- Fix printk type warning:
drivers/media/dvb/b2c2/flexcop-pci.c:164: warning:
format '%08x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Hauppauge HVR 900 Composite support
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- fixed spelling error, exectuted --> executed.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add new internal VIDIOC_INT commands for setting the tuner mode,
for putting a chip into standby mode and to set/get the routing
of inputs/outputs of audio or video of a chip. These new commands
will replace older commands that are no longer up to the task.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- default_tuner_init was called twice due to a missing break statement.
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Acked-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Make needlessly global code static
- #if 0 the following unused global functions:
- b2c2/flexcop-dma.c: flexcop_dma_control_packet_irq()
- b2c2/flexcop-dma.c: flexcop_dma_config_packet_count()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Audmode and rxsubchans fixes in msp3400, tuner, tvaudio and cx25840.
- msp3400 cleanups
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- CodingStyle fixes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Implemented VIDIOC_G_FMT/S_FMT for sliced VBI
- VIDIOC_S_FMT now calls a function
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Fixed VBI compilation.
- Included capacity to specify vbi and video number.
- Added a better control for using more than one em28xx device.
- VIDIOC_G_FMT now calls a function.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Added iocls to configure VBI on tvp5150
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Moved some hardcoded minor numbers to videodev2.h
- Included more comments for sliced VBI standards
- Included some VBI macros to group similar standards
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- The tda9887 has an I2C id reserved for it, but it hasn't been using
it.  Probably an oversight.  Fixed with this patch.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- make VP-3054 Secondary I2C Bus Support a Kconfig option.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Recognise Hauppauge card #34519
Signed-off-by: NIan Pickworth <ian@pickworth.me.uk>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmv
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Kill nxt2002 module in favor of nxt200x.
- Repair broken nxt2002 support in the nxt200x module.
- Make the flexcop driver use nxt200x instead of the nxt2002 module for the
  Air2PC 2nd generation PCI card.
- Remove the nxt2002 module from cvs and kernel build.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- group dvb-bt8xx Subsystem ID's together, in order.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Implemented sliced VBI set on VIDIOC_S_FMT
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Mark Typhoon cards as OEM of Lifeview.
Signed-off-by: NPeter Missel <peter.missel@onlinehome.de>
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Added other sliced VBI types to videodev2.h
- tvp5150 now uses standard V4L2 API codes from videodev2.h
- Implemented VIDIOC_G_SLICED_VBI_CAP for tvp5150. This is
dynamically filled based on defined VDP C-RAM values filled
by the driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Renamed some registers and improved register debug message
- Some cleanups at register dump
- Added code to set VBI processor (VDP)
- VBI code still incomplete
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Added credits for sn9c102 kernel module and his author as
some parts of em28xx-video were based.
Acked-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Acked-by: NMarkus Rechberger <mrechberger@gmail.com>
Acked-by: NLudovico Cavedon <cavedon@sssup.it>
Acked-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Tvp5150 type were determined by a secondary register instead of
  using ROM code.
- tvp5150am1 have ROM=4.0, while tvp5150a have ROM=3.33 (decimal).
  All other ROM versions are reported as unknown tvp5150.
- Except for reporting, current code doesn't enable any special feature
  for tvp5150am1 or tvp5150a. Code should work for both models (but were
  tested only for tvp5150am1).
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- VIDEO_CX88_ALSA must select SND_PCM
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add probe check for the tda9840 to prevent misdetection of a Micronas
  dpl3518a as a tda9840.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Fix handling of VIDIOC_G_TUNER audmode in msp3400: audmode
is only changed by the user with S_TUNER, never by the driver.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Remove duplicated keymaps and add keymap for KWorld LTV883IR.
Thanks to Jon Ferguson <jon@sd-6.org>.
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- All the keymaps have the same structure, and can be shared between different
chips, so it makes no sense having them scattered between the input files.
This aggregates them all at ir-common module.
- Added new Hauppauge remote (Hauppauge grey), contributed by J.O. Aho
  <trizt@iname.com> (with some small changes)
  Changed KEY_KPx (keypad numerals) references to KEY_x, to avoid problems
  when NumLock is off (suggested by Peter Missel <peter.missel@onlinehome.de>)
- Some cleanups at IR code
Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- For the Hauppauge PVR cards there are at least two different remotes, one
  completly black and one that is Grey and black, they keys differ in values
  eg Black remotes 'mute' has the same value as Grey remotes 'menu'.
- This enables the user to select which keymapping to use by using the
  hauppauge parm. Unlike to the black remote keys, all keys are
  mapped for the grey remote and the ATi usb remote mappings has been
  followed.
Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add PCI ID for DigitalNow DVB-T Dual,
rebranded DViCO FusionHDTV DVB-T Dual.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The compat layer timeout handling changes in:

9f72949f

are busted.  This is most easily seen with an X application
that uses sub-second select/poll timeout such as emacs.  You
hit a key and it takes a second or so before the app responds.

The two ROUND_UP() calls upon entry are using {tv,ts}_sec where it
should instead be using {tv_usec,ts_nsec}, which perfectly explains
the observed incorrect behavior.

Another bug shot down with git bisect.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Or else we break on ppc32 and other 32-bit platforms.

Based upon a patch from Harald Welte.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix an unnecessary softlockup watchdog warning in the ia64
uncached_build_memmap() that occurs occasionally at 256p and always at
512p.  The problem occurs at boot time.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Migrate perfmon from using an old semaphore to a completion handler.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>