e750
[    8.004837] drm_prime_init_file ee36ded0
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch adds a stub function for DMABUF mmap.
This allows to export a DMABUF.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fixes the following checkpatch warnings:
WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8)
WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4)
WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4)
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Fixes the following checkpatch warnings:
WARNING: sizeof *res should be sizeof(*res)
WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0])
WARNING: sizeof *res should be sizeof(*res)
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Fixes the following warning:
drivers/gpu/drm/exynos/exynos_drm_g2d.c:897:1: warning:
symbol 'g2d_pm_ops' was not declared. Should it be static?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Select Exynos DRM based G2D only if non-DRM based Exynos G2D driver
is not selected.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

do not align in page unit at dumb creation. the align is done
by exynos_drm_gem_create() to be called commonly.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

The semantic patch that makes this change is available
in scripts/coccinelle/api/err_cast.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_* functions are device managed functions and make error handling
and cleanup cleaner and simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_kzalloc is a device managed function and makes freeing and error
handling simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_kzalloc is a device managed function and makes freeing and error
handling simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_request_and_ioremap function checks the validity of the
pointer returned by platform_get_resource. Hence an additional check
in the probe function is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_request_and_ioremap function checks the validity of the
pointer returned by platform_get_resource. Hence an additional check
in the probe function is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Testing and works with the -modesetting driver,
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The register map patches didn't set one value for the GMA600 which
means the Fujitsu Q550 dies on boot with the GMA500 driver enabled.

Add the map entry so we don't read from the device MMIO + 0 by mistake.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Horses <stable@vger.kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Daniel writes:
"Nothing really major at all:
- fixup edp setup sequence (Dave)
- disable sdvo hotplug for real, this is a fixup for a messed-up
  regression fixer (Jani)
- don't expose dysfunctional backlight driver (Jani)
- properly init spinlock (only used by hsw/vlv code) from Alexander
  Shishkin"
along with a couple of more fixes on top.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: fix up the IBX transcoder B check
  drm/i915: set the right gen3 flip_done mode also at resume
  drm/i915: initialize dpio_lock spin lock
  drm/i915: do not expose a dysfunctional backlight interface to userspace
  drm/i915: only enable sdvo hotplug irq if needed
  drm/i915/edp: get the panel delay before powering up

Pull workqueue fixes from Tejun Heo:
 "It's later than I'd like but well the timing just didn't work out this
  time.

  There are three bug fixes.  One from before 3.6-rc1 and two from the
  new CPU hotplug code.  Kudos to Lai for discovering all of them and
  providing fixes.

   * Atomicity bug when clearing a flag and setting another.  The two
     operation should have been atomic but wasn't.  This bug has existed
     for a long time but is unlikely to have actually happened.  Fix is
     safe.  Marked for -stable.

   * If CPU hotplug cycles happen back-to-back before workers finish the
     previous cycle, the states could get out of sync and it could get
     stuck.  Fixed by waiting for workers to complete before finishing
     hotplug cycle.

   * While CPU hotplug is in progress, idle workers could be depleted
     which can then lead to deadlock.  I think both happening together
     is highly unlikely but still better to fix it and the fix isn't too
     scary.

  There's another workqueue related regression which reported a few days
  ago:

    https://bugzilla.kernel.org/show_bug.cgi?id=47301

  It's a bit of head scratcher but there is a semi-reliable reproduce
  case, so I'm hoping to resolve it soonish."

* 'for-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix possible idle worker depletion across CPU hotplug
  workqueue: restore POOL_MANAGING_WORKERS
  workqueue: fix possible deadlock in idle worker rebinding
  workqueue: move WORKER_REBIND clearing in rebind_workers() to the end of the function
  workqueue: UNBOUND -> REBIND morphing in rebind_workers() should be atomic

Pull crypto fixes from Herbert Xu:
 "This fixes the authenc self-test crash as well as a missing export of
  a symbol used by a module."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: authenc - Fix crash with zero-length assoc data
  crypto/caam: Export gen_split_key symbol for other modules

Pull blackfin updates from Bob Liu:
 "One kbuild and a smp build fix."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
  kbuild: add symbol prefix arg to kallsyms
  blackfin: smp: adapt to generic smp helpers

This has been added in

commit de9a35ab
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Jun 5 11:03:40 2012 +0200

    drm/i915: assert that the IBX port transcoder select w/a is implemented

Unfortunately I've failed to notice that these checks are not just
called for the port that is about to be disabled, but for all (which
makes sense for an assert ...), and the WARN missfired when disabling
another pipe than the one with the dp port.

Hence also check whether the port is actually disabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54688Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The authenc code doesn't deal with zero-length associated data
correctly and ends up constructing a zero-length sg entry which
causes a crash when it's fed into the crypto system.

This patch fixes this by avoiding the code-path that triggers
the SG construction if we have no associated data.

This isn't the most optimal fix as it means that we'll end up
using the fallback code-path even when we could still execute
the digest function.  However, this isn't a big deal as nobody
but the test path would supply zero-length associated data.
Reported-by: NRomain Francoise <romain@orebokech.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Tested-by: NRomain Francoise <romain@orebokech.com>