- 07 3月, 2008 40 次提交
-
-
由 David Woodhouse 提交于
The struct enc_key probably wants to die too, but that can come later. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch fixes reporting rate in RX packets in 52 band. The rate was updated from CCK rate index instead of OFDM rate 6M Most of the patch is collateral clean up Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch refactors init geos function. It also fixes few minor bugs. IWL_MAX_RATE -> IWL_RATE_COUNT (IWL_MAX_RATE included also MCS setting) There are 9 and 13 rates for 4965 in 2.4 and 5.2 respectively (rate 60) Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes unused variable in iwlYYYY_priv Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds the Gigabit Ethernet driver for the SSB Gigabit Ethernet core. This driver actually is a frontend to the Tigon3 driver. So the real work is done by tg3. This device is used in the Linksys WRT350N. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The mac80211 MLME requires restarting timers after a scan completes but this wasn't done when hardware scan offload was added, so add it now. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Tested-by: NBill Moss <bmoss@clemson.edu> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Skip properly entries whose dev does not match. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Postponing the deletion is not really useful anymore. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This avoids dereferencing a no longer existing struct mesh_path. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Pointed out by Johannes Berg. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This patch fixes all the mesh related endianness warnings reported by sparse. As they were the reason why Johannes marked mesh as BROKEN, that flag has been removed. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Today I hit one of my new WARN_ONs in the mac80211 code because a key wasn't being freed correctly. After wondering for a while I finally tracked it to the fact that STA keys aren't added to the per-sdata key list correctly, they are supposed to always be on that list, not just for default keys. This patch fixes that. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This helps verify that nothing bad is going on in mac80211, it is unfortunately not possible to implement this generically in mac80211 easily because there we can't assume that we only have a single vif which b43 currently can assume. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
I noticed a bug I introduced when mesh is enabled: sta_info_destroy() will end up calling cancel_timer() on a timer that has never been initialized because the timer is only initialized in mesh_plink_alloc(), not in sta_info_alloc(). This patch moves the initialization of all mesh related fields into sta_info_alloc(), adds a bit of sanity checking to the cfg80211 handlers and sta_info_insert() and makes mesh_plink_alloc() a static helper function that is only used from the mesh plink code. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Quite a while ago I started this book. The required kernel-doc patches have since gone into the tree so it is now possible to build the book in mainline. The actual documentation is still rather incomplete and not all things are linked into the book, but this enables us to edit the documentation collaboratively, hopefully driver authors can add documentation based on their experience with mac80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Luis pointed out that this path is going to be freed right away anyway so there's no point in assigning next_hop. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When we take down an interface, we need to remove the STA info items that belong to it because otherwise we might invoke a sta_notify() callback in the driver when we later delete the STA entries, but in that case the driver will already have removed its knowledge of the interface they belonged to leading to confusion. Also, we could invoke the set_tim() callback after the driver removed its knowledge of the interface, which can lead to a crash if it requests a beacon with a then-invalid vif pointer! A side effect of this patch is that, because it was easier, it disallows changing the WDS peer while an interface is up. Should that actually be necessary, it can be added back, but the WDS peer STA entry may not be added while the interface is UP so for now I've simplified the WDS peer's STA entry lifetime management. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch cleans up the sta_info struct and documents how each set of variables is locked. Notably, flags locking is completely missing. It also adds kernel-doc for some (but not all yet) members of the struct. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
sta_info_add() has two functions: allocating a station info structure and inserting it into the hash table/list. Splitting these two functions allows allocating with GFP_KERNEL in many places instead of GFP_ATOMIC which is now required by the RCU protection. Additionally, in many places RCU protection is now no longer needed at all because between sta_info_alloc() and sta_info_insert() the caller owns the structure. This fixes a few race conditions with setting initial flags and similar, but not all (see comments in ieee80211_sta.c and cfg.c). More documentation on the existing races will be in a follow-up patch. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This makes access to the STA hash table/list use RCU to protect against freeing of items. However, it's not a true RCU, the copy step is missing: whenever somebody changes a STA item it is simply updated. This is an existing race condition that is now somewhat understandable. This patch also fixes the race key freeing vs. STA destruction by making sure that sta_info_destroy() is always called under RTNL and frees the key. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Split it into ieee80211_tx_data and ieee80211_rx_data to clarify usage/flag usage and remove the stupid union thing. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Three __le16s followed by an enum (int) leave a two-byte hole of padding which we can use for two of the other fields. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Accidentally copied in a __mesh_plink_deactivate, noticed by Luis Carlos Cobo. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Moves another ifdef into the sta_info header file in favour of compiling more code even w/o CONFIG_MAC80211_MESH. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This needs to be exported because rate control algorithms can be modular. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This clarifies that the mesh networking code is currently based on Draft 1.08 of the 802.11 Mesh Networking amendment. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This inserts a missing break statement which, if hit, would cause the code to fall-through and unlock a spinlock twice. Noticed via sparse's "lock count wrong in basic block" warning and careful code inspection. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Currently marked BROKEN because of endianness problems. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This fixes missing unlocks noticed by sparse. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Various cleanups, reducing the #ifdef mess and other things. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This completes the mesh interface handling code and a few other bits about the mac80211 module. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This adds code to allow adding mesh interfaces and configuring mesh peers etc. Also, it adds code for station dumping. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This patch contains the debugfs code for mesh statistics and configuration parameters. Please note that generic support for r/w debugfs attributes has been added. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This file implements the on-demand Hybrid Wireless Mesh Protocol, at this moment using hop-count as the metric. When no mesh path exists for a given destination or the mesh path is not active, frames addressed to that destination will be queued and a Path Request frame will be sent. Queued frames will be sent when the path is resolved (usually after reception of a Path Response) or discarded if discovery times out. Path Requests will also be sent to refresh paths that are being used and are close to expiring. Path Errors are sent when a path discovery process triggered by the attempt to forward a frame originated in a different mesh point times out. Path Errors are also sent when a peer link is determined to be unreachable because of high error rates. Multiple destination support in Path Requests and Path Errors and precursors have not been implemented yet. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
The mesh path table associates destinations with the next hop to reach them. The table is a hash of linked lists protected by rcu mechanisms. Every mesh path contains a lock to protect the mesh path state. Each outgoing mesh frame requires a look up into this table. Therefore, the table it has been designed so it is not necessary to hold any lock to find the appropriate next hop. If the path is determined to be active within a rcu context we can safely dereference mpath->next_hop->addr, since it holds a reference to the sta next_hop. After a mesh path has been set active for the first time it next_hop must always point to a valid sta. If this is not possible the mpath must be deleted or replaced in a RCU safe fashion. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-