task #29600094

commit a50ac6bfd6042b16e0de4ac3264c407e678c9b10 upstream.
Backport summary: for 4.19 kernel ICX PCIe Gen4 support.

Commit 89ee9f76 ("PCI: Add device disconnected state") iterates over
the devices on a parent bus, marks each as disconnected, then marks
each device's children as disconnected using pci_walk_bus().

The same can be achieved more succinctly by calling pci_walk_bus() on
the parent bus.  Moreover, this does not need to wait until acquiring
pci_lock_rescan_remove(), so move it out of that critical section.

The critical section in err.c contains a pci_dev_get() / pci_dev_put()
pair which was apparently copy-pasted from pciehp_pci.c.  In the latter
it serves the purpose of holding the struct pci_dev in place until the
Command register is updated.  err.c doesn't do anything like that, hence
the pair is unnecessary.  Remove it.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
(cherry picked from commit a50ac6bfd6042b16e0de4ac3264c407e678c9b10)
Signed-off-by: NEthan Zhao <haifeng.zhao@intel.com>
Signed-off-by: NArtie Ding <artie.ding@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

fix #29327388

This patch is inspired by commit eded341c085b ("don't decrement
nr_phys_segments for physically contigous segments"). Now the
ll_merge_requests_fn() will reduces nr_phys_segments by one if the
last segment of the previous, and the first segment of the next
segment are contigous. But that will mismatch the segment numbers
when handling discard request for virtio_block and nvme, moreover
if nvme queue selects IO scheduler, that also will mistrigger the
single segment optimization in the nvme-pci driver. Thus we should
not decrement nr_phys_segments in ll_merge_requests_fn().

But in __blk_recalc_rq_segments(), if we re-calculate the segments of
one request, we may get a different segment number, due to it will merge
physically contigous segments here. Originally we should simply remove
the bvec merging optimization under the assumption that most users already
build good enough bvecs, but we do not want to touch so many core logics
here, which may introduce more issues. So we can simply not allow to merge
contigous segments between 2 bios to fix this issue, and this is not in
the fast path, which will not affect the performance.

Fixes: dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests").
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #29499913

commit 2adaec46178be3b499e133923af227abbc23fb57 upstream

Fix timeout issue on some Ice Lake servers, where mail box command is
timing out before the response,
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 873e391ff33e742189cd7da5ed4bfd941e83edd7 upstream

The core mask display is wrong in some cases. This is showing more
cpus than the mask has. This is because mask is 64 bit but it used
with BIT() macro to get the presence of CPU which doesn't support
unsigned long long. Added a new macro for BIT_ULL and use that
to get the presence of a CPU.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit e16ea66365e43d5e3b338ba8d406dec38c6c3d39 upstream

Increase CPU count so that more than 64 is supported in one request.

For example:
sudo ./intel-speed-select -d --cpu 0-66 core-power assoc -clos 0
The above command stops at 63. With this change, it can support more
CPU numbers from 0-255.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit aa8b650b1aa2cb3cc9869795eac0ba8ffe4ea524 upstream

The 'intel-speed-select -f json perf-profile get-lock-status' command
outputs the package, die, and cpu data as separate fields.

ex)

  "package-0": {
    "die-0": {
      "cpu-0": {

Commit 74062363f855 ("tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json") prettied this output so that it is a single line for
some json output commands and the same should be done for other commands.

Output package, die, and cpu info in a single line when using json output.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 7983ed6f86d67c6bd5e1940b059ce76241f474c5 upstream

turbo-freq enable, requires clos enable. So this is a two step process,
when "-a" option is used. This is causing confusion to users. So enable
clos by default for turbo-freq enable.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 4c35527a92a0f9b63d7c1fae095ddfa5c8ac900f upstream

On CLX-N, the perf-profile-level's output is terminated before the
speed-select-base-freq-properties are output which results in a corrupt
json file.

Adjust the output of speed-select-base-freq-properties by one on CLX-N.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 28c59ae6965ca0626e3150e2f2863e0f0c810ed7 upstream

On CLX-N the perf-profile output is missing the package, die, and cpu
output.  On CLX-N the pkg_dev struct will never be evaluated by the core
code so pkg_dev.processed is always 0 and the package, die, and cpu
information is never output.

Set the pkg_dev.processed flag to 1 for CLX-N processors.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: andriy.shevchenko@linux.intel.com
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit e78fded4ca016a35e580595d08b3e149e174e120 upstream

When turbo-freq is enabled, we can't disable core-power. Currently
it prints debug message to warn. Change this to error message.

While here remove "\n" from calls to isst_display_error_info_message(),
as it will be added again during actual print.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 3d904f066f0f8778780bf8ae67ad756a2f99858c upstream

When turbo-freq or base-freq feature is not supported, the enable will
fail. So first check support status and print error.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 9945a2479893682bee8ae46e2ce5f180d4f6b1b2 upstream

This patch fix a spelling typo in error message.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 74062363f8556fb15834caf4be4212da065e6712 upstream

For platforms where multiple packages/die, this makes "Package-" key
duplicate. To make unique, add die and cpu id to key name.

So "Package-0" key name will change to "Package-0-die-x:cpu-x".

For example:
$sudo ./intel-speed-select -f json  perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
{
  "package-0:die-0:cpu-0": {
    "perf-profile-level-0": {
      "cpu-count": "32",
      "enable-cpu-count": "32",
...
...
 "package-1:die-0:cpu-16": {

    "perf-profile-level-0": {
      "cpu-count": "32",
      "enable-cpu-count": "32",
      "enable-cpu-mask": "ffff0000,ffff0000",
...
...

For non json format, there is no change. Here when print_package_info()
is called, it will return the level to print for other information.
This level is used formatting. Also in some function duplicate code
was there to print package,die and CPU information. Replace all that
code with a call to print_package_info().
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit e44d76569b19c03c786832d67782beb3c65e16ca upstream

In addition to total CPU count also display "enabled-cpu-count" for
perf-profile info command. This will show number of CPUs in the
"enable-cpu-mask".

For example:

 perf-profile-level-4
        cpu-count:32
        enable-cpu-count:16
        enable-cpu-mask:e42d0000,e42d0000
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 4a9603534aff2bc6e36f36144eb25731a888e835 upstream

When user specifies invalid option, display "Unknown Option: ignore",
instead of "no match". Also display error for garbage on the command
line.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit b86639e1957fe09362a1681b8a061aafacd1b486 upstream

Specifying "avx2" and "avx512" option for display filter doesn't work
with short option "-r", only works with --try-type. Also compare full
6 characters for "avx512" string.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 7fc9fefd994b3b0c6c4dc204a993f1a4c451f4d4 upstream

CLX doesn't have capability to change the feature in the hardware, but
this acts as "--auto | -a" option. So even if user didn't specify the
option, use this as --auto | -a to set cpufreq scaling frequency limits.

Also remove perror with debug_printf as they don't bring any value.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 070fdea13d4ba3ba6ae5a239fe334947921a1b9f upstream

When --cpu or -c is used to specify target CPUs and non of them are valid,
display error.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit fe6fb2165ade451d7a354787a8e4f00fa5bd3e44 upstream

This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 95f8e5694580cbf80599c6a5874cf4fba8b17141 upstream

Treat a case when mailbox/mmio command can't be handled by the kernel
drivers when the module is removed or send a command which no driver can
handle. In this case ENOTTY result is returned, so print error.

Also when the isst_if_mmio module is removed, we can't send CLOS message
messages via Mailbox on non SKX based platforms. When this module is
removed,  isst_platform_info.mmio_supported is set to 0. So it can't be
used as a condition to send via mailbox. Here replace check for Skylake
based platform to send via mailbox, other platforms can't use mailbox in
lieu of MMIO.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 3d1a8579813eff7d1d4b2f186bd718877407cfdb upstream

Improve output of perf-profile commands:
get-config-enabled
get-lock-status

Instead of showing 0/1, show meaningful strings. Also show error when
command is failed.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 68e2f109717b55daeec0565dda219b43bebcbb1d upstream

Enhance help to specify CPU and clos by an example.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 6d1f2dc8a5d9d1675e664c11ebecbcef739bf058 upstream

When priority type for core-power enable command is anything more than 1
display error before change to 1, which is ordered priority.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 6c8edba37cc58f44e02f846c4ab50702b64564fd upstream

Before looking for information about the base-freq or turbo-freq details,
first check if the feature is supported at that level. If not print error
and return.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit ac9d05ea4cfb99dd24767f2510ca526282fffa13 upstream

This change adds improved error display and handling for commands related
to perf-profile feature. The changes include:
- When invalid TDP level is passed. display error and exit
- Replace perror with helpful error message
- Show error when TDP level can't be set
- Print error when information can't be read for a level
- Validate user options for invalid level
- Display error for TDP lock status
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 87e115b3256c1c5a324ab495eab722c0ec7d5c34 upstream

Add a common API which can be used to print all error and information
messages. In this way a common format can be used.

For json output an error index in suffixed to make unique error key.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 1ba148ae9e11324817685a8b13f5968c4bc1cbfd upstream

Add additional information, which will allow user to detect available
features. This will allow users to check presence of features before
continue to test.
A sample output:

$sudo ./intel-speed-select --info

Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
Platform: API version : 1
Platform: Driver version : 1
Platform: mbox supported : 1
Platform: mmio supported : 0
Intel(R) SST-PP (feature perf-profile) is not supported
Only performance level 0 (base level) is present
TDP level change control is locked
Intel(R) SST-TF (feature turbo-freq) is supported
Intel(R) SST-BF (feature base-freq) is supported
Intel(R) SST-CP (feature core-power) is supported
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit addd116d8daf941485bf68eff22f43ff6525b76d upstream

Enhance help message which adds some example. The changes include:
- Print help when options are not recognized.
- For CLX, display only options which are applicable.
- Sort options in alphatical order.
- Disply help() instead of error:
"Feature name and|or command not specified"
- Remove duplicate display of
Intel(R) Speed Select Technology
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit f362cdccca07c2b90fc4fac9bf13d9ce975e9aa7 upstream

When the device file "/dev/isst_interface" is not present, instead of
failing on access, check at the start and print a helpful warning.

Here CLX platform is an exception, which doesn't depend on the device
file. So continue for CLX platform.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit fb186158283958984fecf7c1bbc0833dc76e375b upstream

Once the CPU is offline, the topology information (core-id, package-id,
die-id) is not accessible via sysfs. So when user selects a config level
more than base config 0 and offlined CPUs to match the config level,
to return to base config he has to manually online CPUs before. Without
this CPUs information mapping from Punit CPU numbering will lot work
as it needs atlest package id for each CPU.

To avoid this additional steps store the topology information in a file
, which is created on the very first run after boot. Since system boots
in base config and all CPUs are online, we can get information about
every CPU.

Once any of the APIs like get_physical_package_id(),
get_physical_core_id() or get_physical_die_id() fails to read from
sysfs, read from the stored mapping file.

This mapping file is stored in /tmp file system. so on every boot
it is recreated to make sure that any new CPUs are added to the
system before boot are taken into account.

But don't use the stored physical device id  when trying to get
information for CPU to send message in for_each_online_package_in_set().
Here use the real value from syfs and in case fails try the next CPU.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 864dc09e692f55fc7a5a87c7411da0a348ac1094 upstream

Currently /sys/devices/system/cpu/cpu0/topology/thread_siblings is used to
get the max CPU count. But when CPU0 is offline, then this file will be
absent.

So add processing so that we can get count from any first CPU in the
system. which is online.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 696691985c3191f2c4c76f09b1c7c5f3ca99d5ed upstream

When "-o" option for force online/offline is used with command:
perf-profile set-config-level

If the config level calls for CPU 0 online/offline, then call fails
as there is special kernel setup required for CPU 0 online/offline
and the currently not setup for that.

But when call is for online CPU 0, then don't fail. Just warn that
this system is not setup for CPU 0 online/offline.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 6320c9fb91212bc951b3a2d2cc2fceb1de4aea43 upstream

Instead of displaying 0 and 1 for enable status, display "disabled"
and "enabled" respectively.

Similarly for priority type, display "ordered or proportional" instead
of 0 and 1.

An example display:

$intel-speed-select -c 1 core-power info
Intel(R) Speed Select Technology
..
 package-0
  die-0
    cpu-1
      core-power
        support-status:supported
        enable-status:enabled
        clos-enable-status:enabled
        priority-type:proportional
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 143ad32209af647c76b4ce06144eb093375a8562 upstream

In addition to CLOS enable status, also show the core-power feature
status. This will help why clos enable status didn't give desired
results as the core-power feature may be disabled or unsupported.

The new display looks as follows:

$intel-speed-select core-power info
Intel(R) Speed Select Technology
..
 package-0
  die-0
    cpu-0
      core-power
        support-status:supported
        enable-status:enabled
        clos-enable-status:1
        priority-type:0

In the above display "support-status" and "enable-status", shows the
status of the core-power feature and "clos-enable-status", shows the
status of the clos.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit f5205f493100f1cdbecdf5498abb4c3dbdce08c5 upstream

Currently "-c" is a mandatory option for "core-power info" command. Make
this optional as this is a per package/die property. When not specified,
it will print info for every package/die.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit f0e0b4d17baaaf4968664f8fe79c66a7417aaab0 upstream

When CPU is offline, we can't get package id. So print error for this
and don't use output.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit d198b34f3855eee2571dda03eea75a09c7c31480 upstream

Add SPDX License Identifier to all .gitignore files.
erwei:
	Because the locations of the .gitignore files from the
	upstream are different from our kernel, I add the
	context "# SPDX-License-Identifier: GPL-2.0-only" to
	our onw .gitignore files.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit ced2f5304d1409805edd661b5f32092f3878be05 upstream

Here topology_max_cpus is used for total CPU count, not the last CPU
number. So remove "-1".
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 8ddbda76245f5d10e00020db34455404019efc91 upstream

Even for the products using MMIO, this message needs to be sent via
mail box. The previous fix done for this didn't properly address this.
That fix simply removed sending command via MMIO, but still didn't
trigger sending via mailbox.

Add additional condition to check for CLOS_PM_QOS_CONFIG, when MMIO
is supported on a platform.

Fixes: cd0e63706549 (tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG)
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 3b0fe3bab31fa7b320667e3d001eaa3f23590c05 upstream

For the command
"intel-speed-select perf-profile info":

There are two instances of “speed-select-turbo-freq” underneath
“perf-profile-level-0” for each package. When we load the output into
python with json.load(), the second instance overwrites the first.

Result is that we can only access:
"speed-select-turbo-freq": {
            "bucket-0": {
              "high-priority-cores-count": "2",
              "high-priority-max-frequency(MHz)": "3000",
              "high-priority-max-avx2-frequency(MHz)": "2800",
              "high-priority-max-avx512-frequency(MHz)": "2600"
            },
Because it is a duplicate of "speed-select-turbo-freq": "disabled"
Same is true for "speed-select-base-freq".

To avoid this add "-properties" suffix for the second instance to
differentiate.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>