Pull exofs updates from Boaz Harrosh:
 "Trivial updates to exofs for 3.15-rc1

  Just a few fixes sent by people"

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  MAINTAINERS: Update email address for bhalevy
  fs: Mark functions as static in exofs/ore_raid.c
  fs: Mark function as static in exofs/super.c

Pull x86 platform driver updates from Matthew Garrett:
 "Support for the new keyboard features on the Thinkpad Carbon, a bunch
  of updates for the Sony and Toshiba drivers, a new driver for upcoming
  Alienware hardware and a few misc fixes.  There's a couple of patches
  that got Acked today but aren't invasive, so I'll send a further PR
  for them next week"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (28 commits)
  alienware-wmi: cover some scenarios where memory allocations would fail
  Add WMI driver for controlling AlienFX features on some Alienware products
  fujitsu-tablet: add support for Lifebook T901 and T902
  x86, platform: Make HP_WIRELESS option text more descriptive
  x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI
  save and restore adaptive keyboard mode for suspend and,resume
  support Thinkpad X1 Carbon 2nd generation's adaptive keyboard
  toshiba_acpi: Fix whitespace
  toshiba_acpi: Update version and copyright info
  toshiba_acpi: Add accelerometer support
  toshiba_acpi: Add ECO mode led support
  toshiba_acpi: Add touchpad enable/disable support-
  toshiba_acpi: Add keyboard backlight support
  toshiba_acpi: Adapt Illumination code to use SCI
  toshiba_acpi: Add System Configuration Interface
  thinkpad_acpi: Fix inconsistent mute LED after resume
  sonypi: Simplify dependencies
  Revert "X86 platform: New BayTrail IOSF-SB MBI driver"
  sony-laptop: remove useless sony-laptop versioning
  sony-laptop: add smart connect control function
  ...

Pull block layer fixes from Jens Axboe:
 "A small collection of fixes that should go in before -rc1.  The pull
  request contains:

   - A two patch fix for a regression with block enabled tagging caused
     by a commit in the initial pull request.  One patch is from Martin
     and ensures that SCSI doesn't truncate 64-bit block flags, the
     other one is from me and prevents us from double using struct
     request queuelist for both completion and busy tags.  This caused
     anything from a boot crash for some, to crashes under load.

   - A blk-mq fix for a potential soft stall when hot unplugging CPUs
     with busy IO.

   - percpu_counter fix is listed in here, that caused a suspend issue
     with virtio-blk due to percpu counters having an inconsistent state
     during CPU removal.  Andrew sent this in separately a few days ago,
     but it's here.  JFYI.

   - A few fixes for block integrity from Martin.

   - A ratelimit fix for loop from Mike Galbraith, to avoid spewing too
     much in error cases"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix regression with block enabled tagging
  scsi: Make sure cmd_flags are 64-bit
  block: Ensure we only enable integrity metadata for reads and writes
  block: Fix integrity verification
  block: Fix for_each_bvec()
  drivers/block/loop.c: ratelimit error messages
  blk-mq: fix potential stall during CPU unplug with IO pending
  percpu_counter: fix bad counter state during suspend

Pull sound fixes from Takashi Iwai:
 "Here is a bunch of small fixes that have been collected since the
  previous pull request.  In addition to various misc fixes, the
  following are included:

   - HD-audio quirks for Dell, HP, Chromebook, and ALC28x codecs
   - HD-audio AMD HDMI regression fix
   - Continued PM support/fixes for ice1712 driver
   - Multiplatform fixes for ASoC samsung drivers
   - Addition of device id tables to a few ASoC drivers
   - Bit clock polarity config and error flag fixes in ASoC fsl_sai"

* tag 'sound-fix-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
  ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()
  ALSA: hda - Make full_reset boolean
  ALSA: hda - add headset mic detect quirk for a Dell laptop
  sound: dmasound: use module_platform_driver_probe()
  ALSA: au1x00: use module_platform_driver()
  ALSA: hda - Use runtime helper to check active state.
  ALSA: ice1712: Fix boundary checks in PCM pointer ops
  ASoC: davinci-mcasp: Fix bit clock polarity settings
  ASoC: samsung: Fix build on multiplatform
  ASoC: fsl_sai: Fix Bit Clock Polarity configurations
  ALSA: hda - Do not assign streams in reverse order
  ALSA: hda/realtek - Add eapd shutup to ALC283
  ALSA: hda/realtek - Change model name alias for ChromeOS
  ASoC: da732x: Print correct major id
  ALSA: hda/realtek - Improve HP depop when system change power state on Chromebook
  ASoC: cs42l52: Fix mask for REVID
  sound/oss: Remove uncompilable DBG macro use
  ALSA: ice1712: Save/restore routing and rate registers
  ALSA: ice1712: restore AK4xxx volumes on resume
  ASoC: alc56(23|32): fix undefined return value of probing code
  ...

Pull thermal management updates from Zhang Rui:
 "We only have a couple of fixes/cleanups for platform thermal drivers
  this time.

  Specifics:

   - rcar thermal driver: avoid updating the thermal zone in case an IRQ
     was triggered but the temperature didn't effectively change.  From
     Patrick Titiano.

   - update the imx thermal driver' formula of converting thermal
     sensor' raw date to real temperature in degree C.  From Anson
     Huang.

   - trivial code cleanups of ti soc thermal and rcar thermal driver
     from Jingoo Han and Patrick Titiano"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: rcar-thermal: update thermal zone only when temperature changes
  thermal: rcar-thermal: fix same mask applied twice
  thermal: ti-soc-thermal: Use SIMPLE_DEV_PM_OPS macro
  thermal: imx: update formula for thermal sensor

Intel test builder caught a few instances that should test if kzalloc failed to
allocate memory as well as a scenario that platform_driver wasn't properly
initialized.
Signed-off-by: NMario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Pull LED updates from Bryan Wu:
 "This cycle we got:
   - new driver for leds-mc13783
   - bug fixes
   - code cleanup"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: make sure we unregister a trigger only once
  leds: leds-pwm: properly clean up after probe failure
  leds: clevo-mail: Make probe function __init
  leds-ot200: Fix dependencies
  leds-gpio: of: introduce MODULE_DEVICE_TABLE for module autoloading
  leds: clevo-mail: remove __initdata marker
  leds: leds-ss4200: remove __initdata marker
  leds: blinkm: remove unnecessary spaces
  leds: lp5562: remove unnecessary parentheses
  leds: leds-ss4200: remove DEFINE_PCI_DEVICE_TABLE macro
  leds: leds-s3c24xx: Trivial cleanup in header file
  drivers/leds: delete non-required instances of include <linux/init.h>
  leds: leds-gpio: add retain-state-suspended property
  leds: leds-mc13783: Add devicetree support
  leds: leds-mc13783: Remove unnecessary cleaning of registers on exit
  leds: leds-mc13783: Use proper "max_brightness" value fo LEDs
  leds: leds-mc13783: Use LED core PM functions
  leds: leds-mc13783: Add MC34708 LED support
  leds: Turn off led if blinking is disabled
  ledtrig-cpu: Handle CPU hot(un)plugging

Pull slave-dmaengine updates from Vinod Koul:
 - New driver for Qcom bam dma
 - New driver for RCAR peri-peri
 - New driver for FSL eDMA
 - Various odd fixes and updates thru the subsystem

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
  dmaengine: add Qualcomm BAM dma driver
  shdma: add R-Car Audio DMAC peri peri driver
  dmaengine: sirf: enable generic dt binding for dma channels
  dma: omap-dma: Implement device_slave_caps callback
  dmaengine: qcom_bam_dma: Add device tree binding
  dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
  dma: dw: allocate memory in two stages in probe
  Add new line to test result strings produced in verbose mode
  dmaengine: pch_dma: use tasklet_kill in teardown
  dmaengine: at_hdmac: use tasklet_kill in teardown
  dma: cppi41: start tear down only if channel is busy
  usb: musb: musb_cppi41: Dont reprogram DMA if tear down is initiated
  dmaengine: s3c24xx-dma: make phy->irq signed for error handling
  dma: imx-dma: Add missing module owner field
  dma: imx-dma: Replace printk with dev_*
  dma: fsl-edma: fix static checker warning of NULL dereference
  dma: Remove comment about embedding dma_slave_config into custom structs
  dma: mmp_tdma: move to generic device tree binding
  dma: mmp_pdma: add IRQF_SHARED when request irq
  dma: edma: Fix memory leak in edma_prep_dma_cyclic()
  ...

Pull backlight changes from Lee Jones:
 - core: call put_device() instead of kfree()
 - gpio-backlight: add DT support
 - lm3639_bl driver: use managed resources

* tag 'backlight-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: lm3639: Use devm_backlight_device_register()
  backlight: gpio-backlight: Add DT support
  backlight: core: Replace kfree with put_device

Martin reported that his test system would not boot with
current git, it oopsed with this:

BUG: unable to handle kernel paging request at ffff88046c6c9e80
IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150
PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm
rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon
CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246
Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
Workqueue: events_unbound async_run_entry_fn
task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000
RIP: 0010:[<ffffffff812971e0>]  [<ffffffff812971e0>]
blk_queue_start_tag+0x90/0x150
RSP: 0018:ffff880273d03a58  EFLAGS: 00010092
RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6
RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d
RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410
R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0
R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e
FS:  0000000000000000(0000) GS:ffff880277b00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0
Stack:
 ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000
 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62
 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8
Call Trace:
 [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510
 [<ffffffff81293167>] __blk_run_queue+0x37/0x50
 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130
 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0
 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0
 [<ffffffff813bba35>] scsi_execute+0xe5/0x180
 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110
 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod]
 [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0
 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod]
 [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod]
 [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140
 [<ffffffff8106a1c5>] process_one_work+0x175/0x410
 [<ffffffff8106b373>] worker_thread+0x123/0x400
 [<ffffffff8106b250>] ? manage_workers+0x160/0x160
 [<ffffffff8107104e>] kthread+0xce/0xf0
 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70
Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89
df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89
58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d
RIP  [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150
 RSP <ffff880273d03a58>
CR2: ffff88046c6c9e80

Martin bisected and found this to be the problem patch;

	commit 6d113398
	Author: Jan Kara <jack@suse.cz>
	Date:   Mon Feb 24 16:39:54 2014 +0100

	    block: Stop abusing rq->csd.list in blk-softirq

and the problem was immediately apparent. The patch states that
it is safe to reuse queuelist at completion time, since it is
no longer used. However, that is not true if a device is using
block enabled tagging. If that is the case, then the queuelist
is reused to keep track of busy tags. If a device also ended
up using softirq completions, we'd reuse ->queuelist for the
IPI handling while block tagging was still using it. Boom.

Fix this by adding a new ipi_list list head, and share the
memory used with the request hash table. The hash table is
never used after the request is moved to the dispatch list,
which happens long before any potential completion of the
request. Add a new request bit for this, so we don't have
cases that check rq->hash while it could potentially have
been reused for the IPI completion.
Reported-by: NMartin K. Petersen <martin.petersen@oracle.com>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

cmd_flags in struct request is now 64 bits wide but the scsi_execute
functions truncated arguments passed to int leading to errors. Make sure
the flags parameters are u64.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Jens Axboe <axboe@fb.com>
CC: Jan Kara <jack@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

BugLink: http://bugs.launchpad.net/bugs/1305133

Malfunctioning or slow devices can cause a flood of dmesg SPAM.

I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour
of prior art in sound/usb/pcm.c.

WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit
+	if (printk_ratelimit() &&

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v3.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.15

A smattering of device specific fixes, nothing stands out here except
for the multiplatform fixes for Samsung and the device IDs being added
by Stephen Warren - there's no real code changes from those and they
give better robustness to the enumeration with DT.

Pull i2c updates from Wolfram Sang:
 "Here is the pull request from the i2c subsystem.  It got a little
  delayed because I needed to wait for a dependency to be included
  (commit b424080a: "reset: Add optional resets and stubs").  Plus,
  I had some email problems.  All done now, the highlights are:

   - drivers can now deprecate their use of i2c classes.  That shouldn't
     be used on embedded platforms anyhow and was often blindly
     copy&pasted.  This mechanism gives users time to switch away and
     ultimately boot faster once the use of classes for those drivers is
     gone for good.

   - new drivers for QUP, Cadence, efm32

   - tracepoint support for I2C and SMBus

   - bigger cleanups for the mv64xxx, nomadik, and designware drivers

  And the usual bugfixes, cleanups, feature additions.  Most stuff has
  been in linux-next for a while.  Just some hot fixes and new drivers
  were added a bit more recently."

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (63 commits)
  i2c: cadence: fix Kconfig dependency
  i2c: Add driver for Cadence I2C controller
  i2c: cadence: Document device tree bindings
  Documentation: i2c: improve section about flags mangling the protocol
  i2c: qup: use proper type fro clk_freq
  i2c: qup: off by ones in qup_i2c_probe()
  i2c: efm32: fix binding doc
  MAINTAINERS: update I2C web resources
  i2c: qup: New bus driver for the Qualcomm QUP I2C controller
  i2c: qup: Add device tree bindings information
  i2c: i2c-xiic: deprecate class based instantiation
  i2c: i2c-sirf: deprecate class based instantiation
  i2c: i2c-mv64xxx: deprecate class based instantiation
  i2c: i2c-designware-platdrv: deprecate class based instantiation
  i2c: i2c-davinci: deprecate class based instantiation
  i2c: i2c-bcm2835: deprecate class based instantiation
  i2c: mv64xxx: Fix reset controller handling
  i2c: omap: fix usage of IS_ERR_VALUE with pm_runtime_get_sync
  i2c: efm32: new bus driver
  i2c: exynos5: remove unnecessary cast of void pointer
  ...

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.15:

  Core:
   - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
   - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
   - Add GPIO descriptor based slot-gpio card detect API

  Drivers:
   - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
   - mmci: Support HW busy detection on ux500
   - omap: Support MMC_ERASE
   - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
   - rtsx: Support pre-req/post-req async
   - sdhci: Add support for Realtek RTS5250 controllers
   - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
   - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
   - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"

* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
  mmc: sdhci-acpi: Intel SDIO has broken card detect
  mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
  mmc: sdhci-msm: Add platform_execute_tuning implementation
  mmc: sdhci-msm: Initial support for Qualcomm chipsets
  mmc: sdhci-msm: Qualcomm SDHCI binding documentation
  sdhci: only reprogram retuning timer when flag is set
  mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
  mmc: sdhci: Allow for irq being shared
  mmc: sdhci-acpi: Add device id 80860F16
  mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
  mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
  mmc: slot-gpio: Split out CD IRQ request into a separate function
  mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
  Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
  mmc: sdhci-spear: use generic card detection gpio support
  mmc: sdhci-spear: remove support for power gpio
  mmc: sdhci-spear: simplify resource handling
  mmc: sdhci-spear: fix platform_data usage
  mmc: sdhci-spear: fix error handling paths for DT
  mmc: sdhci-bcm-kona: fix build errors when built-in
  ...

Pull more powerpc updates from Ben Herrenschmidt:
 "Here are a few more powerpc things for you.

  So you'll find here the conversion of the two new firmware sysfs
  interfaces to the new API for self-removing files that Greg and Tejun
  introduced, so they can finally remove the old one.

  I'm also reverting the hwmon driver for powernv.  I shouldn't have
  merged it, I got a bit carried away here.  I hadn't realized it was
  never CCed to the relevant maintainer(s) and list(s), and happens to
  have some issues so I'm taking it out and it will come back via the
  proper channels.

  The rest is a bunch of LE fixes (argh, some of the new stuff was
  broken on LE, I really need to start testing LE myself !) and various
  random fixes here and there.

  Finally one bit that's not strictly a fix, which is the HVC OPAL
  change to "kick" the HVC thread when the firmware tells us there is
  new incoming data.  I don't feel like waiting for this one, it's
  simple enough, and it makes a big difference in console responsiveness
  which is good for my nerves"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (26 commits)
  powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_self
  Revert "powerpc/powernv: hwmon driver for power values, fan rpm and temperature"
  power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update
  powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules.
  arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.c
  powerpc/opal: Add missing include
  powerpc: Convert last uses of __FUNCTION__ to __func__
  powerpc: Add lq/stq emulation
  powerpc/powernv: Add invalid OPAL call
  powerpc/powernv: Add OPAL message log interface
  powerpc/book3s: Fix mc_recoverable_range buffer overrun issue.
  powerpc: Remove dead code in sycall entry
  powerpc: Use of_node_init() for the fakenode in msi_bitmap.c
  powerpc/mm: NUMA pte should be handled via slow path in get_user_pages_fast()
  powerpc/powernv: Fix endian issues with sensor code
  powerpc/powernv: Fix endian issues with OPAL async code
  tty/hvc_opal: Kick the HVC thread on OPAL console events
  powerpc/powernv: Add opal_notifier_unregister() and export to modules
  powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early
  powerpc/ppc64: Gracefully handle early interrupts
  ...

Jan Stancek reported:
 "pthread_cond_broadcast/4-1.c testcase from openposix testsuite (LTP)
  occasionally fails, because some threads fail to wake up.

  Testcase creates 5 threads, which are all waiting on same condition.
  Main thread then calls pthread_cond_broadcast() without holding mutex,
  which calls:

      futex(uaddr1, FUTEX_CMP_REQUEUE_PRIVATE, 1, 2147483647, uaddr2, ..)

  This immediately wakes up single thread A, which unlocks mutex and
  tries to wake up another thread:

      futex(uaddr2, FUTEX_WAKE_PRIVATE, 1)

  If thread A manages to call futex_wake() before any waiters are
  requeued for uaddr2, no other thread is woken up"

The ordering constraints for the hash bucket waiter counting are that
the waiter counts have to be incremented _before_ getting the spinlock
(because the spinlock acts as part of the memory barrier), but the
"requeue" operation didn't honor those rules, and nobody had even
thought about that case.

This fairly simple patch just increments the waiter count for the target
hash bucket (hb2) when requeing a futex before taking the locks.  It
then decrements them again after releasing the lock - the code that
actually moves the futex(es) between hash buckets will do the additional
required waiter count housekeeping.
Reported-and-tested-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NDavidlohr Bueso <davidlohr@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # 3.14
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We'd occasionally attempt to generate protection information for flushes
and other requests with a zero payload. Make sure we only attempt to
enable integrity for reads and writes.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit bf36f9cf caused a regression by effectively reverting Nic's
fix from 5837c80e that ensures we traverse the full bio_vec list
upon completion.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit 4550dd6c introduced for_each_bvec() which iterates over each
bvec attached to a bio or bip. However, the macro fails to check bi_size
before dereferencing which can lead to crashes while counting/mapping
integrity scatterlist segments.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NJens Axboe <axboe@fb.com>

The full_reset argument to azx_init_chip() carries boolean rather than
numerical information, so update the type to reflect that.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0283,
SID: 0x10280667), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Eliminate boilerplate code by using module_platform_driver_probe().
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Eliminate boilerplate code by using module_platform_driver().
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

From azx_interrupt, use the helper to check if the device is active
instead of checking the state.  This will do the right thing if
runtime pm is disabled in addition to if the device is suspended.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We are currently using sysfs_schedule_callback() which is deprecated
and about to be removed. Switch to the new interface instead.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This reverts commit 0de7f8a9.

This driver wasn't merged via the proper maintainers (my fault ... ooops !)
and has serious issues so let's take it out for now and have a new better
one be merged the right way
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
---

Since v1:
	Edited the comment according to Srivatsa's suggestion.

During the testing, we encounter below WARN followed by Oops:

	WARNING: at kernel/sched/core.c:6218
	...
	NIP [c000000000101660] .build_sched_domains+0x11d0/0x1200
	LR [c000000000101358] .build_sched_domains+0xec8/0x1200
	PACATMSCRATCH [800000000000f032]
	Call Trace:
	[c00000001b103850] [c000000000101358] .build_sched_domains+0xec8/0x1200
	[c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510
	[c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0
	[c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30
	...
	Oops: Kernel access of bad area, sig: 11 [#1]
	...
	NIP [c00000000045c000] .__bitmap_weight+0x60/0xf0
	LR [c00000000010132c] .build_sched_domains+0xe9c/0x1200
	PACATMSCRATCH [8000000000029032]
	Call Trace:
	[c00000001b1037a0] [c000000000288ff4] .kmem_cache_alloc_node_trace+0x184/0x3a0
	[c00000001b103850] [c00000000010132c] .build_sched_domains+0xe9c/0x1200
	[c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510
	[c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0
	[c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30
	...

This was caused by that 'sd->groups == NULL' after building groups, which
was caused by the empty 'sd->span'.

The cpu's domain contained nothing because the cpu was assigned to a wrong
node, due to the following unfortunate sequence of events:

1. The hypervisor sent a topology update to the guest OS, to notify changes
   to the cpu-node mapping. However, the update was actually redundant - i.e.,
   the "new" mapping was exactly the same as the old one.

2. Due to this, the 'updated_cpus' mask turned out to be empty after exiting
   the 'for-loop' in arch_update_cpu_topology().

3. So we ended up calling stop-machine() with an empty cpumask list, which made
   stop-machine internally elect cpumask_first(cpu_online_mask), i.e., CPU0 as
   the cpu to run the payload (the update_cpu_topology() function).

4. This causes update_cpu_topology() to be run by CPU0. And since 'updates'
   is kzalloc()'ed inside arch_update_cpu_topology(), update_cpu_topology()
   finds update->cpu as well as update->new_nid to be 0. In other words, we
   end up assigning CPU0 (and eventually its siblings) to node 0, incorrectly.

Along with the following wrong updating, it causes the sched-domain rebuild
code to break and crash the system.

Fix this by skipping the topology update in cases where we find that
the topology has not actually changed in reality (ie., spurious updates).

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Nathan Fontenot <nfont@linux.vnet.ibm.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Robert Jennings <rcj@linux.vnet.ibm.com>
CC: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
CC: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
CC: Alistair Popple <alistair@popple.id.au>
Suggested-by: N"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When building modules with a native le toolchain the linker will
generate R_PPC64_TOCSAVE relocations when it's safe to omit saving r2 on
a plt call.  This isn't helpful in the conext of a kernel module and the
kernel will fail to load those modules with an error like:
	nf_conntrack: Unknown ADD relocation: 109

This patch tells the linker to avoid createing R_PPC64_TOCSAVE
relocations allowing modules to load.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Here rcu_assign_pointer() is ensuring that the
initialization of a structure is carried out before storing a pointer
to that structure.
So, rcu_assign_pointer(p, NULL) can always safely be converted to
RCU_INIT_POINTER(p, NULL).
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

next-20140324 currently fails compiling celleb_defconfig with:

arch/powerpc/include/asm/opal.h:894:42: error: 'struct notifier_block' declared inside parameter list [-Werror]
arch/powerpc/include/asm/opal.h:894:42: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
arch/powerpc/include/asm/opal.h:896:14: error: 'struct notifier_block' declared inside parameter list [-Werror]

This is due to a missing include which is added here.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Just about all of these have been converted to __func__,
so convert the last uses.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Recent CPUs support quad word load and store instructions. Add
support to the alignment handler for them.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This call will not be understood by OPAL, and cause it to add an error
to it's log. Among other things, this is useful for testing the
behaviour of the log as it fills up.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

OPAL provides an in-memory circular buffer containing a message log
populated with various runtime messages produced by the firmware.

Provide a sysfs interface /sys/firmware/opal/msglog for userspace to
view the messages.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we wrongly allocate mc_recoverable_range buffer (to hold
recoverable ranges) based on size of the property "mcheck-recoverable-ranges".
This results in allocating less memory to hold available recoverable range
entries from /proc/device-tree/ibm,opal/mcheck-recoverable-ranges.

This patch fixes this issue by allocating mc_recoverable_range buffer based
on number of entries of recoverable ranges instead of device property size.
Without this change we end up allocating less memory and run into memory
corruption issue.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In:
  commit 742415d6
  Author: Michael Neuling <mikey@neuling.org>
  powerpc: Turn syscall handler into macros

We converted the syscall entry code onto macros, but in doing this we
introduced some cruft that's never run and should never have been added.

This removes that code.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch uses of_node_init() to initialize the kobject in the fake
node used in test_of_node(), to avoid following kobject warning.

[    0.897654] kobject: '(null)' (c0000007ca183a08): is not initialized, yet kobject_put() is being called.
[    0.897682] ------------[ cut here ]------------
[    0.897688] WARNING: at lib/kobject.c:670
[    0.897692] Modules linked in:
[    0.897701] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #1
[    0.897708] task: c0000007ca100000 ti: c0000007ca180000 task.ti: c0000007ca180000
[    0.897715] NIP: c00000000046a1f0 LR: c00000000046a1ec CTR: 0000000001704660
[    0.897721] REGS: c0000007ca1835c0 TRAP: 0700   Not tainted  (3.14.0+)
[    0.897727] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 28000024  XER: 0000000d
[    0.897749] CFAR: c0000000008ef4ec SOFTE: 1
GPR00: c00000000046a1ec c0000007ca183840 c0000000014c59b8 000000000000005c
GPR04: 0000000000000001 c000000000129770 0000000000000000 0000000000000001
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000003fef
GPR12: 0000000000000000 c00000000f221200 c00000000000c350 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 c00000000144e808 c000000000c56f20 00000000000000d8
GPR28: c000000000cd5058 0000000000000000 c000000001454ca8 c0000007ca183a08
[    0.897856] NIP [c00000000046a1f0] .kobject_put+0xa0/0xb0
[    0.897863] LR [c00000000046a1ec] .kobject_put+0x9c/0xb0
[    0.897868] Call Trace:
[    0.897874] [c0000007ca183840] [c00000000046a1ec] .kobject_put+0x9c/0xb0 (unreliable)
[    0.897885] [c0000007ca1838c0] [c000000000743f9c] .of_node_put+0x2c/0x50
[    0.897894] [c0000007ca183940] [c000000000c83954] .test_of_node+0x1dc/0x208
[    0.897902] [c0000007ca183b80] [c000000000c839a4] .msi_bitmap_selftest+0x24/0x38
[    0.897913] [c0000007ca183bf0] [c00000000000bb34] .do_one_initcall+0x144/0x200
[    0.897922] [c0000007ca183ce0] [c000000000c748e4] .kernel_init_freeable+0x2b4/0x394
[    0.897931] [c0000007ca183db0] [c00000000000c374] .kernel_init+0x24/0x130
[    0.897940] [c0000007ca183e30] [c00000000000a2f4] .ret_from_kernel_thread+0x5c/0x68
[    0.897947] Instruction dump:
[    0.897952] 7fe3fb78 38210080 e8010010 ebe1fff8 7c0803a6 4800014c e89f0000 3c62ff6e
[    0.897971] 7fe5fb78 3863a950 48485279 60000000 <0fe00000> 39000000 393f0038 4bffff80
[    0.897992] ---[ end trace 1eeffdb9f825a556 ]---
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We need to handle numa pte via the slow path
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

One OPAL call and one device tree property needed byte swapping.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>