commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.

Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.

E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.

Driver will set 63-bit DMA mask to ensure the above address will not be
used.

Cc: <stable@vger.kernel.org> # 4.19.63
Signed-off-by: NSuganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 17605afaae825b0291f80c62a7f6565879edaa8a upstream.

Since scsi_device_quiesce() skips SCSI devices that have another state than
RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not
complain about SCSI devices that have been skipped. Hence this patch.  This
patch avoids that the following warning appears during resume:

WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30
CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1
Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:blk_clear_pm_only+0x2a/0x30
Call Trace:
 ? scsi_device_resume+0x28/0x50
 ? scsi_dev_type_resume+0x2b/0x80
 ? async_run_entry_fn+0x2c/0xd0
 ? process_one_work+0x1f0/0x3f0
 ? worker_thread+0x28/0x3c0
 ? process_one_work+0x3f0/0x3f0
 ? kthread+0x10c/0x130
 ? __kthread_create_on_node+0x150/0x150
 ? ret_from_fork+0x1f/0x30

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: <stable@vger.kernel.org>
Reported-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Tested-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 3a0a5299 ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cd84a62e0078dce09f4ed349bec84f86c9d54b30 upstream.

The RQF_PREEMPT flag is used for three purposes:
- In the SCSI core, for making sure that power management requests
  are executed even if a device is in the "quiesced" state.
- For domain validation by SCSI drivers that use the parallel port.
- In the IDE driver, for IDE preempt requests.
Rename "preempt-only" into "pm-only" because the primary purpose of
this mode is power management. Since the power management core may
but does not have to resume a runtime suspended device before
performing system-wide suspend and since a later patch will set
"pm-only" mode as long as a block device is runtime suspended, make
it possible to set "pm-only" mode from more than one context. Since
with this change scsi_device_quiesce() is no longer idempotent, make
that function return early if it is called for a quiesced queue.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 78ff751f8e6a9446e9fb26b2bff0b8d3f8974cbd upstream.

A system bus error during a PDMA transfer can mess up the calculation of
the transfer residual (the PDMA handshaking hardware lacks a byte
counter). This results in data corruption.

The algorithm in this patch anticipates a bus error by starting each
transfer with a MOVE.B instruction. If a bus error is caught the transfer
will be retried. If a bus error is caught later in the transfer (for a
MOVE.W instruction) the transfer gets failed and subsequent requests for
that target will use PIO instead of PDMA.

This avoids the "!REQ and !ACK" error so the severity level of that message
is reduced to KERN_DEBUG.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
Fixes: 3a0f64bf ("mac_scsi: Fix pseudo DMA implementation")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Reported-by: NChris Jones <chris@martin-jones.com>
Tested-by: NStan Johnson <userm57@yahoo.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7398cee4c3e6aea1ba07a6449e5533ecd0b92cdd upstream.

Some targets introduce delays when handshaking the response to certain
commands. For example, a disk may send a 96-byte response to an INQUIRY
command (or a 24-byte response to a MODE SENSE command) too slowly.

Apparently the first 12 or 14 bytes are handshaked okay but then the system
bus error timeout is reached while transferring the next word.

Since the scsi bus phase hasn't changed, the driver then sets the target
borken flag to prevent further PDMA transfers. The driver also logs the
warning, "switching to slow handshake".

Raise the PDMA threshold to 512 bytes so that PIO transfers will be used
for these commands. This default is sufficiently low that PDMA will still
be used for READ and WRITE commands.

The existing threshold (16 bytes) was chosen more or less at random.
However, best performance requires the threshold to be as low as possible.
Those systems that don't need the PIO workaround at all may benefit from
mac_scsi.setup_use_pdma=1

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.14+
Fixes: 3a0f64bf ("mac_scsi: Fix pseudo DMA implementation")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Tested-by: NStan Johnson <userm57@yahoo.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c8f96df5b8e633056b7ebf5d52a9d6fb1b156ce3 upstream.

In megasas_get_target_prop(), driver is incorrectly calculating the target
ID for devices with channel 1 and 3.  Due to this, firmware will either
fail the command (if there is no device with the target id sent from
driver) or could return the properties for a target which was not
intended.  Devices could end up with the wrong queue depth due to this.

Fix target id calculation for channel 1 and 3.

Fixes: 96188a89 ("scsi: megaraid_sas: NVME interface target prop added")
Cc: stable@vger.kernel.org
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f9b0530fa02e0c73f31a49ef743e8f44eb8e32cc upstream.

When scsi_init_sense_cache(host) is called concurrently from different
hosts, each code path may find that no cache has been created and
allocate a new one. The lack of locking can lead to potentially
overriding a cache allocated by a different host.

Fix the issue by moving 'mutex_lock(&scsi_sense_cache_mutex)' before
scsi_select_sense_cache().

Fixes: 0a6ac4ee ("scsi: respect unchecked_isa_dma for blk-mq")
Cc: Stable <stable@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 25fcf94a2fa89dd3e73e965ebb0b38a2a4f72aa4 upstream.

This reverts commit 4822827a.

The purpose of that commit was to suppress a timeout warning message which
appeared to be caused by target latency. But suppressing the warning is
undesirable as the warning may indicate a messed up transfer count.

Another problem with that commit is that 15 ms is too long to keep
interrupts disabled as interrupt latency can cause system clock drift and
other problems.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 4822827a ("scsi: ncr5380: Increase register polling limit")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Tested-by: NStan Johnson <userm57@yahoo.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 57f31326518e98ee4cabf9a04efe00ed57c54147 upstream.

The reselection interrupt gets disabled during selection and must be
re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a
disconnected command may time-out or the target may wedge the bus while
trying to reselect the host. This can happen after a command is aborted.

Fix this by enabling the reselection interrupt in NCR5380_main() after
calls to NCR5380_select() and NCR5380_information_transfer() return.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.9+
Fixes: 8b00c3d5 ("ncr5380: Implement new eh_abort_handler")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Tested-by: NStan Johnson <userm57@yahoo.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6a162836997c10bbefb7c7ca772201cc45c0e4a6 upstream.

Replace a 'goto' statement with a simple 'return' where possible.  This
improves readability. No functional change.
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1ac3549ed58cdfdaf43bbf31ac260e2381cc0dae ]

The kernel panic was observed during iSCSI discovery via offload with below
call trace,

[ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60
[ 2115.646927] PGD 0
[ 2115.646932] Oops: 0000 [#1] SMP
[ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G
               OE  ------------   3.10.0-957.el7.x86_64 #1
[ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed]
[ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000
[ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>]  [<ffffffffacf7f0cc>] strncmp+0xc/0x60
[ 2115.647141] RSP: 0018:ffff8d66afb83c68  EFLAGS: 00010206
[ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a
[ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040
[ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff
[ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0
[ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8
[ 2115.647149] FS:  0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000
[ 2115.647151] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0
[ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2115.647155] PKRU: 00000000
[ 2115.647157] Call Trace:
[ 2115.647165]  [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi]
[ 2115.647184]  [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed]
[ 2115.647195]  [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed]
[ 2115.647206]  [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed]
[ 2115.647215]  [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660
[ 2115.647221]  [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580
[ 2115.647230]  [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed]
[ 2115.647278] RIP  [<ffffffffacf7f0cc>] strncmp+0xc/0x60

Fix kernel panic by validating the session targetname before providing TLV
data and confirming the presence of boot targets.
Signed-off-by: NNilesh Javali <njavali@marvell.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NChris Leech <cleech@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
  the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
  chaining.
Reviewed-by: NBader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NMatt Perricone <matt.perricone@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 240b4cc8fd5db138b675297d4226ec46594d9b3b upstream.

Once we unlock adapter->hw_lock in pvscsi_queue_lck() nothing prevents just
queued scsi_cmnd from completing and freeing the request. Thus cmd->cmnd[0]
dereference can dereference already freed request leading to kernel crashes
or other issues (which one of our customers observed). Store cmd->cmnd[0]
in a local variable before unlocking adapter->hw_lock to fix the issue.

CC: <stable@vger.kernel.org>
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cc8f52609bb4177febade24d11713e20c0893b0a ]

We need to drop the "ctrl_info->sync_request_sem" lock before returning.

Fixes: 6c223761 ("smartpqi: initial commit of Microsemi smartpqi driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1c90836f70f9a8ef7b7ad9e1fdd8961903e6ced6 ]

struct ufs_dev_cmd is the main container that supports device management
commands. In the case of a read descriptor request, we assume that the
proper space was allocated in dev_cmd to hold the returning descriptor.

This is no longer true, as there are flows that doesn't use dev_cmd for
device management requests, and was wrong in the first place.

Fixes: d44a5f98 (ufs: query descriptor API)
Signed-off-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Acked-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 24e2e7a19f7e4b83d0d5189040d997bce3596473 upstream.

UFS runtime suspend can be triggered after pm_runtime_enable() is invoked
in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered
before binding ufs_hba structure to ufs device structure via
platform_set_drvdata(), then UFS runtime suspend will be no longer
triggered in the future because its dev->power.runtime_error was set in the
first triggering and does not have any chance to be cleared.

To be more clear, dev->power.runtime_error is set if hba is NULL in
ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where
dev->power.runtime_error is set as -EINVAL. In this case, any future
rpm_suspend() for UFS device fails because rpm_check_suspend_allowed()
fails due to non-zero
dev->power.runtime_error.

To resolve this issue, make sure the first UFS runtime suspend get valid
"hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is
successfully bound to UFS device structure.

Fixes: 62694735 ([SCSI] ufs: Add runtime PM support for UFS host controller driver)
Cc: stable@vger.kernel.org
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778 ("[SCSI] aic94xx: new driver")
Reported-by: NJian Luo <luojian5@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 12e750bc62044de096ab9a95201213fd912b9994 ]

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:

BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045

CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G         C        5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
 dump_stack+0xa9/0x10e
 __kasan_report+0x171/0x18d
 ? __lock_acquire+0x6b4/0x1ee0
 kasan_report+0xe/0x20
 __lock_acquire+0x6b4/0x1ee0
 lock_acquire+0xb4/0x1b0
 __mutex_lock+0xd8/0xb90
 drain_workqueue+0x25/0x290
 destroy_workqueue+0x1f/0x3f0
 __x64_sys_delete_module+0x244/0x330
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 03197b61 ("scsi_dh_alua: Use workqueue for RTPG")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.
Signed-off-by: NLianbo Jiang <lijiang@redhat.com>
Acked-by: NDon Brace <don.brace@microsemi.com>
Tested-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ]

Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.

Addresses-Coverity: ("Bad shift operation")
Fixes: 7b594769 ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ]

There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort.  Add the check.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 79080d349f7f58a2e86c56043a3d04184d5f294a ]

Many of the exit cases were not releasing the rcu read lock.  Corrected the
exit paths.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d0adee5d12752256ff0c87ad7f002f21fe49d618 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect':
drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable]
drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable]

These have never been used since introduction.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c09581a52765a85f19fc35340127396d5e3379cc ]

KASAN reports this:

BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi]
Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429

CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x1c4/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 memcpy+0x1f/0x50 mm/kasan/common.c:130
 qedi_dbg_err+0xda/0x330 [qedi]
 ? 0xffffffffc12d0000
 qedi_init+0x118/0x1000 [qedi]
 ? 0xffffffffc12d0000
 ? 0xffffffffc12d0000
 ? 0xffffffffc12d0000
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003
RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

The buggy address belongs to the variable:
 __func__.67584+0x0/0xffffffffffffd520 [qedi]

Memory state around the buggy address:
 ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa
 ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
> ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
                                                          ^
 ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa
 ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa

Currently the qedi_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: ace7f46b ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0257eda08e806b82ee1fc90ef73583b6f022845c ]

Driver maintains state machine for processing and completing switch
commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the
previous command is active or sent, in order for next GPSC command to
advance the state machine.

[mkp: commit desc typo]
Signed-off-by: NGiridhar Malavali <gmalavali@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Prior to commit 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to
hardware queue structures") upstream, we allocated a cstat structure in
lpfc_nvme_create_localport. When commit faf5a744f4f8 ("scsi: lpfc: avoid
uninitialized variable warning") was backported, it was placed after the
allocation so we leaked memory whenever this function was called and
that conditional was true (so whenever CONFIG_NVME_FC is disabled).

Move the IS_ENABLED if statement above the allocation since it is not
needed when the condition is true.
Reported-by: NPavel Machek <pavel@denx.de>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ]

During debug, it was seen that the driver is issuing commands specific to
SLI3 on SLI4 devices. Although the adapter correctly rejected the command,
this should not be done.

Revise the code to stop sending these commands on a SLI4 adapter.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 32a80c093b524a0682f1c6166c910387b116ffce ]

The driver is reporting support for NVME even when not configured for NVME
operation.

Fix (and make more readable) when NVME protocol support is indicated.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d67f935b79a76ac9d86dde1a27bdd413feb5d987 ]

The FDMI manufacturer value being reported on Linux is inconsistent with
other OS's.

Set the value to "Emulex Corporation" for consistency.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 63a06181d7ce169d09843645c50fea1901bc9f0a ]

devm_reset_control_get could fail, so the fix checks its return value and
passes the error code upstream in case it fails.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Acked-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit faf5a744f4f8d76e7c03912b5cd381ac8045f6ec ]

clang -Wuninitialized incorrectly sees a variable being used without
initialization:

drivers/scsi/lpfc/lpfc_nvme.c:2102:37: error: variable 'localport' is uninitialized when used here
      [-Werror,-Wuninitialized]
                lport = (struct lpfc_nvme_lport *)localport->private;
                                                  ^~~~~~~~~
drivers/scsi/lpfc/lpfc_nvme.c:2059:38: note: initialize the variable 'localport' to silence this warning
        struct nvme_fc_local_port *localport;
                                            ^
                                             = NULL
1 error generated.

This is clearly in dead code, as the condition leading up to it is always
false when CONFIG_NVME_FC is disabled, and the variable is always
initialized when nvme_fc_register_localport() got called successfully.

Change the preprocessor conditional to the equivalent C construct, which
makes the code more readable and gets rid of the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 608f729c31d4caf52216ea00d20092a80959256d ]

Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA
memory in get_fw_boot_info() but attempt to free it anyway:

drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                if (!(val & 0x07)) {
                    ^~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here
        dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
                                                     ^~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true
                if (!(val & 0x07)) {
                ^~~~~~~~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning
        dma_addr_t buf_dma;
                          ^
                           = 0

Skip the call to dma_free_coherent() here.

Fixes: 2a991c21 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c5e06ba2f76809ad1492fdad312e81335df46bc5 ]

Fixes the following crash as the return was missing from the check if an
fcport is offloaded. If we hit this code we continue to try to post an
invalid task which can lead to the crash:

[30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet.
[30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020.
[30259.623769] BUG: unable to handle kernel NULL pointer dereference at 0000000000000198
[30259.631645] IP: [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.638816] PGD 0
[30259.640841] Oops: 0000 [#1] SMP
[30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me
[30259.715529]  mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G        W  OE  ------------   3.10.0-862.el7.x86_64 #1
[30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018
[30259.775000] task: ffff8c801efd0000 ti: ffff8c801efd8000 task.ti: ffff8c801efd8000
[30259.782505] RIP: 0010:[<ffffffffc035b1ed>]  [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.792116] RSP: 0018:ffff8c801efdbbb0  EFLAGS: 00010046
[30259.797444] RAX: 0000000000000000 RBX: ffffa7f1450948d8 RCX: ffff8c7fe5bc40c8
[30259.804600] RDX: ffff8c800715b300 RSI: ffffa7f1450948d8 RDI: ffff8c80169c2480
[30259.811755] RBP: ffff8c801efdbc30 R08: 00000000000000ae R09: ffff8c800a314540
[30259.818911] R10: ffff8c7fe5bc40c8 R11: ffff8c801efdb8ae R12: 0000000000000000
[30259.826068] R13: ffff8c800715b300 R14: ffff8c80169c2480 R15: ffff8c8005da28e0
[30259.833223] FS:  0000000000000000(0000) GS:ffff8c803f840000(0000) knlGS:0000000000000000
[30259.841338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[30259.847100] CR2: 0000000000000198 CR3: 000000081242e000 CR4: 00000000007607e0
[30259.854256] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[30259.861412] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[30259.868568] PKRU: 00000000
[30259.871278] Call Trace:
[30259.873737]  [<ffffffffc035c948>] qedf_post_io_req+0x148/0x680 [qedf]
[30259.880201]  [<ffffffffc035d070>] qedf_queuecommand+0x1f0/0x240 [qedf]
[30259.886749]  [<ffffffffa329b050>] scsi_dispatch_cmd+0xb0/0x240
[30259.892600]  [<ffffffffa32a45bc>] scsi_request_fn+0x4cc/0x680
[30259.898364]  [<ffffffffa3118ad9>] __blk_run_queue+0x39/0x50
[30259.903954]  [<ffffffffa3114393>] __elv_add_request+0xd3/0x260
[30259.909805]  [<ffffffffa311baf0>] blk_insert_cloned_request+0xf0/0x1b0
[30259.916358]  [<ffffffffc010b622>] map_request+0x142/0x220 [dm_mod]
[30259.922560]  [<ffffffffc010b716>] map_tio_request+0x16/0x40 [dm_mod]
[30259.928932]  [<ffffffffa2ebb1f5>] kthread_worker_fn+0x85/0x180
[30259.934782]  [<ffffffffa2ebb170>] ? kthread_stop+0xf0/0xf0
[30259.940284]  [<ffffffffa2ebae31>] kthread+0xd1/0xe0
[30259.945176]  [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40
[30259.951290]  [<ffffffffa351f61d>] ret_from_fork_nospec_begin+0x7/0x21
[30259.957750]  [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40
[30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b
[30259.983372] RIP  [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf]
[30259.990630]  RSP <ffff8c801efdbbb0>
[30259.994127] CR2: 0000000000000198
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3b141e8cfd54ba3e5c610717295b2a02aab26a05 ]

For regulators used by UFS, vcc, vccq and vccq2 will have voltage range
initialized by ufshcd_populate_vreg(), however other regulators may have
undefined voltage range if dt-bindings have no such definition.

In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg
struct will be zero values and these values will be configured on
regulators in different power modes.

Currently this may have no harm if both "min_uV" and "max_uV" always keep
"zero values" because regulator_set_voltage() will always bypass such
invalid values and return "good" results.

However improper values shall be fixed to avoid potential bugs.  Simply
bypass voltage configuration if voltage range is not defined.
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Acked-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0487fff76632ec023d394a05b82e87a971db8c03 ]

Currently if a regulator has "<name>-fixed-regulator" property in device
tree, it will skip current limit initialization.  This lead to a zero
"max_uA" value in struct ufs_vreg.

However, "regulator_set_load" operation shall be required on regulators
which have valid current limits, otherwise a zero "max_uA" set by
"regulator_set_load" may cause unexpected behavior when this regulator is
enabled or set as high power mode.

Similarly, in device's icc_level configuration flow, the target icc_level
shall be updated if regulator also has valid current limit, otherwise a
wrong icc_level will be calculated by zero "max_uA" and thus causes
unexpected results after it is written to device.
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Acked-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d8649fc1c5e40e691d589ed825998c36a947491c ]

When we discover the PHY is empty in sas_rediscover_dev(), the PHY
information (like negotiated linkrate) is not updated.

As such, for a user examining sysfs for that PHY, they would see
incorrect values:

root@(none)$ cd /sys/class/sas_phy/phy-0:0:20
root@(none)$ more negotiated_linkrate
3.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
3.0 Gbit

So fix this, simply discover the PHY again, even though we know it's empty;
in the above example, this gives us:

root@(none)$ more negotiated_linkrate
Phy disabled

We must do this after unregistering the device associated with the PHY
(in sas_unregister_devs_sas_addr()).
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f848bfd8e167210a29374e8a678892bed591684f ]

Sometimes during connection recovery when there is a failure to resolve
ARP, and offload connection was not issued, driver tries to flush pending
offload connection work which was not queued up.

kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0
kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11
kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018
kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0
kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1
f 84 00 00 00 00 00 0f 1f
kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000
kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0
kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0
kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000
kernel: FS:  00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0
kernel: Call Trace:
kernel: ? try_to_del_timer_sync+0x4d/0x80
kernel: qedi_ep_disconnect+0x3b/0x410 [qedi]
kernel: ? 0xffffffffc083c000
kernel: ? klist_iter_exit+0x14/0x20
kernel: ? class_find_device+0x93/0xf0
kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi]
kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi]
kernel: ? copyout+0x22/0x30
kernel: ? _copy_to_iter+0xa0/0x430
kernel: ? _cond_resched+0x15/0x30
kernel: ? __kmalloc_node_track_caller+0x1f9/0x270
kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi]
kernel: netlink_unicast+0x17f/0x230
kernel: netlink_sendmsg+0x2d2/0x3d0
kernel: sock_sendmsg+0x36/0x50
kernel: ___sys_sendmsg+0x280/0x2a0
kernel: ? timerqueue_add+0x54/0x80
kernel: ? enqueue_hrtimer+0x38/0x90
kernel: ? hrtimer_start_range_ns+0x19f/0x2c0
kernel: __sys_sendmsg+0x58/0xa0
kernel: do_syscall_64+0x5b/0x180
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 300ec7415c1fed5c73660f50c8e14a67e236dc0a ]

Since fc_remote_port_delete() must be called with interrupts enabled, do
not disable interrupts when calling that function. Remove the lockin calls
from around the put_sess() call. This is safe because the function that is
called when the final reference is dropped, qlt_unreg_sess(), grabs the
proper locks. This patch avoids that lockdep reports the following:

WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0

and this task is already holding:
00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
which would create a new lock dependency:
 (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&ha->tgt.sess_lock)->rlock){-...}

... which became HARDIRQ-irq-safe at:
  lock_acquire+0xe3/0x200
  _raw_spin_lock_irqsave+0x3d/0x60
  qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
  qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
  qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
  __handle_irq_event_percpu+0x79/0x3c0
  handle_irq_event_percpu+0x70/0xf0
  handle_irq_event+0x5a/0x8b
  handle_edge_irq+0x12c/0x310
  handle_irq+0x192/0x20a
  do_IRQ+0x73/0x160
  ret_from_intr+0x0/0x1d
  default_idle+0x23/0x1f0
  arch_cpu_idle+0x15/0x20
  default_idle_call+0x35/0x40
  do_idle+0x2bb/0x2e0
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x2a8/0x320
  secondary_startup_64+0xa4/0xb0

to a HARDIRQ-irq-unsafe lock:
 (&(&k->k_lock)->rlock){+.+.}

... which became HARDIRQ-irq-unsafe at:
...
  lock_acquire+0xe3/0x200
  _raw_spin_lock+0x32/0x50
  klist_add_tail+0x33/0xb0
  device_add+0x7e1/0xb50
  device_create_groups_vargs+0x11c/0x150
  device_create_with_groups+0x89/0xb0
  vtconsole_class_init+0xb2/0x124
  do_one_initcall+0xc5/0x3ce
  kernel_init_freeable+0x295/0x32e
  kernel_init+0x11/0x11b
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&ha->tgt.sess_lock)->rlock);

 *** DEADLOCK ***

3 locks held by kworker/2:1/62:
 #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80
 #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80
 #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 {
   IN-HARDIRQ-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock_irqsave+0x3d/0x60
                    qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                    qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                    qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                    __handle_irq_event_percpu+0x79/0x3c0
                    handle_irq_event_percpu+0x70/0xf0
                    handle_irq_event+0x5a/0x8b
                    handle_edge_irq+0x12c/0x310
                    handle_irq+0x192/0x20a
                    do_IRQ+0x73/0x160
                    ret_from_intr+0x0/0x1d
                    default_idle+0x23/0x1f0
                    arch_cpu_idle+0x15/0x20
                    default_idle_call+0x35/0x40
                    do_idle+0x2bb/0x2e0
                    cpu_startup_entry+0x1d/0x20
                    start_secondary+0x2a8/0x320
                    secondary_startup_64+0xa4/0xb0
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock_irqsave+0x3d/0x60
                   qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                   qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                   qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                   __handle_irq_event_percpu+0x79/0x3c0
                   handle_irq_event_percpu+0x70/0xf0
                   handle_irq_event+0x5a/0x8b
                   handle_edge_irq+0x12c/0x310
                   handle_irq+0x192/0x20a
                   do_IRQ+0x73/0x160
                   ret_from_intr+0x0/0x1d
                   default_idle+0x23/0x1f0
                   arch_cpu_idle+0x15/0x20
                   default_idle_call+0x35/0x40
                   do_idle+0x2bb/0x2e0
                   cpu_startup_entry+0x1d/0x20
                   start_secondary+0x2a8/0x320
                   secondary_startup_64+0xa4/0xb0
 }
 ... key      at: [<ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst]
 ... acquired at:
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
   qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
   qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
   process_one_work+0x511/0xa80
   worker_thread+0x67/0x5b0
   kthread+0x1d2/0x1f0
   ret_from_fork+0x3a/0x50

the dependencies between the lock to be acquired
 and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 13831 {
   HARDIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7e1/0xb50
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   SOFTIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7e1/0xb50
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock+0x32/0x50
                   klist_add_tail+0x33/0xb0
                   device_add+0x7e1/0xb50
                   device_create_groups_vargs+0x11c/0x150
                   device_create_with_groups+0x89/0xb0
                   vtconsole_class_init+0xb2/0x124
                   do_one_initcall+0xc5/0x3ce
                   kernel_init_freeable+0x295/0x32e
                   kernel_init+0x11/0x11b
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffff83ed8780>] __key.15491+0x0/0x40
 ... acquired at:
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
   qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
   qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
   process_one_work+0x511/0xa80
   worker_thread+0x67/0x5b0
   kthread+0x1d2/0x1f0
   ret_from_fork+0x3a/0x50

stack backtrace:
CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G           O      5.0.7-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst]
Call Trace:
 dump_stack+0x86/0xca
 check_usage.cold.52+0x473/0x563
 __lock_acquire+0x11c0/0x23e0
 lock_acquire+0xe3/0x200
 _raw_spin_lock_irqsave+0x3d/0x60
 klist_next+0x43/0x1d0
 device_for_each_child+0x96/0x110
 scsi_target_block+0x3c/0x40 [scsi_mod]
 fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
 qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
 qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
 qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
 process_one_work+0x511/0xa80
 worker_thread+0x67/0x5b0
 kthread+0x1d2/0x1f0
 ret_from_fork+0x3a/0x50

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d4023db71108375e4194e92730ba0d32d7f07813 ]

This patch avoids that lockdep reports the following warning:

=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.1.0-rc1-dbg+ #11 Tainted: G        W
-----------------------------------------------------
rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0

and this task is already holding:
00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
which would create a new lock dependency:
 (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&ha->tgt.sess_lock)->rlock){-...}

... which became HARDIRQ-irq-safe at:
  lock_acquire+0xe3/0x200
  _raw_spin_lock_irqsave+0x3d/0x60
  qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
  qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
  qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
  qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
  __handle_irq_event_percpu+0x79/0x3c0
  handle_irq_event_percpu+0x70/0xf0
  handle_irq_event+0x5a/0x8b
  handle_edge_irq+0x12c/0x310
  handle_irq+0x192/0x20a
  do_IRQ+0x73/0x160
  ret_from_intr+0x0/0x1d
  default_idle+0x23/0x1f0
  arch_cpu_idle+0x15/0x20
  default_idle_call+0x35/0x40
  do_idle+0x2bb/0x2e0
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x24d/0x2d0
  secondary_startup_64+0xa4/0xb0

to a HARDIRQ-irq-unsafe lock:
 (&(&k->k_lock)->rlock){+.+.}

... which became HARDIRQ-irq-unsafe at:
...
  lock_acquire+0xe3/0x200
  _raw_spin_lock+0x32/0x50
  klist_add_tail+0x33/0xb0
  device_add+0x7f4/0xb60
  device_create_groups_vargs+0x11c/0x150
  device_create_with_groups+0x89/0xb0
  vtconsole_class_init+0xb2/0x124
  do_one_initcall+0xc5/0x3ce
  kernel_init_freeable+0x295/0x32e
  kernel_init+0x11/0x11b
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&ha->tgt.sess_lock)->rlock);

 *** DEADLOCK ***

4 locks held by rmdir/1478:
 #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70
 #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0
 #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0
 #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 {
   IN-HARDIRQ-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock_irqsave+0x3d/0x60
                    qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
                    qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
                    qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
                    qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
                    __handle_irq_event_percpu+0x79/0x3c0
                    handle_irq_event_percpu+0x70/0xf0
                    handle_irq_event+0x5a/0x8b
                    handle_edge_irq+0x12c/0x310
                    handle_irq+0x192/0x20a
                    do_IRQ+0x73/0x160
                    ret_from_intr+0x0/0x1d
                    default_idle+0x23/0x1f0
                    arch_cpu_idle+0x15/0x20
                    default_idle_call+0x35/0x40
                    do_idle+0x2bb/0x2e0
                    cpu_startup_entry+0x1d/0x20
                    start_secondary+0x24d/0x2d0
                    secondary_startup_64+0xa4/0xb0
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock_irqsave+0x3d/0x60
                   qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx]
                   qla2x00_do_dpc+0xcee/0xf30 [qla2xxx]
                   kthread+0x1d2/0x1f0
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx]
 ... acquired at:
   __lock_acquire+0x11ed/0x1b60
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
   qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
   tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
   target_shutdown_sessions+0x17b/0x190 [target_core_mod]
   core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
   target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
   config_item_release+0x9f/0x120 [configfs]
   config_item_put+0x29/0x2b [configfs]
   configfs_rmdir+0x3d2/0x520 [configfs]
   vfs_rmdir+0xb3/0x1d0
   do_rmdir+0x25c/0x2d0
   __x64_sys_rmdir+0x24/0x30
   do_syscall_64+0x77/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

the dependencies between the lock to be acquired
 and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 14568 {
   HARDIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7f4/0xb60
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   SOFTIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7f4/0xb60
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock+0x32/0x50
                   klist_add_tail+0x33/0xb0
                   device_add+0x7f4/0xb60
                   device_create_groups_vargs+0x11c/0x150
                   device_create_with_groups+0x89/0xb0
                   vtconsole_class_init+0xb2/0x124
                   do_one_initcall+0xc5/0x3ce
                   kernel_init_freeable+0x295/0x32e
                   kernel_init+0x11/0x11b
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffff83f3d900>] __key.15805+0x0/0x40
 ... acquired at:
   __lock_acquire+0x11ed/0x1b60
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
   qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
   tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
   target_shutdown_sessions+0x17b/0x190 [target_core_mod]
   core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
   target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
   config_item_release+0x9f/0x120 [configfs]
   config_item_put+0x29/0x2b [configfs]
   configfs_rmdir+0x3d2/0x520 [configfs]
   vfs_rmdir+0xb3/0x1d0
   do_rmdir+0x25c/0x2d0
   __x64_sys_rmdir+0x24/0x30
   do_syscall_64+0x77/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

stack backtrace:
CPU: 7 PID: 1478 Comm: rmdir Tainted: G        W         5.1.0-rc1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0x86/0xca
 check_usage.cold.59+0x473/0x563
 check_prev_add.constprop.43+0x1f1/0x1170
 __lock_acquire+0x11ed/0x1b60
 lock_acquire+0xe3/0x200
 _raw_spin_lock_irqsave+0x3d/0x60
 klist_next+0x43/0x1d0
 device_for_each_child+0x96/0x110
 scsi_target_block+0x3c/0x40 [scsi_mod]
 fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
 qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
 qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
 tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
 target_shutdown_sessions+0x17b/0x190 [target_core_mod]
 core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
 target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
 config_item_release+0x9f/0x120 [configfs]
 config_item_put+0x29/0x2b [configfs]
 configfs_rmdir+0x3d2/0x520 [configfs]
 vfs_rmdir+0xb3/0x1d0
 do_rmdir+0x25c/0x2d0
 __x64_sys_rmdir+0x24/0x30
 do_syscall_64+0x77/0x220
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>